AP Chem Lesson Quiz Answers
Based on their Lewis diagrams, which of the following pairs of liquids are most soluble in each other?
A
The diagram above shows the distribution of speeds for a sample of N2(g) at 25°C. Which of the following graphs shows the distribution of speeds for a sample of O2(g) at 25°C (dashed line) ?
A
A student was studying physical and chemical changes. The student carried out some procedures in the laboratory and recorded observations. For one of the procedures, the student concluded that a physical change took place, but not a chemical change. Which of the following could have been the results of the procedure?
A cube of metal was changed into a flat sheet of metal.
The mass spectrum of the element Sb is most likely represented by which of the following?
B
The reaction between solid copper and aqueous silver nitrate produces solid silver and a blue solution, as represented by the balanced equation shown above. Based on the balanced equation, which of the following identifies the oxidation and reduction half-reactions?
B
Which of the following numerical expressions gives the number of particles in 2.0g of Ne?
C
The particle diagram above represents an aqueous solution of a weak monoprotic acid. The white circles represent H atoms. Which of the following shows the species that act as a Brønsted-Lowry base and its conjugate acid, in that order, in the solution?
D
The ionic compounds NaCl and MgS are represented by the diagrams above. Which statement correctly identifies diagram 1 and identifies the compound with the lower melting point, explaining why?
Diagram 1 represents NaCl; it has a lower melting point than MgS because the coulombic attractions between its singly charged Na+ ions and the Cl− ions are weaker than those between the ions in MgS. C
The survival of aquatic organisms depends on the small amount of O2 that dissolves in H2O. The diagrams above represent possible models to explain this phenomenon. Which diagram provides the better particle representation for the solubility of O2 in H2O, and why?
Diagram 2, because the polar H2O molecules can induce temporary dipoles on the electron clouds of O2 molecules.
Which of the following is the net ionic equation for the reaction between aqueous sodium fluoride and hydrochloric acid?
F- (aq) + H+ (aq) -> HF (aq)
Which of the following elements has the mass spectrum represented above?
Mo
An experiment was conducted to determine the rate law for the reaction A2(g)+B(g)→A2B(g). The table above shows the data collected. Based on the data in the table, which statement is correct?
Since the rate law can be expressed as rate=k[A2][B], doubling the concentrations of A2 and B will quadruple the rate of the reaction
The reaction between aqueous strontium chloride (SrCl2) and aqueous potassium sulfate (K2SO4) forms a precipitate of strontium sulfate (SrSO4). Which of the following represents the net ionic equation for the reaction?
Sr 2+ (aq) + SO4 2- (aq) -> SrSO4 (s)
A 2mol sample of F2(g) reacts with excess NaOH(aq) according to the equation above. If the reaction is repeated with excess NaOH(aq) but with 1 mol of F2(g), which of the following is correct?
The amount of OF2(g) produced is halved.
The reaction is carried out at constant temperature inside a rigid container. Based on this mechanism, which of the following is the most likely reason for the different rates of step 1 and step 2 ?
The amount of energy required for a successful collision between H2 and ICl is greater than the amount of energy required for a successful collision between HI and ICl.
The elements C and Se have the same electronegativity value, 2.55. Which of the following claims about the compound that forms from C and Se is most likely to be true?
The carbon-to-selenium bond is nonpolar covalent.
Infrared spectroscopy is a useful tool for scientists who want to investigate the structure of certain molecules. Which of the following best explains what can occur as the result of a molecule absorbing a photon of infrared radiation?
The energies of infrared photons are in the same range as the energies associated with different vibrational states of chemical bonds. Molecules can absorb infrared photons of characteristic wavelengths, thus revealing the types and strengths of different bonds in the molecules.
A 5.0g sample of MgCl2 may contain measurable amounts of other compounds as impurities. Which of the following quantities is (are) needed to determine that the sample is pure
The mass of Mg and the mass of Cl in the sample
When the chemical reaction 2NO(g)+O2(g)→2NO2(g) is carried out under certain conditions, the rate of disappearance of NO(g) is 5.0×10−5 Ms s−1. What is the rate of disappearance of O2(g) under the same conditions?
ecause two molecules of NO are consumed per molecule of O2, the rate of disappearance of O2(g) is 2.5×10−5 Mss−1.
The graph above shows the distribution of molecular speeds for four different gases at the same temperature. What property of the different gases can be correctly ranked using information from the graph, and why?
he molecular masses of the gases, because the gas molecules have the same average kinetic energy and mass can be calculated using the equation KEavg=1/2mv2.
