Comptia A+ 1001
A user accidentally spills liquid on a laptop. The user wants the device to be fixed and would like to know how much it will cost. Which of the following steps should the technician take NEXT to verify if the device is repairable before committing to a price? (Choose two.) A. Place the device in rice for a few days. B. Search the Internet for repair tutorials. C. Document the screw locations. D. Consult colleagues for advice. E. Remove the case and organize the parts.
- Remove the case and organize the parts. - Document the screw locations.
A technician is replacing a broken screen on a new company laptop but does not have repair information from the vendor. Which of the following is the BEST way to proceed? A. Document and label the cable and screw locations. B. Replace the screen with a non-OEM. C. Update the firmware on the device before repairing it. D. Wait for the vendor to provide more information.
A. Document and label the cable and screw locations.
Joe, a user, recently purchased a new multifunction printer and attempted to install it himself. He informed a technician that the printer is on his list of printers, but he is unable to print. The technician sees that the printer is listed as a generic printer under Devices and Printers. Which of the following should the technician do NEXT? A. Download the correct drivers from the manufacturer's website and install them B. Reboot the computer into safe mode and try to print a test page C. Unplug the USB cable from the printer and try another USB slot on the PC D. Set the printer as the default within the device properties
A. Download the correct drivers from the manufacturer's website and install them
Which of the following resources in the MOST critical when using cloud file-storage synchronization applications? A. I/O bandwidth B. Disk speed C. RAM utilization D. CPU utilization
A. I/O bandwidth
A customer's laptop display has suddenly become very dim. The image of the display can only be seen with a bright, external light, as adjusting the brightness/ contracts controls does not cause much change. Which of the following components MOST likely needs to be replaced? A. Inverter B. LCD panel C. Video card D. Digitizer
A. Inverter
Joe, a user, has purchased a new mobile device that uses a different OS than his previous one. Joe wants to copy his contacts and appointments from his corporate account without entering them manually. Which of the following would be the BEST way for a technician to assist Joe? A. Log into the same email provider on the new device, and restore the contacts and dates. B. Create a Bluetooth connection between Joe's devices, and copy his contacts and calendar. C. Back up the old mobile device to a PC, and import the contacts and schedule from the PC. D. Use NFC to transfer all compatible data from one device to the other.
A. Log into the same email provider on the new device, and restore the contacts and dates.
An end user has signed up to use a web-based calendar application. Which of the following solutions has the user purchased? A. SaaS B. DaaS C. PaaS D. laaS
A. SaaS
An engineer is working at a remote site that does not have Internet access. Which of the following features should the engineer use to connect a laptop to the Internet if hotspot functionality is unavailable? A. Tethering B. Near field communication C. Wireless LAN D. Virtual private network
A. Tethering
A technician is troubleshooting network connectivity issues after a new wireless router was installed in an office. Users who connect to the new router are unable to access LAN resources. Which of the following is the MOST likely cause of the issue? A. There are conflicting DHCP servers on the network B. There are conflicting ARP records C. There are conflicting gateways on the network D. There are conflicting IP protocols
A. There are conflicting DHCP servers on the network
A technician is setting up a Windows mobile device for a user who had trouble reading text on a previous device, especially at night. Which of the following adjustments would be MOST appropriate? A. Use the magnifier. B. Increase the resolution. C. Use haptic feedback. D. Utilize text-to-speech.
A. Use the magnifier.
A technician is setting up a VM for use in testing software deployments. The VM is offline, but the hypervisor is not. Which of the following settings should the technician change to resolve this issue? A. Virtual CPU B. Virtual storage C. Virtual security D. Virtual switch E. Virtual RAM
A. Virtual CPU
A server administrator set up a VM to be used in a lab setting. A technician is setting up thin-client computers to access this VM. Which of the following tasks are required to complete the project? (Choose three.) A.Install the necessary applications. B.Install a USB keyboard and mouse. C.Install the operating system. D.Connect the device to a monitor. E.Install the latest system updates. F.Install the latest device drivers. G.Connect the device to the network. H.Connect the device to a printer.
