Chapter 3

¡Supera tus tareas y exámenes ahora con Quizwiz!

Which of the following techniques used to determine ocean bathymetry is illustrated in the image?

Multi beam Sonar

What percent of Earth's volcanic activity, each year, takes place on the seafloor?

85%

Passive Continental Margins

A B C

Most large ocean floor features owe their origins to _________.

Plate tectonic processes

Judge the following sentence according to the criteria given below: Multibeam SONAR systems have resolution limitations in deep water BECAUSE beams of sound spread out with depth.

The assertion and the reason are both correct, and the reason is valid.

The correct order of seafloor features from the coast to the mid-ocean ridge is:

shelf, slope, rise, abyssal plain.

What is turbidity?

suspended sediment

Drag the appropriate labels to their respective targets. Note that not all labels will be used.

(From left to right on the graphic/counterclockwise) Turbidite Deposit Graded Bed Fine-grained particles Coarse grained particles Type of sediment that settled last during turbidity Type of sediment that settles first

Of the following statements about Earth's hypsographic curve, which is/are true? Choose all that apply.

- The hypsographic curve shows that the average depth of the ocean is about four times the average height of the continents. - The hypsographic curve shows that a majority of the exposed land is below 1 kilometer in elevation. - The hypsographic curve shows that a majority of the ocean floor is more than 4 kilometers deep. - The hypsographic curve shows the percentage of Earth's surface area that is covered by ocean waters.

Which of the following statements accurately describe(s) the depth and height of Earth's surface as shown on the hypsographic curve?

- The percentage of Earth's surface above sea level is 29.2%. - The average depth of the ocean is much greater than the average height of land. - More people have been to the top of the tallest mountain on Earth than have been to the bottom of the deepest trench.

Of the following items, which is/are associated with a passive continental margin? Choose all that apply.

- a continental rise - a wide continental shelf

Which of the following feature(s) is/are associated with the mid-ocean ridge? Choose all that apply.

- hydrothermal vents - volcanoes - basalt volcanism and pillow lavas - a central rift valley

What processes influence the shape and features of continental shelves? Choose all that apply.

- major climate changes, such as ice ages - trench formation at convergent boundaries - large fluctuations in sea level over geologic time - tectonic activity produced by offshore faults

The majority of ocean trenches are associated with ___________. Choose all that apply.

- volcanic arcs and active continental margins - the Pacific Ring of Fire - very deep ocean water depths - subduction zones and associated faults

Select the three that apply.

-It is most likely a deep-ocean trench because they are common along the active continental margins. - It is most likely a deep-ocean trench because they are common along the margins of the Pacific Ocean. - The feature was most likely caused by one oceanic crust subducting under a leading edge of a continent.

Of the following statements about mapping the ocean floor, which is/are true? Choose all that apply.

-Only about 20% of the sea floor has been accurately mapped in detail. -Measurements of sea surface elevation by satellites are used to produce maps of the sea floor. -Multibeam surveys from ships produce very detailed maps of the sea floor.

Of the following techniques, which one(s) can be used to map the sea floor? Choose all that apply.

-recording many depths using a long cable -using satellites to measure the sea surface - direct visitation of the sea floor -sending sound through water (sonar)

Match the words in the left column to the appropriate blanks in the sentences on the right. Make certain each sentence is complete before submitting your answer.

1. A: Mid-ocean ridge 2. C: Ocean basin 3. B: Continental margin

Match the words in the left column to the appropriate blanks in the sentences on the right. Make certain each sentence is complete before submitting your answer.

1. A: Rift valley of a mid-ocean ridge 2. E: Lithosphere 3. C: Asthenosphere 4. B: Fracture zone 5. D: Transform fault

Match the words in the left column to the appropriate blanks in the sentences on the right. Make certain each sentence is complete before submitting your answer.

1. B: Abyssal plain 2. A: Continental shelf 3. D: Continental slope 4. E: Oceanic crust 5. F: Continental rise 6. G: Shelf break 7. C: Continental crust

Match the words in the left column to the appropriate blanks in the sentences on the right. Make certain each sentence is complete before submitting your answer.

1. B: Black smoker 2. A: Magma (heat source) 3. C: Metal sulfide deposits

Match the words in the left column to the appropriate blanks in the sentences on the right. Make certain each sentence is complete before submitting your answer.

