A level Chemistry Topic 17/18 - Organics II & III

¡Supera tus tareas y exámenes ahora con Quizwiz!

Grignard + Carbon dioxide

(Form Grignard : CH₃CH₂Br + Mg → CH₃CH₂MgBr (ether)) 1) React by bubbling through dry CO₂ CH₃CH₂MgBr + CO₂ → CH₃CH₂COOMgBr 2) Hydrolysis with acid CH₃CH₂COOMgBr + H₂O →(H⁺)→ CH₃CH₂COOH + Mg(OH)Br

Grignard + Carbonyl Compounds

(form grignard) 1) Add grignard across double bond CH₃CH₂MgBr + CH₃COH → CH₃CH₂CH(CH₃)OMgBr 2) Acid Hydrolysis CH₃CH₂CH(CH₃)OMgBr + H₂O → H⁺→ CH₃CH₂CH(CH₃)OH + Mg(OH)Br

Benzene - Nitration

*reagent*: conc nitric and sulphuric acid *conditions* : warm + reflux 1) HNO₃ + H₂SO₄ → NO₂⁺ + HSO₄⁻ + H₂O 2) * NO₂⁺ react via electrophilic substitution mechanism* 3) forms nitrobenzene and H⁺ + HSO₄⁻ → H₂SO₄

Organic Synthesis Techniques - Purity Test - melting temperature

- impurities decrease meting temperature of a compound as they disrupt intermolecular bonding, & ↑ range over which substance melts -place solid in small capillary tube attached to bulb of thermometer in liquid that has boiling point above solid -heat up and detect when melted

Trends in Basicity of ammonia, aliphatic and aromatic amines

- primary amines more basic than ammonia as alkyl groups are electron releasing ∴ ↑ electron density of nitrogen = ↑ ability to protonate -↑ HC chain length = ↑ electron releasing = ↑ basicity -phenylamine = lp on nitrogen donated to delocalised 𝜋 bond = ↓ ability to protonate = ↓ basic & less soluble in water

Organic Synthesis Techniques - refluxing

-Add a condenser to top of reaction mixture = prevent volatile reactants or products from evaporating and escaping -Add antidumping granules to prevent overbooking -water in bottom, out at top to cool condenser efficiently

Ester naming

-First word comes from alkyl group joined to O (becomes alcohol during hydrolysis) -Second word comes from alkyl group connected to C (becomes carboxylic acid ) -oate

carbonyl and cynaide

-HCN in situ (KCN + OH- under reflux at RTP) -nucleophilic addition -extend HC chain -can produce racemic mixture as CN attack from above or below Mechanism 1)CN- attack nucleophilic carbon 2)O:⁻ breaks H-CN to form OH + CN⁻ =hydroxynitrile

Grignard Reagent + synthesis

-Organometalli compounds containing magnesium -RMgX - dipole as carbon is δ-ve -acts as reducing agent and nucleophile Reagent: Halogenoalkanes + Magnesium Conditions : DRY (day ether) Heat with reflux under waterbath for approx 20 mins CH₃CH₂Br + Mg → CH₃CH₂MgBr

Acyl Chloride + Alcohols

-Reagent: Alcohols -Conditions: reflux in dry/anhydrous conditions -Product: ester + HCl -Observation: Misty fumes + ester/fruity smell -Equation:CH₃COCl + CH₃OH → H₃CCOOCH₃ + HCl

Acyl Chloride + Conc Ammonia

-Reagent: Ammonia (Conc) -Conditions: Low temp + excess ammonia -Product: Amide + HCl -Observation: white smoke -Equation: 1) CH₃COCl + NH₃ → CH₃CONH₂ + HCl 2) HCl + NH₃ → NH₄Cl OVERALL CH₃COCl + 2NH₃ → CH₃CONH₂ + NH₄Cl

Acyl Chloride + water

-Reagent: Water -Conditions: RTP -Product: Carboxylic Acid + HCL -Observation: Misty fumes due to HCl -Equation: CH₃COCl + H₂O → CH₃COOH + HCl

Acyl Chloride + Amine

-Reagent: amine (RNH₂/R₂NH) -Conditions: Anhydrous RTP -Product: N-Substituted Amide -Equation: a. Primary CH₃COCl + CH₃NH₂ → CH₃CO-NHCH₃ + HCL (N-methyl amide) b. secondary CH₃COCl + (CH₃)₂NH → CH₃CON(CH₃)₂ + HCl Does not work with 3° Amide as no H to make HCl

