Configuring ethernet switching

¡Supera tus tareas y exámenes ahora con Quizwiz!

An engineer's desktop PC connects to a switch at the main site. A router at the main site connects to each branch through a serial link, with one small router and switch at each branch. Which of the following command must be configured on the branch office switches, in the listed configuration mode, to allow the engineer to telnet to the branch office switches?

A. The ip address command in VLAN configuration mode D. The ip default-gateway command in global configuration mode. F. the password command in vty line configuration mode.

An engineer had formerly configured a Cisco 2960 switch to allow Telnet access so that the switch expected a password of mypassword from the Telnet user. The engineer then changed the configuration to support Secure Shell. Which of the following commands could have been part of the new configuration?

A. username name password password global configuration mode sub command. B. login local vty mode sub command.

Which of the following is required when configuring port security with sticky learning?

B. Enabling port security with the switchport port-security interface sub command.

The following command was copied and pasted into configuration mode when a user was telnetted into a Cisco switch: banner login this is the login banner Which of the following is true about what occurs the next time a user logs in from the console?

B. The banner text "his is" is displayed.

Imagine that you have configured the enable secret command, followed by the enable password command, from the console. you log out of the switch and log back in at the console. Which command defines the password that you had to enter to access privileged mode?

B. enable secret

In which of the following modes of the CLI could you configure the duplex setting for interface Fast Ethernet 0/5?

E. Interface configuration mode.

Which of the following describes a way to disable IEEE standard auto negotiation on a 10/100 port on a Cisco switch?

F. Configure the speed 100 and duplex full interface sub command.


Conjuntos de estudio relacionados

Catcher in the Rye chapters 1-14

View Set

Section VIII - Long-Term Care Policies

View Set

Intro to Cultural Anthropology Final

View Set

Chapter 34: THE GREAT WAR: THE WORLD IN UPHEAVAL

View Set

Hello Explorer 2 unit 6 Lesson 1, 2 &3

View Set

Chapter 3, Physical state of matter

View Set