CDC 1S051

¡Supera tus tareas y exámenes ahora con Quizwiz!

Many employers are required to keep a record of serious work-related injuries and illnesses when they have more than how many employees?

10

The office of primary responsibility (OPR) for a hazard report.must return the report to the Safety office with action annotated within how many workdays?

10

The job safety training outline (JSTO) comnsists of how many mandatory items?

14

To limit the attractiveness to wildlife, the grass in aircraft movement areas must not be more than

14 inches

The formal written inspection report must be sent to the squadron or unit commander within how many days after the inspection is complete?

15

A supplier may NOT end or reduce support without giving the receiver written notice within

180 calendar days

The timeframe for air Reserve Component (ARC) primary and alternate unit safety representatives (USR) to complete initial training is within how many unit training assemblies of appointment?

2

At a minimum, program assessments at wing level and below are conducted every how many months?

24

The safety assessment for geographically separated units (GSU) is conducted every how many months NOT to exceed...

3 years

The Occupational Safety and Health Administration (OSHA) Form 300A must be posted in a conspicuous place and remain in place until

30 April

The Headquarters Air Force Safety Center (AFSEC) will conduct safety evaluations of major command (MAJCOM) Headquarters staffs at intervals NOT to exceed how many months?

36

How many risk assessment code (RAC) descriptions are used in the RAC matrix process?

5

How many steps are in the risk management process?

5

Military personnel must complete refresher motorcycle training every

5 years

The maximum number of days the chief of safety (COS) may extend out follow-up of hazards or deficiencies is

90

Within how many days of assignment as chief of safety must active duty members complete the Chief of Safety Course?

90

Which forms may be used to post notices of hazards in a workplace?

AF Form 979, Danger Tag, and AF Form 1118, Notice of Hazard.

Who normally has greater expertise and should be given the opportunity to develop the optimal solution for a problem?

Action agency

Promises of confidentiality are NOT allowed for which mishaps?

Afloat, motor vehicle, and ground and industrial

Which system is used to transmit the majority of mishap reports?

Air Force Safety Automated System (AFSAS)

What agency prepares the Memorandum of Final Evaluation for on-duty Class A and B formal ground mishap reports?

Air Force Safety Center (AFSEC)

A mishap that involves intent for flight and no reportable damage to the Department of Defense (DOD) aircraft, but involves a fatality, reportable injury, or reportable property damage is categorized as which aviation mishap?

Aircraft Flight-Related

Which safety discipline is responsible for developing the mishap response plan?

All safety disciplines

Which organization oversees the creation, promulgation and use of thousands of norms and guidelines that directly impact businesses in nearly every sector?

American National Standards Institute (ANSI)

What are safety personnel responsible for coordinating on or updating to approve use of new hazardous materials?

Authorized Users List

What safety disciplines are covered by the Air Force Safety Management System?

Aviation, occupational, weapons, systems, and space safety.

What document describes the safest and most efficient way to use primary and secondary roads on an installation?

Base traffic circulation plan

To ensure Air Force personnel comply with directive publications, what statement is provided the publication?

COMPLIANCE WITH THIS PUBLICATION IS MANDATORY

Who evaluates a hazard report to determine if it is a valid hazard?

Chief of Safety

Who does the weapons safety manager (WSM) assist in determining the explosives clear zones required on appropriate base maps?

Civil Engineer

Who must be notified when a civilian is involved in a mishap?

Civilian Personnel Office

A single investigation officer (SIO) normally investigates what types of mishaps?

Class C, D, and E

When a board is appointed to investigate a Class A on-duty mishap, the president must be at least

Colonel or GS-15

Who must notify the Wing Safety Office of mishaps as soon as possible?

Commanders, functional managers, and supervisors

Which is NOT an Air Force Inspection System (AFIS) inspection?

Compliance unit.

Which step in the budget process consists of validating training that is required to meet mission demands?

Conducting training needs assessment

Who has authority over a contract?

Contracting Officer

Who is responsible for reminding the contractor of the contractual obligation to comply with all pertinent regulations?

Contracting Officer

Which form documents the support a supplier provides a receiver, and the reimbursement the receiver pays for that support?

DD Form 1144, Support Agreement

Which agency or office performs the pre-award survey?

Defense Contract Management Agency

What is the highest review level in the appeal process for hazard reports that originate from installations in foreign countries?

Deputy Under Secretary of Defense for Environmental Security

Despite the high up-front costs, what is the most preferable solution to eliminate a hazard?