Phenol - properties

-benzene with hydroxyl attached -crystalline solid ∴ ↑ intermolecular forces compared to benzene (H-bond) -acts as a weak acid in water as ring helps to stabilise phenoxide anion and break OH C₆H₅OH ⇌ C₆H₅O⁻ + H⁺

Ester Physical Properties

-colourless liquids -insoluble in water, soluble in organics -No H-bonds as all hydrogen bonds attached to carbons -fruity smells

Formation of a polypeptide

-condensation polymerisation - form peptide bond and eliminate water

Amine - Functional group & properties

-consists of Nitrogen with 3lp and 1bp bound to alkyl groups and hydrogen -trigonal pyramidal shape -characteristic Rotting Fish Smell - Alkaline Solutions as can accept H⁺ -more soluble in acid than water as can accept H⁺ -sparingly soluble in water due to H-bond between NH & OH, ↑ HC chain = ↓ soluble

Benzene - Freidel Craft Reactions

-halogen carrier is used with haloalkane to react with benzene ring and add alkyl/acyl compounds. -must be done in dry conditions otherwise H₂O reacts with catalyst

Hydrolysis of a peptide

-heat for long time with conc HCL -forms protonated amino acid as acid hydrolysis dipeptide + H₂O + H⁺ = 2 protonated amino acids -use chromatography to separate

Ester hydrolysis- alkaline

-produces carboxylate salt BUT goes to completion!!! C₂H₅COOCH₃ + NaOH → C₂H₅COO⁻Na⁺ + CH₃OH then add acid C₂H₅COONa + H⁺ → C₂H₅COOH + Na⁺

Benzene - reaction mechanisms

-reacts via electrophilic substitution as it is electron rich due to delocalised e⁻ in 𝜋 bond (electrophile is Y⁺) 1) as Y⁺ approaches, 2e⁻ out of 6e⁻ in ring are attracted ∴ forms intermediate compound with +ve charge and partially full ring. 2) Intermediate not stable therefore Hydrogen leaves as H+ and electron pair returned to delocalised ring

Organic Synthesis Techniques - separating funnel & solvent extraction/washing

-separate immiscible liquids - Add mixture to separating funnel and add chosen solvent -agitate -allow contents to settle -open tap and collect layers (form based on density) -washing with solvent to dissolve impurities

Organic Synthesis Techniques - Steam Distillation

-separate insoluble liquid from aqueous solution -pass steam into reaction mixture= agitation from steam endures both liquid and solution on surface of mixture -good as allows separation below boiling point = ↓ chance of organic decomposing

Organic Synthesis Techniques - Simple& Fractional Distillation

-simple= heat mixture in flask, liquid with ↓ bp boil first and pass into condenser & collect. thermometer - if temp steady then compound distilled, if rising then new compound distilled -fractional - add fractionating column filled with glass beads to improve purity of final product

Amide Functional group and properties?

-solid @ RTP (methyl amide is liquid) -↓ Chain soluble in water as 2 electronegative elements joined to central carbon = perm dipole and H-Bond with water -Carbon very electron deficient

Amides and polymerisation

-undergo condensation polymerisation 1) Di-carboxylic acid & diamine = eliminate H₂O & form amide bond in POLYAMIDE 2) can also use diacyl chloride + diamine = eliminate HCl

Polarimetry

-uses plane polarized light to measure the optical activity of light 1) monochromatic light source shines light = through a polaroid filter = polarizes light 2) plane polarized light passes through sample of solution -if optically active, plane of polarized light rotated clockwise = dextrorotatory anti clockwise = laevorotatory

Aldehyde oxidation - 3 methods

1) Acidified potassium dichromate(VI) -orange solution to green solution (Cr₂O₇ ²⁻ + 14H⁺ + 6e⁻ → 2Cr³⁺ + 7H₂O) 2) Fehlings or Benedicts solution - blue solution → red ppt Cu²⁺ → Cu₂O 3) Tollens reagent dissolve ammonia and silver nitrate solution,add aldehyde and warm = silver mirror ppt forms Colourless solution → silver ppt 2Ag(NH₃)₂ → 2Ag + 4NH₃

Grignard reactions and products

1) CO₂ = Carboxylic acid 2) Methanal = 1° Alcohol 3) Aldehyde = 2° Alcohol 4) Ketone = 3° Alcohol -extend chain and add branches

