CCNA Questions

¡Supera tus tareas y exámenes ahora con Quizwiz!

How many switch ports are designated ports on the root bridge? All of them None of them One Two

How many switch ports are designated ports on the root bridge? All of them

In which type of applications does the user need to wait for a response when performing actions such as inventory lookup or a database update? * batch applications * real-time applications * interactive applications * human-to-human applications

In which type of applications does the user need to wait for a response when performing actions such as inventory lookup or a database update? interactive applications

Where is the MAC table stored in a Cisco switch? * content-addressable memory (CAM) * network interface card (NIC) * random access memory (RAM) * read-only memory (ROM)

Where is the MAC table stored in a Cisco switch? content-addressable memory (CAM)

What are three examples of remote access locations? (Choose three.) * branch offices * head office * small office/home office * main office * a network in an airport lounge

* branch offices * small office/home office * a network in an airport lounge

Which network characteristic indicates the dependability of the components that make up the network? * reliability * scalability * security * availability

* reliability

A company currently has a network range of 192.168.54.0/24. The company wants to subnet this range into 4 subnets, each supporting at least 30 users. Which subnet mask would you recommend? * 255.255.255.224 * 255.255.255.128 * 255.255.255.240 * 255.255.255.192

A company designs its network so that the PCs in the internal network are assigned IPv4 addresses from DHCP servers, and the packets that are sent to the internet are translated through a NAT-enabled router. Which type of NAT enables the router to populate the translation table from a pool of unique public addresses, as the PCs send packets through the router to the internet? static NAT dynamic NAT PAT port forwarding

A large company has a /8 network but needs to subnet it into 1000 subnets. Which subnet mask segments the /8 network and provides the maximum number of hosts per subnet? * 255.255.240.0. * 255.255.224.0. * 255.255.128.0. * 255.255.192.0.

A large company has a /8 network but needs to subnet it into 1000 subnets. Which subnet mask segments the /8 network and provides the maximum number of hosts per subnet? 255.255.192.0.

A network administrator configures the border router with the command ip NAT inside source list 14 pool accounting. Which ACL is required to be configured in order for this command to function? • An access list named accounting that defines the starting and ending public IPv4 addresses. • An access list named accounting that defines the private addresses that are translated by NAT. • An access list that is numbered 14 that defines the starting and ending public IPv4 addresses. • An access list that is numbered 14 that defines the private addresses that are translated by NAT.

A network administrator is writing a standard IPv4 ACL that will deny traffic from the 172.16.0.0/16 network and permit all other traffic. Which two commands should be used? (Choose two.) * Router(config)# access-list 95 deny any * Router(config)# access-list 95 deny 172.16.0.0 0.0.255.255 * Router(config)# access-list 95 deny 172.16.0.0 255.255.0.0 * Router(config)# access-list 95 permit any * Router(config)# access-list 95 deny host 172.16.0.0 * Router(config)# access-list 95 deny 172.16.0.0 255.255.255.255

Identify the missing step in the description of the standard switching process. 1. The switch receives a broadcast frame. 2. [Identify the step] 3. The switch floods the frame out all ports. 4. The destination devices reply to the broadcast. * The switch enters the destination MAC address and switch port into its MAC table. * The switch does not learn the MAC address. * The switch enters the source MAC address and switch port into its MAC table. * The switch enters only the source MAC address into its MAC table.

If POST completes during a startup of a Cisco device and there is no configuration file, what does the router do? * It reboots. * It initiates initial configuration through "setup." * It creates a configuration file with default settings and boots that file. * It shuts down the router.

If POST completes during a startup of a Cisco device and there is no configuration file, what does the router do? It initiates initial configuration through "setup."

Match the OSPF neighbor states on a LAN with their correct positions in the right order from 1-7 down INIT two-way exstart exchange loading full

Match the OSPF neighbor states on a LAN with their correct positions in the right order. down 1 INIT 2 two-way 3 exstart 4 exchange 5 loading 6 full 7

One of the drawbacks of NAT is that it might disrupt services that require the initiation of TCP connections from the outside network or disrupt stateless protocols, such as those using UDP. Why is NAT disruptive in these two cases? Inbound (outside to inside connections) depend on the presence of NAT mapping to be forwarded to the receiving host inside the network. NAT mappings can time out and, therefore, prevent the device from translating the incoming packets, which end up discarded. TCP connections require three-way handshake to be completed. NAT allows initial TCP segment, which has flags SYN and ACK set to pass only from the inside to the outside and not from the outside to the inside. NAT does not translate ackets for protocols that do not establish connections and do not maintain the state of the connections. For applications that use UDP, NAT always translates both IPv4 address and port number. Since UDP applications can use whatever port number, it is impossible to make mappings for all; therefore, NAT translations will not happen and UDP segments get discarded.

Which network characteristic would best describe how well the network would support business critical applications in case of an unexpected increase of traffic? * speed * security * QoS * Reliability

QoS

R1 and R2 attach to the same Ethernet VLAN, with subnet 10.1.19.0/25 with addresses 10.1.19.1 and 10.1.19.2, respectively, configured with the ip address interface subcommand. Host A refers to 10.1.19.1 as its default router, and host B refers to 10.1.19.2 as its default router. The routers do not use FHRP. Which of the following is a problem for this LAN? (See Picture)

R1 and R2 attach to the same Ethernet VLAN, with subnet 10.1.19.0/25, with 10.1.19.1 and 10.1.19.2, respectively, configured with the ip address interface subcommand. The routers use FHRP. - 10.1.19.1 - 10.1.19.2 - Another IP address in subnet 10.1.19.0/25 other than 10.1.19.1 and 10.1.19.2 - A host name that the FHRP mini-DNS will initially point to 10.1.19.1

R1 and R2 attach to the same Ethernet VLAN, with subnet 10.1.19.0/25, with 10.1.19.1 and 10.1.19.2, respectively, configured with the ip address interface subcommand. The routers use FHRP. Host A and Host B attach to the same LAN and have correct default router settings per the FHRP configuration. Which of the following statements is true for this LAN? (See pic)

R1 and R2 attach to the same Ethernet VLAN, with subnet 10.1.19.0/25, with 10.1.19.1 and 10.1.19.2, respectively, configured with the ip address interface subcommand. The routers use FHRP. Host A and Host B attach to the same LAN and have correct default router settings per the FHRP configuration. Which of the following statements is true for this LAN? If one router fails both hosts will use the one remaining router as a default router.

R1 and R2 routers in your company's infrastructure are participating in HSRP group 1. R1 is the active router with a priority of 120 and R2 has the default priority. You accidently rebooted R1, and R2 became the active router. Once R1 is back online, which statement will be true? R1 will always become the active router. R2 will always remain the active router. R1 will become the active router only if preempt is enabled. Both routers will be in active state.

R1 and R2 routers in your company's infrastructure are participating in HSRP group 1. R1 is the active router with a priority of 120 and R2 has the default priority. You accidently rebooted R1, and R2 became the active router. Once R1 is back online, which statement will be true? R1 will become the active router only if preempt is enabled.

Refer to the exhibit showing the NAT information on the device. Which command was used to provide the output? (see Picture) show ip NAT translations show running-configuration show interface status show ip NAT statistics

Refer to the exhibit showing the NAT information on the device. Which command was used to provide the output? show ip NAT statistics

Refer to the exhibit. The router NAT configuration command is shown above the router. A user is trying to access company web server by using the URL http://192.168.10.254. What is the user doing wrong? · The user is using an IPv4 address in the URL, instead of a domain name. · The user is using an incorrect IPv4 address. · The user is using unsecure HTTP protocol, instead of secure HTTPS. · The user is not doing anything wrong, the mapping in the NAT command is wrong. · The user is not doing anything wrong, the NAT configuration does not allow inbound connections.