A.Install the necessary applications. E.Install the latest system updates. G.Connect the device to the network.
A technician needs to routinely run scripting commands in Linux but does not want to walk over the server room every time to perform the task. The technician also travels between buildings and has a Windows 10 laptop with 4GB of memory and a fully partitioned 500GB hard drive. Which of the following steps should the technician take to resolve this issue? (Choose two.) A.Repartition the hard drive. B.Install a Linux guest VM. C.Add another 500GB hard drive. D.Install Linux on a new ext3 partition. E.Increase the memory to 8GB. F.Create a Linux LiveBoot CD.
A.Repartition the hard drive. D.Install Linux on a new ext3 partition.
Which of the following Ethernet cables would BEST support an application that requires a 600 Mbps throughput at the lowest price point? A. Cat 3 B. Cat 5e C. Cat 6 D. Cat 5
B. Cat 5e
Which of the following features will save the battery life of a laptop significantly if they are disabled? (Choose two.) A. Touchpad B. Cellular C. Screen orientation D. Volume E. Bluetooth F. Fingerprint reader
B. Cellular E. Bluetooth
A company has very strict rules regarding proprietary information leaving the premises. All computers host proprietary information. A technician is called to repair a computer on-site at the company's corporate office. The technician identifies the troubleshooting steps to create a plan of action. The technician determines the computer needs to be taken off-site for repair. Which of the following should the technician do NEXT? A. Get authorization from the manager. B. Check corporate policies for guidance. C. Delete proprietary data before leaving the building. D. Remove the HDD and send the device for repair.
B. Check corporate policies for guidance.
A projector's image begins to flicker during a presentation. The laptop display does not produce this issue. When a technician changes the resolution on the laptop, the issue persists. Which of the following is the NEXT step the technician should take? A. Check the connectivity of the power cable. B. Check the connectivity of the VGA cable. C. Change the aspect ratio on the laptop. D. Change the settings of the projector.
B. Check the connectivity of the VGA cable.
A technician is troubleshooting a Windows CAD workstation that is running slow. The computer uses RAID 10 and has dual GPU cards. The user states that the same application runs faster on an identical workstation. Which of the following should the technician perform FIRST to troubleshoot the problem? A. Replace the write cache battery. B. Check the event log any cache issues. C. Clear the RAID configuration file and restart the PC. D. Replace the RAID controller write cache module.
B. Check the event log any cache issues.
Joe, a user, sets up an IMAP connection on his smartphone to connect to webmail. Joe is able to view email, but he receives an error message when trying to send a message. When viewing the mail client's configuration, Joe sees a valid SMTP server and port. Which of the following should Joe check NEXT to resolve the issue? A. Ensure the SSL/TLS option is being used B. Configure the email account as a POP3 connection C. Check that the account password is still valid D. Make sure the smartphone is not in airplane mode
B. Configure the email account as a POP3 connection
Which of the following is the MOST likely cause for a network PC to have an APIPA address? A. DNS resolution B. DHCP failure C. Duplicate IP address D. Cleared ARP cache
B. DHCP failure
A business owner wants to provide security to laptop users with the ability to charge their devices, access corporate LAN resources, and allow for a variety of their removable hardware. Which of the following devices would BEST meet the owner's needs? A. Port replicator B. Docking station C. Thunderbolt D. USB hub
B. Docking station
Which of the following devices is used to implement network security policies for an environment? A.Managed switch B.Firewall C.Repeater D.Gateway
B. Firewall
A technician receives a cellular from a manager. The technician is instructed to download a service manual directly from the Internet to a laptop. However, there is no WiFi signal or wired Ethernet. Which of the following would be the MOST appropriate connections for the technician to use? A. NFC B. Hotspot C. Bluetooth D. VPN
B. Hotspot
An ISP has notified a SOHO user of a usage increase on the user's network. The user is concerned the WiFi network is being utilized by unauthorized users. Which of the following would minimize the unauthorized use of the WiFi network? A. Create a network DMZ B. Implement MAC filtering C. Enable NAT D. Upgrade the encryption standards
B. Implement MAC filtering
Several company users are frequently forgetting passwords for their mobile devices and applications. Which of the following should the systems administrator do to reduce the number of help desk tickets submitted? A. Enable multifactor authentication. B. Implement single sign-on. C. Configure biometric authentication. D. Remove complex password requirements.
