DOT

Which bulk packaging type requires QT and NQT markings near the specification plate to indicate if it is constructed of quenched and tempered steel or not?

Cargo tanks

Which of these materials would be required to display the identification number along with the proper shipping name on non-bulk packaging that only contained that single material?

Furan

Which of the statements listed below is NOT part of the requirement for placing the emergency response telephone number on the shipping paper?

The emergency response telephone number is entered on the backside of the shipping document in the primary language of the carrier. The emergency number is not required to be that of the activity or agency capable of providing detailed information concerning the hazardous material being shipped, but they must be in contact with someone who can provide that information

If more than _______________ of the identification number markings on placards, orange panels, or white square-on-point display configurations are lost, damaged, or destroyed during transportation, the carrier shall replace all the missing or damaged identification numbers as soon as practicable

one

Except for hazardous materials that are ____________________, you may use a label conforming to the specifications in the UN Recommendations in place of a corresponding label that conforms to the requirements of the HMR

poisonous by inhalation

When is the Marine Pollutant marking required on a container?

A. On a non-bulk package containing a Marine Pollutant when being transported by vessel in association with the proper shipping name. B. On a bulk package with a capacity of less than 1,000 gallons on opposing sides or ends of the container being shipped by vessel transport. C. On a bulk container with a capacity greater than 1,000 gallons on all four sides being shipped by vessel transport. D. All of the above require a Marine Pollutant marking

The A & Z Chemical Company of Grand Rapids, Michigan, is shipping to the Martin Fabricating Company of St. Louis, MO, 50 kg of Benzoyl chloride, a Class 8 material in a metal drum. The material is listed in Appendix A of the HMT as a hazardous substance. The shipment will be transported by highway and will be transferred from one motor carrier to a 2nd carrier. Which of these markings are NOT required on this container of Benzoyl chloride?

RQ, Benzoyl chloride

A consumer commodity prepared for air shipment in a non-bulk packaging must display the ______________________ marking

RQ,ORM-D-Air

______________________ are not required on packaging that contains only ORM-D materials or limited quantities

Identification Numbers

You are asked to inspect a non-bulk package of a hazardous material being shipped as a limited quantity. Which of these marking requirements is NOT required on this package?

Identification number

The Marine Pollutant mark is required to be affixed to these packagings?

-On a combination packaging containing 5.5 kg of Dipentene in an inner packaging prepared for shipment overseas via vessel transportation. -On a portable tank containing Chlorine being prepared for shipment overseas via vessel transportation. -On a freight container containing a quantity of Nickel cyanide in excess of 5,000 kg, being loaded for vessel transport

Unless excepted, each package of hazardous material must be marked with

Identification number Proper shipping name

Which of these markings/placards is NOT acceptable for use on a bulk package of Petroleum gases, liquefied?

1075 /2

Labeling is required for all but one of these packages or containment devices. Which one of these packages or containment devices does NOT require a hazard label?

A freight container of more than 18 cubic meters containing a package for which labels are required, as long as the container is placarded

Marking refers to the placing of information on the outside of the hazardous materials packaging, to include such items as the ___________________________________.

A. proper shipping name of the hazardous material B. identification number C. orientation arrows, consignee's name or consignor's name D. all of the above

The identification number 1203 is not required to be displayed on a cargo tank containing only this material, if the cargo tank is marked with the name of this material on each side and rear. What is the name of this material? _______________

Gasoline

Which package of hazardous material listed here must have this marking affixed to it if shipped by air transportation?

Consumer commodity

Identification numbers are permitted to be displayed on a placard with which of the following types of materials?

Corrosive

A Class 3, PGI substance that also meets the definition of a Class 8, PGII substance must be labeled

FLAMMABLE LIQUID and CORROSIVE

What is the primary hazard label listed in Column 6 of the HMT for Petroleum gases, liquefied?

Flammable Gas 2.1

A 4.5-liter package of Methyl fluoride being transported via air transportation must contain which of these hazard labels?

Flammable Gas and Cargo Aircraft Only

The ______________________ mark must be placed in association with the hazard warning labels or the proper shipping name for non-bulk packaging containing materials listed in Appendix B to §172.101 and shipped by vessel transport

Marine Pollutant

_____________ refers to placing a warning notice specific to the hazard class and/or the handling precautions for the material on the outside of the shipping package or shipping container

Marking

Which one of these international bodies' regulations does not provide an acceptable alternative to the labeling requirements set forth in the HMR for domestic shipments of hazardous materials?

