Final Exam
A company is deploying a wireless network in the distribution facility in a Boston suburb. The warehouse is quite large and it requires multiple access points to be used. Because some of the company devices still operate at 2.4GHz, the network administrator decides to deploy the 802.11g standard. Which channel assignments on the multiple access points will make sure that the wireless channels are not overlapping?
11 am ende
Refer to the exhibit. Which static route would an IT technician enter to create a backup route to the 172.16.1.0 network that is only used if the primary RIP learned route fails?
121 am Ende
Match the DHCP message types to the order of the DHCPv4 process. (Not all options are used.)
1=DISCOVER, 2=OFFER, 3=REQUEST, 4=PACK
Match the step number to the sequence of stages that occur during the HSRP failover process. (Not all options are used.)
1=fails am ende, 2=hello drinnen, 3=role drinnen, 4=MAC drinnen
Refer to the exhibit. What is the metric to forward a data packet with the IPv6 destination address 2001:DB8:ACAD:E:240:BFF:FED4:9DD2?
2682112
An administrator is trying to remove configurations from a switch. After using the command erase startup-config and reloading the switch, the administrator finds that VLANs 10 and 100 still exist on the switch. Why were these VLANs not removed?
Because these VLANs are stored in a file that is called vlan.dat that is located in flash memory, this file must be manually deleted.
What is a secure configuration option for remote access to a network device?
Configure SSH.
What method of wireless authentication is dependent on a RADIUS authentication server?
Enterprise am ende
Refer to the exhibit. In addition to static routes directing traffic to networks 10.10.0.0/16 and 10.20.0.0/16, Router HQ is also configured with the following command: ip route 0.0.0.0 0.0.0.0 serial 0/1/1 What is the purpose of this command?
Internet am Ende
Refer to the exhibit. Which destination MAC address is used when frames are sent from the workstation to the default gateway?
MAC address of the virtual router
A cybersecurity analyst is using the macof tool to evaluate configurations of switches deployed in the backbone network of an organization. Which type of LAN attack is the analyst targeting during this evaluation?
MAC am Anfang
Refer to the exhibit. A network administrator has added a new subnet to the network and needs hosts on that subnet to receive IPv4 addresses from the DHCPv4 server. What two commands will allow hosts on the new subnet to receive addresses from the DHCP4 server? (Choose two.)
R1 mit 250 am ende, R1 mit G0/0 am ende
Refer to the exhibit. After attempting to enter the configuration that is shown in router RTA, an administrator receives an error and users on VLAN 20 report that they are unable to reach users on VLAN 30. What is causing the problem?
RTA am Anfang
Refer to the exhibit. Which route was configured as a static route to a specific network using the next-hop address?
S 10.17.2.0/24 [1/0] via 10.16.2.2
What are three techniques for mitigating VLAN attacks? (Choose three.)
S,D,Enable trunking
Which method of IPv6 prefix assignment relies on the prefix contained in RA messages?
SLAAC
Refer to the exhibit. A network administrator has connected two switches together using EtherChannel technology. If STP is running, what will be the end result?
STP will block one of the redundant links.
Which two types of spanning tree protocols can cause suboptimal traffic flows because they assume only one spanning-tree instance for the entire bridged network? (Choose two.)
STP, RSTP
Refer to the exhibit. How is a frame sent from PCA forwarded to PCC if the MAC address table on switch SW1 is empty?
SW1 floods the frame on all ports on SW1, excluding the port through which the frame entered the switch.
Refer to the exhibit. Host A has sent a packet to host B. What will be the source MAC and IP addresses on the packet when it arrives at host B?
Source MAC: 00E0.FE91.7799Source IP: 10.1.1.10
Refer to the exhibit. If the IP addresses of the default gateway router and the DNS server are correct, what is the configuration problem?
The IP address of the default gateway router is not contained in the excluded address list.
Which statement describes a result after multiple Cisco LAN switches are interconnected?
The broadcast
After a host has generated an IPv6 address by using the DHCPv6 or SLAAC process, how does the host verify that the address is unique and therefore usable?
The host sends an ICMPv6 neighbor solicitation message to the DHCP or SLAAC-learned address and if no neighbor advertisement is returned, the address is considered unique.
Refer to the exhibit. Which trunk link will not forward any traffic after the root bridge election process is complete?
Trunk2
On a Cisco 3504 WLC Summary page ( Advanced > Summary ), which tab allows a network administrator to configure a particular WLAN with a WPA2 policy?
WLANs
Which wireless encryption method is the most secure?
WPA2 with AES
Match the forwarding characteristic to its type. (Not all options are used.)
a=cut, e=store, address am ende=cut, frame am ende=store, m=cut, o=store
Refer to the exhibit. What are the possible port roles for ports A, B, C, and D in this RSTP-enabled network?
alternate, designated, root, root
A network administrator is configuring a WLAN. Why would the administrator disable the broadcast feature for the SSID?
area am Ende
A network administrator is preparing the implementation of Rapid PVST+ on a production network. How are the Rapid PVST+ link types determined on the switch interfaces?
automatically am ende
A static route has been configured on a router. However, the destination network no longer exists. What should an administrator do to remove the static route from the routing table?
command am ende
A new Layer 3 switch is connected to a router and is being configured for interVLAN routing. What are three of the five steps required for the configuration? (Choose three.) *
creating Plans, protocol am ende, assigning am anfang
What action takes place when the source MAC address of a frame entering a switch appears in the MAC address table associated with a different port?
current port am ende
Match the link state to the interface and protocol status. (Not all options are used.)
d=a, Layer 1=d/d, Layer 2=u/d, o=u/u
Match the description to the correct VLAN type. (Not all options are used.)
da=co, de=all, n=ca, m=an
In which situation would a technician use the show interfaces switch command?
host am ende
Refer to the exhibit. A network administrator is configuring inter-VLAN routing on a network. For now, only one VLAN is being used, but more will be added soon. What is the missing parameter that is shown as the highlighted question mark in the graphic?
identifies the VLAN number
Refer to the exhibit. R1 has been configured as shown. However, PC1 is not able to receive an IPv4 address. What is the problem?
interface am ende
Which two statements are characteristics of routed ports on a multilayer switch? (Choose two.)
layers am ende, VLAN am ende
A network administrator uses the spanning-tree portfast bpduguard default global configuration command to enable BPDU guard on a switch. However, BPDU guard is not activated on all access ports. What is the cause of the issue?
ports am ende
Compared with dynamic routes, what are two advantages of using static routes on a router? (Choose two.)
resources am ende, security am ende
A network administrator configures the port security feature on a switch. The security policy specifies that each access port should allow up to two MAC addresses. When the maximum number of MAC addresses is reached, a frame with the unknown source MAC address is dropped and a notification is sent to the syslog server. Which security violation mode should be configured for each access port?
restrict
Which network attack is mitigated by enabling BPDU guard?
rogue am Anfang
An administrator notices that large numbers of packets are being dropped on one of the branch routers. What should be done or checked?
route am ende
What network attack seeks to create a DoS for clients by preventing them from being able to obtain a DHCP lease?
starvation am ende
Which information does a switch use to populate the MAC address table?
the source MAC address and the incoming port
After attaching four PCs to the switch ports, configuring the SSID and setting authentication properties for a small office network, a technician successfully tests the connectivity of all PCs that are connected to the switch and WLAN. A firewall is then configured on the device prior to connecting it to the Internet. What type of network device includes all of the described features?
wireless router