Refer to the exhibit. Which combinations will result in an EtherChannel being established between the two switches that are using LACP? (Choose two.) switch 1 on, switch 2 active switch 1 active, switch 2 active switch 1 active, switch 2 passive switch 1 passive, switch 2 passive switch 1 on, switch 2 on

Refer to the exhibit. Which combinations will result in an EtherChannel being established between the two switches that are using LACP? (Choose two.) switch 1 active, switch 2 active switch 1 active, switch 2 passive

Refer to the figure. Which path will Router A, running OSPF, install in the routing table in order to reach 10.10.1.0/24? The path A-B-C The path A-D-C The path C-B-A The path A-C

Refer to the figure. Which path will Router A, running OSPF, install in the routing table in order to reach 10.10.1.0/24? path A-D-C

Referring to the figure, the security policy for the network requires you to prevent PC2 from accessing the network 192.168.10.0/24. The access list shown in the figure is configured on router R1. What option would correctly apply the access list? (See picture) R1(config)# interface Gi0/0 R1(config-if)# ip access-group 15 out R1(config)# interface Gi0/1 R1(config-if)# ip access-group 15 out R1(config)# interface Gi0/1 R1(config-if)# ip access-group 15 in R1(config)# interface Gi0/2 R1(config-if)# ip access-group 15 out R1(config)# interface Gi0/2 R1(config-if)# ip access-group 15 in

The console port on a Cisco device may look like which option? * RJ-11 port * RJ-45 port * serial DB-9 port * RPS connector port

The console port on a Cisco device may look like which option? RJ-45 port

To configure NAT, one of the commands the administrator used was ip nat pool NAT-POOL 209.165.201.5 209.165.201.10 netmask 255.255.255.240. Assume that outside routers do not have a default route configured. Which two networks could be present in the routing tables of outside routers so that the two-way reachability exists between inside and outside hosts? (Choose two.) • route to 209.165.201.4/28 network • route to 209.165.201.0/28 network • route to 209.165.201.0/24 network • route to 172.16.1.0/24 network • route to 172.16.0.0/16 network • route to 209.165.201.1/32 network

To configure NAT, one of the commands the administrator used was ip nat pool NAT-POOL 209.165.201.5 209.165.201.10 netmask 255.255.255.240. Assume that outside routers do not have a default route configured. Which two networks could be present in the routing tables of outside routers so that the two-way reachability exists between inside and outside hosts? (Choose two.) route to 209.165.201.0/28 network route to 209.165.201.0/24 network

What are the three main objectives of TCP reliability? (Choose three.) * detection and retransmission of dropped packets * detection and remediation of duplicate or out-of-order data * avoidance of congestion in the network * detection of dropped packets; the application does the retransmission * detection of duplicate or out-of-order data; the application does the remediation * avoidance of delay in the network

What are two possible sources of fiber media issues? (Choose two.) * wiring becomes damaged * macrobend losses * new EMI sources are introduced * traffic patterns change * splice losses

What are two possible sources of fiber media issues? (Choose two.) macrobend losses splice losses

What device will de-encapsulate a frame, read the destination IPv4 address in the packet, forward a packet to outgoing interface and re-encapsulate packet in a different frame before sending? * router * switch * hub * server

What device will de-encapsulate a frame, read the destination IPv4 address in the packet, forward a packet to outgoing interface and re-encapsulate packet in a different frame before sending? router

What do VLANs do to improve network performance? · separate large broadcast domains into smaller broadcast domains · create large broadcast domains out of smaller broadcast domains · create one large virtual switch out of many physical switches · allow users to connect over radio frequency

What do VLANs do to improve network performance? separate large broadcast domains into smaller broadcast domains

What do you call a manually configured route with a subnet mask 255.255.255.255? * host route * dynamic route * floating static route * default route

What do you call a manually configured route with a subnet mask 255.255.255.255? host route

What does DHCP Option 43 provide for in a Cisco WLAN? DNS server name DNS domain name default gateway WLC IPv4 address

What does DHCP Option 43 provide for in a Cisco WLAN? WLC IPv4 address

What happens to a port that belongs to VLAN 5 after VLAN 5 is accidentally deleted? * The port goes to the error-disabled state and is not operational. * The port becomes inactive and will not be functional until the missing VLAN 5 is created. * The port remains operational. * The port is shut down.

What happens to a port that belongs to VLAN 5 after VLAN 5 is accidentally deleted? The port becomes inactive and will not be functional until the missing VLAN 5 is created.

What is a characteristic of multicast communication? * Information is sent to a specific group of devices. * Information is sent to all connected devices. * Information is sent to one specific device. * Information is always sent to two specific devices.

What is a characteristic of multicast communication? Information is sent to a specific group of devices

What is a concern of the default OSPF metric on Cisco routers? Links with speeds greater than 10 Gbps will not be supported until the release of OSPFv4. Links with speeds greater than 1 Gbps are converted to 10 Mbps for the purposes of OSPF cost calculation. Links with speeds greater than 100 Mbps have a cost of 1. Links with speeds greater than 1 Gbps require additional memory in the OSPF router or switch to calculate the larger costs.

What is a concern of the default OSPF metric on Cisco routers? Links with speeds greater than 100 Mbps have a cost of 1.

What is a main characteristic of DNS? * converting human-readable names of IP end systems into machine-readable IP addresses * automatically assigning an IP address from an IP address pool that the administrator defines * automatically assigning a domain name from a domain name pool that the administrator defines * forwarding DHCP packets between clients and servers

What is a main characteristic of DNS? converting human-readable names of IP end systems into machine-readable IP addresses

What is a major difference between TCP and UDP? TCP can ensure that the data is delivered, while UDP does not. UDP can ensure that the data is delivered, while TCP does not. TCP exists in the Transport layer of the TCP/IP model, while UDP exists in the Internet layer of the TCP/IP model. TCP exists in the Internet layer of the TCP/IP model, while UDP exists in the Transport layer of the TCP/IP model.

What is a major difference between TCP and UDP? TCP can ensure that the data is delivered, while UDP does not.

What is a use of Cisco Discovery Protocol? * to determine the platform version of the neighboring Cisco devices * to display information about the routing protocol * to display the MAC address and ARP information * to share information about non-Cisco equipment, such as the operating system version and IPv4 address

What is a use of Cisco Discovery Protocol? to determine the platform version of the neighboring Cisco devices

What is one way that QoS achieves a better and more predictable network service? • By building a separate infrastructure for business critical applications. • By providing tools for managing network congestion. • By virtualizing data center infrastructure. • By upgrading links on access layer.

What is one way that QoS achieves a better and more predictable network service? By providing tools for managing network congestion.

What is session multiplexing? a process by which an IP host is able to support multiple sessions simultaneously and manage the individual traffic streams over a single link a process by which an IP host is able to support multiple sessions simultaneously over multiple links a process that is used for congestion avoidance a process that is used for packet dropping

What is session multiplexing? a process by which an IP host is able to support multiple sessions simultaneously and manage the individual traffic streams over a single link

What is the ICMP type for the echo reply packets? 1 0 2 3

What is the ICMP type for the echo reply packets? 0

What is the availability percentage over a one year period of the network that is not available for 15 minutes each month? * 99.9657 percent * 0.9996 percent * 99.8457 percent * 0.0342 percent

What is the availability percentage over a one year period of the network that is not available for 15 minutes each month? 99.9657 percent

What is the correct way to configure an IPv6 default route? * ipv6 route 0.0.0.0 0.0.0.0 fe80::2 * ipv6 route ::/0 2001:db8::1 * ipv6 route ff::0/32 fe80::2 * ipv6 route ff::0/128 2001:0db8:feed::1

What is the correct way to configure an IPv6 default route? ipv6 route ::/0 2001:db8::1

What is the corresponding MAC address for the solicited node multicast address ff02:0000:0000:0000:0000:0001:ff17:fc0f? * 33-33-33-17-fc-0f * 00-00-33-17-fc-0f * 33-33-ff-17-fc-0f * ff-02-ff-17-fc-0f

What is the corresponding MAC address for the solicited node multicast address ff02:0000:0000:0000:0000:0001:ff17:fc0f? 33-33-ff-17-fc-0f

What is the first action the router does after it is powered up? * finds and loads IOS * finds and applies the configuration statements * runs POST to test the hardware * displays command line prompt

What is the first action the router does after it is powered up? runs POST to test the hardware

What is the function of a WLAN controller? * to monitor and control the incoming and outgoing network traffic * to automatically handle the configuration of wireless access point * to allow wireless devices to connect to a wired network * to connect networks and intelligently choose the best paths between networks

What is the function of a WLAN controller? to automatically handle the configuration of wireless access point

What is the function of a firewall? * to automatically handle the configuration of wireless access points * to allow wireless devices to connect to a wired network * to connect networks and intelligently choose the best paths between networks * to monitor and control the incoming and outgoing network traffic

What is the function of a firewall? to monitor and control the incoming and outgoing network traffic

What is the purpose of entering the ip nat inside source static tcp 192.168.10.2 80 209.165.200.223 8080 command at the global configuration prompt? · It identifies the inside NAT interface on the router. · It prevents the router from establishing a connection with any device that does not have the specified address and port number. · It binds the inside local address and local port to the specified inside global address and global port. · It enables a one-to-one translation between different internal port numbers.

What is the purpose of entering the ip nat inside source static tcp 192.168.10.2 80 209.165.200.223 8080 command at the global configuration prompt? It binds the inside local address and local port to the specified inside global address and global port.

What is the purpose of inter-VLAN routing? * to transport packets within VLANs * to convert packets from Layer 2 to Layer 3 * to transport packets between VLANs * to increase the security of VLANs to increase the scalability of VLANs

What is the purpose of inter-VLAN routing? to transport packets between VLANs

What is the purpose of link-state advertisements? * constructing a topological database * specifying the cost to reach a destination * determining the best path to a destination * verifying that a neighbor is still functioning

What is the purpose of link-state advertisements? constructing a topological database

What is the range for IPv6 link-local addresses? * fe80::/10 * fc00::/7 * fc00::/8 * fd00::/8

What is the range for IPv6 link-local addresses? fe80::/10

What is the range for IPv6 multicast addresses? ff00::/8 fc00::/7 fe80/10 fd00::/8

What is the range for IPv6 multicast addresses? ff00::/8

What must you ensure when configuring two ends of an 802.1Q trunk? * The native VLAN must be tagged. * The native VLAN must be the same. * DTP must be disabled. * DTP modes on both ends must be the same.