B. Implement single sign-on.
A technician is determining the specifications for a desktop computer that will be used at trade shows all over the world. The computer will have the maximum amount of RAM. The CPU, GPU, and storage will be typical of a business workstation. Which of the following system parameters is the MOST important for the technician to consider when choosing a power supply? A. Efficiency rating B. Input voltage C. 12V rail amperage D. Number of SATA connectors
B. Input voltage
A technician needs to call a user's cellular provider to troubleshoot a network speed issue with the user's mobile device. Which of the following technologies is the technician troubleshooting? A. Near-field communication B. Long-term evolution C. Radio frequency ID D. Z-wave
B. Long-term evolution
A user wants to build a computer with a high-end CPU, plenty of RAM, and a high-end graphics card for online gaming. The user wants to verify that the graphics card is compatible with the motherboard. Which of the following connection types would the user MOST likely utilize to connect the video card to the motherboard? A. ISA B. PCle C. AGP D. USB
B. PCle
A technician was called to check an unexpected clicking noise on a desktop that has become more frequent every time a video editing application is loaded. The system fans have been replaced, but the clicking noise remains. Diagnostics have been run on the video card. Which of the following should me the technician do FIRST? A. Replace the hard drive. B. Perform a full data backup. C. Do a System Restore. D. Replace the video card. E. Scan the system for viruses.
B. Perform a full data backup.
A technician is hired to install network cable in a crawl space running the length of a hallway. To do so without a fire code violation, which of the following types of cable should the technician run? A. Fiber B. Plenum C. Shielded D. Coaxial
B. Plenum
Which of the following terminates a coaxial cable? A. DB9 B. RG-59 C. RJ45 D. RS-232
B. RG-59
In a virtual environment, which of the following allows all the VMs to have RAM allocated for use? A. Measured service B. Resource pooling C. Virtual application streaming D. Synchronization
B. Resource pooling
A user is unable to access websites and has reported connectivity issues with pop-ups on the screen. A technician removes malware, and then is able to ping the router and access the websites. Which of the following NEXT steps should the technician perform in troubleshooting this issue? (Choose two.) A. Verify the settings in IPConfig. B. Run a virus scan. C. Reconnect the device to the network. D. Documents findings, actions, and outcomes. E. Research the problem based on symptoms. F. Reboot the device to verify the fix.
B. Run a virus scan. D. Documents findings, actions, and outcomes.
A technician is setting up a WiFi-enabled thermostat for a customer, but the customer is concerned about IoT devices getting hacked. Which of the following BEST address the customer's concerns? (Choose two.) A. Upgrade the customer's wireless network encryption to WPA B. Separate the IoT thermostat by segregating it in a DMZ network. C. Enable two-factor authentication for the IoT device's cloud account, if it is available. D. Disable wireless access on the thermostat to make it unshakable. E. Upgrade the customer's router to the latest version to improve network security. F. Use the latest encryption standard on the wireless network and set a strong password.
B. Separate the IoT thermostat by segregating it in a DMZ network. F. Use the latest encryption standard on the wireless network and set a strong password.
Ann, an accountant, reports that after turning on her new laptop, she received a message stating her IP address is already in use on the system. She tried going back to her old desktop, which she now only uses for email, but received the same message. The technician checks the account and sees a comment that Ann requires a special network setup to connect to the banking software. Which of the following should the technician do to resolve the issue? A. Remove the static IP configuration from the desktop. B. Set the laptop configuration to DHCP to prevent conflicts. C. Replace the network card in the laptop, as it may be defective. D. Bridge the LAN connection between the laptop and the desktop.