Design fixes

Which action is a written authorization that allows a specific departure from a mandatory requirement for other than quantity-distance (QD) criteria?

Deviation

Which course is a 1 hour driver rehabilitation course intended to educate personnel on safe driving?

Driver Improvement and Rehabilitation Course

Which organization is chartered by the Secretary of Labor and authorized under federal regulation?

Field Federal Safety and Health Council (FFSHC)

What are mishap findings NOT based on?

First impressions

Which of the following is NOT an element of an Informed Culture?

Focused culture

Who determines hazard abatement control measures?

Functional manager or supervisor with technical assistance from safety, fire, and health officials

Which of the following is NOT an authorized civilian safety specialty code?

GS-0018, Occupational Safety Apprentice

Which of the following is a horizontal standard?

General Industry

Which agency can approve the release of privileged information outside the Air Force?

Headquarters (HQ) United States Air Force/Safety (USAF/SE)

The cross-feed of human error data using a common human error categorization system that involves human factors taxonomy describes what system?

Human Factors Analysis and Classification

What investigation tool provides a multidimensional approach to error analysis?

Human factors

What must Occupational Safety and Health Administration (OSHA) representatives present before conducting an inspection of a workplace on an Air Force installation?

Identifying credentials

Who has the primary responsibility for identifying workplace hazards that place workers at risk?

Individual

If required, provide photographic or video support; however, videos or photographs taken on installations fall under the exclusive control of the

Installation Commander

Who is responsible for reviewing and digitally signing the annual Occupational Safety and Health Administration (OSHA) Form 300 Log?

Installation Commander

Who may authorized the routine use of government vehicle others (GVO) in traffic, industrial, or pedestrian environments?

Installation Commander

Who regulates the movement of traffic and personnel on an Air Force installation?

Installation Commander

Which motorcycle training should be provided within 60 days of request and completed no more than 1 year after completion of initial training?

Intermediate course

Which safety assurance measure's goal is to improve the wing's safety program by decreasing frequency and/or severity of mishaps?

Leadership review

Who approves all safety manpower requests or changes before they are submitted to the local management engineering team?

MAJCOM Safety

Which organization develops national consensus standards designed to eliminate death, injury, property, and economic loss due to fire, electrical, and related hazards?

National Fire Protection Association (NFPA)

The National Security Act of 1947 created the Department of Defense and the

National Safety Council

If witnesses provide statements (written or verbal), it must be recorded on what document?

Non-privileged Witness Statement

Which of the following is not an installation level council?

Occupational Safety Corporate Committee (OSCC)

Which risk assessment codes (RAC) are required to be included on the Air Force Form 3

Only RAC 1, 2 and 3

Which is NOT an essential element of a mishap investigation?

Opinions

Which non-directive publication is informational and recommends procedures or suggests how to implement Air Force guidance?

Pamphlets

Which four pillars does the Air Force Safety Management System use?

Policy and Leadership; RM; Assurance; Promotion and Education

Which hazard abatement measure recommends using protective equipment as a last resort?

Procedural actions

Which process of risk management is helpful in choosing an appropriate course of action when an unplanned event occurs during execution of a planned operation?

Real-time

When mishap reports are no longer needed, dispose of them in accordance with Air Force

Records and Distribution Schedule

Which section of the Ir Force Manpower Standard 106A describes a wing safety office's duties during normal peacetime operations?

Responsibilities

Who is the office of primary responsibility (OPR) for explosives site plans?

Safety office

Who monitors the hazard report until the hazard is eliminated?

Safety professionals

Air Force Inspection System (AFIS) inspections are conducted on behalf of whom?

Secretary of the Air Force, Chief of Staff of the Air Force, and commanders at all levels.

What are the two criteria used in determining the priority for abating a hazard?

Severity and probability

A promise of confidentiality is authorized for which mishap?

Spaces

What two activities help ensure that the hazards are mitigated for all findings identified during the annual inspection?

Spot inspections and unit follow-up reporting

Which of the following is a level of command that does not typically include a chief of safety (COS)?

Squadron

What course do occupational safety personnel deliver that teaches how to identify hazards and manage risks?

Supervisor Safety Training

Which is NOT one of the four weapons safety program functions?

Systems safety

Operatorsof which type of vehicles do NOT require motorcycle safety training?

Three-wheeled motorcycles

Who evaluates and determines the need for a cellular phone free school zone?

Traffic Safety Coordination Group

Which is a risk management toll for supervisors and personnel to use when planning travel?