What must you ensure when configuring two ends of an 802.1Q trunk? The native VLAN must be the same.

What will the switch do if it determines that the destination MAC address of a received unicast frame resides on the same switch port as the source? * drop the frame and will not forward * forward the frame * determine which port a frame must be sent out to reach its destination * transmit the frame out all ports.

What will the switch do if it determines that the destination MAC address of a received unicast frame resides on the same switch port as the source? drop the frame and will not forward

When a frame is forwarded to the destination by a switch, what happens with Layer 2 and Layer 3 addresses in the frame? * The switch changes Layer 2 addresses, while Layer 3 addresses remain the same. * The switch changes Layer 3 addresses, while Layer 2 addresses remain the same. * No addresses are changed by the switch * The switch changes Layer 2 and Layer 3 addresses.

When a frame is forwarded to the destination by a switch, what happens with Layer 2 and Layer 3 addresses in the frame? No addresses are changed by the switch

Where within an enterprise network should classification and marking, and policing be performed? Core layer In end hosts Access layer Distribution layer

Where within an enterprise network should classification and marking, and policing be performed? Access Layer

Which AP usually connects to a switch access port (non-trunking)? - centralized AP (local mode) - standalone AP - none, all APs need to connect to a trunk port - standalone and centralized AP

Which AP usually connects to a switch access port (non-trunking)? centralized AP (local mode)

Which CLI command should you use to verify the IPv4 address on a Windows computer? * ipconfig * ipcheck * ifconfig * ipverify

Which CLI command should you use to verify the IPv4 address on a Windows computer? ipconfig

Which Cisco IOS command displays the services that are running by viewing its open ports? show control-plane host open-ports show services open-ports telnet open-ports ping open-ports

Which Cisco IOS command displays the services that are running by viewing its open ports? show control-plane host open-ports

Which Cisco IOS command do you use to display the ARP table on a Cisco device? * show arp table * show -a * show ip arp * arp -a

Which Cisco IOS command do you use to display the ARP table on a Cisco device? show ip arp

Which Cisco IOS global configuration command is needed to enable IPv6 routing on routers? * ipv6 unicast-routing * ipv6 routing * enable ipv6-routing ipv6 address

Which Cisco IOS global configuration command is needed to enable IPv6 routing on routers? ipv6 unicast-routing

Which Cisco IOS interface command assigns a static IPv6 address using an EUI-64 interface ID? * ipv6 address 2001:db8:2222:7272::72/64 * ipv6 address 2001:0db8:0:1::/64 eui-64 * eui-64 address 2001:0db8:0:1::/64 * ipv6 address 2001:0db8:0:1::0290:27ff:fe17:fc0f/64

Which Cisco IOS interface command assigns a static IPv6 address using an EUI-64 interface ID? ipv6 address 2001:0db8:0:1::/64 eui-64

Which Cisco IOS interface command specifies that the interface acquires an IPv4 address through DHCP? * ip address dhcp * dhcp address ip * ip helper-address * ip address request dhcp

Which Cisco IOS interface command specifies that the interface acquires an IPv4 address through DHCP? ip address dhcp

Which IPv4 address class is dedicated for multicast? * Class A * Class B * Class C * Class D * Class E

Which IPv4 address class is dedicated for multicast? Class D

Which OSI stack layers match the Application layer of the TCP/IP stack? * application layer, presentation layer, and session layer * presentation layer, session layer, and transport layer * application layer, presentation layer, session layer, and transport layer * network layer and transport layer

Which OSI stack layers match the Application layer of the TCP/IP stack? The application layer, presentation layer, session layer, and transport layer

Which QoS mechanism will drop the traffic if the flow uses more than the allotted bandwidth? marking policing shaping congestion management

Which QoS mechanism will drop the traffic if the flow uses more than the allotted bandwidth? policing

Which QoS tools analyze the traffic and decide which category the packet belongs in? • link-specific tools • policing and shaping tools • congestion management and scheduling tools • classification and marking tools

Which QoS tools analyze the traffic and decide which category the packet belongs in? classification and marking tools

Which address type is not supported in IPv6? * unicast * multicast * anycast * broadcast

Which address type is not supported in IPv6? broadcast

Which answers accurately describe facts related to the root's bridge ID? Choose two The system ID Extension value , in decimal 5 is 5 The Roots configured priority value is 32773 The root's configured priority value is 32768 The system ID extension value in hexadecimal is 1833.9d7b.0e80

Which answers accurately describe facts related to the root's bridge ID? Choose two The system ID Extension value , in decimal 5 is 5 The root's configured priority value is 32768

Which application of an ACL is indicated by the statement "ACLs can permit or deny user access to FTP or HTTP servers?" selection of traffic for prioritization selection of traffic for analyzing filtering of traffic to control access to network services restricting the delivery of routing updates

Which application of an ACL is indicated by the statement "ACLs can permit or deny user access to FTP or HTTP servers?" filtering of traffic to control access to network services

Which approach requires administrative maintenance when changes occur in the network? * static routing * dynamic routing * both dynamic routing and static routing * neither approach

Which approach requires administrative maintenance when changes occur in the network? static routing

Which are three common troubleshooting approaches? (Choose three.) elimination divide and conquer testing top down bottom up compilation

Which are three common troubleshooting approaches? (Choose three.) divide and conquer top down bottom up

Which combinations of keywords on the channel-group interface subcommand on two neighboring switches will cause the switches to use LACP and attempt to add the link to the EtherChannel? (Choose Two) desirable and active passive and active active and auto active and active

Which command allows you to verify speed settings on the switch port FastEthernet 0/1? show interfaces fa0/1 show speed fa0/1 show speed settings fa0/1 show speed port fa0/1

Which command allows you to verify speed settings on the switch port FastEthernet 0/1? show interfaces fa0/1

Which command displays the MAC address of the interface? * show interfaces * show running-config * show ip interface * show ip interface brief

Which command displays the MAC address of the interface? show interfaces

Which command do you use to display the ARP table on Microsoft Windows? * show arp table * show arp * show ip arp * arp -a

Which command do you use to display the ARP table on Microsoft Windows? arp -a

Which command enables 802.1Q encapsulation trunking on a router's Ethernet subinterface Ethernet 0/0.20? interface e0/0.20 encapsulation 20 dot1q interface e0/0.20 encapsulation dot1q 20 interface e0/0.20 encapsulation vlan 20 8021q interface e0/0.20 encapsulation vlan 20 dot1q

Which command enables 802.1Q encapsulation trunking on a router's Ethernet subinterface Ethernet 0/0.20? interface e0/0.20 encapsulation dot1q 20

Which command verifies end-to-end transport layer connectivity for HTTP from a PC over an IPv6 path? * ping IPv6_address 80 * telnet IPv4_address 80 * telnet IPv6_address 80 * tracert IPv6_address

Which command verifies end-to-end transport layer connectivity for HTTP from a PC over an IPv6 path? telnet IPv6_address 80

Which command will display the interface traffic statistics for average input rate? * show version * show interfaces * show running-config * show ip interface brief

Which command will display the interface traffic statistics for average input rate? show interfaces

Which command will display the switch uptime information? * show version * show interfaces * show running-config * show ip interface brief

Which command will display the switch uptime information? show version

Which command would you use to enable LLDP globally on a router? * lldp transmit * lldp run * lldp receive * cdp run * cdp enable

Which command would you use to enable LLDP globally on a router? lldp run

Which configuration will actually form an EtherChannel Link? Switch A: Auto, Switch B: Auto Switch A: Desirable, Switch B: Active Switch A: On, Switch B: On Switch A: Passive, Switch B: On

Which configuration will actually form an EtherChannel Link? Switch A: On, Switch B: On

Which device in a centralized wireless solution associates the SSID with a VLAN? AP WLC access switch wireless client

Which device in a centralized wireless solution associates the SSID with a VLAN? WLC

Which feature of PVST+ is not available in RSTP? fast convergence on topology changes per-port STP per-VLAN STP instance edge ports

Which feature of PVST+ is not available in RSTP? per-VLAN STP instance

Which field determines the type of information that follows the basic IPv6 header? * Flow Label * Next Header * Traffic Class * Payload Length:

Which field determines the type of information that follows the basic IPv6 header? Next Header

Which four interface characteristics must match for a link to be included into EtherChannel? (Choose four.) interface type switchport mode interface speed VLAN STP role hostname interface descriptions

