Automotive Final part 4

¡Supera tus tareas y exámenes ahora con Quizwiz!

What statement is true about ABS systems?

ABSs systems require speed sensors on the ABS-equipped axles

Technician A and technician B are discussing spark plug gap. Technician A says that the spark may be weak in strength if the gap is too wide. Technician B says that the spark will have high-voltage if the gap is too narrow. Who is correct?

a only

Two technicians are discussing electrical circuit defects. Technician A says that an open is a circuit which has been turned off. Technician B says that a short-to-power is an unintentional connection between two or more conductors. Who is correct?

b only

Two technicians are discussing first aid treatments. Technician A says that treating for shock should be the last consideration in treating an injured person. Technician B says that going into shock can cause death quicker than the injury. Who is correct?

b only

Two technicians are discussing head gaskets. Technician A says head gaskets are typically made from paper. Technician B says head gaskets are under the most force of any gasket. Who is correct?

b only

Two technicians are discussing runout. Technician A says that runout won't affect vehicle operation. Technician B says that runout can cause severe vibration. Who is correct?

b only

Two technicians are discussing snaprings. Technician A says that snaprings are made from high-quality aluminum. Technician B says that snaprings may be internal or external. Who is correct?

b only

Which type of fire extinguisher is required for an oil or gasoline fire?

b red

Two technicians are discussing engine design. Technician A says that in-line engines have the cylinders in a straight line. Technician B says that V-block motors have cylinders divided into two rows set at an angle to each other. Who is correct?

both a and b

Two technicians are discussing engine operation. Technician A says that valve timing is critical to smooth engine operation. Technician B says that ignition timing is critical to smooth engine operation. Who is correct?

both a and b

A thread pitch gauge is designed to measure the grade of a bolt

false

An EMT is designed to run long term even with a puncture

false

Hybrid power vehicles run solely on electricity.

false

Sway bars are designed to increase vehicle lean during turns

false

The length of the bolt is measured from the top of the head to the bottom of the thread.

false

The parts manager is typically in charge of all operations, including supervising the service manger

false

Thermodynamics is the study of heat and cooling of air conditioning systems

false

franchises are independently owned, but managed by the franchiser.

false

Two technicians are discussing business ethics. Technician A says that all areas of the automotive industry are held in high esteem. Technician B says that most people trust service departments. Who is correct?

neither a or b

Two technicians are discussing leaf springs. Technician A says that leaf springs offer a more comfortable ride than standard coil springs. Technician B says that monoleaf springs are typically found on standard passenger cars. Who is correct?

neither a or b

Two technicians are discussing magnetism. Technician A says that all magnetism is naturally occurring. Technician B says that all magnetism is created. Who is correct?

neither a or b

The transmission control module (TCM) controls _____.

shift solenoids

Two technicians are discussing alternative fuels. Technician A says that biodiesel is produced from vegetable oil that is used as cooking oil. Technician B says that biodiesel is produced from refined natural gas. Who is correct?

tech a

Which statement about technician responsibility and pay is correct?

technicians can be paid hourly rates

Repair orders are generally assigned to which technician?

the first available technician experienced in that repair

What is true of service departments?

the service manager reports to the general manager

What statement is true concerning engine vacuum?

the vacuum gauge must be connected to a fitting in the intake manifold

Which statement is true of to

torsion bars are manufactured to twist and return to their original condition

A circuit provides a path for current to flow.

true

A vacuum is any pressure less than atmospheric pressure

true

Box-end wrenches have less chance of slipping off than an open-end wrench

true

Coil springs are commonly used on the front of passenger cars and light trucks.

true

Constant variable ratio (CVR) transmissions have no internal gears.

true

Employees are responsible for ensuring the company makes a profit on its investment.

true

Pressurized oil is required to maintain a space between the rod bearing and the crankshaft

true

Some drum brakes have a form of self-adjuster to move the brake shoes outward as they wear.

true

Some mistakes that are made by technicians can be life-threatening.

true

Speed sensors use a toothed ring to trigger the sensor

true

The powertrain control module (PCM) is the largest single computer in a vehicle

true

What statement is true of MSDSs?

MSDSs provide for the employee's protection.

Two technicians are discussing shop operations. Technician A says that the accountant for the dealership may also be the cashier. Technician B says that service writers must understand enough about vehicle operations to understand the customer's concern. Who is correct?

both a and b

Two technicians are discussing snaprings. Technician A says special pliers should be used when removing and installing snaprings. Technician B says snaprings can be internal or external. Who is correct?

both a and b

Two technicians are discussing vehicle warranties. Technician A says that most vehicle manufacturer warranties have at least some portion of coverage that is bumper-to-bumper. Technician B says that most repair shops warrant their repairs and parts for a certain time or mileage. Who is correct?

both a and b

Which type of wrench goes entirely around a nut or bold head?

box end

What type of springs are typically used on the front of passenger cars and light trucks

coil spring

Which step is performed by the accountant and not the technician?

collecting the money

Shock absorbers _____.

control spring movement and oscillation

Runout is measured with a(n) _____.

dial indicator

Which atomic particle is found outside of the nucleus of the atom?

electron

Container labels must contain _____.

exactly the same items found on the MSDS


Conjuntos de estudio relacionados

Ch 15 - Growth Motivation & Positive Motivation

View Set

DNR biosintezės bendrieji bruožai

View Set

Intro to Financial Accounting Chapter 1 (Introduction to Financial Statements)

View Set

Chapter 23 Care of Patients with Brain Disorders

View Set

Packard AP Chemistry Final Exam Semester 2

View Set