1. C: Turbidity current 2. D: Submarine canyons 3. A: Graded bedding 4. B: Deep-sea fans

The features of active and passive continental margins and the characteristics of ocean basins are evidence for existence, or absence of a plate boundary. Read the sentences below, and fill in the blanks to make them complete and correct. Match the words in the left column to the appropriate blanks in the sentences on the right. Make certain each sentence is complete before submitting your answer. Note that some terms will remain unused.

1. Oceanic crust spreads at , creating new crust and slowly enlarging the ocean basin. MID OCEAN RIDGE 2. Submarine canyons are deep valleys at passive continental boundaries. They are likely carved out by turbidity currents, which occur when sediment-laden water rapidly moves down slope. SUBMARINE CANYONS 3. Melt from the subducting plate rises to the surface, erupts through the crust on the overriding plate and forms continental volcanic arcs on continents, or volcanic island arcs in the ocean. CONTINENTAL VOLCANIC ARCS VOLCANIC ARCS 4. Subduction zones surrounding the Pacific Ocean give rise to volcanoes. This area surrounding the Pacific Ocean is called the Ring of Fire. RING OF FIRE

The greatest proportion of Earth's surface lies in this elevation/depth interval.

4,000 - 5,000 m below sea level

A ship's fathometer (an echo sounder) transmits a sound pulse and records the return of an echo 7.4 seconds later. If the speed of sound in water is 1,500 m/second, what is the water depth in meters?

5500 meters

Expanding Ocean Basin

Atlantic Ocean Basin

Refer to the figure above. Where would you expect to find a rift valley?

B

In the figure above, which shows a portion of the hypsographic curve. Which area(s) represent(s) the middle of tectonic plates?

B D

The measurement of ocean depth and the charting of seafloor topography is called __________.

Bathymetry

Characteristics of passive continental margins include which of the following?

Broad continental shelves

Satellites use microwave beams to measure sea level to an accuracy of four ________.

Centimeters

Review the accompanying topographic map of the eastern United States and the figure of a typical continental margin in this region. Label the different features shown. Note that not all labels will be used. Drag the appropriate labels to their respective targets. You do not need to use all labels.

Continental Shelf Shelf Break Continental Slope Continental Rise Passive Continental Margin

Passive margins are usually produced over geologic time by which of the following?

Continental rifting and continued sea floor spreading

Active continental margins are characterized by which of the following?

Deep sea trenches

Where does the deep-ocean basin begin along a passive continental margin?

Continental slope

Which of the following is a difference between passive and active continental margins?

Convergent active margins will have a steep continental slope, whereas passive margins will have a more gradual slope.

In the figure above, darker blue areas indicate deep water, and lighter blue areas indicate shallow water. Land is shown in shades of brown and green. Which area in the figure is on a continental margin?

D

In the figure above, which shows a portion of the hypsographic curve. Which area(s) represent(s) the abyssal plains?

D

Active Continental Margins

D E

Rocks like the ones shown in the photo most likely formed at which of the following tectonic settings?

Divergent plate boundary

What features are associated with a passive continental margin?

Flat coastal terrain Continental rise

What is a linear sea floor feature that is seismically inactive, occurs beyond offset mid-ocean ridge segments, and the relative movement between two points on either side of the feature is in the same direction?

Fracture zone

Which of the following features is related to transform faults along mid-ocean ridges?

Fracture zone

The distinctive type of sedimentary layering that has largest particles on the bottom and smallest particles on the top, with intermediate sized particles in the middle, is called which of the following?

Graded Bedding

What is the characteristic layering of an individual turbidity current deposit called?

Graded bedding

To which planet is NASA sending the spacecraft InSight to study crustal movements similar to earthquakes?

Mars

Why is the average depth of the ocean much greater than the average height of land?

Oceanic crust is more dense than continental crust.

Tamu Massif, the largest single volcano on Earth occurs in which of the following oceans?

Pacific Ocean

Shrinking Ocean Basin

Pacific Ocean Basin

Examine the five words and/or phrases and determine the relationship among the majority of words/phrases. Choose the one option that does not fit the pattern.

Rift valley

Match the term with the appropriate phrase. Drag the terms on the left to the appropriate blanks on the right.