Which four interface characteristics must match for a link to be included into EtherChannel? (Choose four.) interface type switchport mode interface speed VLAN

Which information will the switch read from the frame header and compare it to the list of addresses in the MAC table in order to forward a frame? * destination MAC address * source MAC address * destination IP address * source IP address

Which information will the switch read from the frame header and compare it to the list of addresses in the MAC table in order to forward a frame? destination MAC address

Which issue is eliminated when using PortFast? Bandwidth throttling DHCP timeout Duplex mismatch Native VLAN match

Which issue is eliminated when using PortFast? DHCP timeout

Which network characteristic indicates the general expense to purchase, install, and maintain network components? * bandwidth * security * cost * availability

Which network characteristic indicates the general expense to purchase, install, and maintain network components? cost

Which of these examples configures a default static route? * ip route 0.0.0.0 0.0.0.0 172.16.2.2 * ip route 0.0.0.0/0 172.16.2.2 * ip route 0.0.0.0 255.255.255.255 172.16.2.2 * default route 0.0.0.0 0.0.0.0 172.16.2.2

Which of these examples configures a default static route? ip route 0.0.0.0 0.0.0.0 172.16.2.2

Which of these is a disadvantage of static routing? * scalability * security * simplicity * conserving router resources

Which of these is a disadvantage of static routing? scalability

Which of these is an STP port state but not an RSTP port state? forwarding learning listening discarding

Which of these is an STP port state but not an RSTP port state? listening

Which option correctly describes the "on" mode regarding EtherChannel? The EtherChannel will form only if the other side is set to on. The EtherChannel will form if the other side is set to active. If the other side is set to negotiate parameters through PAgP, EtherChannel will not form, because PAgP is a proprietary protocol. If the other side is set to negotiate parameters through LACP, EtherChannel will form, because negotiations with standard protocol will be successful. The Etherchannel will be successful if the other side is set to passive.

Which option correctly describes the "on" mode regarding EtherChannel? The EtherChannel will form only if the other side is set to on.

Which option correctly describes the Etherchannel mode of "on"? (see pic for options)

Which option correctly describes the Etherchannel mode of "on"? The EtherChannel will be successful only if the other side is set to "on"

Which option describes LACP? (See Pic for options)

Which option describes LACP? (See Pic for options) Part of an IEEE specification (802.3ad) that allows several physical ports to be bundled to form a single logical channel.

Which option does the show ip interface brief command display? * The packets that are flowing in and out of the interface. * The IPv4 address and subnet mask of a local interface. * Brief details about an interface that is administratively down only. * A list of local interfaces and the IPv4 address and status of each interface.

Which option does the show ip interface brief command display? A list of local interfaces and the IPv4 address and status of each interface.

Which option happens first when a switch is powered on? * Cisco IOS is booted up. * Linux is booted up. * POST begins. * Command line appears.

Which option happens first when a switch is powered on? POST begins.

Which option identifies the STP bridge priority range? 0 to 65535 0 to 32768 1 to 65535 1 to 32768

Which option identifies the STP bridge priority range? 0 to 65535

Which option indicates errors, such as collisions, during the transmission of a frame? input queue drops output queue drops input errors output errors

Which option indicates errors, such as collisions, during the transmission of a frame? output errors

Which option involves only a single connection between a router and a switch for the purpose of inter-VLAN routing? * router with a separate interface in each VLAN * Layer 3 switch * router on a stick * multilayer switch

Which option involves only a single connection between a router and a switch for the purpose of inter-VLAN routing? router on a stick

Which option is a Layer 2 QoS marking? CoS DSCP EXP QoS group

Which option is a Layer 2 QoS marking? CoS

Which option is not a fiber-optic connector type? * threaded * bayonet * push-0 * RJ-45

Which option is not a fiber-optic connector type? RJ-45

Which option is the most scalable solution for inter-VLAN routing? * router with separate interfaces in each VLAN * Layer 3 switch * router on a stick * Layer 2 switch

Which option is the most scalable solution for inter-VLAN routing? Layer 3 switch

Which option represents the Cisco IOS Software command and the mode that is used to disable Cisco Discovery Protocol on a single interface? * router(config-if)# no cdp enable * router(config)# no cdp enable * router(config-if)# no cdp run * router(config)# no cdp run

Which option represents the Cisco IOS Software command and the mode that is used to disable Cisco Discovery Protocol on a single interface? router(config-if)# no cdp enable

Which protocol and port number are used by SSH? * TCP/port 22 * UDP/port 161 * TCP/port 25 * TCP/port 443

Which protocol and port number are used by SSH? TCP/port 22

Which range of addresses is included in the matching criteria 10.220.56.0 0.0.7.255? 10.220.56.0 to 10.255.255.255 10.220.56.0 to 10.220.67.255 10.220.56.0 to 10.220.56.255 10.220.56.0 to 10.220.63.255

Which range of addresses is included in the matching criteria 10.220.56.0 0.0.7.255? 10.220.56.0 to 10.220.63.255

Which risk is posed by operating a switched network with redundant paths? Layer 2 loops CRC errors late collisions interface input errors

Which risk is posed by operating a switched network with redundant paths? Layer 2 loops

Which statement about ACLs is true? - An ACL must have at least one permit action, or else it blocks all traffic. - ACLs process statements from the bottom up looking for a match. - An ACL has an implicit permit at the end. - ACLs will check the packet against all entries looking for the best match.

Which statement about ACLs is true? An ACL must have at least one permit action, or else it blocks all traffic.

Which statement about the HSRP version 1 hello packets is true? HSRP hello packets are sent to multicast address 224.0.0.2 on UDP port 1985. HSRP hello packets are sent to multicast address 224.0.0.5 on UDP port 1985. HSRP hello packets are sent to multicast address 224.0.0.1 on TCP port 1985. HSRP hello packets are sent to multicast address 224.0.0.10 on UDP port 1986.

Which statement about the HSRP version 1 hello packets is true? HSRP hello packets are sent to multicast address 224.0.0.2 on UDP port 1985.

Which statement correctly describes NAT? NAT is only performed for outbound traffic—traffic leaving an enterprise network to the internet. NAT is performed between differently addressed enterprise network segments, when network segments use private addressing. NAT is performed for outbound and inbound traffic. NAT is only performed in home networks. Enterprise networks have dedicated public IPv4 addresses.

Which statement correctly describes NAT? NAT is performed for outbound and inbound traffic.

Refer to the picture: The Administrator has configured Hot Standby Router Protocol (HSRP) to provide default gateway redundancy. Which statement correctly describes the behavior of the network? PC1 will be able to reach remote networks if either R1 or R2 fail. PC1 will be able to reach remote networks while R1 is operational. PC1 will not be able to reach remote networks if either R1 or R2 fail. PC1 will not be able to reach remote networks if R2 fails

Which statement correctly describes the behavior of the network? PC1 will be able to reach remote networks while R1 is operational.

Which statement describes a router-on-a-stick configuration correctly? * Router on a stick is a term used to describe a router and switch connected using one port configured as a stick interface. * Router on a stick is a type of router configuration in which a single physical interface routes the traffic among a single VLAN on a network. * Router on a stick is a type of router configuration in which a single physical interface routes the traffic among multiple VLANs on a network. * Router on a stick is a term frequently used to describe a setup up that consists of a router and 3 switches that are connected using 3 Ethernet links.

Which statement describes a router-on-a-stick configuration correctly? Router on a stick is a type of router configuration in which a single physical interface routes the traffic among multiple VLANs on a network.

Which statement is correct about the EUI-64 address format of the interface ID for stateless autoconfiguration that is used by Cisco? * It is the MAC address plus the Site-Level Aggregator. * It is the MAC address plus the ISO OUI. * It expands the 48-bit MAC address to 64 bits by inserting FFFE into the middle 16 bits and then inverting the 7th bit in the first octet. * It does not follow IEEE standards for uniqueness of the address. * It is only used by Cisco.

Which statement is correct about the EUI-64 address format of the interface ID for stateless autoconfiguration that is used by Cisco? It expands the 48-bit MAC address to 64 bits by inserting FFFE into the middle 16 bits and then inverting the 7th bit in the first octet.

Which statement is true about the Layer 3 EtherChannel? A Layer 3 port channel interface behaves like a port on a router. Layer 3 EtherChannel is established between Layer 2 and Layer 3 switches. Layer 3 EtherChannel can have Layer 2 member interfaces. Layer 3 EtherChannel is only used on the links towards service providers. On Layer 3 EtherChannel, you should disable Spanning Tree Protocol.

Which statement is true about the Layer 3 EtherChannel? A Layer 3 port channel interface behaves like a port on a router.

