CCNA ITNv7 Final Exam
What are two features of ARP?
1. If a host is ready to send a packet to a local destination device and it has the IP address but not the MAC address of the destination, it generates an ARP broadcast. 2. If a device receiving an ARP request has the destination IPv4 address, it responds with an ARP reply.
A network administrator is adding a new LAN to a branch office. The new LAN must support 61 connected devices. What is the smallest network mask that the network administrator can use for the new network?
255.255.255.192
What subnet mask is needed if an IPv4 network has 40 devices that need IP addresses and address space is not to be wasted?
255.255.255.192
A network administrator is adding a new LAN to a branch office. The new LAN must support 4 connected devices. What is the smallest network mask that the network administrator can use for the new network?
255.255.255.248
What are three characteristics of the CSMA/CD process?
After detecting a collision, hosts can attempt to resume transmission after a random time delay has expired. All of the devices on a segment see data that passes on the network medium. A device listens and waits until the media is not busy before transmitting.
What service is provided by Internet Messenger?
An application that allows real-time chatting among remote users.
Refer to the exhibit. If host A sends an IP packet to host B, what will the destination address be in the frame when it leaves host A?
BB:BB:BB:BB:BB:BB
What method is used to manage contention-based access on a wireless network?
CSMA/CA
What happens when the transport input ssh command is entered on the switch vty lines?
Communication between the switch and remote users is encrypted Answers Explanation & Hints: The transport input ssh command when entered on the switch vty (virtual terminal lines) will encrypt all inbound controlled telnet connections.
A client packet is received by a server. The packet has a destination port number of 67. What service is the client requesting?
DHCP
A client packet is received by a server. The packet has a destination port number of 53. What service is the client requesting?
DNS
Which type of server relies on record types such as A, NS, AAAA, and MX in order to provide services?
DNS Explanation: A DNS server stores records that are used to resolve IP addresses to host names. Some DNS record types include the following: A - an end device IPv4 address NS - an authoritative name server AAAA - an end device IPv6 address MX - a mail exchange record
A network administrator notices that some newly installed Ethernet cabling is carrying corrupt and distorted data signals. The new cabling was installed in the ceiling close to fluorescent lights and electrical equipment. Which two factors may interfere with the copper cabling and result in signal distortion and data corruption?
EMI and RFI
A new network administrator has been asked to enter a banner message on a Cisco device. What is the fastest way a network administrator could test whether the banner is properly configured?
Exit privileged EXEC mode and press Enter. Answers Explanation & Hints: While at the privileged mode prompt such as Router#, type exit ,press Enter , and the banner message appears. Power cycling a network device that has had the banner motd command issued will also display the banner message, but this is not a quick way to test the configuration.
A client packet is received by a server. The packet has a destination port number of 21. What service is the client requesting?
FTP
A host is trying to send a packet to a device on a remote LAN segment, but there are currently no mappings in the ARP cache. How will the device obtain a destination MAC address?
It will send an ARP request for the MAC address of the default gateway.
Which two protocols operate at the top layer of the TCP/IP protocol suite?
POP, DNS
A client packet is received by a server. The packet has a destination port number of 110. What service is the client requesting?
POP3
A wired laser printer is attached to a home computer. That printer has been shared so that other computers on the home network can also use the printer. What networking model is in use?
Peer-to-peer
Which switching method drops frames that fail the FCS check?
Store-and-forward switching
Switch1>configure terminal ^ % Invalid input detected at '^' marker. Why do you see this message?
The administrator must first enter privileged EXEC mode before issuing the command.
A technician with a PC is using multiple applications while connected to the Internet. How is the PC able to keep track of the data flow between multiple application sessions and have each application receive the correct packet flows?
The data flow is being tracked based on the source port number that is used by each application.
Data is being sent from a source PC to a destination server. Which three statements correctly describe the function of TCP or UDP in this situation?
The source port field identifies the running application or service that will handle data returning to the PC. UDP segments are encapsulated within IP packets for transport across the network. The UDP destination port number identifies the application or service on the server which will handle the data.
What characteristic describes a VPN?
a tunneling protocol that provides remote users with secure access into the network of an organization
Which frame field is created by a source node and used by a destination node to ensure that a transmitted data signal has not been altered by interference, distortion, or signal loss?
frame check sequence field
Which layer of the TCP/IP model provides a route to forward messages through an internetwork?
internet
What command can be used on a Windows PC to see the IP configuration of that computer?
ipconfig
What characteristic describes a Trojan horse?
malicious software or code running on an end device
What characteristic describes a virus?
malicious software or code running on an end device
What three requirements are defined by the protocols used in network communcations to allow message transmission across a network?
message encoding delivery options message size
What is the purpose of the TCP sliding window?
to request that a source decrease the rate at which it transmits data
How does the service password-encryption command enhance password security on Cisco routers and switches?