B. Set the laptop configuration to DHCP to prevent conflicts.
A technician is setting up a printer for a small office that does not have an RJ-45 jack. The users' computers are all in the same workgroup and are connected physically to the same network switch. The technician needs to make sure all users can print to the new printer through the switch. Which of the following should the technician configure? A. Print server B. Shared printer C. Cloud printing D. Bluetooth printing
B. Shared printer
An associate is seeking advice on which device to purchase for a friend who is a business owner. The friend needs the ability to chat activity while keeping in contact with the home office. Which of the following would be the BEST recommendation? A. Fitness monitor B. Smart watch C. Global positioning sensor D. Portable hotspot
B. Smart watch
A technician has noticed that when at company headquarters the laptop connection to the Internet is more responsive than when using the company-provided phone as a hotspot. The technician updated the drivers on the WiFi NIC without resolution and then verified the configuration on the WiFi was correct. Which of the following configurations could cause the decreased performance? A. There is a low RFID signal. B. The connection if throttled. C. SSID is not found. D. It is out of range.
B. The connection if throttled.
A user is connected to a docking station with an optical drive and is trying to back up personal files to removable media, but is encountering write errors. Which of the following is MOST likely cause of the errors? A. The files are encrypted B. The disk has already been finalized C. There is a corrupt file on the hard drive D. The files are not compatible with the type of disk used
B. The disk has already been finalized
A user logs on a PC and receives a message stating there is a duplicate IP address on the network. After a system restart, the user notices the same error. Which of the following is the MOST probable cause of the error? A. The user has moved to a different office. B. The user has set a static IP address. C. The user is still logged into another device. D. The user has wireless and wired connections.
B. The user has set a static IP address.
A company offers several out-of-the-box computer configurations to its clients. A client requests several new computers for its newest location, which will be used by guests to check in upon arrival and fill out contact information. Which of the following configurations would BEST fit this customer's needs? A. Thick client B. Touch-screen kiosk C. CAD workstation D. Virtualized host computer
B. Touch-screen kiosk
A shipping department is having problems with its thermal label printer. Two columns on the left are not appearing on all labels. Which of the following should a technician do FIRST? A. Run a label calibration B. Verify the ribbon is correctly aligned to the label C. Remove stuck labels from the print path D. Replace the print head
B. Verify the ribbon is correctly aligned to the label
A user is having a problem with printing a specific document type. The network printer OCP shows that the printer is online with no errors. Other users are not having the same issue. The user sends the document to another printer and the document prints. Which of the following should a technician do FIRST in troubleshooting the problem? A. Stop and restart the PC print spooler service. B. Verify the user is sending the document to the correct printer queue. C. Have each user send the same document to the correct printer queue. D. Stop and restart the print server queues, and then have the user resend the document.
B. Verify the user is sending the document to the correct printer queue.
Which of the following ports are used for secure sessions? (Select two.) A.110 B.443 C.25 D.80 E.22 F.23
B.443 E.22
Joe, a user, reports that his new smart wearable device is not synchronizing to his mobile device. Both devices are powered on, but the mobile device fails to read the data from the wearable. Which of the following will MOST likely fix this issue? A.Set the SSID B.Pair the devices C.Update the smart wearable device firmware D.Enable NFC
B.Pair the devices
A technician wants to block remote logins to a server. Which of the following ports should be blocked? A. 443 B. 80 C. 23 D. 21
C. 23
A customer wants to upgrade a PC's internal storage to have more room to store backups, photos, and videos. The new storage should be large enough to avoid expanding again next year. Which of the following BEST meets these needs? A. 500TB SAN B. 50GB NAS C. 3TB HDD D. 512GB SSD
C. 3TB HDD
Which of the following channels would commonly be used on an 802.11 wireless network? A. 802 B. 17 C. 6 D. 8080
C. 6
Which of the following wireless standards is only capable of 5GHz frequencies? A. 802.11b B. 802.11ac C. 802.11a D. 802.11g
C. 802.11a
A technician is dispatched to troubleshoot a slow performance issue on a PC. Upon arrival, the technician immediately opens Task Manager and sees that CPU and RAM performance are within normal ranges. The technician then checks and verifies the speed and duplex settings and performance on the network card. The technician then temporarily disables the antivirus to see if performance is affected, and it is not. After re-enabling the antivirus, which of the following is the NEXT best stop for the technician to take? A. Update the operating system, drivers, and firmware on the PC B. Log into the PC with another user profile and test performance C. Check to see if insufficient hard drive space is causing the issue D. Shut down the PC, unplug the power for 30 seconds, and then boot the PC
