Business Policy

¡Supera tus tareas y exámenes ahora con Quizwiz!

Marketing is concerned with the ___________"p's". a. 2 b. 3 c. 4 d. 5

4

Which is a better bond rating? a. DDD b. CC c. A d. AA

AA

When products plot outside the Rough Cut: a. Sales are a little higher b. Sales are a little lower c. Sales are high d. Sales are zero

Sales are zero

As the Automation level is reduced for a product, your company will incur a retooling cost. True False

True

customer buying criteria is found In the Race Track Report a. in the race track report b. On the Perceptual Map c. On a Time line d. in Market Segment Analysis

in market segment analysis

What two product characteristics does the Perceptual Map depict? a. Size and Performance b. Price and MTBF c. Reliability and Performance d. Size and Price wrong answer not sure what is correct answer

size and performance

In Capsim, age refers to: a. The perceived age of the product b. The absolute age of the product c. The age of the raw material d. The age of the customer

the perceived age of the produt

A market segment is a group of customers with similar purchasing concerns. True False

true

After you have uploaded your decisions to the web site, you can change your official decisions as many times as you want prior to the instructor processing the round. True False

true

Capacity must be purchased one year in advance before production can begin. True False

true

Earning Per Share is calculated by dividing Net Profit by the number of shares outstanding. True False

true

If your firm has a low debt/asset ratio, interest rates are near prime. True False

true

In Capsim, each round is the equivalent of one year. True False

true

Increases in the promotion budget will eventually have diminishing returns

true

Increasing the Automation rating will decrease the needed HR complement. True False

true

Low-tech customers do not expect to pay High tech prices. True false

true

Lowering prices increases demand. True False

true

Small size and fast performance best identifies with a high tech product true false

true

The Ideal Spot for High Tech is found by taking the exact center of the circle and subtract 1.4 to the size coordinate then add 1.4 from the performance coordinate. True False

true

The higher the automation rating, the greater the amount of time and money needed to revise the product true false

true

The relative cost of a product's Material increases as: Size is decreased, Performance is increased and MTBF is raised. True False

true

The relative cost of a product's material increases as size is decreased. True False

true

The segments are all drifting towards the lower-right section of the perceptual map because customers want smaller and faster products. True False

true

When opening the Excel version of Foundation ®, you should enable Macros. True False

true

Whenever you change the position/coordinates of one of your products, the customers perceptually cut the product's age in half. True False

true

Whenever you change the position/coordinates of one of your products, the customers perceptually cut the product's age in half. True False

true

when an R&D effort is started in 2001. the product revision takes effect in 2002 true false

true

R&D completion time can be diminished a. by repositioning a product. b. when several products are put into R&D at the same time. c. the more a company changes a product's MTBF. d. None of the above

when several products are put into R&D at the same time

Which of the following is not addressed by R&D? a. Performance b. Size c. Workforce Complement d. None of the above

workforce complement

Decisions are made once per simulated year on what simulated date? a. 31 December b. 01 July c. 01 January d. None of the above

01 January

A product priced $1 above or below the segment guideline loses _____% of its appeal. (Buyers market) a. 5 b. 10 c. 15 d. 20

10

At what dollar amount above the segment guidelines is all consumer appeal lost? a. $3 b. $5 c. $10 d. $20

10

The maximum automation rating on any given production line is a. 3 b. 6 c. 7 d. 10

10

Which Automation rating pushes the revision date out the furthest? a. 1 b. 5 c. 9 d. 10

10

Changing the MTBF for a product has a direct impact on manufacturing cost because: a. MTBF is one factor that drives material costs. Higher MTBF translates into higher material costs (and more reliable products) while lower MTBF translates into lower costs (and less reliable products). b. Higher MTBF means lower prices due to bulk buying c. Higher MTBF increases marketing expenses (upper clientele) d. Higher MTBF changes require lower investments in the factory, which drive up the cost of your product.

MTBF is one factor that drives material costs. Higher MTBF translates into higher material costs (and more reliable products) while lower MTBF translates into lower costs (and less reliable products).