It encrypts passwords that are stored in router or switch configuration files.
A client packet is received by a server. The packet has a destination port number of 69. What service is the client requesting?
TFTP
What is the consequence of configuring a router with the ipv6 unicast-routing global configuration command?
The IPv6 enabled router interfaces begin sending ICMPv6 Router Advertisement messages
Which three layers of the OSI model map to the application layer of the TCP/IP model?
application, session, presentation
What are the three parts of an IPv6 global unicast address?
subnet ID global routing prefix interface ID
A user is executing a tracert to a remote device. At what point would a router, which is in the path to the destination device, stop forwarding the packet?
when the value in the TTL field reaches zero
A network administrator needs to keep the user ID, password, and session contents private when establishing remote CLI connectivity with a switch to manage it. Which access method should be chosen?
SSH
What is the consequence of configuring a router with the ipv6 unicast-routing global configuration command?
The IPv6 enabled router interfaces begin sending ICMPv6 Router Advertisement messages.
What attribute of a NIC would place it at the data link layer of the OSI model?
The MAC Address
What is an advantage for small organizations of adopting IMAP instead of POP?
Messages are kept in the mail servers until they are manually deleted from the email client.
A company has a file server that shares a folder named Public. The network security policy specifies that the Public folder is assigned Read-Only rights to anyone who can log into the server while the Edit rights are assigned only to the network admin group. Which component is addressed in the AAA network service framework?
authorization
Which wireless technology has low-power and low-data rate requirements making it popular in IoT environments?
Zigbee is a specification used for low-data rate, low-power communications. It is intended for applications that require short-range, low data-rates and long battery life. Zigbee is typically used for industrial and Internet of Things (IoT) environments such as wireless light switches and medical device data collection.
An IPv6 enabled device sends a data packet with the destination address of FF02::2. What is the target of this packet?
all IPv6 configured routers on the local link
Which two traffic types use the Real-Time Transport Protocol (RTP)?
1) Video 2) Voice
What would be the interface ID of an IPv6 enabled interface with a MAC address of 1C-6F-65-C2-BD-F8 when the interface ID is generated by using the EUI-64 process?
1E6F:65FF:FEC2:BDF8
An organization is assigned an IPv6 address block of 2001:db8:0:ca00::/56. How many subnets can be created without using bits in the interface ID space?
256
What service is provided by HTTP?
A basic set of rules for exchanging text, graphic images, sound, video, and other multimedia files on the web.
An administrator defined a local user account with a secret password on router R1 for use with SSH. Which three additional steps are required to configure R1 to accept only encrypted SSH connections?
Explanation: There are four steps to configure SSH support on a Cisco router: Step 1: Set the domain name. Step 2: Generate one-way secret keys. Step 3: Create a local username and password. Step 4: Enable SSH inbound on a vty line.
What mechanism is used by a router to prevent a received IPv4 packet from traveling endlessly on a network?
It decrements the value of the TTL field by 1 and if the result is 0, it discards the packet and sends a Time Exceeded message to the source host.
What is an advantage to using a protocol that is defined by an open standard?
It encourages competition and promotes choices.
A client is using SLAAC to obtain an IPv6 address for its interface. After an address has been generated and applied to the interface, what must the client do before it can begin to use this IPv6 address?
It must send an ICMPv6 Neighbor Solicitation message to ensure that the address is not already in use on the network.
What is one main characteristic of the data link layer?
It shields the upper layer protocol from being aware of the physical medium to be used in the communication.
What service is provided by BOOTP?
Legacy application that enables a diskless workstation to discover its own IP address and find a BOOTP server on the network.
An employee of a large corporation remotely logs into the company using the appropriate username and password. The employee is attending an important video conference with a customer concerning a large sale. It is important for the video quality to be excellent during the meeting. The employee is unaware that after a successful login, the connection to the company ISP failed. The secondary connection, however, activated within seconds. The disruption was not noticed by the employee or other employees. What three network characteristics are described in this scenario?
Quality of Service, Security, Fault Tolerance
A user sends an HTTP request to a web server on a remote network. During encapsulation for this request, what information is added to the address field of a frame to indicate the destination?
