Cisco Practice Final Exam (Study)

¡Supera tus tareas y exámenes ahora con Quizwiz!

A user is attempting to do an http://www.cisco.com/ without success. Which two configuration values must be set on the host to allow this access? (Choose two.)

DNS server default gateway

Match each description with the appropriate type of threat

Electrical threats: brownouts Hardware threat: physical damage to routers Maintenance threat: poor cabling of the network infrastructure

Why are the paired wires twisted in a CAT5 cable?

to provide eletromagnetic noise cancellation

Which two types of applications rely on their traffic having priority over other traffic types through the network? (Choose two.)

video voice

A medium-sized business is researching available options for connecting to the Internet. The company is looking for a high speed option with dedicated, symmetric access. Which connection type should the company choose?

leased line

Which router configuration mode would an administrator use to configure the router for SSH or Telnet login access?

line

What three statements describe features or functions of media access control? (Choose three.)

*It is responsible for detecting transmission errors in transmitted data. *Data link layer protocols define the rules for access to different media. *Ethernet utilizes CSMA/CD.

What are two ways that TCP uses the sequence numbers in a segment? (Choose two.)

- to identify missing segments at the destination - to reassemble the segments at the remote location

For which three reasons was a packet-switched connectionless data communications technology used when developing the Internet? (Choose three.)

1. It can rapidly adapt to the loss of data transmission facilities. 2. It efficiently utilizes the network infrastructure to transfer data. 3. Data packets can travel multiple paths through the network simultaneously.

Which two statements are correct in a comparison of IPv4 and IPv6 packet headers? (Choose two.)

1. The Source Address field name from IPv4 is kept in IPv6. 2. The Time-to-Live field from IPv4 has been replaced by the Hop Limit field in IPv6.

What are two characteristics of a scalable network? (Choose two.)

1. grows in size without impacting existing users 2. suitable for modular devices that allow for expansion

What are two actions performed by a Cisco switch? (Choose two.)

1. using the source MAC addresses of frames to build and maintain a MAC address table 2. utilizing the MAC address table to forward frames via the destination MAC address

Open the PT activity. Perform the tasks in the activity instructions and then answer the question. Which information is obtained from this command output?

10.20.20.3, non-authoritative answer

Fill in the blank. In dotted decimal notation, the IP address ___________ is the last host address for the network 172.25.0.64/26

10101100.00011001.00000000.01000000

A small satellite office has been given the overall network number of 192.168.99.0/24 and the network technician can subdivide the network addresses as needed. The office needs network access for both wired and wireless devices. However, because of the security consideration, these two networks should be separate. The wired network will have 20 devices. The wireless network has a potential connection of 45 devices. Which addressing scheme would be most efficient for these two networks?

192.168.99.0/26 192.168.99.64/27

Which IPv6 address notation is valid?

2001:DB8:0:1111::200

Refer to the exhibit. Using VLSM, what is the largest and smallest subnet mask required on this network in order to minimize address waste?

255.255.254.0 and 255.255.255.252

A network administrator has been issued a network address of 192.31.7.64/26. How many subnets of equal size could be created from the assigned /26 network by using a /28 prefix?

4

A nibble consists of ______ bits.

4

The administrator of a branch office receives an IPv6 prefix of 2001:db8:3000::/52 from the corporate network manager. How many subnets can the administrator create

4096

A PC that is communicating with a web server is utilizing a window size of 6,000 bytes when sending data and a packet size of 1,500 bytes. What byte of information will the web server acknowledge after it has received four packets of data from the PC?

6001

Fill in the blank using a number. The minimum Ethernet frame size is______ bytes. Anything smaller than that should be considered a "runt frame."

64

Refer to the exhibit. HostA is attempting to contact ServerB. Which two statements correctly describe the addressing that HostA will generate in the process? (Choose two.)

A frame with the destination MAC address of RouterA. A packet with the destination IP address of ServerB. Remember:In order to send data to ServerB, HostA will generate a packet that contains the IP address of the destination device on the remote network and a frame that contains the MAC address of the default gateway device on the local network.

Match each item to the type of topology diagram on which it is typically identified:

A logical topology diagram typically depicts the IP addressing scheme and groupings of devices and ports. A physical topology diagram shows how those devices are connected to each other and the network, focusing on the physical locations of intermediary devices, configured ports, and cabling.

Switch# ping 10.1.1.1 Type escape sequence to abort. Sending , 100-byte ICMP Echos to 10.1.1.1, timeout is 2 seconds: UUUU Success rate is 0 percent (0/5) ________________________________ Refer to the exhibit. An administrator is testing connectivity to a remote device with the IP address 10.1.1.1. What does the output of this command indicate

A router along the path did not have a route to the destination.

Refer to the graphic. What is the effect of setting the security mode to WEP on the Linksys integrated router?

It encrypts data between the wireless client and the access point.

Which statement describes a characteristic of the traceroute utility?

It identifies the routers in the path from a source host to a destination host.

What is an ISP?

It is an organization that enables individuals and businesses to connect to the Internet.

What is the function of CSMA/CA in a WLAN?

It provides the mechanism for media access.

What will a host on an Ethernet network do if it receives a frame with a destination MAC address that does not match its own MAC address?

