3DS Max- Study Questions-First Test

¡Supera tus tareas y exámenes ahora con Quizwiz!

According to Professor's Bordeau's YouTube videos, what is my Outer Edge Breakup width flux set to?

20%

In Professor Bordeau YouTube videos, what is the radius1 of the Torus?

45.414

According to Professor's Bordeau's YouTube videos, I changed the height of the free hose to?

50

Objects such as trees, railings, walls, and so on are know as:

AEC Extended Objects

The following are Parameter rollouts of the Bend modifier:

Bend Area, Bend Axis Area, Limits Area

To create a Rectangular Spline that is a sqaure, Click the upper left corner of the viewport and hold the left mouse button and then drag the cursor to the lower right corner of the viewport while holding the _________________ key.

CTRL

Which of the following combinations of keys is used to choose the Pan tool?

CTRL +P

Which of the following is the extended primitives?

Capsule and Chamfer Box and Chamfer Cylinder

In the Parameters rollout of the Taper modifier, the Primary area is used to define the _______________ axis and the Effect area is used to define the _______________ from the primary axis.

Central, direction of the taper

Extended primitivies are found in the Menu Bar:

Create > Extended Primitives

Which of the following command sequences is followed to create a Hedra from the Command Panel?

Create > Geometry > Extended Primitives > Object Type rollout > Hendra

To create a Circular Spline from the Menu Bar:

Create > Shapes > Circle

To create a Elliptical Spline in the Command Panel:

Create > Shapes > Splines > Object Type rollout > Ellipse

In the Section Parameters rollout of the Section tool, the _____________ button is used to create a new section spline where the cross-section cuts the object.

Create shape

In Professor Bordeau YouTube videos, when rendering a still image, I choose which render?

Default Scanline Render

You need to select the _____________ and the ______________ check boxes in the _____________ rollout to make the splines visible as 3D mesh in the viewport and at rendering.

Enable in Renderer, Enable in Viewport, Rendering

Which of the following methods is used to create an arc dynamically?

End-End-Middle and Center-End-End

A Chamfer Box can not have rounded edges?

False

A Tube standard primitive looks like a inner tube or donut.

False

A capsule shape is made using the Chamfer Cylinder with the Capsule Radius and Height spinners checked on?

False

By default, all the scene explorers are local.

False

The Box, Sphere, Cylinder are the only standard primitives that can be created dynamically using the mouse or by specifying the parameters in the Keyboard Entry rollout of the Command Panel.

False

The L-Type Stairs must two stairways that are joined at a right angle.

False

The Taper modifier is used to bend an object in angular increments.

False

The Zoom Region tool is used to adjust the view of all objects in the viewports to display them properly.

False

The default Help Location is: Local Computer/Network.

False

The options in the General viewport label menu are used for defining the type of shading displayed in the viewport.

False

When creating Foliage, if the Automatic Materials is unselected, the tree will have no color displayed.

False

When creating Spiral Stairs in 3ds Max, a center pole is required.

False

While creating the clone of an object, you need to hold the CTRL key and drag the object.

False

in 3ds Max, a Projected Window has two panels in which the two panels swing in the directions opposite to each other.

False

Which of the following spinners is used to specify the number of segments in the fillet of a chamfer box?

Fillet Segs

A _____________ is a an extended primitive that can link two objects.

Hose

According to Professor Bordeau's YouTube videos, if I want to close the Line Spline?

I pick on the starting vertices

In the GeoSphere standard primitive, the Geodesic Base Type selected for 20-sided polygons and equilateral triangles is:

Icosa

An _________________ is a type of Clone Selection in the Mirror tool, in which the changes are reflected when they are made in the original object.

Instance

Which of the following rollouts is used to modify the panels of the doors?

Leaf Parameters

Which rollout is used to set the Horizontal and Vertical Panels of a door?

Leaf Parameters

In Professor Bordeau YouTube videos, "This is one of the most used viewport tools there is".

Maximize Viewport

________________ are used to apply various types of functions or effects on an object.

Modifiers

Which of the following tools is not part of the Extended Splines?

NGon

To change the Name and Color of a Box standard primitive, you must select:

Name and Color rollout

In the Favorite Plants rollout, the Plant Library shows:

Name, Fav., Scientific Name, Type, Description and # Faces

When using the Mirror tool, the default Clone Selection is:

No Clone

Which of the following tools is used to create spiral stairs?

None of these

When you select the stair in the viewport and choose the Modify tab in the Command Panel, the __________, ___________, ____________, and _____________ rollouts are displayed.

Parameters, Carriage, Railings, Stringers

On the right side of the Application Menu is the _________________________ page that provides information about the files that were previously saved in 3ds Max.

