Audio 3190 - Patchbay Basics
How many aux master sends are there on the NEVE console?
8
Inputs to available outboard gear racked in REM are labeled as ___ ________ _____ on the patchbay
Aux Equipment Inputs
Outputs of available outboard gear racked are labeled as ____ ____ ____.
Aux Equipment Out
If EFX devices were hardwired and dedicated to particular aux send outputs on the NEVE in REM, where would they show up on the patchbay? ___ _____
Aux Lines
Outputs from the aux master sends are used to connect to EFX inputs are labeled as ___ _/_
Aux O/P
Found in the NEVE dynamic section, the keying circuit of the gate is accessed via the _____ ______ on the patchbay
Gate Input
When a signal is bussed, the output of the assign matrix is routed to the patchpoint known as the _____ ______
Group Output
Inputs for outputs of a device patched into a channel are known as _____ _____.
Insert Returns
Outputs at -2dB of the channel path after the microphone preamplifier and dynamics are known as _____ ______
Insert Sends
In mix status, inputs to the console channel path, or the large faders are called ____ ______
Line Inputs
Located in the studio and the iso booths, _______ ______ are connected to whatever microphone "preamplifier" inputs are patched to
Microphone Inputs
A wall-mounted female XLR mic connector from the studio panels are labeled as a _______ _____ on the patchbay
Microphone Line
Inputs (1-4) used the return EFX outputs across the mix buss pre master fader are called ____ ____ _/_
Mix Ins I/P
Outputs (1-4) used to patch EFX inputs across the mix buss are labeled as ____ ____ _/_
Mix Ins O/P
Outputs (1-4) used to patch a device to record a mix other than those normalled to the console are labeled as ___ _/_
Mix O/P
Inputs Patch points to the console monitor path corresponding to the small faders are called _______ ______
Monitor Inputs
In mix status, outputs of the multitrack recorder connected are called
Multitrack Returns
In mix status, outputs of the multitrack recorder connected are called ______ ______ and are used to monitor the signal in MIC status.
Multitrack Returns
Whether a signal is assigned direct (DIR) or bussed via the multitrack matrix, a channel strip's group output feeds the ______ _____ which corresponds directly to the multitrack recorder input in use
Multitrack Send
Multiple jacks connected to each other that allow the same signal to be fed to other sources simultaneously
Mults
Patchpoints found in the central patchbay and all REM studio patchbays (A, B, C, Midi Suite & the Post Suite) that provide access to available inputs or outputs of devices in different rooms, microphone lines, reverb plates, tape machines, outboard gear, etc. are called
Tie Lines
The patchpoints Mix M/C 1-4 are not used on the NEVE console in REM studio A.
True, the patchpoints Mix M/C 1-4 are not used on the NEVE console in REM studio A.
Reverb returns (1-4) are used to:
hardwire EFX outputs to the console
Console Rev Inputs 1-4 L&R are used to:
patch aux equipment outputs from EFX devices to the dedicated reverb return controls