Which switch would win election as the root, assuming that the switches with these MAC addresses and priorities were in the same network? MAC address 0200.1111.1111, priority 32768 MAC address 0200.2222.2222, priority 1 MAC address 0200.1111.1111, priority 0 MAC address 0200.2222.2222, priority 65535

Which switch would win election as the root, assuming that the switches with these MAC addresses and priorities were in the same network? MAC address 0200.1111.1111, priority 0

Which three IEEE 802.11 amendments specify 5-GHz frequency band for WiFi operation? (Choose three.) 802.11a 802.11b 802.11g 802.11n 802.11ac

Which three IEEE 802.11 amendments specify 5-GHz frequency band for WiFi operation? (Choose three.) 802.11a 802.11n 802.11ac

Which three channels in the 2.4-GHz band are nonoverlapping? 1, 2, 3 1, 6, 11 1, 6, 10 40, 44, 48 Answer 1, 6, 11

Which three channels in the 2.4-GHz band are nonoverlapping? 1, 6, 11

Which three characteristics are full-duplex operation characteristics? (Choose three.) * unidirectional data flow * point-to-point only * legacy connectivity * attached to a dedicated switched port * collision may be an issue * requires full-duplex support on both ends

Which three characteristics are full-duplex operation characteristics? (Choose three.) point-to-point only attached to a dedicated switched port requires full-duplex support on both ends

Which three commands would enable you to enter extended ACL statements on a router? (Choose three.) Router(config)# access-list 101 Router(config)# access-list 1300 Router(config)# ip access-list extended 1300 Router(config)# ip access-list extended 101 Router(config)# ip access-list extended EXT_ACL

Which three commands would enable you to enter extended ACL statements on a router? (Choose three.) Router(config)# access-list 101 Router(config)# ip access-list extended 101 Router(config)# ip access-list extended EXT_ACL

Which three common applications use TCP? (Choose three.) SNMP web browsers email TFTP FTP VoIP

Which three common applications use TCP? (Choose three.) web browsers email FTP

Which three common applications use UDP? (Choose three.) * network printing * TFTP * database transactions * DNS * FTP * VoIP

Which three common applications use UDP? (Choose three.) TFTP DNS VoIP

Which three mechanisms are used to extend the lifetime and usefulness of IPv4? (Choose three.) * CIDR * VLSM * NAT * DNS * IPv5 * IPv6

Which three mechanisms are used to extend the lifetime and usefulness of IPv4? (Choose three.) CIDR VLSM NAT

Which three options are Layer 2 Ethernet characteristics? (Choose three.) * Ethernet uses MAC addresses. * Layer 2 addressing identifies end devices in the LAN. * Layer 2 enables the packet to be carried by the local media across each segment. * Ethernet uses IPv4 addresses. * Layer 2 identifies applications in the LAN.

Which three options are UDP benefits when compared to TCP? (Choose three.) * higher performance * lower-overhead data communications between hosts * higher-overhead data communications between hosts * lower-latency data transmission * higher-latency data transmission

Which three options are UDP benefits when compared to TCP? (Choose three.) higher performance lower-overhead data communications between hosts lower-latency data transmission

Which three options are advantages of NAT? (Choose three.) Provides consistency for internal network addressing schemes. End-to-end functionality is lost. End-to-end IPv4 traceability is lost. Tunneling becomes more complicated. Increases the flexibility of connections to the public network. Conserves public addresses Disrupts TCP connections initiated from the outside.

Which three options are advantages of NAT? (Choose three.) Provides consistency for internal network addressing schemes. Increases the flexibility of connections to the public network. Conserves public addresses

Which three options represent information inside an OSPF hello packet that must be agreed upon before neighbor adjacency can be established? (Choose three.) * hello and dead interval * area ID * authentication data * neighbors * router priority * DR and BDR IPv4 addresses

Which three options represent information inside an OSPF hello packet that must be agreed upon before neighbor adjacency can be established? (Choose three.) hello and dead interval area ID authentication data

Which three statements about a default gateway are true? (Choose three.) * The default gateway and the host IPv4 addresses have the same network and subnet portions. * The default gateway serves to deliver packets within a local network. * You normally configure the default gateway as an address on a Layer 3 switch interface. * You normally configure the default gateway as an address on a Layer 2 switch interface. * You normally configure the default gateway as an address on a router.

Which three statements about a default gateway are true? (Choose three.) *The default gateway and the host IPv4 addresses have the same network and subnet portions *You normally configure the default gateway as an address on a Layer 3 switch interface *You normally configure the default gateway as an address on a router. The host and its default gateway are on the same network, so share the same network portion of the IP address. The default gateway serves to send packets out of the local network, not inside the local network. When routing packets between different networks, you configure the default gateway on a device with routing capabilities such as an L3 switch or a router.

Which three steps need to be taken to identify network traffic? (Choose three.) Network audit Business audit Understand service levels Define mission critical class Choose congestion avoidance technique Choose congestion management technique

Which three steps need to be taken to identify network traffic? (Choose three.) Network audit Business audit Understand service levels

Which troubleshooting step would you take if you wanted to check the IPv4 stack on your own device? * Ping the loopback address. * Ping the local host. * Ping the default gateway. * Ping the remote server.

Which troubleshooting step would you take if you wanted to check the IPv4 stack on your own device? Ping the loopback address.

Which troubleshooting step would you take if you wanted to check the connectivity to the local network? Ping the loopback address. Ping the local host. Ping the default gateway. Ping the remote server.

Which troubleshooting step would you take if you wanted to check the connectivity to the local network? Ping the default gateway.

Which two ICMPv6 types are used for testing IPv6 reachability? (Choose two.) * ICMPv6 type 1 * ICMPv6 type 128 * ICMPv6 type 129 * ICMPv6 type 135 * ICMPv6 type 136

Which two ICMPv6 types are used for testing IPv6 reachability? (Choose two.) ICMPv6 type 128 ICMPv6 type 129

Which two characteristics describe HTTP? (Choose two.) * HTTP is a stateless protocol. * HTTP uses peer-to-peer model of communication. * HTTP is using only UDP protocol. * HTTP is a stateful protocol. * HTTP works on Application layer.

Which two characteristics describe HTTP? (Choose two.) HTTP is a stateless protocol. HTTP works on Application layer.

Which two data structures do the link-state routing protocols use? (Choose two.) LSU database neighbors database link-state interfaces database topology database next-hop database

Which two data structures do the link-state routing protocols use? (Choose two.) neighbors database topology database

Which two features does ARP provide? (Choose two.) * mapping IPv4 addresses to applications on a network * mapping IPv4 addresses to MAC addresses on a network * locally storing DLCIs that are learned via ARP * mapping MAC addresses to DLCIs on a network * locally storing MAC addresses that are learned via ARP

Which two features does ARP provide? (Choose two.) * mapping IPv4 addresses to MAC addresses on a network * locally storing MAC addresses that are learned via ARP

Which two numbers could you use in the numbered configuration method, or a number as a name in the named configuration method, to configure standard IPv4 access lists? (Choose two.) 150 100 305 2000 2300 75 1305

Which two numbers could you use in the numbered configuration method, or a number as a name in the named configuration method, to configure standard IPv4 access lists? (Choose two.) 75 1305

Which two of these options explain how a router learns destination networks? (Choose two.) * An administrator can enter routing information manually. * It learns from the desktop. * The router runs the dynamic routing process to learn prefixes from neighbor routers. * From any other devices that are not routable. * It learns from the servers.

Which two of these options explain how a router learns destination networks? (Choose two.) *An administrator can enter routing information *The router runs the dynamic routing process to learn prefixes from neighbor routers.

Which two of these statements apply to dynamic routing protocols? (Choose two.) * Routers learn new networks by exchanging routing updates. * Dynamic routing protocols are unable to make changes to the routing table. * Unlike static routing, dynamic routing enables routers to select paths for non real-time network changes. * Dynamic routing protocols install a default route in the routing table to discover the neighbor. * Dynamic routing protocols automatically adjust routes when the topology or traffic changes. * Dynamic routing protocols keep the routes permanently (like static), even though there are changes in network.

Which two of these statements apply to dynamic routing protocols? (Choose two.) *Routers learn new networks by exchanging routing updates. *Dynamic routing protocols automatically adjust routes when the topology or traffic changes.

Which two options represent when the OSPF routing protocol sends LSAs?? (Choose two.) * periodically every 30 minutes * on topology change * periodically every 30 seconds * periodically every 60 minutes * periodically every 60 seconds

Which two options represent when the OSPF routing protocol sends LSAs?? (Choose two.) periodically every 30 minutes on topology change

Which two protocol choices do you have when you are implementing an EtherChannel Bundle? (Choose two) PAgP PAgD LACP LAPD

Which two protocol choices do you have when you are implementing an EtherChannel Bundle? (Choose two) PAgP LACP

Which two protocols does the distribution layer use to provide default gateway redundancy ? (Choose two) Device Control Protocol (DCP) Distribution Network Protocol (DNP3) Dynamic Source Routing Protocol (DSR) First Hop Redundancy Protocol (FHRP) Hot Standby Router Protocol (HSRP)

Which two protocols does the distribution layer use to provide default gateway redundancy ? (Choose two) First Hop Redundancy Protocol (FHRP) Hot Standby Router Protocol (HSRP)

Which two statements correctly describe port forwarding? (Choose two.) • Port forwarding is defined as a static mapping. • Port forwarding enables devices in the private network to reach critical services in external networks. • Port forwarding enables local resource in private network to be available to external networks. • Port forwarding changes only port numbers and is a mechanism that forces applications to use arbitrarily chosen port numbers. • Port forwarding is dynamic translation mechanism that enables multiple hosts from external networks to access the same resource in the private network.

