19-45-26 (MEPP, shipboard)
What is the A.C. output?
115 v.a.c., 3 phase, 400 hertz, Capacity: 45 k.v.a.
What is the turning radius of the MEPP?
13 feet
What is the lube oil capacity of the MEPP?
14 quarts
What is the power transmission fluid capacity?
15 gallons, 12 gallons in tank and 3 gallons in system
What is the main pump pressure for the MEPP?
1500 p.s.i.
What type of power transmission fluid does the MEPP use?
17111 ( triple sticks)
What is the fuel capacity of the MEPP?
18 gallons
How many minutes of cooling time is needed before starting attempts?
2 minutes
How many types of braking? What are they?
2, dynamic and static
Filters
25 micron and a water removing filter located in the return line
What is the main pump flow?
28 gallons per minute
What is the D.C. output?
28 v.d.c., Capacity: 1,000 amps
How long should you operate engine at idle before moving MODE SELECT switch?
3 to 5 minutes
Do not operate starter continuously more than...
30 seconds
What is the coolant capacity for the MEPP?
4.2 gallons
What does the coolant consist of?
50% water and 50% ethylene glycol
What is the main pump type?
Axial piston, variable displacement
What type of engine does the MEPP have?
Detroit diesel series 3-53, two cycle, three cylinders
What is the steering type for the MEPP?
Gear
Do not operate engine if..
Oil pressure is not above 10 psi within 15 seconds and 40-60 psi at idle within one minute after starting.
What type of tires?
Solid
What does the MEPP hydraulic system power?
The MEPP hydraulic system powers the rear wheel drive, steering, and brakes.
Charge pump
The charge pump is a positive displacement gear pump, which provides up to 7.4 gallons per minute at 220 p.s.i. to the inlet of the variable displacement pump. It is driven off the front of the hydrostatic pump.
What type of steering does the MEPP have?
hydraulic
Stop engine immediately if...
there is any abnormal condition, such as; squeaks, knocks, vibration, sudden gauge changes, smoke, vapor, or strange odor.