Which of the following represents an electron configuration that corresponds to the valence electrons of an element for which there is an especially large jump between the second and third ionization energies? (Note: n represents a principal quantum number equal to or greater than 2.)
ns^2
A 100mL sample of 0.1 M MgCl2(aq) and a 100mL sample of 0.2M NaOH(aq) were combined, and Mg(OH)2(s) precipitated, as shown by the equation above. If the experiment is repeated using solutions of the same molarity, which of the following changes in volume will double the amount of Mg(OH)2(s) produced?
sing twice the volume of MgCl2(��) and twice the volume of NaOH (aq)
Which of the following is the ground-state electron configuration of the F− ion?
1s^2 2s^2 2p^6
Which of the following ground-state electron configurations represents the atom that has the lowest first-ionization energy?
1s^2 2s^2 2p^6 3s^1
Which of the following best represents the ground-state electron configuration for an atom of selenium?
1s^2 2s^2 2p^6 4s^2 3d^10 4p^4
Zn2+(aq)+2e−→Zn(s) The half-reactions for the oxidation-reduction reaction between Al(s) and Zn2+(aq) are represented above. Based on the half-reactions, what is the coefficient for Al(s) if the equation for the oxidation-reduction reaction is balanced with the smallest whole-number coefficients?
2
Which of the following is the balanced net ionic equation for an oxidation-reduction reaction between Ag+(aq) and Ni(s) based on the half-reactions represented above?
2 Ag+ (aq) + Ni (s) -> 2Ag(s) + Ni 2+ (aq)
Based on the proposed mechanism, what is the balanced chemical equation for the overall reaction
2 O4 (g) -> 3 O2 (g)
NO(g) and O2(g) react to form NO2(g). The rate law of the reaction is rate=k[NO]2[O2]. If the reaction occurs in a single elementary step that is a three-body molecular collision, then which of the following is the equation for the elementary step?
2NO + O2 -> 2NO2
A sample of carbonate rock is a mixture of CaCO3 and MgCO3. The rock is analyzed in a laboratory, and the results are recorded in the table above. Which columns in the table provide all the information necessary to determine the mole ratio of Ca to Mg in the rock?
3, 4, 6, 7
A wavelength of 510nm corresponds to an approximate frequency of 6×1014s−1. What is the approximate energy of one photon of this ligh
4 x 10 ^ -19 J
The diagram above represents the photoelectric effect for a metal. When the metal surface is exposed to light with increasing frequency and energy of photons, electrons first begin to be ejected from the metal when the energy of the photons is 3.3×10−19J.
5.0 x 10^14 s-1
A student mixes 20.0g of white KCl crystals with distilled water in a beaker. After the mixture was stirred, no crystals are visible and the solution is clear. After several days, all of the water evaporates and white crystals are found in the beaker. Which of following pieces of experimental evidence would best help the student to confirm that a new compound had not been made and that only a physical change occurred?
After the water has evaporated, the white crystals in the beaker have a mass of 20.0g.
The structure of one form of boron nitride is represented above. This form of boron nitride is one of the hardest substances known. Which of the following best helps explain why boron nitride is so hard?
Boron nitride is a network solid of atoms connected by covalent bonds with fixed bond angles.
Based on the models, which of the following represents a species that acts as a catalyst for the reaction?
C
The initial rate of formation of CO2(g) from the chemical reaction represented by the equation above was studied in two separate experiments. The table above provides the experimental conditions used. If both experiments are carried out with finely powdered samples of the solid and 50.0mL of HCl(aq), which experiment, if any, will have the faster initial rate of formation of CO2(g) and why?
CO2(g) will be formed at a faster rate in experiment 2 because more H+ particles can react per unit time
Which graph best represents the changes in concentration of O2(g), and why
Graph 1, because the rate of O2 consumption is half the rate at which NO is consumed; two molecules of NO react for each molecule of O2 that reacts.
HCl(aq)+H2O(l)→H3O+(aq)+Cl−(aq) For the dissolution of HCl in water represented above, which of the following pairs includes the Brønsted-Lowry bases?
H2O(l) and Cl - (aq)
A student places a piece of I2(s) in 50.0 mL of H2O(l), another piece of I2(s) of the same mass in 50.0 mL of C6H14(l), and shakes the mixtures. The results are shown above. What do the results indicate about the intermolecular interactions of the substances?
I2 and C6H14 have similar intermolecular interactions, and I2 and H2O do not.