C. Check to see if insufficient hard drive space is causing the issue
An employee's mobile device no longer charges, and the employee believes the battery is bad. A technician tests the mobile device and finds it will charge on a wireless charging pad but not when it is connected to a charging cable. Other devices charge without issue when the cable is used. Which of the following should the technician perform FIRST to resolve the issue? A. Issue a new charging cable to the employee B. Replace the mobile device's battery C. Clean out the charging port on the device D. Send the device for service and give the employee a loaner
C. Clean out the charging port on the device
A user connects a laptop to a docking station but is unable to see an image on the external monitor. The user tests the docking station USB ports, and they are working fine. Which of the following should be done NEXT? A. Check for firmware updates B. Replace the external monitor C. Configure extended display mode D. Adjust the laptop's BIOS settings
C. Configure extended display mode
A technician has been informed that multiple users are receiving duplicate IP address warnings on their workstations, and they are unable to browse the Internet. Which of the following server types should the technician log in to in order to resolve the problem? A. DNS server B. Proxy server C. DHCP server. D. RADIUS serverterm-97
C. DHCP server
Which of the following Internet connection types often terminates at a switching center and then requires the use of a different media for the last mile to the customer? A. ISDN B. Fiber C. DSL D. Cable
C. DSL
A customer wants to purchase a new home computer. The machine will mainly be used for internal browsing and streaming video, except on weekends when the customers' son will use it to play games with friends. Which of the following should the technician focus on to meet these requirements? A. 80mm case fans B. RAID 5 array C. Four-core processor D. 16GB DDR2 memory E. Dual monitorsF. Encrypted hard drive
C. Four-core processor
A network administrator must install a device that will proactively stop outside attacks from reaching the LAN. Which of the following devices would BEST meet the organization's needs? A. Proxy server B. IDS C. IPS D. Authentication server.
C. IPS
Which of the following is the main purpose of the +5VSB output of a power supply? A. It acts as the main voltage supply to the motherboard and processor. B. It provides power to the audio and sound boards of the machine C. It allows peripherals to draw power when the machine is off D. It powers all expansion cards and external device hubs
C. It allows peripherals to draw power when the machine is off
A network administrator is attempting to access the firewall while inside the datacenter. Which of the following peripherals must be connected to do so? A. Mouse B. Touchpad C. KVM D. Keyboard
C. KVM
A user's laptop is shutting down unexpectedly. The technician discovers the shutdowns only happen when the laptop is moved from one room to another. The technician reseated the hard drive, memory, battery, and LCD cable, but the laptop continues to shut down. Which of the following is the MOST probable cause of the issue? A. Residual energy on the motherboard B. System overheating C. Loose battery connection D. Distended capacitors E. CMOS battery failure
C. Loose battery connection
A client has three locations within city limits that need to be networked. Vendor network requirements for all three locations are a minimum of 1GB. Which of the following are the types of networks that will MOST likely be used for internal office and office-to-office networking? (Choose two.) A. WAN B. WLAN C. MAN D. PANE. SAN F. LAN
C. MAN F. LAN
Which of the following peripheral types is MOST likely to be used to input actions into a PC? A. Webcam B. Monitor C. Mouse D. Optical drive
C. Mouse
During an inspection, it was found that data racks were not properly grounded. To pass the inspection and address a growing concern to protect data cabling and equipment, a technician must make sure all racks are properly grounded. Which of the following tools should the technician use to verify this has been completed? A. Tone generator B. Cable tester C. Multimeter D. Voltmeter
C. Multimeter
Which of the following technologies can be used for wireless payments? A. IR B. Bluetooth C. NFC D. LTE
C. NFC
A customer recently moved a high-end graphics card from a known-working computer to a different computer. The computer works without issue when viewing email and web pages or when using certain applications. However, when a game with high-end graphics requirements is opened, the program will run for a few minutes before the computer shuts down. Which of the following is MOST likely causing the problem? A. CPU frequency B. Video RAM C. Power supply wattage D. Monitor resolution
C. Power supply wattage
After upgrading a smartphone's OS, Joe, a user, reports the smartphone no longer connects to his automobile automatically when near it, Joe, restarts the smartphone, but the problem persists. Which of the following should a technician do NEXT to restore the previous functionality? A. Connect the smartphone to the automobile via USB B. Perform a rollback of the smartphone's OS C. Reenable the smartphone's Bluetooth radio D. Pair the smartphone with the automobile
C. Reenable the smartphone's Bluetooth radio
