4.4.10 DHCP

¡Supera tus tareas y exámenes ahora con Quizwiz!

You have a network with 50 workstations. You want to automatically configure the workstations with the IP address, subnet mask, and default gateway values. Which device should you use?

DHCP server

At what percentage of the device's lease time does the DHCP renewal process occur?

At fifty percent

You have a TCP/IP network with 50 hosts. There have been inconsistent communication problems between these hosts. You run a protocol analyzer and discover that two of them have the same IP address assigned. Which protocol can you implement on your network to help prevent problems such as this?

DHCP

You've configured your organization's DHCP server to dynamically assign IP addresses to DHCP clients using a lease duration of four days. You're using a Windows server for DHCP, and the default lease time is eight days. What impact, if any, will this have on the network?

Increased network traffic

Which of the following strategies do we use to prevent duplicate IP addresses from being used on a network? (Select two.)

Install a DHCP server on the network. Install a DHCP server on the network.

Which of the following statements about Dynamic Host Configuration Protocol (DHCP) are true? (Select two.)

It can deliver other configuration information in addition to IP addresses. It can deliver other configuration information in addition to IP addresses.

When a device renews its DHCP lease, which two steps in the DHCP process are skipped?

Offer Discover

Which of the following DHCP scope options assigns a static IP configuration to a device using that device's MAC address?

Reservation

After you install a new DHCP server on your network, you need to verify that the network devices are receiving IP addressing via DHCP. You reboot a Windows 10 client system and, using the ipconfig /all command, receive the following information: Ethernet adapter Local Area Connection 1: Description . . . . . . . . . . . : Intel(R) Ethernet Connection Physical Address. . . . . . . . . : 02-00-4C-4F-3F-50 DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes Autoconfiguration IPv4 Address. . : 169.254.25.129 Subnet Mask . . . . . . . . . . . : 255.255.0.0 Default Gateway . . . . . . . . . : DNS Servers . . . . . . . . . . . : Which of the following statements are true? (Select two).

The client system is unable to reach the DHCP server. The client system is configured to use DHCP.

Due to wide network expansion, you've decided to upgrade your network by configuring a DHCP server. The network uses Linux, Windows, and Mac OS X client systems. You configure the server to distribute IP addresses from 192.168.2.1 to 192.168.2.100. You use the subnet mask of 255.255.255.0. After you make all the setting changes on the DHCP server, you reboot each client system, but they are not able to obtain an IP address from the DHCP server. Which of the following explains the failure?

You must configure the clients to obtain IP addressing from a DHCP server.


Conjuntos de estudio relacionados

US History (American Pageant) Unit 7

View Set

Missed quiz questions after course completion

View Set

NCLEX review 8/6/16 Hesi wrong answers

View Set

Supplement 7 Capacity and Constraint Management

View Set

Chapter 7: Trust, Justice, and Ethics

View Set

Intro to Coding - Conditional Statements

View Set