SEISMIC REFLECTION PROFILE used to determine ocean structure beneath the sea floor HYPSOGRAPHIC CURVE cumulative plot of the frequency of depth or elevation BATHYMETRY - measurement of ocean depth and seafloor topography PRECISION DEPTH RECORDER uses high frequency sound waves to measure ocean depth MULTI BEAM SONAR a method of mapping the topography of the ocean floor along a strip up to 60 km wide

The reason the deposit on the bottom forms the way it does is a result of __________.

Settling velocity

Which of the following techniques used to determine ocean bathymetry is illustrated in the image?

Side-scan sonar

The method that is used most frequently to investigate sediment and rock layers of the sea floor is:

Sound waves (specifically seismic reflecting profiling).

The first recorded attempt to measure the ocean's depth was conducted using which of the following techniques?

Sounding

Which of the following is the predominant process that forms the thick blanket of sediment on abyssal plains the deep-ocean floor?

Suspension settling

Judge the following sentence according to the criteria given below: Few abyssal plains are located in the Pacific Ocean BECAUSE turbidity currents only occur along passive continental margins.

The assertion is correct, but the reason is incorrect.

Judge the following sentence according to the criteria given below: The Pacific Ring of Fire is home to the majority of Earth's active volcanoes and large earthquakes BECAUSE of the prevalence of divergent plate boundaries along the Pacific Rim.

The assertion is correct, but the reason is incorrect.

Can you explain why atolls extend from the surface of the ocean down to great depths into the sea? Corals, which make up these ring-shaped structures, can only live where water is warmed and illuminated by sunlight, no more than approximately 45 meters deep. How do you explain an atoll that extends thousands of meters deep?

The coral reef once formed around an active volcano. The reef became a barrier reef, with hard skeletons of previous colonies acting as the scaffolding for new ones on top. The volcano gradually sank into sea, moving with the plate it rested on, as the coral continued to grow upward, leaving the atoll as a ring structure at the top.

Which part of Earth's cumulative hypsographic curve includes the mid-ocean ridges?

The shallowest slope below sea level

Examine the five words and/or phrases and determine the relationship among the majority of words/phrases. Choose the one option that does not fit the pattern.

Trenches

What effect do turbidity currents have on the continental slope?

Turbidity currents are erosive to the continental slope and, as a result, carve out submarine canyons.

Which of the following best describes turbidity currents?

Underwater avalanches of muddy water mixed with rocks and other debris

Which of the following is an example of an active continental margin?

West coast of Chile West coast of the United States

What common item is used in this video to demonstrate a turbidity current?

a large jar filled with water and sediment

The average slope of the continental shelf is approximately ________.

a tenth of a degree

Volcanic features on the ocean floor that are less than 1,000 meters (0.6 miles) tall are called:

abyssal hills or seaknolls.

Extending from the base of the continental rises into the deep-ocean basins are flat depositional surfaces called:

abyssal plains.

Older lithosphere is destroyed in association with:

deep-sea trenches.

Volcanic peaks that are below sea level but rise more than 1 kilometer above the deep-ocean floor and have a flattened top are called ________.

guyots

The direction of motion along a seafloor transform fault is:

in the same direction as the plates are spreading.

The island of Java is an example of a volcanic island associated with volcanic activity at a ________.

island arc

New lithosphere is produced in association with:

oceanic ridges.

Along the margins of the Pacific are found most of Earth's:

oceanic trenches.

With respect to mid-ocean ridges, transform faults are:

perpendicular to the ridge axis.

Volcanic peaks on the deep-ocean floor with conical tops are called:

seamounts.

In comparison with other ocean basins, major sedimentary features such as continental rises and abyssal plains are relatively rare in the Pacific. The primary reason for their scarcity in the Pacific is that __________.

sediment is trapped within the trenches of the convergent plate boundaries ringing the Pacific

Satellites are used to map the ocean floor because ________.

the shape of the ocean surface reflects large features on the seafloor

All true oceanic islands are ________ in origin.

volcanic

Seamounts and abyssal hills are ________ in origin.

volcanic

Warm water (From 30°C to 350°C) hydrothermal vents form:

white smokers.


Conjuntos de estudio relacionados

Marketing Research- Ch.1: The Role of Marketing Research

View Set

SS 121 Will (poly) 1st Midterm Study KEY

View Set

Chapter 16: Outcome Identification and Planning

View Set

CAE practice test: Reading and use of english part 4. Test 1.

View Set