A technician is buying a PC that will host three VMs running at the same time with the current configuration. The technician believes there might be a need to run several additional VMs in the near future. Which of the following resources would be the MOST important to upgrade to allow for the additional VMs? A. CPU B. NIC C. SSD D. RAM
C. SSD
A systems administrator receives a notification from the RAID controller that the RAID 5 array is degraded. Upon logging into the server, the administrator sees that on local disk 0, physical disk 2 has failed. Which of the following is the BEST course of action to take to resolve the problem? A. Delete logical disk 0 and manually configure a new RAID array only using the known-good working drives. Wait until the array is rebuilt and confirm in the RAID controller that the system is no longer degraded. B. Immediately replace physical disk 2. Wait until the arrays is rebuilt and confirm in the RAID controller that the system is no longer degraded. C. Schedule system downtime and replace physical disk 2. Wait until the array is rebuilt and confirm in the RAID controller that the system is no longer degraded. D. In the controller, convert the RAID 5 array to RAID 0 array to avoid system downtime. Wait until the array is rebuilt and confirm in the RAID controller that the system is no longer degraded.
C. Schedule system downtime and replace physical disk 2. Wait until the array is rebuilt and confirm in the RAID controller that the system is no longer degraded.
Which of the following connects a PC to its default gateway? A. NIC B. Router C. Switch D. Cable modem
C. Switch
Which of the following devices performs forwarding decisions based on MAC addresses? A. Hub B. Router C. Switch D. Repeater
C. Switch
A technician is troubleshooting network connectivity issues after a new wireless router was installed in an office. Users who connect to the new router are unable to access LAN resources. Which of the following is the MOST likely cause of the issue? A. There are conflicting gateways on the network B. There are conflicting ARP records C. There are conflicting DHCP servers on the network D. There are conflicting IP protocols
C. There are conflicting DHCP servers on the network
A user's smartphone has been slow recently. A technician sees the phone was purchased two months ago, and it is top of the line. About a month ago, a new OS update was installed. To address the issue, the technician runs a hardware diagnostic on the device, and it reports no problems. Which of the following is MOST likely the cause of the performance issue on the device? A. The internal memory is failing on the device B. The device is currently running in airplane mode C. Too many applications are running updates D. The OS update is too resource intensive for the device
C. Too many applications are running updates
Which of the following devices can be used to connect multiple devices within broadcasting to every network port? A. Firewall B. Hub C. Unmanaged switch D. Cable modern
C. Unmanaged switch
Ann, a user, needs to attend several day-long conferences and wants to ensure her mobile device will have enough power for these events. She is concerned about wall outlet availability at the conferences and needs to continuously use her device for important updates. Which of the following should a technician recommend to BEST accommodate Ann's needs? A. Extra charging cords B. Built-in battery case C. Wireless charging pad D. Airplane mode
C. Wireless charging pad
The cloud model that represents a company maintaining some data in on-premise storage and some data in cloud-based storage is known as: A. public B. private C. hybrid D. community
C. hybrid
A user is no longer able to browse the Internet after returning from vacation. The user is able to log in and navigate to the local intranet, but not to any outside sites. A technician pings a well-known website by name but gets no reply. The technician then pings its IP address and gets a reply. Which of the following commands will MOST likely resolve the issue? A. ipconfig /all B. ipconfig /release C. ipconfig /flushdns D. ipconfig /setclassid
C. ipconfig /flushdns
Which of the following peripherals would a company use to take inventory quickly and update price tags for products? (Choose two.) A.Magnetic reader B.NFC device C.Barcode scanner D.KVM switch E.Label printer F.Latted scanner
C.Barcode scanner A. Magnetic reader
About one week ago, access to files on a network server became significantly slower. Today, network files are completely unavailable. A technician is able to make a remote connection to the server. Which of the following should the technician check NEXT? A.Available storage space B.NIC configuration C.RAID 5 array D. RAM utilization
C.RAID 5 array
A user brings in a smartphone for repair. The device is unable to send/receive calls or connect to WiFi. All applications on the device are working unless they require connectivity. Which of the following is MOST likely causing the problem? A. VPN B. Tethering C. Disabled hotspot D. Airplane mode
D. Airplane mode
A user is experiencing email problems and explains to a technician that all emails with graphics or images do not display the graphics. Which of the following configurations would correct this behavior? A. Change the email settings in antivirus. B. Change the email proxy settings. C. Change the firewall security settings. D. Change the security settings of the email client. E. Change the trusted sites in the browser settings.