Organic Synthesis Techniques - Filtration

1) Filter paper 2) Buchner Funnel/Reduced pressure

Preparation of primary aliphatic amines - reduction

1) Reagent: Nitrile & LiAlH₄ in dry ether CH₃CN + 4[H] → CH₃CH₂NH₂

Preparation of Carboxylic acids

1) full oxidation of 1° alcohols or aldehydes -Cr₂O₇²⁻ in acid + reflux C₂H₅OH + [O] → (+H₂O) CH₃CHO + [O] → CH₃COOH 2) Hydrolysis of nitriles (C≡N breaks, C to organic and N to ammonia/um) HEAT UNDER REFLUX with dil acid or alkali a. C₂H₅CN + H⁺ + 2H₂O → C₂H₅COOH + NH₄⁺ b.C₂H₅CN + OH⁻ + H₂O → C₂H₅COO⁻ + NH₃ (add hydrogen ion) -then separate via fractional distillation

How to extend a carbon chain

1) halogenoalkane + cyanide 2) Carbonyl and Cyanide 3) Alkylation of benzene 4) Grignard Reagents

Organic Synthesis Techniques - Recrystalisation

1) impure solid is dissolved in minimum volume of hot solvent 2) Solution filtered = remove insoluble impurities 3) Solution cooled and filtered = organic solid crystallises and soluble impurities removed -filtered using buchner funnel 4) While being filtered, solid washed with ice cold solvent = remove impurities on surface of solid crystals but solid does not dissolve as solvent cold 5) leave to dry

Organic Synthesis Techniques - Drying

1) solid = either leave inn warm place or use desiccator (container with lid and drying agent in bottom) 2) organic product - use anhydrous calcium chloride or sodium sulfate = absorb water so solution cloudy → colourless

Preparation of primary aliphatic amines - Methods

1)Nucleophilic substitution of Haloalkanes 2)Reduction of Nitriles

Carbonyl & 24DNPH

2,4 Dinitrophenylhydrazine reacts with carbonyl group to form 24DNPH derivative (carbonyl loses O and attaches to 24DNPH -H₂) = red/orange ppt -zine → zone -derivative ppt have characteristic mp and therefore can be used to figure out compound

Amino Acid - Properties and Isoelectric point

2-amino acid -can act as acid (donate H⁺ via carboxylic acid end) or base (Amine group accept H⁺) -isoelectic point - pH at which you can find zwitterions of amino acid -if ↑ pI, solution has ↑ pH as molecule primarily base, other way for low pI

Benzene Keluke structure & problems

3 C=C, 3 C-C 1) did not decorous bromine water 2)only 3 dibromobenzene isomers 3) bond lengths and electron density symmetrical 4) enthalpy of hydrogenation more thermodynamically stable than it should be

Racemic mixture

50/50 mixture of 2 enantiomers = mixture is not optical active overall

How to aldehydes and ketones react?

Aldehyde - reduced to 1° alcohol, oxidized to carboxylic acid Ketone - reduced to 2° alcohol, CANNOT BE OXIDISED

Amine & Halo-alkane

Amine substitution Conditions : Heat under reflux 1) C₂H₅NH₂ + C₂H₅Br → (C₂H₅)₂NH + HBr 2) (C₂H₅)₂NH + C₂H₅Br → (C₂H₅)₃N + HBr Furthur Sub (C₂H₅)₃N + C₂H₅Br → (C₂H₅)₄N⁺Br⁻

Amines and copper ions

Amines can acts as ligands as they have lp (like ammonia) a. [Cu(H₂O)₆]²⁺ + 2 C₄H₉NH₂ → [Cu(H₂O)₄(OH)₂] + 2 C₄H₉NH₃⁺ = light blue ppt b [Cu(H₂O)₄(OH)₂] + 4 C₄H₉NH₂ → [Cu(C₄H₉NH₂)₄(OH)₂] ²⁺ + 2H₂O + 2OH⁻

Amines and water

Amines react with water to form basic solutions -dissolve in water as can form H-bonds -can accept H⁺ by dative bond with nitrogen CH₃NH₂ + H₂O ⇌ CH₃NH₃⁺ + OH⁻

Carbonyl group - bonding

C=O - polar so molecules may have perm dipole-dipole forces BUT NO H BONDS

Acyl Chloride

Carbon is attached to 2 very electronegative atoms ∴ electron deficient and open to nucleophilic attack

Carboxylic acid reaction - esterification

Carboxylic acid + alcohol (w/acid catalyst of conc. sulphuric acid) ⇋ ester + water

Stereoisomerism

Compounds with the same molecular and structural formula but a different arrangement of atoms in space

Benzene - Properties

C₆H₆ -colourless arene liquid -bp 80C -insoluble in water -toxic

What does the difference in hydrogenation enthalpy of benzene tell us about its structure?