Recent Documents

A ________________ is a ring-shaped object that can have irregular inner and outer edges which can animated.

Ring Wave

Which of the following tools in the extended primitives does not have the Creation Method and Keyboard Entry rollouts?

RingWave and Hedra and Hose

The _____________________ is used to view, select, filter, and sort objects.

Scene Explorer

The ______________________ is used to view, filter, and sort objects.

Scene Explorer

You need to choose the ______________ tool and press and hold the _____________ key to select more than one object simultaneously in a viewport.

Select and Move, CTRL

This tool is used to position and orient an object with respect to another object.

Select and Place Tool

The ____________ tool located on the right of the status bar is used to lock a selection set.

Selection Lock Toggle

The _______________________ tool is used to set the single increment or decrement value for all spinners in Autodesk 3ds Max.

Spinner Snap Toogle

Which of the following options is available in the drop-down list when you choose the Shapes button in the Create tab of the Command Panel?

Splines and Extended Splines and NURBS Curves

The number of segments between each vertex on the line are called: ___________________.

Steps

In Professor Bordeau YouTube videos, what is the roughest or least smooth Geosphere?

Tetra

Which of the following radio buttons is selected by default in the Family area of the Parameters rollout while creating a Hedra?

Tetra

The _________________ displays the current frame and total number of frames in the current segment.

Time Slider

The ______________ is located between the time slider and the status bar.

Track bar

A Casement Window may have two panels?

True

A sliding door has two door components, one is fixed, whereas the other slides or moves over the fixed component to open.

True

An instance of an object is a clone in which the changes are reflected when they are made in the original object.

True

In the Family Parameters area of the parameters rollout of the hedra, the combined value of the P and Q spinners can be either equal to or less than 1.0

True

In the Parameters rollout of the chamfer cylinder, the Slice On check box is used to specify the start and end angle of the chamfer cylinder.

True

Snapping restricts the movement of the cursor to a specific part of an object or grid.

True

The Pie Slice check box in the Parameters rollout of the Arc tool is used to create a line from each endpoint to the center of the arc.

True

The Renderer radio button in the Rendering rollout is used to modify the parameters of a line at rendering.

True

The Viewport Layout tab bar enables you to store multiple viewport setups in a single scene.

True

To change the background color of a scene, you need to choose Rendering>Environment from the menu bar.

True

When modifying a tree, the value of 1.0 in the Pruning spinner shows a very pruned tree (i.e. reduced branches of the tree).

True

You can Stylize Viewports to look like: pastel, acrylic, or color pencil.

True

You can create default trees in the viewports by invoking the Foliage tool from the AEC Extended drop-down list.

True

In the Units Setup, this class will mainly use:

US Standard

The Weld Point? message box belongs to what tool?

Wall

The _____________________ spline is a I-shaped closed spline.

Wide Flange

Using the Mirror tool, the default value for the Mirror Axis Area is:

X

In the Limits area of the Parameters rollout of the Bend modifier, the default value in the Upper Limit and Lower Limit spinner is __________________.

Zero

Which of the following tools is used to display all objects in the viewports?

Zoom Extents All

The teapot has four parts:

body, handle, spout, lid

A spindle is a type of cylinder with ______________ caps.

conical

When creating a Sphere standard primitive, the Hemisphere spinner is used to:

create a partial sphere

According to Professor's Bordeau's YouTube videos, when creating a Hedra, you should start editing the ______________________ first?

family

The ______________ is placed in between the posts of the railing.

fencing

By default, the Generate Mapping Coords.

mapping coordinates are created automatically with a projection appropriate to the shape of the box.

Some of the _____________________ are standard window menus such as Edit, Help and so on while others are 3ds Max ___________________ such as Create, Modifiers, Animation, Graph Editors, Rendering, Customize, and so on.

pull-down menus

According to Professor's Bordeau's YouTube videos, the key to using the modifier command is?

setting the segments of the box to more than 1 segment

The Text tool is used to create a ______________ in the text shape.

spline

Which of the following three shapes of the polygonal facets of a polyhedron can have in the Axis Scaling area?

triangle, square, and pentagon

A polyhedron can have three shapes of a polygonal facets:

triangle, square, pentagon


Conjuntos de estudio relacionados

Financial Analysis - USCA MBA - CH4 SB

View Set

Ch 33: Agency Formation & Duties

View Set

Chapter 1: Introduction And How Cars Work

View Set

Microscopes - Light and Electron

View Set

What does it take to start an e-commerce business? (T)

View Set

International Supply Chain Management Test 3

View Set

Introduction into Pharmacokinetics

View Set