D. Change the security settings of the email client.
Ann, a user, reports that after setting up a new WAP in her kitchen she is experiencing intermittent connectivity issues. Which of the following should a technician check FIRST? A. SSID B. Frequency C. Antenna power level D. Channels
D. Channels
A workstation was just moved to a new work location without a surge protector. It was working the day before, but now the PC will not power on, the fans will not spin, and there are no signs of activity. Which of the following should the technician do FIRST? A. Check the voltage switch B. Check the voltage of the PSU with a tester C. Test for distended capacitors D. Check the power cable connection
D. Check the power cable connection
A user printed several documents to a shared network copier and noticed that they have very faint color density. A technician investigates the issue and verifies that the printer had a maintenance kit installed recently. Which of the following next steps will MOST likely resolve the issue? (Select two.) A. Empty the waste toner bottlers B. Replace the fuser module C. Adjust the printer settings D. Clean the paper tray rollers E. Replace the developer F. Replace the toner cartridges
D. Clean the paper tray rollers F. Replace the toner cartridges
A server needs a RAM upgrade, and a technician has been tasked with retrieving the RAM from storage and then installing it. Whish of the following is the BEST RAM type for the technician to retrieve? A. SoDIMM B. ECC C. Single channel D. DDR4
D. DDR4
A technician is setting up a new wireless network at a branch office that previously had only wired connectivity with statically assigned IP addresses. After setting up the network, the technician configures a server to provide IP addresses to wireless clients. During testing, the technician is unable to access the Internet or named network resources. The technician receives a valid IP address from the DHCP server and can ping the default gateway. Which of the following should be technician check NEXT to resolve this issue? A. Enable file and printer sharing in the OS. B. Verify the Windows Firewall is turned off. C. Configure the wireless network's SSID to be hidden. D. Ensure the options are configured to provide a DNS server.
D. Ensure the options are configured to provide a DNS server.
A user reports that printing on heavy cardstock paper results in the image smearing if touched. When printing on plain paper, the problem does not occur. Which of the following would be the NEXT troubleshooting step to perform? A. Replace the toner cartridge. B. Change the paper feed rate. C. Clean the transfer roller. D. Increase the fuser temperature.
D. Increase the fuser temperature.
An analyst asks a technician to recommend a solution for a customer in the software development industry, where the customer can test a variety of OS's running the various applications that the customer produces. The customer wants to minimize the investment in hardware. Which of the following solutions should the technician recommended to BEST meet the customer's requirement? A. Purchase a number of low-cost devices, installing the required Oss and applications on each one. Use separate machines for each testing environment. B. Purchase a number of computers, installing a VM on each one. Configure each VM with an OS for the testing environment. C. Purchase one computer and create images for each computer configuration and OS. Re-image the machine for each testing environment. D. Purchase a high-end system meeting the hardware requirements for all of the individual Oss and applications. Configure a VM for each testing environment.
D. Purchase a high-end system meeting the hardware requirements for all of the individual Oss and applications. Configure a VM for each testing environment.
