Article 200 - Use and Identification of Grounded Conductors (QUARTER 1)

At the time of installation, grounded conductors __________ AWG or larger can be identified by distinctive white or gray markings at their terminations.

4

____________ conductors shall not be used for more than one branch circuit, one multiwire branch circuit, or more than one set of ungrounded feeder conductors except as allowed elsewhere in the Code.

Neutral

The screw shell of a luminaire or lampholder shall be connected to the ___________.

grounded conductor

The identification of terminals to which a neutral conductor is to be connected shall be substantially white or ___________ in color.

silver

The white conductor within a cable can be used for a(an) __________ conductor where permanently reidentified to indicate its use as an ungrounded conductor at each location where the conductor is visible and accessible.

ungrounded

The insulated grounded conductor(s) in a multiconductor cable _____________ AWG or larger, shall be permitted to be re-identified at the time of installation at its terminations.

4

Where grounded conductors of different systems are installed in the same raceway, cable, or enclosure, each neutral conductor shall be identified to distinguish the systems by _____________.

a continuous white or gray outer finish for one system, a neutral conductor with a different continuous white or gray outer finish or white or gray with a stripe for one system, or other identification allowed by 200.6(A) or (B) that distinguishes each system from other systems (any of these)

The continuity of a grounded conductor shall not depend on a connection to _________________.

a metallic enclosure, a race way, or cable armor (any of these)

Article 200 provides the requirments for _____________.

identification of terminals, grounded conductors in premises wiring systems, and identification of grounded conductors (all of these)

In devices or utilization equipment with polarized connections, identification of terminals to which a neutral conductor is to be connected shall be substantially __________ or silver in color.

white

Receptacles shall have the terminal intended for connection to the grounded conductor identified by a metal or metal coating that is substantially white or silver in color or by the word "____________."

white