The MAC address of the default gateway
Which value, that is contained in an IPv4 header field, is decremented by each router that receives a packet?
Time-to-live
Which type of security threat would be responsible if a spreadsheet add-on disables the local software firewall?
Trojan Horse
Which wireless technology has low-power and data rate requirements making it popular in home automation applications?
ZigBee
What characteristic describes antispyware?
applications that protect end devices from becoming infected with malicious software
A group of Windows PCs in a new subnet has been added to an Ethernet network. When testing the connectivity, a technician finds that these PCs can access local network resources but not the Internet resources. To troubleshoot the problem, the technician wants to initially confirm the IP address and DNS configurations on the PCs, and also verify connectivity to the local router. Which three Windows CLI commands and utilities will provide the necessary information?
ping ipconfig nslookup
A disgruntled employee is using some free wireless networking tools to determine information about the enterprise wireless networks. This person is planning on using this information to hack the wireless network. What type of attack is this?
reconnaissance
What characteristic describes adware?
software that is installed on a user device and collects information about the user
What technique is used with UTP cable to help protect against signal interference from crosstalk?
twisting the wires together in pairs
What are two problems that can be caused by a large number of ARP request and reply messages?
1) A large number of ARP request and reply messages may slow down the switching process, leading the switch to make many changes in its MAC table. 2) The ARP request is sent as a broadcast, and will flood the entire subnet.
What is the subnet ID associated with the IPv6 address 2001:DA48:FC5:A4:3D1B::1/64?
2001:DA48:FC5:A4::/64 Explanation: The /64 represents the network and subnet IPv6 fields. The fourth field of hexadecimal digits is referred to as the subnet ID. The subnet ID for this address is 2001:DA48:FC5:A4::0/64.
A client packet is received by a server. The packet has a destination port number of 80. What service is the client requesting?
HTTP
A host is trying to send a packet to a device on a remote LAN segment, but there are currently no mappings in its ARP cache. How will the device obtain a destination MAC address?
It will send an ARP request for the MAC address of the default gateway.
Which connector is used with twisted-pair cabling in an Ethernet LAN?
RJ45
Three bank employees are using the corporate network. The first employee uses a web browser to view a company web page in order to read some announcements. The second employee accesses the corporate database to perform some financial transactions. The third employee participates in an important live audio conference with other corporate managers in branch offices. If QoS is implemented on this network, what will be the priorities from highest to lowest of the different data types?
audio conference, financial transactions, web page
What does the term "attenuation" mean in data communication?
loss of signal strength as distance increases Answers Explanation & Hints: Data is transmitted on copper cables as electrical pulses. A detector in the network interface of a destination device must receive a signal that can be successfully decoded to match the signal sent. However, the farther the signal travels, the more it deteriorates. This is referred to as signal attenuation.
What is a function of the data link layer?
provides for the exchange of frames over a common local media
During the process of forwarding traffic, what will the router do immediately after matching the destination IP address to a network on a directly connected routing table entry?
switch the packet to the directly connected interface
What characteristic describes identity theft?
the use of stolen credentials to access private data
Why would a Layer 2 switch need an IP address?
to enable the switch to be managed remotely Answers Explanation & Hints: A switch, as a Layer 2 device, does not need an IP address to transmit frames to attached devices. However, when a switch is accessed remotely through the network, it must have a Layer 3 address. The IP address must be applied to a virtual interface rather than to a physical interface. Routers, not switches, function as default gateways.
A user is complaining that an external web page is taking longer than normal to load. The web page does eventually load on the user machine. Which tool should the technician use with administrator privileges in order to locate where the issue is in the network?
tracert
What two ICMPv6 message types must be permitted through IPv6 access control lists to allow resolution of Layer 3 addresses to Layer 2 MAC addresses?
1)neighbor solicitations 2)neighbor advertisements
Which two functions are performed at the LLC sublayer of the OSI Data Link Layer to facilitate Ethernet communication?
1)places information in the Ethernet frame that identifies which network layer protocol is being encapsulated by the frame 2)enables IPv4 and IPv6 to utilize the same physical medium
What are two primary responsibilities of the Ethernet MAC sublayer?
1) Accessing the media 2) Data encapsulation
Which two statements are correct about MAC and IP addresses during data transmission if NAT is not involved?
1) Destination and source MAC addresses have local significance and change every time a frame goes from one LAN to another. 2) Destination IP addresses in a packet header remain constant along the entire path to a target host.
Which two statements describe features of an IPv4 routing table on a router?