Travel Risk Planning System (TRiPS)

To reduce the potential for traffic mishaps caused by operator fatigue, who establishes and enforces duty-hour limits for operators of government-owned motor vehicles?

Unit Commander

Who approves local written procedures as the authorization for operations involving licensed explosives?

Unit or squadron commander

Which is NOT an assessment rating used under the Air Force Safety Management System (AFSMS)?

Was either met and somewhat effective

Which of the following is NOT an exception allowing motor vehicle operators to use hand-held electronic devices?

When the vehicle is pulled on the roadway

Who chairs the Environment, Safety, and Occupational Health Council (ESOHC)?

Wing Commander or commander's designee

A traffic engineering study would be useful when...

a hazard report identifies an intersection with a high number of accidents.

In order to train and qualify vehicle operators, units that own government motor vehicles are required to develop

a plan of instruction

If you encounter an imminent danger situation, you should immediately notify

a responsible supervisor

A safety evaluation is completed in conjunction with

a unit effectiveness inspection (UEI)

Your hazard abatement recommendations should be

appropriate and feasible

Occupational Safety Managers (OSM) update the Air Expeditionary Force (AEF) Unit Type Code Reporting Tool (ART) with the current deployment status of all

assigned military personnel

The most practical way of establishing an initial mishap notification system is

by written directive

A deficiency which if corrected, eliminated, or avoided, would likely have prevented or mitigated the mishap damage or significant injuries is called a

cause

The abatement priority number (APN) is a code consisting of the risk assessment code (RAC) and the

cost effectiveness index (CEI)

Newly assigned Occupational Safety Managers (OSM) conduct a safety program self-assessment within 90 days of taking a position to

determine the status of the safety program and organization's safety culture

The Air Force classifies mishaps by the

direct total dollar cost of damage and degree of injury/illness

The four major graded areas (MGA) assessed by the Air Force Inspection System (AFIS) include all EXCEPT...

executing the vision

Mishap report recommendations should be both

feasible and effective

A financial blueprint for a specific period of time is called a

financial plan

Action taken to make certain that reported discrepancies have been or are being corrected is called

follow-up action

Bicycle will be equipped with...

front-facing, pedal, side, and a rear-facing reflector

Mishaps involving injuries that occur during participation in some form of duty-related athletic or recreational sport activity is categorized as

ground and industrial - sports and recreation

Temporary measures taken to reduce the degree of risk associated with an occupational hazard or deficiency pending completion of an abatement program are called

interim control measures

A procedure used by supervisors and employees to assess the hazards associated with a work procedure and determine the safest and most efficient means of doing a given task best defines

job safety analysis

Fatigue, complacency, illness, and the physical/technological environment and their effect on individual performance can be described as

latent failures

When a mishap occurs involving an individual in permanent change of station status, the mishap is accountable to the

losing command until the individual signs in at the next duty station

Traffic safety training is required for...

military personnel under the age of 26

Using statistical charts and graphs in the analysis process is helpful in determining

mishap areas that should be analyzed further

Mishaps are investigated to

prevent future mishaps

Information exempt from release outside the Air Force community by statue or case las as known as

privileged

An assessment of the likelihood that a hazard or deficiency will result in a mishap is called

probability

Safety investigations and legal investigations are conducted separately to

protect privileged safety information in the report

Ultimately, the support agreement is a negotiated contract based on the

receiver's needs and the supplier's ability to meet these needs

A thorough mishap investigation is absolutely necessary not only to determine the events causal to a mishap but also to

recommend corrective actions to prevent recurrence

Although units are cited individually, Occupational Safety and Health Administration (OSHA) may classify a similar finding at another installation as a

repeat citation

Hiding the relationship between the identity of a mishap and the findings, causes, and recommendations is called

sanitizing the report

If a safety investigator believes Air Force personnel questioned in the investigation may be guilty of criminal misconduct, the safety investigator immediately stops the investigation and notifies

the convening authority (CA)

In addition to the unit commander, send a copy of a tenant unit's annual inspection report to the

unit's parent Safety office

The purpose of out briefing after an inspection is to discuss

your findings and recommendations


Conjuntos de estudio relacionados

INTG BUS POLICY/STRATEGY - Week 3

View Set

Security Final Exam Question Study Guide

View Set

CompTIA A+ 220-1002 Lesson 17:Installing Configuring and Troubleshooting Print Devices - Activity questions

View Set

Health and Wellness Chapter 1 Review Questions

View Set

ServSafe 6th Edition Chapters 5-9

View Set

2nd qt refrigeration test review

View Set