Which two statements correctly describe port forwarding? (Choose two.) - Port forwarding is defined as a static mapping. - Port forwarding enables local resource in private network to be available to external networks.

Which two statements regarding ARP are true? (Choose two.) * A device can use ARP to assign the MAC addresses to dynamic NICs. * ARP entries are permanent. * ARP entries are not permanent. * A device can use ARP to assign an IPv4 address to the requester. * Devices can exchange entire ARP tables. * ARP tables are created and maintained dynamically.

Which two statements regarding ARP are true? (Choose two.) ARP entries are not permanent. ARP tables are created and maintained dynamically.

Which type of traffic is smooth and predictable? voice video data management

Which type of traffic is smooth and predictable? voice

Which verification method would you typically use to verify that you have a bad cable? top-down method bottom-up method follow-the-path method divide-and-conquer method swap-components method

Which verification method would you typically use to verify that you have a bad cable? swap-components method

Which wireless solution is used for branch and remote office deployments and eliminates the need for a WLC on each location? AP in FlexConnect mode AP in Local mode standalone AP WLC in FlexConnect mode

Which wireless solution is used for branch and remote office deployments and eliminates the need for a WLC on each location? AP in FlexConnect mode

Which wireless technology provides host connectivity within a large geographic area, such as a city or a suburb? WPAN WLAN IEEE 802.11 WMAN

Which wireless technology provides host connectivity within a large geographic area, such as a city or a suburb? WMAN

You are given a physical network diagram. Which two statements about the logical diagram for the same network are true? (Choose two.) * The logical diagram is obvious from the physical diagram. * The logical diagram can be drawn by adding device model information to the physical diagram. * The logical diagram can be drawn by examining device configurations. * The logical diagram can be drawn by analyzing data flows in the network. * The logical diagram is always different to the physical diagram.

You are given a physical network diagram. Which two statements about the logical diagram for the same network are true? (Choose two.) *The logical diagram can be drawn by examining device configurations. *The logical diagram can be drawn by analyzing data flows in the network.

You configured an important host in your company with a static default gateway pointing to one of the routers in the network. You also have a second router that can provide connectivity to other subnets. What will happen when the primary router fails and there is only a dynamic routing protocol configured between the routers? The host will automatically discover the failure and update its default gateway with the IP address of the second router. The second router will use the dynamic routing protocol to instruct the host to change its default gateway with its IP address. The host should have DHCP provide the default gateway, so the DHCP server can dynamically update the gateway after the failure. The host will lose connection to other subnets, since it cannot dynamically update the default gateway.

You have been assigned a /24 network address. A coworker has requested that you create 10 subnets that can support 10 hosts per network. Which subnet mask should you use? * 255.255.255.0 * 255.255.255.224 * 255.255.255.240 * 255.255.255.248

You have been assigned a /24 network address. A coworker has requested that you create 10 subnets that can support 10 hosts per network. Which subnet mask should you use? 255.255.255.240

You have been assigned a task to configure two routers as part of an HSRP group. Since you have not configured priority on the routers, which statement is correct? Both routers will be in ACTIVE state. Both routers will be in STANDBY state. Both routers will be in LISTEN state. One router will be in ACTIVE and the other in STANDBY state.

You have been assigned a task to configure two routers as part of an HSRP group. Since you have not configured priority on the routers, which statement is correct? One router will be in ACTIVE and the other in STANDBY state.

You have been assigned the network 172.16.0.0/16. You need to establish 13 subnets. What is the new subnet mask in the decimal form? * 255.255.240.0 * 255.255.248.0 * 255.255.224.0 * 255.255.252.0

You have been assigned the network 172.16.0.0/16. You need to establish 13 subnets. What is the new subnet mask in the decimal form? 255.255.240.0

You have configured two Layer 3 switches with HSRP to provide default gateway redundancy to hosts in VLAN 10 using HSRP version 1 and group 10. What is the virtual MAC address associated with the virtual router if the configured virtual IPv4 address is 10.1.1.1? 1001.0001.001 1001.0c07.ac01 0000.0c07.ac10 0000.0c07.ac0a

You have connected your PC through a console cable to a new Cisco switch and you plan to use HyperTerminal to perform initial configuration. Which HyperTerminal configuration setting should you use for the connection to the Cisco switch? * Speed: 9600 bps, data bits: 8, parity: Even, stop bit: 1, and flow control: Hardware * Speed: 9600 bps, data bits: 8, parity: None, stop bit: 1, and flow control: None * Speed: 115200 bps, data bits: 8, parity: None, stop bit: 1, and flow control: Hardware * Speed: 115200 bps, data bits: 8, parity: None, stop bit: 1, and flow control: None

You have just configured two EtherChannels between two switches. Each EtherChannel contains 3 physical links. Which option describes how Layer 2 STP will react? It will block one physical link within one of the EtherChannels. It will block one entire EtherChannel. It will block one physical link within each EtherChannel. It will not block any links.

You have just configured two EtherChannels between two switches. Each EtherChannel contains 3 physical links. Which option describes how Layer 2 STP will react? It will block one entire EtherChannel.

You have subnetted your 192.168.36.0 network address with a 255.255.255.224 mask. How many subnets are available? * 16 * 8 * 10 * 32

You have subnetted your 192.168.36.0 network address with a 255.255.255.224 mask. How many subnets are available? 8

Your boss has asked you to analyze the network traffic of your company. Which two types of traffic are considered delay-sensitive? (Choose two.) • email • interactive database application • DNS • live streaming video • peer-to-peer file sharing

Your boss has asked you to analyze the network traffic of your company. Which two types of traffic are considered delay-sensitive? (Choose two.) - interactive database application - live streaming video

(Matching Question) Match the correct description about the line and protocol status with the appropriate condition. Interface is in shutdown condition Interface is in no shutdown condition but cable is not connected to the Ethernet interface Cable is connected to the interface and placed in no shutdown condition but encapsulation mismatch is encountered on the link Interface is functioning well with no issues. Ethernet0/0 is administratively down and line protocol is down Ethernet0/0 is down and line protocol is down Serial0/0/0 is up and line protocol is down Serial0/0/0 is up and line protocol is up. ____________________________________________________________________________ Answer: Interface is in shutdown condition Ethernet0/0 is administratively down and line protocol is down Interface is in no shutdown condition but cable is not connected to the Ethernet interface Ethernet0/0 is down and line protocol is down Cable is connected to the interface and placed in no shutdown condition but encapsulation mismatch is encountered on the link Serial0/0/0 is up and line protocol is down Interface is functioning well with no issues. Serial0/0/0 is up and line protocol is up.

A Cisco Catalyst switch needs to send frames over a layer 2 Etherchannel. Which answer best describes how the switch balances the traffic over the four active links in the channel? (see pic)

A Cisco Catalyst switch needs to send frames over a layer 2 Etherchannel. Which answer best describes how the switch balances the traffic over the four active links in the channel? sends the entire frame over one link, choosing the link by applying some math to fields in each frame's headers.

A NAT-enabled router is configured to perform inside PAT. The IPv4 packet arrives at the outside interface of the router, as a response to the client in the inside network. Provided that inside PAT is correctly configured, which fields in the received Ipv4 packets must match to which NAT mapping element, for the packet to be forwarded to the inside host? • Destination Ipv4 address and destination port number must match outside global address and port in the mapping table. • Source Ipv4 address and source port number must match inside global address and port number in the mapping table. • Source Ipv4 address and source port number must match inside local address and port number in the mapping table. • Destination IPv4 address and destination port number must match inside global address and port in the mapping table.

An administrator is configuring EtherChannel on switch SW3. She is starting the configuration by shutting down a range of interfaces, as shown below. Why is she doing so? The interfaces must be shut down when they are bundled into EtherChannel. The interfaces must be shut down to change their speed and duplex. The shutdown interfaces do not create activity on the link, so incomplete configuration will not produce undesired results. The interfaces that are not part of the EtherChannel must be shut down.

An administrator is configuring EtherChannel on switch SW3. She is starting the configuration by shutting down a range of interfaces, as shown below. Why is she doing so? The shutdown interfaces do not create activity on the link, so incomplete configuration will not produce undesired results.