Two pure elements react to form a compound. One element is an alkali metal, X, and the other element is a halogen, Z. Which of the following is the most valid scientific claim that can be made about the compound?
It contain ionic bonds.
The diagram above is a molecular model of a gaseous diatomic element that is just above its boiling point. Intermolecular forces between the gas molecules will cause them to condense into the liquid phase if the temperature is lowered. Which of the following best describes how the model is limited in its depiction of the phenomenon?
It does not show how the temporary fluctuating dipoles of the molecular electron clouds result in a net force of attraction between the molecules.
A student has a 1g sample of each of the following compounds: NaCl, KBr, and KCl. Which of the following lists the samples in order of increasing number of moles in the sample?
KBr < KCL < NaCl
The electron cloud of HF is smaller than that of F2 , however, HF has a much higher boiling point than F2 has. Which of the following explains how the dispersion-force model of intermolecular attraction does not account for the unusually high boiling point of HF?
Liquid F2 has weak dispersion force attractions between its molecules, whereas liquid HF has both weak dispersion force attractions and hydrogen bonding interactions between its molecules
The table above summarizes data given to a student to evaluate the type of change that took place when substance X was mixed with water. The student claimed that the data did not provide enough evidence to determine whether a chemical or physical change took place and that additional tests were needed. Which of the following identifies the best way to gather evidence to support the type of change that occurred when water and X were mixed?
Measuring the electrical conductivities of X and the mixture of water and
The mass spectrum of a sample of a pure element is shown above. Based on the data, the peak at 26amu represents an isotope of which of the following elements?
Mg with 14 neutrons
Which statement correctly compares what occurs when molecules absorb photons in the microwave region with what occurs when molecules absorb photons in the infrared region?
Microwave photons cause the molecules to increase their rotational energy states, whereas infrared photons cause the molecules to increase their vibrational energy states.
A student obtains a sample of a pure solid compound. In addition to Avogadro's number, which of the following must the student know in order to determine how many molecules are in the sample?
Molar mass of the compound, mass of the sample.
Which statement best helps to explain the observation that NH3(l) boils at −28°C, whereas PH3(l) boils at −126°C?
NH3 has hydrogen bonding that is stronger than the dipole-dipole forces in PH3.
When 0.20 M NH4Cl(aq) and 0.20 M NaOH(aq) are mixed, the reaction represented by the equation above occurs and a strong smell of ammonia, NH3, is observed. Based on this information, which of the following statements is true?
NH4+(aq) is a stronger acid than H2O(l) is.
The proposed rate-determining step for a reaction is 2 NO2(g)→NO3(g)+NO(g). The graph above shows the distribution of energies for NO2(g) molecules at two temperatures. Based on the graph, which of the following statements best explains why the rates of disappearance of NO2(g) are different at temperature 2 and temperature 1 ?
NO2(g) is consumed at a faster rate at temperature 2 because more molecules possess energies at or above the minimum energy required for a collision to lead to a reaction compared to temperature 1.
The diagram above represents the photoelectric effect for a metal. When the metal surface is exposed to light with increasing frequency and energy of photons, electrons first begin to be ejected from the metal when the energy of the photons is 3.3×10−19J.
Orange
Which of the following is the net ionic equation for the reaction between aqueous sodium fluoride and hydrochloric acid?
Pb 2+ (aq) + 2 Br -(aq) -> PbBr2 (s)
The initial rates of the reaction represented by the equation shown above were measured for different initial concentrations of NO(g) and Cl2(g). Based on the data given in the table above, which of the following is the rate law expression for the reaction, and why?
Rate=k[NO]2[Cl2], because the initial rate quadrupled when [NO] was doubled and doubled when [Cl2] was doubled.
A 1L sample of helium gas at 25°C and 1atm is combined with a 1L sample of neon gas at 25°C and 1atm. The temperature is kept constant. Which of the following statements about combining the gases is correct?
The average kinetic energy of the helium atoms and neon atoms do not change when the gases are combined.
Which of the following scientific claims about the bond in the molecular compound HF is most likely to be true?
The bond is highly polar.
A two-step reaction mechanism is proposed for a gas-phase reaction, as represented above. Which of the following correctly identifies both the chemical equation for step 1 and the rate law for the overall reaction?
The chemical equation for step 1 is 2NO2(g)→NO(g)+NO3(g), and the rate law is rate=[NO2]2.
Based on the proposed mechanism, which of the following best describes the concentration of the species represented above as the reaction occurs?