Difference in stability of about -152 kj mol, There is not 3 xC=C bonds but rather each carbon atom donates 1electron to the delocalised pi bond. This delocalised bond increases the stability of the ring structure = substitution rather than addition

Benzene - Acylation

Friedel Craft *reagent* - ethanoyl chloride *conditions* - heat under reflux in anhydrous 1) AlCl₃ + CH₃COCl → AlCl₄⁻ + CH₃CO ⁺ 2)CH₃CO ⁺ electrophile 3) makes HCl

Benzene - Alkylation

Friedel craft *reagent* - haloalkane + AlCl₃ Catalyst *conditions* - dry and anhydrous, RTP 1) AlCl₃ + RX → AlCl₃X ⁻ + R⁺ 2) R ⁺ attacks as electrophile 3) Forms HCl + alkyl benzene

HPLC

High Pressure Liquid Chromatography Stationary:silica packed in tube (smaller particle = ↑ separation) mobile - high pressure liquid solvent 1) Sample injected into tube 2) Solvent forced under ↑ pressure 3) DIFFERENT RETENTION TIME = detect via UV :) fast, automated, can be connected to mass spec

Ester - hydrolysis

Hydrolyse with water/split with water ⇌ Carboxylic acid and alcohol -reversible - slow

Benzene - Hydrogenation

Mix with hydrogen and heat under pressure with a nickel catalyst C₆H₆ + 3H₂ → C₆H₁₂

Benzene - current model

Orbitals hybridise to SP₂ ∴ each carbon atom gives 1 electron to delocalised 𝜋 ring above and below carbons solves problems !

Why is phenol more reactive than benzene?

Phenol has a hydroxyl group attached to the benzene ring. The oxygen in the hydroxyl grop has a line pair of electrons which it donates to the delocalised pi bond, thus increasing the electron density of the pi bond and increasing reactivity

Preparation of an amide

Reagent : Acyl Chloride + Ammonia Conditions : Reaction very vigorous @ RTP Equation : CH₃COCl + NH₃ → CH₃CONH₂ + HCl

Amine + acyl Chloride

Reagent : Ethanoyl chloride +butylamine Conditions : RTP Type of reaction : addition-elimination as 2 molecules joined, 1 small molecule eliminated CH₃COCl + C₄H₉NH₂ → CH₃CONHC₄H₉ + HCl N-butyl ethanamide = buty group attached to N, 2 carbons from acyl chloride and its an amide

Preparation of primary aliphatic amines - Nucleophilic Sub & how to prevent further substitution

Reagent : Haloalkane and AQUEOUS ALCOHOLIC Ammonia Conditions: a. heat under reflux with conc ammonia in a sealed tube under pressure CH₃Cl + NH₃ → CH₃NH₂ + HCl (or salt) -can further sub as amine has lone pair on nitrogen ∴ use excess ammonia CH₃Cl + 2NH₃ → CH₃NH₂ + NH₄Cl

Preparation of aromatic amines

Reagent : nitrobenzene & Acidified Tin(Sn + HCl) Conditions : heat under reflux C₆H₅NO₂ + 6[H] → C₆H₅NH₂ + 2H₂O -or add alkali to phenyl-ammonium ion C₆H₅NH₃⁺ + OH⁻→C₆H₅NH₂ + H₂O

carbonyl reduction

Reduced using LiAlH₄ (lithium aluminum hydride) dissolved in dry ether e.g. C₂H₅CHO + 2[H] → C₃H₇OH

Rf

Retention factor = distance moved by solute/solvent -same for every time per solute if using same conditions -may need to measure using uv or dye for organic as colourless Limitations : components similar Rf & no Rf value may be recorded before

Gas Liquid Chromatography

Stationary : liquid or metal inside tube Mobile: inert gas (Ne/He) 1) inject small sample & boil to vaporise 2) force inert gas under pressure through sample 3) components have different retention times and thus detected by UV at different times -rate depends on attraction to stationary phase

Column chromatography

Stationary : silica packed into burette mobile : solvent 1) Soak stationary phase in solvent 2) add mixture to top of tube and open tap 3) components travel through column at different times depending on attraction to solvent and stationary phase 4) top up solvent 5) collect component at end and further analyse

TLC

Stationary phase : silica mounted on plastic mobile : solvent

Optical isomerism

Type of stereoisomerism - caused by chiral carbon centre in a molecule -Optical isomers are mirror non-superimposable images of one another

Benzene - Bromination

Use FeCl₃/Br₃ as catalyst heat under reflux

Chromatography - stationary & mobile phase

Used to separate and analyse small amounts of mixtures -stationary : phase that does not move -mobile : component that moves through stationary phase and transport substances