An administrator is troubleshooting an EtherChannel link. Which two commands will provide EtherChannel bundled link information and status of each bundled link? (Choose two.) show etherchannel port-channel show etherchannel summary show interface Port-channel show interfaces status show spanning-tree

An engineer configures a switch to put interfaces G0/1 and G0/2 into the same layer ether channel. Which of the following terms is used in the configuration commands? Etherchannel PortChannel Ethernet-Channel Channel-Group

An engineer configures a switch to put interfaces G0/1 and G0/2 into the same layer ether channel. Which of the following terms is used in the configuration commands? Channel-Group

Assume that you are the sole network engineer in your company. You have received a new ticket saying that there is a new employee on 3rd floor; her PC is connected to a switch interface. You have connected to the switch on the floor and entered the interface configuration mode of the connected port to the PC. Once you have configured the interface to access mode, which command should you use to assign the interface to a data VLAN? * switchport vlan vlan-id * switchport access vlan vlan-id * switchport mode access vlan vlan-id * switchport mode access vlan-id

Assume that you are the sole network engineer in your company. You have received a new ticket saying that there is a new employee on 3rd floor; her PC is connected to a switch interface. You have connected to the switch on the floor and entered the interface configuration mode of the connected port to the PC. Once you have configured the interface to access mode, which command should you use to assign the interface to a data VLAN? switchport access vlan vlan-id. When you connect host to a switch port, you should associate it with a VLAN. In the interface configuration mode you should set the interface to an access mode, and then put the access port in VLAN using the switchport access vlan vlan-id command. The other commands are invalid commands.

Assume that you have an autonomous AP that is connected to a switch. Based upon the following configuration, which statement correctly describes the implementation? switch# configure terminal switch(config)# interface GigabitEthernet1/0/3 switch(config-if)# description AP2 switch(config-if)# switchport mode trunk switch(config-if)# switchport trunk native vlan 12 switch(config-if)# switchport trunk allowed vlan 12,14 - VLAN 12 is client traffic. - VLAN 12 traffic has a VLAN tag. - VLAN 14 is for management traffic. - VLAN 14 is for client traffic.

Assume that you have been told to secure the trunk ports on a switch. Which two options are recommended as best practice? (Choose two.) * Change the native VLAN to something other than VLAN 1. * Make the native VLAN different on both ends. * Tag the native VLAN. * Enable DTP. * Make the native VLAN VLAN 1.

Assume that you have just created a VLAN 10 on a switch. Which command should you use to verify if the VLAN was created? * show virtual lan * show vlan id 100 * show vlan brief * show virtual lan id 10 * show interface Ethernet0/0 switchport

Assume that you have just created a VLAN 10 on a switch. Which command should you use to verify if the VLAN was created? show vlan brief

Assume that you have received a switch with no prior VLAN configuration. Regarding VLANs, which statement is true? * All interfaces belong to VLAN 1. * All interfaces are administratively down. * All interfaces do not belong to any VLAN. * The show vlan brief command shows no VLANs.

Assume that you have received a switch with no prior VLAN configuration. Regarding VLANs, which statement is true? All interfaces belong to VLAN 1. . VLAN 1 is the factory default VLAN. If you do not assign a VLAN to an access port, VLAN 1 is assigned automatically. The switch interfaces are in down state, unlike interfaces on a router, which are by default in administratively down state. The show vlan brief command shows VLANs 1, 1002-1005.

By borrowing three host bits, how many subnets are created? * 10 * 8 * 16 * 32

By borrowing three host bits, how many subnets are created? 8

By default, which VLAN or VLANs are permitted across a trunk link? * no VLANs * native VLAN * all VLANs * VLAN 0

By default, which VLAN or VLANs are permitted across a trunk link? all VLANs

Cisco switches do not have a power OFF/ON button. How would you power on the switch? * Press and hold the Mode button while plugging in the cable for the switch. * Connect the switch to the power source, and it will begin powering on. * Press and hold the Mode button for 5 seconds, and the switch will power on itself. * Connect the RPC connector to the switch, and it will begin powering on.

Cisco switches do not have a power OFF/ON button. How would you power on the switch? Connect the switch to the power source, and it will begin powering on.

Determine which class the IPv4 address 172.32.11.7 belongs to and whether it belongs to the range of the public or private IPv4 addresses. Which option represents the correct description? * public, Class A * private, Class A * public, Class B * private, Class B * public, Class C * private, Class C * public, Class D * private, Class D

Does a Layer 2 switch have a MAC address? * Yes, for remote access management * Yes, for frame forwarding * Yes, for packet routing * No

Does a Layer 2 switch have a MAC address? Yes, for remote access management Switches do not need assigned MAC addresses for frame forwarding. However, they need a MAC address when remote access management is configured.

Host A with an IPv4 address 192.168.99.15/24 wants to send several packets to several destination IPv4 addresses listed here. Which address requires the use of a default gateway? * 192.168.99.17/24 * 192.168.40.39/24 * 192.168.99.39/24 * 192.168.99.167/24

Host A with an IPv4 address 192.168.99.15/24 wants to send several packets to several destination IPv4 addresses listed here. Which address requires the use of a default gateway? 192.168.40.39/24

How do link-state protocols limit the scope of route changes? by supporting classless addressing by sending the mask along with the address by sending only updates of a topology change by segmenting the network into areas

How do link-state protocols limit the scope of route changes? by segmenting the network into areas

How does 802.1Q incorporate VLAN information into a frame? * It adds a 4-byte header and a 26-byte tag to the frame header. * It adds a 4-byte tag to the frame header. * It reroutes the frame through the VLAN interface, causing a different destination address. It reroutes the frame through the VLAN interface, causing a different source address.

How does 802.1Q incorporate VLAN information into a frame? It adds a 4-byte tag to the frame header

How is a static default route denoted in the routing table? * with the code "S" * with the code "D" * with the code "d" * with the code "C"

How is a static default route denoted in the routing table? with the code "S"

How many LEDs on each port of a Catalyst switch are used to show the status detail? * Two LEDs are used on each port. * Three LEDs are used on each port. * Ports on the Cisco Catalyst switch do not have LEDs. * Each port on a Catalyst switch has only one LED.

How many LEDs on each port of a Catalyst switch are used to show the status detail? Each port on a Catalyst switch has only one LED.

How many bits constitute the DSCP field of the IP header? 3 bits 4 bits 6 bits 8 bits

How many bits constitute the DSCP field of the IP header? 6 bits

How many hexadecimal numbers represent each MAC address? 8 6 12 20

How many hexadecimal numbers represent each MAC address? 12

How many host addresses can be used in a network with a /24 mask that has not been subnetted? * 253 * 254 * 255 * 256

How many host addresses can be used in a network with a /24 mask that has not been subnetted? 254

If a port is still a designated or root port at the end of the learning state which state will it enter Blocking Disabling Forwarding Learning Listening

If a port is still a designated or root port at the end of the learning state which state will it enter Forwarding

Imagine that you are the sole network engineer for your company. Suddenly, your users complain that the network is very slow. After further enquiry you found out that there are several users that consume a lot of bandwidth by using torrent/peer-to-peer applications. What are the two use cases that you could use QoS to solve this problem? (Choose two.) • The offending traffic can be throttled to minimal bandwidth. • The offending traffic can be given a higher priority. • All traffic could be treated as equal. • The offending traffic can be dropped. • The business important traffic can be given a lower priority.

Imagine that you are the sole network engineer for your company. Suddenly, your users complain that the network is very slow. After further enquiry you found out that there are several users that consume a lot of bandwidth by using torrent/peer-to-peer applications. What are the two use cases that you could use QoS to solve this problem? (Choose two.) - The offending traffic can be throttled to minimal bandwidth. - The offending traffic can be dropped.

In network design, can you include physical loops between switches? Yes, to provide redundancy. No, you should never include physical loops. Yes, to provide better scalability. No, you should first disable STP

In network design, can you include physical loops between switches? Yes, to provide redundancy.

In which mechanism can a device be configured with a private IPv4 address but communicate on the internet using a globally routable IPv4 address? * NAT * VLSM * ARP multihoming

In which mechanism can a device be configured with a private IPv4 address but communicate on the internet using a globally routable IPv4 address? NAT The correct answer is "NAT." NAT breaks the end-to-end model of IP. NAT introduced a model in which a device that is facing outward to the internet has a globally routable IPv4 address, while the internal network is configured with private addresses. These private addresses can never leave the site, so they can be identical in many different enterprise networks.