The concentration is very low for the duration of the reaction.
The reaction between C6H12O6 and O2 is represented by the balanced equation above. In an experiment, 0.30mol of CO2 was produced from the reaction of 0.05mol of C6H12O6 with excess O2. The reaction was repeated at the same temperature and in the same container, but this time 0.60mol of CO2 was produced. Which of the following must be true?
The initial amount of C6H12O6 in the container must have been 0.10mol.
The gas-phase reaction A2(g)+B2(g)→2 AB(g) is assumed to occur in a single step. Two experiments were done at the same temperature inside rigid containers. The initial partial pressures of A2 and B2 used in experiment 1 were twice the initial pressures used in experiment 2. Which statement provides the best comparison of the initial rate of formation of AB in experiments 1 and 2 ?
The initial rate of formation of AB is faster in experiment 1 than in experiment 2 because at a higher pressure the collisions between A2 and B2 molecules would have been more frequent, increasing the probability of a successful collision.
A student is given two 10g samples, each a mixture of only NaCl(s) and KCl(s) but in different proportions. Which of the following pieces of information could be used to determine which mixture has the higher proportion of KCl(s) ?
The mass of Cl in each mixture
A student places a sample of a pure metal in a crucible and heats it strongly in air. Data from the experiment are given in the table above. The final mass was determined after the sample was cooled to room temperature. Which of the following statements related to the experiment is correct
The mass of the sample increased, so a chemical change occurred when bonds formed between the metal and another substance.
Which of the following represents the overall chemical equation for the reaction and the rate law for elementary step 2 ?
The overall reaction is H2(g)+2ICl(g)→2HCl(g)+I2(g); the rate law for step 2 is ratr=k[HI][ICl].
In aqueous solution, the reaction represented by the balanced equation shown above has the experimentally determined rate law: rate=k[S2O82−][I−]. If the concentration of [S2O82−] is doubled while keeping [I−] constant, which of the following experimental results is predicted based on the rate law, and why?
The rate of reaction will double, because the rate is directly proportional to [S2O8 2-]
A student was asked to formulate a hypothesis about what would happen if 100.mL of 0.1M NaOH(aq) at 25°C was combined with 100.mL of 0.1M MgCl2(aq) at 25°C. Which of the following hypotheses indicates that the student thought a chemical change would occur?
The resulting solution would contain a precipitate.
Four different liquid compounds in flasks at 20°C are represented above. The table below identifies the compounds. Flask C shows the most particles in the vapor phase. Which of the following is not shown in the model but best helps to explain why flask C must contain pentane
The strength of the intermolecular forces between the particles in the liquids.
A student had two dilute, colorless solutions, HCl(aq) and NaOH(aq), which were at the same temperature. The student combined the solutions, and the reaction represented above occurred. Which of the following results would be evidence that a chemical reaction took place?
The temperature of the reaction mixture increases.
Beta-carotene is an organic compound with an orange color. The diagram above shows the ultraviolet spectrum of beta-carotene. Which of the following statements is true about the absorption bands in the spectrum?
The two main absorption bands are associated with transitions in electronic energy levels. The band in the region corresponding to shorter wavelengths shows a lower absorbance than the band in the region corresponding to longer wavelengths. D
Which of the following best helps to explain why the electron affinity of Br has a greater magnitude than that of I?
There is a greater attraction between an added electron and the nucleus in Br than in I.
Two different ionic compounds each contain only copper and chlorine. Both compounds are powders, one white and one brown. An elemental analysis is performed on each powder. Which of the following questions about the compounds is most likely to be answered by the results of the analysis?
What is the formula unit of each compound?
Which of the following best helps explain why the electronegativity of Cl is less than that of F?
When Cl and F form bonds with other atoms, the Cl bonding electrons are more shielded from the positive Cl nucleus than the F bonding electrons are shielded from the positive F nucleus.
A student has samples of two pure compounds, XClO3 and ZClO3, which contain unknown alkali metals X and Z. The student measures the mass of each sample and then strongly heats the samples to drive off all the oxygen, leaving solid residues of XCl and ZCl. The student measures the mass of the solid residue from each sample. Which of the following questions can be answered from the results of the experiment?
Which has the greater molar mass, X or Z?
A student has two samples of NaCl, each one from a different source. Assume that the only potential contaminant in each sample is KCl. The student runs an experiment to determine the percent by mass of chlorine in each sample. From the results of this experiment alone, which of the following questions is most likely to be answered?
Which sample has the higher purity?