Hunter's ED

List six types of firearm actions.

I. Bolt Action II. Lever Action III. Pump Action IV. Semi-Automatic V. Break Action IV. Revolting Action

label the indication parts of the rifle and shotgun ammunition:

I. Bullet II. Shot III. Gunpowder IV. Primer

Label the indicated parts of a bolt-action rifle:

I. Butt II. Sight III. trigger IV. Muzzle

List the most common shotgun chokes.

I. Cylinder Choke II. Improved Cylinder Choke III. Modified Choke IV. Full Choke

Name three hunting-related projects for which the Federal Aid in Wildlife Restoration Act provides funding.

I. Selection II. Restoration III. Improvement

the component in ammunition that ignites the gunpowder when struck by the the firing pin is the ___________.

Primer

The design feature that causes a bullet to spiral, which increases accuracy and distance, is called ________________.

Rifling

Which of these is not a source of hunter education funding? A. State highway departments B. State wildlife agencies C. International Hunter Education Association D. U.S. Fish & Wildlife Service

A. State highway departments

Name three behaviors of a responsible hunter.

Attitude, Skills, and Knowledge

Why is it important to keep shotshells separated by size? A. Once mixed, it is impossible to separate them accurately. B. A smaller gauge can slip past the chamber of a larger gauge gun and result in serious personal injury. C. A 12-gauge shotshell can be chamber into a 20-gauge shotgun and result in serious personal injury. D. Non of the above.

B. A smaller gauge can slip past the chamber of a larger gauge gun and result in serious personal injury.

A safety is located around the receiver of the firearm and ______. A. ensures that the firearm can never be accidental fired. B. is a device that blocks the action to prevent accidental firing. C. is always located either inside or on the trigger guard. D. all of the above.

B. is a device that blocks the action to prevent accidental firing.

A primary objective of hunter education program is to? A. Give every hunter the same degree of skill and knowledge. B. Ensure that everyone enjoys hunting and has an opportunity to hunt. C. Produce knowledgeable, responsible, and involved hunter. D. Non of the above.

C. Produce knowledgeable, responsible, and involved hunter.

The three basic parts of a modern firearm are______. A. cartridge, stock, and barrel. B. action, stock, and barrel. C. Stock, trigger, and action D. Barrel, Chamber, and muzzle.

C. Stock, trigger, and action

The action of a firearm is made up of parts that __________. A. block the trigger or hammer to prevent accidental firing. B. hold ammunition before it's loaded into the chamber. C. load, unload, fire, and eject the cartridge or shot shell. D. serve as the handle of the firearm.

C. load, unload, fire, and eject the cartridge or shot shell.

When referring to firearms, "caliber" is ____________. A. the length of the barrel of the rifle or handgun. B. always expressed in hundredths of an inch. C. used to describe the size of a rifle bore and the size of cartridges designed for different bores. D. all of the above.

C. used to describe the size of a rifle bore and the size of cartridges designed for different bores.

Steel shot is _____. A. lighter than lead shot, reducing velocity and distance. B. harder than lead, keeping the pattern tighter. C. non-toxic, unlike lead shot that can be toxic to waterfowl. D. all of the above.

D. all of the above.

Knowing your firearm's range is critical-- it allows you to ______________________. A. determine whether or not you're able to make a clean Kill. B. make accurate shots at any distance as long as they are within your firearm's range. C. know at what distances your firearm could cause injury. D. both a. and c.

D. both a. and c.

Good marksmanship is __________. A. being able to hit your target at least 50% of the time. B. correctly marking your target. C. being a good sport if you miss your target. D. hitting your target accurately and consistently.

D. hitting your target accurately and consistently

___________________ is a measure related to the diameter of the bore and the size of the shotshells designed for that bore.

Gauge

The most accurate sight for a firearm is the ___________.

Telescopic

Sight alignment is __________________________________________________________ ___________________________________________________________________________________.

The process of lining up rear and front sights.

Firearms should be stored __________, in a ________ location, and separate from ___________.

Unloaded Locked Ammunition

You should use only ammunition that exactly matches the caliber or gauge specifications marked on the ___________ of your firearm.

barrel