In which of these examples will you use static routes? * in a large network * when connecting to the public internet from your PC * when the network is expected to scale * in a small network

In which of these examples will you use static routes? in a small network

Match the UTP cable category with its description. Category 5 , 5e , 6a, 8 capable of transmitting data at speeds of up to 100 Mbps used in networks running at speeds of up to 1000 Mbps (1 Gbps) used in networks running at speeds of up to 10 Gbps used in networks running at speeds of up to 40 Gbps

Match the UTP cable category with its description. capable of transmitting data at speeds of up to 100 Mbps Category 5 used in networks running at speeds of up to 1000 Mbps (1 Gbps) Category 5e used in networks running at speeds of up to 10 Gbps Category 6a used in networks running at speeds of up to 40 Gbps Category 8

Match the network communication type with its description. Broadcast, unicast, multicast *communication in which a frame is sent from one host and addressed to one specific destination *communication in which a frame is sent from one host to a specific group of devices or clients *communication in which a frame is sent from one address to all other addresses

Match the network communication type with its description. Answer is below : communication in which a frame is sent from one host and addressed to one specific destination Unicast communication in which a frame is sent from one host to a specific group of devices or clients Multicast communication in which a frame is sent from one address to all other addresses Broadcast

On some simple Catalyst switches, the SYST LED will blink with which color when the switch POST process fails and Cisco IOS Software does not load? * RED * AMBER * GREEN * WHITE

On some simple Catalyst switches, the SYST LED will blink with which color when the switch POST process fails and Cisco IOS Software does not load? AMBER

On which of these tables do the routers rely to make decisions on forwarding packets at Layer 3? * MAC address table * Cisco Discovery Protocol table * routing table * ARP table

On which of these tables do the routers rely to make decisions on forwarding packets at Layer 3? routing table

Place the Ethernet II frame fields into the correct order from 1-6 Destination address Preamble Payload Source address FCS Type

Place the Ethernet II frame fields into the correct order. Destination address 2. Preamble 1. Payload 5. Source address 3. FCS 6. Type 4.

Regarding VLANs, which statement is true? · Each VLAN is usually associated with only one IPv4 subnet. · It is recommended to have multiple IPv4 subnets on the same VLAN. · Only native VLAN 1 can have multiple IPv4 subnets on the same VLAN. · There can be multiple IPv4 subnets on the extended VLAN range.

Regarding VLANs, which statement is true? Each VLAN is usually associated with only one IPv4 subnet.

Regarding trunk ports, which statement is true? * The show vlan command can be used to check trunk ports on a switch. * The native VLAN on a trunk port is tagged. * All VLANs are sent untagged on a trunk port. * By default, all VLANs are allowed on a trunk.

Regarding trunk ports, which statement is true? By default, all VLANs are allowed on a trunk. If you do not explicitly allow VLANs to traverse the trunk, all will be allowed to cross the link. By default the native VLAN is VLAN 1, and it is untagged by default. All the other VLANs that are traversing the trunk are tagged. If you use the show vlan command, you will not see any trunk ports in the output. In this case, it is better to use the show interfaces trunk command.

Related to static routes, which of these statements is correct? * Static routes stay the same from the time they are configured. * Static routes will not stay the same; they will change automatically if there are changes in the network. * Static routes will set default routes when there are changes in the network. Both static routes and dynamic route stay the same from the time they are configured.

Related to static routes, which of these statements is correct? Static routes stay the same from the time they are configured.

Services are provided to which entities in the DiffServ model? frames packets applications classes of traffic

Services are provided to which entities in the DiffServ model? classes of traffic

What is used by a router to determine where to forward data? * routing table * ARP table * MAC address table * OSPF database

What is used by a router to determine where to forward data? routing table

The ACL statement has the matching criteria specified as 192.168.122.128 0.0.0.63. Which two IPv4 addresses would match the criteria? (Choose two.) 192.168.0.195 192.168.122.195 192.68.120.190 192.168.122.140 192.168.122.63 192.168.122.191

The ACL statement has the matching criteria specified as 192.168.122.128 0.0.0.63. Which two IPv4 addresses would match the criteria? (Choose two.) 192.168.122.140 192.168.122.191

The SPF algorithm uses a value that on a Cisco router is inversely proportional to the bandwidth. What is this value called? * link cost * hop count * link state * MTU

The SPF algorithm uses a value that on a Cisco router is inversely proportional to the bandwidth. What is this value called? link cost

The administrator has configured an EtherChannel link between switches SW1 and SW2. His configuration is shown in the exhibit. However, the EtherChannel does not form. What is the likely reason for the issue? The configurations do not use the same channel-group number. The configurations do not form between the same interfaces—SW1 is bundling ports FastEthernet 0/1 and 0/2, while SW2 is bundling ports FastEthernet 0/4 and 0/5. Logical interfaces cannot be trunks. The trunk configuration on the switches is not consistent.

The administrator wants to allow only PC1 to have remote access to the file server, using SSH. Other devices from the 192.168.10.0/24 network should not be allowed SSH remote access, but other traffic should be permitted. Where would you place this access list for most efficient implementation? - router R1, interface Gi0/0 out - router R1, interface Gi0/1 in - router R1, interface Gi0/2 out - router R3, interface Gi0/0 in - router R2, interface Gi0/0 out - router R2, interface Gi0/1 out - router R3, interface Gi0/1 out

The network administrator is reviewing the ACL 15 configuration on a router. The figure shows the output of the show access-lists command, where the administrator notices that the deny statement 20 is typed with the wrong wildcard mask of 0.0.0.255. The administrator wants to change it to wildcard mask 0.0.255.255. Which sequence of commands should the administrator use to modify the ACL? - Router(config)# no access-list 15 20 deny 10.0.0.0 0.0.0.255 - Router(config)# no access-list 15 20 deny 10.0.0.0 0.0.0.255 - Router(config)# access-list 15 20 deny 10.0.0.0 0.0.255.255 - Router(config)# ip access-list standard 15 Router(config-std-nacl)# 20 deny 10.0.0.0 0.0.255.255 Router(config-std-nacl)# no 20 - Router(config)# ip access-list 15 Router(config)# 20 deny 10.0.0.0 0.0.255.255 - Router(config)# ip access-list standard 15 Router(config-std-nacl)# no 20 Router(config-std-nacl)# 20 deny 10.0.0.0 0.0.255.255

What are four benefits of IPv6 over IPv4? (Choose four.) * larger address space * smaller address space * complex header * simpler header * mobility * transition richness * TCP and UDP included in the basic header

What are four benefits of IPv6 over IPv4? (Choose four.) larger address space simpler header mobility transition richness

What are two PortFast characteristics? (Choose two.) configured on access ports connected to user device configured on trunk ports connected to another switch immediate transition to forwarding state if BPDU is received, it disables the port never used in a combination with BPDU guard

What are two PortFast characteristics? (Choose two.) - configured on access ports connected to user device - immediate transition to forwarding state

Which bit in the MAC address is referred as the U/L bit? * least significant bit in the first octet * most significant bit in the first octet * second least significant bit in the first octet * second least significant bit in the second octet

Which bit in the MAC address is referred as the U/L bit? second least significant bit in the first octet

Which subnet mask would limit the number of hosts on any given subnet to 2046? * 255.248.0.0 * 255.255.240.0 * 255.255.248.0 * 255.255.252.0

Which subnet mask would limit the number of hosts on any given subnet to 2046? 255.255.248.0

Which two ports must a firewall allow for CAPWAP operations? (Choose two.) UDP 5246 UDP 5247 UDP 5426 UDP 5470 UDP 5530

Which two ports must a firewall allow for CAPWAP operations? (Choose two.) UDP 5246 UDP 5247

Your boss asked you to secure the unused switch ports on a switch that resides on a 2nd floor. Which two options are recommended as best practice? (Choose two.) * Place unused ports into VLAN 1. * Administratively shut down the unused ports. * Create a black hole VLAN, and place unused ports into that VLAN. * Configure unused ports as trunk ports. * Place unused ports into a VLAN that has access to the internet.

Your boss asked you to secure the unused switch ports on a switch that resides on a 2nd floor. Which two options are recommended as best practice? (Choose two.) * Administratively shut down the unused ports. * Create a black hole VLAN, and place unused ports into that VLAN. A good security practice is to configure all the ports on all switches to be associated with VLANs other than VLAN 1. Also, all unused switch ports should be assigned to black hole VLAN and set to be administratively down. A black hole VLAN is a term for a VLAN, which has no route, or no default-gateway to other networks within your organization, or to the internet.

Which option will help you connect to a Cisco device through the console port? * console cable * serial cable * USB cable * RJ-45 cable

CCNA Questions

Conjuntos de estudio relacionados

ACC 331: Chapter 5

chpt 2 quiz act 212

Sociology Final

Mid Term Assessment

Medication Dosage Calculations

Communication - Evolve RN

Chapter 5 Federal Gov Questions

Chapter 1 HW Questions

Contemporary Social Probs Ch. 4

Chapter 5 Preventing Violence and Injury

cardiovascular (heart) semifinals exam

Chapter 36: Nutrition NCLEX

Parts of a Dictionary Word Entry

BUSA 1105 chapter 2

M15: Adolescence

IA2_Chapter 1

Environmental Policy and Human Population Lab

Modern Database Management - Self Check 06

quiz 1 Mid, Quiz 2, Quiz 3 Mid, quiz 4 mid, quiz 5 Mid, quiz 6 Mid

Business Law Chapter 5