1) Directly connected interfaces will have two route source codes in the routing table: C and S . 2) If a default static route is configured in the router, an entry will be included in the routing table with source code S .
A network technician is researching the use of fiber optic cabling in a new technology center. Which two issues should be considered before implementing fiber optic media?
1) Fiber optic cabling requires different termination and splicing expertise from what copper cabling requires. 2) Fiber optic provides higher data capacity but is more expensive than copper cabling.
What are two common causes of signal degradation when using UTP cabling?
1) Low quality cable or connectors 2) Improper termination
Which two statements accurately describe an advantage or a disadvantage when deploying NAT for IPv4 in a network?
1) NAT provides a solution to slow down the IPv4 address depletion. 2) NAT introduces problems for some applications that require end-to-end connectivity.
What are two characteristics shared by TCP and UDP?
1) Port Numbering 2) Use of Checksum
Which two statements are correct in a comparison of IPv4 and IPv6 packet headers?
1) The Source Address field name from IPv4 is kept in IPv6 2) The Time-to-Live field from IPv4 has been replaced by the Hop Limit field in IPv6.
What are the two most effective ways to defend against malware?
1) Update the operating system and other application software. 2) Install and update antivirus software.
What are two functions that are provided by the network layer?
1) directing data packets to destination hosts on other networks 2) providing end devices with a unique network identifier
Which two functions are performed at the MAC sublayer of the OSI Data Link Layer to facilitate Ethernet communication?
1) integrates Layer 2 flows between 10 Gigabit Ethernet over fiber and 1 Gigabit Ethernet over copper 2) implements CSMA/CD over legacy shared half-duplex media
What are three commonly followed standards for constructing and installing cabling?
1) pinouts 2) cable lengths 3) connector types
Which two commands can be used on a Windows host to display the routing table?
1) route print 2) netstat -r
Which two statements describe how to assess traffic flow patterns and network traffic types using a protocol analyzer?
1)Capture traffic during peak utilization times to get a good representation of the different traffic types. 2)Perform the capture on different network segments.
A user is attempting to access http://www.cisco.com/ without success. Which two configuration values must be set on the host to allow this access?
1)DNS Server 2)Default Gateway
What are two ICMPv6 messages that are not present in ICMP for IPv4?
1)Router Advertisement 2)Neighbor Solicitation
What two security solutions are most likely to be used only in a corporate environment?
1)intrusion prevention systems 2)virtual private networks
What service is provided by DNS?
Resolves domain names, such as cisco.com, into IP addresses.
Which subnet would include the address 192.168.1.96 as a usable host address?
192.168.1.64/26 Explanation: For the subnet of 192.168.1.64/26, there are 6 bits for host addresses, yielding 64 possible addresses. However, the first and last subnets are the network and broadcast addresses for this subnet. Therefore, the range of host addresses for this subnet is 192.168.1.65 to 192.168.1.126. The other subnets do not contain the address 192.168.1.96 as a valid host address.
Refer to the exhibit. A network engineer has been given the network address of 192.168.99.0 and a subnet mask of 255.255.255.192 to subnet across the four networks shown. How many total host addresses are unused across all four subnets?
200 Explanation: The network IP address 192.168.99.0 and a subnet mask of 255.255.255.192 provides 62 usable IP addresses for each subnet. Subnet A needs 30 host addresses. There are 32 addresses wasted. Subnet B uses 2 of the 62 available IP addresses, because it is a serial link. Consequently, it wastes 60 addresses. Likewise, subnet C wastes 60 addresses. Subnet D needs 14 addresses, so it wastes 48 addresses. The total wasted addresses are 32+60+60+48=200 addresses.
A network administrator is adding a new LAN to a branch office. The new LAN must support 200 connected devices. What is the smallest network mask that the network administrator can use for the new network?
255.255.255.0
A network administrator is adding a new LAN to a branch office. The new LAN must support 25 connected devices. What is the smallest network mask that the network administrator can use for the new network?
255.255.255.224
A network administrator wants to have the same network mask for all networks at a particular small site. The site has the following networks and number of devices: IP phones - 22 addresses PCs - 20 addresses needed Printers - 2 addresses needed Scanners - 2 addresses needed The network administrator has deemed that 192.168.10.0/24 is to be the network used at this site. Which single subnet mask would make the most efficient use of the available addresses to use for the four subnetworks?
255.255.255.224 Explanation: If the same mask is to be used, then the network with the most hosts must be examined for the number of hosts, which in this case is 22 hosts. Thus, 5 host bits are needed. The /27 or 255.255.255.224 subnet mask would be appropriate to use for these networks.