If you are marketing to High Tech customers, which criteria is most important to them in order of importance? a. Positioning, MTBF, Age, Price b. Price, Age, MTBF, Positioning c. MTBF, Positioning, Age, Price d. Positioning, Age, Price, and Reliability

Positioning, age, price and reliability

Foundation breaks decision-making down into four basic functional areas with two optional areas (professor's discretion). What are the six functional areas? a. R & D, Marketing, Production, Finance, HR and TQM (last two are optional) b. Price, Promotion, Planning, Production, Investments (optional), and Programming (optional) c. Position, Price, Reliability, Age, and Rough-cut (optional), and Fine-cut (optional) d. None of the above

R & D, Marketing, Production, Finance, HR and TQM (last two are optional)

On the perceptual map, a product's segment circles drift: a. Left b. Right c. Up & Left d. Down & Right

down & right

What does your company manufacture? a. Flux capacitors b. Electronic sensors c. Micro cyber-chips for war munitions d. Electro-magnetic field suppressors

electronic sensors

A product with a MTBF of 1000 hours below the segment guideline does not lose any of its appeal. (Buyers market) True False

false

All products must be retired in Capsim. True False

false

Changes made in R&D has no affect on the product revision date. True False

false

Changes to product attributes are made when the cells are yellow. true false

false

Decreasing the MTBF will typically increase customer apeal for High Tech consumers. True False

false

High tech customers are willing to pay any price to get the latest and best technology true false

false

If i lower my automation level I will raise my cost to double capacity true false

false

If you have a really lousy product (i.e. poor position, poor age, high price) you can just spend a lot in advertising and sales to make up for it and get the same results as a company with a superior product. True False

false

In Capsim, each team starts off with 2 products. True False

false

In Capsim, the term MTBF means multiple transient business format. True False

false

Paying dividends using debt always has a positive impact on EPS (Earnings Per Share). True False

false

Paying dividends using debt always has a positive impact on EPS (Earnings Per Share). True False

false

R&D completion time depends on just two things: number of projects in R&D & automation rating. True False

false

Taking an Emergency Loan when other alternatives are still available is acceptable business practice in Capsim. True False

false

The Foundation Fast Trackk report (FFR) is generated every other round true false

false

The Ideal Spot is not the area of highest buyer concentration. True False

false

The Low Tech Market segment prefers newer younger products. True False

false

The following are all acceptable ways to raise capital: short term debt, long term debt, C. emergency loan and stock issues. True False

false

The higher the Automation Level, the shorter the R & D completion time. True False

false

The more products your company has in R&D, the earlier the revision date is

false

There are 3 segments in Capsim true false

false

When a product is moved to a new location on the Perceptual Map, the Perceived Age (or Age) is cut by 30%. True False

false

Which segment circle drifts faster? a. Low Tech b. High Tech c. They both move at the same rate d. None of the above

high tech

What happens to a product's Perceived Age when it is repositioned in R&D? a. It is reduced by 30%. b. It is reduced by 50%. c. It is reduced by 10%. d. It remains the same

it is reduced by 50%

There are two market segments that constitute your customer base in Foundation. What are the two segments called? a. Size and Performance b. Price and Performance c. Low Tech and High Tech d. Reliability and Performance

low tech and high tech

My team needs to determine which TQM initiatives best serve _______ ________________ _______________. a. the other teams. b. our company's purpose. c. Green Programs only. d. None of the above

our company's purpose

What is the most important criteria to a "High Tech Segment" customer? a. Price b. Age c. Position d. MTBF

position

What is the most important buying criteria to a "Low Tech Segment" customer? a. Age b. Price c. MTBF d. Positioning

price

Which product attribute do Low Tech customers value the most? a. Age b. Positioning c. Quality d. Price

price

Low Tech customers emphasize buying criteria in which order? a. Price, Reliability, Positioning, Age b. Price, Positioning, Age, Reliability c. Positioning, Age, Price, Reliability d. Price, Age, Reliability, and Position

price, age, reliability and position

During the simulation, your customers' expectations will constantly change. What are your customers going to want? a. Positioning that is way upper right on the Perceptual Map b. Lower MTBF c. Products with smaller size and higher performance d. Products with larger size and higher performance

product with smaller size and higher performance

Adding capacity is purchased by entering a positive value in the: a. Finance page b. R & D page c. Balance Sheet page d. Production page

production page

New products are launched in what functional area? a. Marketing b. Production c. R & D d. Finance

r&d

My team desires to increase our margin per unit. We can: a. Lower the selling price b. Raise the material costs c. Raise the labor costs d. Raise the selling price

raise the selling price


Conjuntos de estudio relacionados

Medical Terminology - Chapter 4 - Musculoskeletal System

View Set

MISY 5325 Excel Midterm Ultimate Review

View Set

(Chapter 24) South and Southeast Asia after 1200

View Set

Current Liabilities and Contingencies

View Set

Marketing Chapter 14: Engaging Customers and Communicating Customer Value

View Set

Both/And and Either/Or Approaches

View Set

Accounting 001 - Study questions chapters 11-14

View Set

Simple/compound interest and present/future value

View Set

Electrochemistry and Nuclear Chemistry

View Set