Which of the following connector types is used to terminate household telephone cabling? A. RG-59 B. RJ-11 C. RG-6 D. RJ-45
D. RJ-11
A technician has been asked to fix a problem with a projector. The projector lamp turns off for brief periods during a demonstration. After the technician replaced the lamp, the problem continued with an added message that appears just before the lamp turns off. Which of the following MOST likely need to be performed? (Choose two.) A. Update the laptop video driver B. Change the video resolution C. Adjust the brightness D. Reset the lamp life counter E. Install a higher lumen lamp F. Replace the cooling fan
D. Reset the lamp life counter F. Replace the cooling fan
A customer asks a technician to help set up a specialized computing system for video editing. Which of the following should the technician install on the workstation to BEST meet the customer's specifications? (Choose two.) A. Hypervisor B. NAS C. Gigabit NIC D. SSD E. Docking station F. Dual monitors
D. SSD F. Dual monitors
A technician replaced a broken LED screen on a mobile computer. The operating system can be seen perfectly on screen, but the touch screen is non-responsive. Which of the following are the MOST probable root causes for the given failure? (Choose three.) A. The new touch-screen drivers must be installed B. The touch screen must be calibrated after a replacement. C. The LCD panel firmware must be updated. D. The hardware replacement used is a non-touch-screen. E. The replacement part is dead-on-arrival. F. The digitizer cable is not seated properly on the motherboard. G. The grounding screws are not securely attached.
D. The hardware replacement used is a non-touch-screen. F. The digitizer cable is not seated properly on the motherboard. A. The new touch-screen drivers must be installed
The graphics has an issue with printing certain files. The printer does not print the complete image on larger files. A technician verifies the network speed of the printer is set to 1GB and that regular text files print without issue. Which of the following is the MOST likely cause of this problem? A. The printer network connection is set to half duplex B. The print server is timing out C. The users are not printing in post-script mode D. The printer needs more RAM
D. The printer needs more RAM
A laptop is connected to a conference room projector in extended display mode. The desktop icons appear normal on the laptop, but are disproportionate and illegible on the projector screen. Which of the following should the technician check? A. Focus B. Keystone C. HDMI connection D. Video resolution
D. Video resolution
The feature that allows users to store files in cloud-based when necessary, but can be removed when space is freed up, is known as: A. shared resources B. resource pool C. synchronization application D. on-demand
D. on-demand
Which of the following services provides the ability to resolve UNC to appropriate IP addresses? A.Web server B.DHCP C.Proxy D.DNS
D.DNS
Which of the following devices can utilize VLANs to secure networks? A.Bridge B.Repeater C.Hub D.Switch
D.Switch
A technician is replacing an older video card with a new high-end video card in a workstation. The installation was successful, the new card seated properly, and power is connected. However, upon booting, the computer now emits several beeps and will not boot, but shows no error messages. Which of the following is MOST likely the cause of this issue? A. The BIOS is out-of-date B. The firmware is out-of-date C. There is an onboard RAM mismatch D. GPU is overlocked E. The is not enough PSU output
E. The is not enough PSU output
A customer contacts the help disk stating a laptop does not remain charged for more than 30 minutes and will not charge more than 15%. Which of the following components are the MOST likely causes the issue? (Select three.) A.Processor B.Motherboard C.Battery D.Backlit keyboard E.VGA card F.AC adapter G.LCD power inverter H.Wireless antenna
F. AC adapter G.LCD power inverter C.Battery
A systems administrator is configuring a server to host several virtual machines. The administrator configures the server and is ready to begin provisioning the virtual machines. Which of the following features should the administrator utilize to complete the task? A. Virtual LAN B. Disk management C. Terminal services D. Device Manager E. Hypervisor
Hypervisor
Some users are unable to access the Internet form their workstations. A technician runs the ipconfig command on one of the workstations and sees the following: A. The users are not getting correct IP addresses from the DHCP server B. There is a problem with a DNS server in the office C. There is a problem with a router in the office D. The wireless access point in the area is down
There is a problem with a router in the office