It will discard the frame.

Which devices should be secured to mitigate against MAC address spoofing attacks?

Layer 2 devices

The ARP table in a switch maps which two types of address together?

Layer 3 address to a Layer 2 address

Using default settings, what is the next step in the router boot sequence after the IOS loads from flash?

Locate and load the startup-config file from NVRAM.

Refer to the exhibit. A network engineer is attempting to connect to a new router to perform the initial configuration. The engineer connects a rollover cable from the serial port of a PC to the Aux port on the router, then configures HyperTerminal as shown. The engineer cannot get a login prompt in HyperTerminal. What would fix the problem?

Move the cable to the router console port.

Which service will translate private internal IP addresses into Internet routable public IP addresses?

NAT

Refer to the exhibit. Which two settings could be changed to improve security on the wireless network? (Choose two.)

SSID SSID broadcast

Match the subnetwork to host address that would be included within the subnetwork

Subnet 192.168.1.32/27 will have a valid host range from 192.168.1.33 - 192.168.1.62 with the broadcast address as 192.168.1.63 Subnet 192.168.1.64/27 will have a valid host range from 192.168.1.65 - 192.168.1.94 with the broadcast address as 192.168.1.95 Subnet 192.168.1.96/27 will have a valid host range from 192.168.1.97 - 192.168.1.126 with the broadcast address as 192.168.1.127

R1#config t R1(config)# enable password Cisco123 R1(config)# enable secret Cisco123 R1(config)# service password-encryption R1(config)# line con 0 R1(config-line)# password Cisco789 R1(config-line)# end R1# copy running-config startup-config R1# reload _______________________________ Refer to the exhibit. What will be the result of entering this configuration the next time a network administrator connects a console cable to the router and no additional commands have been entered?

The administrator will be presented with the R1> prompt. Remember: Until both the password password and the login commands are entered in console line configuration mode, no password is required to gain access to enable mode.

A router boots and enters setup mode. What is the reason for this?

The configuration file is missing from NVRAM.

To revert to a previous configuration, an administrator issues the command copy tftp startup-config on a router and enters the host address and file name when prompted. After the command is completed, why does the current configuration remain unchanged?

The configuration should have been copied to the running configuration instead.

Authorized access only! Router> _______________________________ Refer to the exhibit. From global configuration mode, an administrator is attempting to create a message-of-the-day banner by using the command banner motd V Authorized access only! Violators will be prosecuted! V When users log in using Telnet, the banner does not appear correctly. What is the problem?

The delimiting character appears in the banner message.

A network administrator is designing a new network infrastructure that includes both wired and wireless connectivity. Under which situation would a wireless connection be recommended?

The end-user device needs mobility when connecting to the network.

A user calls the help desk to report that a Windows XP workstation is unable to connect to the network after startup and that a popup window says "This connection has limited or no connectivity." The technician asks the user to issue the ipconfig /all command. The user reports the IP address is 169.254.69.196 with subnet mask of 255.255.0.0 and nothing is displayed for the DNS server IP address. What is the cause of the problem?

The workstation is unable to obtain an IP address from a DHCP server.

A network administrator enters the service password-encryption command into the configuration mode of a router. What does this command accomplish?

This command prevents someone from viewing the running configuration passwords.

What three primary functions does data link layer encapsulation provide? (Choose three.)

addressing error detection frame delimiting

Refer to the exhibit. Which layer of the OSI model would format data in this way?

data link

What are the three parts of an IPv6 global unicast address? (Choose three.)

global routing prefix subnet ID interface ID

What makes fiber preferable to copper cabling for interconnecting buildings? (Choose three.)

greater distances per cable run limited susceptibility to EMI/RFI greater bandwidth potential

Fill in the blank. Do not abbreviate. Use lower case. Which interface configuration mode command puts a Layer 3 switch interface into Layer 3 mode?

no switchport

Open the PT Activity. Perform the tasks in the activity instructions and then answer the question. What is the secret keyword that is displayed on the web page?

packet

Which two functions are primary functions of a router? (Choose two.)

packet switching path selection

A network team is comparing physical WAN topologies for connecting remote sites to a headquarters building. Which topology provides high availability and connects some, but not all, remote sites?

partial mesh

A network administrator is troubleshooting connectivity issues on a server. Using a tester, the administrator notices that the signals generated by the server NIC are distorted and not usable. In which layer of the OSI model is the error categorized?

physical layer

Why are port numbers included in the TCP header of a segment?

to enable a receiving host to forward the data to the appropriate application

Which is a function of the show ip route command when used as a tool for troubleshooting network connectivity?

shows the IP address of the next hop router for each route

What information is added during encapsulation at OSI Layer 3?

source and destination IP address

What is one purpose of the TCP three-way handshake?

synchronizing sequence numbers between source and destination in preparation for data transfer


Conjuntos de estudio relacionados

Writing a Compare-and-Contrast Essay about Presentation of Ideas

View Set

Music Appreciation Unit2 Harmony

View Set

Introduction to the Levels and Functions of Criminal Courts Exam

View Set

Introduction to MasteringBiology for Non-Majors

View Set

Experience Psychology: Chapter 12: Psychological Disorders: Study Guide

View Set