Zwitterion

a molecule containing both a positive and negative charge, leading to no overall net charge -↑ intermolecular forces ∴ ↑ MP/BP

Chiral

an atom in a molecule that allows it to exist in non-superimposable forms e.g. chiral Carbon centre with 4 different functional groups

Amino-acid and chirality

apart from glycine, all amino acids contain a a chiral carbon centre, ∴ all have optical isomerism. If its synthesised in a lab, a racemic mixture formed

Benzene - Combustion

burns with a yellow sooty flame due to ↑ C:H

SN1 & optical activity via nucleophilic substitution

carbocation is planar = equal chance nucleophile will attack from left or right = racemic mixture formed

Chromatography - how?

each component of mixture attracted to both mobile and stationary phone but different in strength 1) strong to stationary = ↓ movement 2) Strong to mobile = ↑ movement

Addition polymerisation dicarboxylic acid and diol

ester bond -OH lost from acid H lost from alcohol forms water

Name ester

first part from alcohol second part from carboxylate salt e.g. methanoic acid + ethanol → ethyl methanoate + water

Carboxylic acid reaction - Halogenation

form acyl chloride PCl₅ + Carboxylic acid → POCl₃ + HCl + acid chloride -anhydrous as PCl₅ react with water -HCl= misty fumes =test for OH

Amines + acid

form ammonium quarternary ionic salts CH₃NH₂ + HCl → CH₃NH₃⁺Cl⁻

Condensation polymerisation

formation of a polymer by the reaction of 2 monomers in which a small molecule is also lost - usually water or HCL -e.g. ester link

Phenol & bromine + explanations

forms 2,4,6 tribromophenol at RTP -oxygen in OH has a lp that can merge with delocalised 𝜋 bond = ↑ electron density above and below ring = ↑ reactive as Br₂ polarised when approaches ring → Br⁺ + Br⁻ -OH = ring activating

Ester synthesis

from Carboxylic Acid - slower, reversible and ↓ yield from Acyl chloride - faster, better yield but must be dry

Ester hydrolysis- acidic

hydrolyse with water and add sulphuric acid catalyst to speed up -doesnt affect position of equilibrium

Carbonyl - Iodoform - how, what does it show?

if CH₃CO present, reacts with Iodine alkaline solution to form CHI₃ = yellow ppt CH₃C=OR' + 3I2 + 4OH- → CHI₃ + R'COO- + 3I- + 3H2O

Organic Synthesis Techniques - Purity = bp

impurities ↑ bp -simple distillation and compare to data book value -may not be conclusive as cannot measure v-accuratly + some organic compounds have same bp

Solubility of carbonyl groups

low chain aldehyde/ketone can form H bonds with water ∴ dissolve -long chain ↓ soluble

Carboxylic acid reaction - carboxylate salt

neutralisation reaction with base 2CH₃COOH + Na₂CO₃ → 2 CH₃COO⁻Na⁺ + CO₂ + H₂O

Addition Polymerisation

no loss of atoms ∴ all atoms of monomer in polymer

Optical isomers

non superimposable images of molecules - mirror images as they are asymmetric.

Aldehyde

on terminal carbon

Enantiomers

optically active isomers -only distinguished by experimentation

Carboxylic acids - bonding and solubility/boiling point

polar C=O & O-H bonds -can form H bonds with water therefore small chain dissolve. long chain less soluble as HC chain is bigger -relatively high bp as H bonds + dimers ACTS AS WEAK ACID

Carboxylic acid reaction - reduction

reduced to aldehyde = immediately further to 1° alcohol LiAlH₄ in dry ether CH₃COOH + 4[H] → C₂H₅OH + H₂O

Paper Chromatography

stationary : paper mobile : solvent 1) plase sample on paper on base line (in pencil) 2) dip paper into solvent (depth < base line) 3) place in container with lid to prevent solvent evaporation 4) lat solvent run up paper = dry and analyse (may need to use dye e.g. ninhydrin as organic colourless)

Sn2 & optical activity

when partial bonds form - product fomred is enantiomer e.g. if reactant is dextro-, product is leave ∴ can see which mechanism


Conjuntos de estudio relacionados

Chapter 3 - General Partnerships

View Set

Managerial Economics Exam 1 Review

View Set

BUS_128 Team Communication in the workplace

View Set

Chapter 50: Care of the Patient with an Endocrine Disorder

View Set

SS Chapter 2: Section 1 - The Age of Exploration

View Set