NATO Protocols on Overseas Shipping

Which of the following abbreviations may be used as part of a proper shipping description marking?

ORM-D

A consumer commodity prepared for air shipment in a non-bulk packaging must display the ______________________ marking

ORM-D-Air

The Marine Pollutant mark is NOT required to be affixed to which one of these packagings?

On a combination packaging containing 300 grams of Copper cyanide in an inner packaging.

When are package orientation arrows required as part of the labeling on a container?

On any non-bulk container having inner packages that contain liquid hazardous materials

A package of hazardous material that meets the criteria of poisonous by inhalation must be marked

PGIII

A package of Arsine must be labeled with which labels?

POISON INHALATION HAZARD and FLAMMABLE GAS

A fiberboard box containing a 1.0 liter bottle of Dioxane must be marked with _________________________ on two opposite vertical sides of the package

Package orientation arrows

Which class 7 radioactive materials hazard class label should be affixed to a radioactive materials package with a TI of 0.06 and a maximum radiation level of 35 mrem/h?

RADIOACTIVE YELLOW-II

A non-bulk package containing a hazardous substance that meets or exceeds the reportable quantity per pack must be marked with the letters __________ on the package in association with the proper shipping name.

RQ

The letters ______________________ must be marked on a package containing a hazardous substance in association with the proper shipping name.

RQ

A package containing which of these hazardous materials would require a primary hazard label of 'Dangerous When Wet'?

Rubidium

Which of the categories of hazardous materials listed here are generally required to have a shipping paper entry prepared for it prior to it being released for highway transportation?

Shipments with a letter D in column 1 of the HMT

Which of these labels is NOT an acceptable label for a package containing a quantity of Acrylamide?

TOXIC

Which one of these four statements is NOT a general marking requirement for hazardous materials?

The marking must be displayed on a white or black background.

The labels required by the HMR are normally used for domestic shipments, but may be used for international shipments in most cases. Several international organizations prescribe labeling requirements that may be used in addition to or in place of domestic labels. Which international organization conforms to the requirements for shipments of hazardous materials being transported from Canada?

Transportation of Dangerous Goods (TDG)

You are asked to inspect a non-bulk package of a hazardous material being shipped as a limited quantity.

U.S. DOT Exemption Information, if applicable Technical name (if applicable) Consignee's or Consignor's name and address

Required package markings for hazardous materials must be

Unobscured by labels or attachments

Which one of these four statements is NOT correct concerning the general marking requirements for bulk packagings of hazardous materials?

You may remove markings from a tank car marked with a proper shipping name, common name or identification number when it is emptied, and only contains residue of hazardous materials

Which one of these four statements is NOT correct concerning the general marking requirements for bulk packagings of hazardous materials?

You may remove markings from a tank car marked with a proper shipping name, common name or identification number when it is emptied, and only contains residue of hazardous materials.

Marking the ORM-D designation in a rectangle following or below the proper shipping name on a nonbulk package _______________ that the package is in proper condition for transportation. The marking certification does not take the place of the shipping paper certification, if required.

certifies

A hazard label is NOT required for which of these types of package?

compressed gas cylinder permanently mounted in or on a transport vehicle

A shipping paper or shipping document may be presented in any format as long as it contains all required information presented in the correct sequence. Only in the case of a _________________________ is a specific format required.

hazardous waste

A package containing an amount of Mercury compounds, solids, n.o.s., UN2025, PGIII, requiring hazard labels can be labeled with all but one of these labels. Which of these labels is NOT authorized to be used?

inhalation hazard 2

When two or more different primary and subsidiary hazard labels are required, they must be displayed

next to each other, but not more than 6 inches apart

An identification number may be displayed only on a placard corresponding to the _______________ hazard class of the hazardous material

primary

For a Combustible placard used to display an identification number, the entire background below the white background for the ID number must be _______________ during transportation by _______________.

white, and rail,

Affixing a hazard class label to a tag attached to the hazardous materials package is NOT permissible in which of these situations?

with a package containing a radioactive material

When displaying the primary and subsidiary hazard labels for Flammable liquids, toxic, n.o.s., 3, UN1992, PGII - How far apart may the Class 3 and Div. 6.1 labels be placed?

within 150 mm (6 inches) of one another