A network administrator wants to have the same subnet mask for three subnetworks at a small site. The site has the following networks and numbers of devices: Subnetwork A: IP phones - 10 addresses Subnetwork B: PCs - 8 addresses Subnetwork C: Printers - 2 addresses What single subnet mask would be appropriate to use for the three subnetworks?
255.255.255.240 Explanation: The largest subnet in the topology has 100 hosts in it so the subnet mask must have at least 7 host bits in it (27-2=126). 255.255.255.0 has 8 hosts bits, but this does not meet the requirement of providing the maximum number of subnets.
Which scenario describes a function provided by the transport layer?
A student has two web browser windows open in order to access two web sites. The transport layer ensures the correct web page is delivered to the correct browser window.
Refer to the exhibit. Which two network addresses can be assigned to the network containing 10 hosts? Your answers should waste the fewest addresses, not reuse addresses that are already assigned, and stay within the 10.18.10.0/24 range of addresses.
Addresses 10.18.10.0 through 10.18.10.63 are taken for the leftmost network. Addresses 192 through 199 are used by the center network. Because 4 host bits are needed to accommodate 10 hosts, a /28 mask is needed. 10.18.10.200/28 is not a valid network number. Two subnets that can be used are 10.18.10.208/28 and 10.18.10.224/28.
Which range of link-local addresses can be assigned to an IPv6-enabled interface?
FE80::/10 Explanation: Link-local addresses are in the range of FE80::/10 to FEBF::/10. The original IPv6 specification defined site-local addresses and used the prefix range FEC0::/10, but these addresses were deprecated by the IETF in favor of unique local addresses. FDEE::/7 is a unique local address because it is in the range of FC00::/7 to FDFF::/7. IPv6 multicast addresses have the prefix FF00::/8.
What two pieces of information are displayed in the output of the show ip interface brief command?
IP Addresses Layer 1 statuses
Refer to the exhibit. Match the network with the correct IP address and prefix that will satisfy the usable host addressing requirements for each network
Network A needs to use 192.168.0.0 /25 which yields 128 host addresses. Network B needs to use 192.168.0.128 /26 which yields 64 host addresses. Network C needs to use 192.168.0.192 /27 which yields 32 host addresses. Network D needs to use 192.168.0.224 /30 which yields 4 host addresses.
Refer to the exhibit. The IP address of which device interface should be used as the default gateway setting of host H1?
R1: G0/0
What service is provided by POP3?
Retrieves email from the server by downloading the email to the local mail application of the client.
The global configuration command ip default-gateway 172.16.100.1 is applied to a switch. What is the effect of this command?
The switch can be remotely managed from a host on another network
Refer to the exhibit. What is wrong with the displayed termination?
The untwisted length of each wire is too long.
What service is provided by HTTPS?
Uses encryption to secure the exchange of text, graphic images, sound, and video on the web
What are two characteristics of IP?
does not require a dedicated end-to-end connection operates independently of the network media
A technician can ping the IP address of the web server of a remote company but cannot successfully ping the URL address of the same web server. Which software utility can the technician use to diagnose the problem?
nslookup
The switches have a default configuration. Host A needs to communicate with host D, but host A does not have the MAC address for the default gateway. Which network devices will receive the ARP request sent by host A?
only hosts B, C, and router R1
What are proprietary protocols?
protocols developed by organizations who have control over their definition and operation
Refer to the exhibit. If PC1 is sending a packet to PC2 and routing has been configured between the two routers, what will R1 do with the Ethernet frame header attached by PC1?
remove the Ethernet header and configure a new Layer 2 header before sending it out S0/0/0
A network administrator is designing the layout of a new wireless network. Which three areas of concern should be accounted for when building a wireless network? (
security interference coverage area
What characteristic describes spyware?
software that is installed on a user device and collects information about the user
When a switch configuration includes a user-defined error threshold on a per-port basis, to which switching method will the switch revert when the error threshold is reached?
store-and-forward
Which information does the show startup-config command display?
the contents of the saved configuration file in the NVRAM
What will happen if the default gateway address is incorrectly configured on a host?
the host cannot communicate with hosts in other networks
Users are reporting longer delays in authentication and in accessing network resources during certain time periods of the week. What kind of information should network engineers check to find out if this situation is part of a normal network behavior?
the network performance baseline
Users report that the network access is slow. After questioning the employees, the network administrator learned that one employee downloaded a third-party scanning program for the printer. What type of malware might be introduced that causes slow performance of the network?
worm