INEN 4316 Exam 2
In the US, standard AC circuits cycle how many times per second? 60 110 220 115
A
Risk analysis is normally associated with: Insurance and investments Adjustment and assessment Training and education Evaluation and review
A
From the following, select the most important component of emergency preparation. Right to Know Planning Cost OSHA standards
B
Hard hats are tested to withstand how many foot-pounds of impact? 10 40 20 15
B
M.Selye's three stages of the human stress response are which of the following? Overload, temper, and reaction Alarm, resistance, and exhaustion Resistance, reaction, and alarm Alertness, resistance, and alarm
B
OSHA requires employers to deal with the problem of training workers who do not speak English by: Providing English as a Second Language classes on site Providing training in a language they understand Requiring closer supervision None of the above
B
Ohm's law is stated as: W=VI V=IR W=VR I=RW
B
One of the best ways to promote safety in the workplace is: After-the-fact reports Ongoing safety training programs Increase production rates Reduce production rates
B
The best policy regarding stress is which of the following? Learn to do away with all stress Learn to adapt to it Avoid all stressful situations Learn to adapt to being sick because of stress
B
The weight of a flammable vapor compared to air is called which of the following? Lower flammable limit Vapor density PEL Upper flammable limit
B
What is the name for interconnected power strips? Multi-strips Daisy chains Extension strips None of the above
B
What is the purpose of safety and health promotion programs? Keeps employees, supervisors, and managers focused on safety and health issues To remind people to think safety first It encompass safety on the job as well as off All of the above
B
When heat gain from any source or sources is more than the body can compensate for by sweating, the result is: Internal heat gain Heat stress Body heat Convection heat gain
B
"Only trained and certified personnel may operate forklifts" is an example of which of the following? Safety policy OSHA standard Safety rule None of the above
C
Which of the following is not one of the primary causes of falls? A foreign object on the walking surface Slippery surfaces Fall prevention component An individual's impaired physical condition
C
Which of the following would not be considered hot work? Brazing Soldering Pressure washing Chipping
C
Which type of hard hat reduces the force of a blow to the top of the head, a lateral blow, and an off-center blow? Class C Type I Type II Class G
C
Critical burns are second-degree burns covering what percentage of BSA (Body Surface Area)? 10% 5% 15% 30%
D
Enhancements in which key areas continue to enable ever-increasing levels of globalization? Nature of work Transportation Communication All of the above
D
Fires are classified according to their properties, which relate to the nature of the fuel. What class of fire has a metal fuel? Class A Class B Class C Class D
D
Power is measured in: Resistance Amps Ohms Watts
D
A condition or combination of conditions that, if left uncorrected, might lead to an accident, illness, or property damage is which of the following? Hazard Emergency Adjustment Experience
A
An optical device that shuts down the machine any time the light field is broken is which of the following? Photoelectric device Electromechanical device Pullback device Radio-frequency device
A
The advent of computers has brought about safety and health problems concerned with which of the following? Video display terminals Work envelope areas Industrial work stress Psychosocial stressors
A
When a machine is being operated without the safeguard, which of the following actions should be taken? Stop machine immediately Report to management next day Show caution while machine is operating Discuss at next safety meeting.
A
When developing safety rules and regulations: Minimize the number of rules to the extent possible Reduce cost as much as possible The more rules, the better the safety policy Make rules complex enough that the employees will not understand
A
Which of the following best describes warning signs in the workplace? Orange with letters or symbols in a contrasting color Red with letters or symbols in a contrasting color. Fluorescent with letters or symbols in a contrasting color. None of the above
A
Which of the following defines a safety-first corporate culture? Beliefs, values, and attitudes shared and accepted Violent acts, behavior, or threats that occur in the workplace Human reaction to threatening situations at work None of the above
A
Which of the following is a non-mandatory test manufacturers of hard hats (work helmets) may use to rate their products? Reverse donning Beta testing Object drop test Low visibility test
A
Which of the following is not a strategy for stress reduction? Increasing employees' hourly pay rate Providing EAP benefits Giving employees up-to-date information about stress on a regular basis Giving employees current and accurate job descriptions
A
Broad-based efforts at automating mechanical processes and systems began when? 1950s 1960s 1970s 1980s
B
Variance control, boundary location, work group organization, management support, design process, and quality of work life are components of: Social pathological theory Sociotechnical system theory Polarization of work theory Quality of work theory
B
When should human error analysis be used? After-the-facts process Before hazards cause accidents Only as a last resort None of the above
B
Which of the following are products of combustion? Solids, vapors, oxidizers, and hydrogen Gases, flame, heat, and smoke Oxygen, hydrogen, and vapor Vapors, oxidizers, and fuel
B
Which of the following behaviors is NOT typically something that should be watched for and reported in the workplace? Stalking of an employee An employee who shows up for work late three days in a row Defacing of the employer's property Bullying of an employee
B
Which of the following best describes what OSHA provides for hazards of temperature extremes? A new standard Guidelines Specific fines Non-monetary citations
B
Which of the following is a potential harmful effect of the chemical Methylbromide? Tissue damage Blisters Ulceration Eye burns
B
Which of the following might be included in an off-the-job safety training program? List of applicable OSHA standards Drowning prevention Forklift operation None of the above
B
Which of the following situations may cause a vacuum? Shock waves Pressures below the atmospheric level High-temperature water Ultrasonic waves
B
Which of the following statements should managers say to employees? Do not comply with the safety and health rules. Safety is a priority here. Administration is exempt from complying to regulations and procedures. Do as I say, not as I do.
B
Which of the following would be used to keep employees up to date concerning first aid information? Vacancy announcement First aid fact sheet Employee evaluation All of the above
B
Which type of guard shuts down the machine when the guard is not securely in place? Fixed Interlock Adjustable Point
B
A hazmat security plan should have: Personal security Physical security Both A & B None of the above
C
A pathological, and generally undesirable, human reaction to psychological, social, occupational, or environmental stimuli is which of the following? Heart disease Nervous disorder Stress Back problems
C
A tree is a common natural path for what type of electrical hazard? Arc Insulation failure Lightning Spark
C
Atmospheric pressure is usually measured using a: Pressure vessel Ultrasound meter Barometer Vacuum gauge
C
Radiant heat is the result of: Conduction Convection Electromagnetic nonionizing energy Acclimatization
C
Ten broad steps are needed to establish a safety-first corporate culture. Which of the following are some of those steps? Assess Plan Both A & B Survey
C
The National Fire Protection Association has devised a system, NFPA 704, for quick identification of hazards presented when substances burn. Which color would be used to identify reactivity? Red Blue Yellow White
C
The National Safety Council recommends all the following do's when using a ladder except: Do set the ladder's base on a firm, level surface Do limit a ladder to one person at a time Do lean the ladder against a fragile, slippery, or unstable surface Do face the ladder when climbing up or down
C
To prevent workers from falling onto or into machines, OSHA requires employers to provide what type of protection as a minimum? Six-foot chain link fences Rope barriers Guardrails and toeboards Yellow or orange barrier tape
C
What are the three elements required for starting and sustaining fire? Heat, smoke, and fire Smoke, fuel, and heat Fuel, heat, and oxygen Oxygen, fire, and smoke
C
Which of the following agencies would be the most appropriate to obtain first aid training materials from? OSHA EPA National Safety Council None of the above
C
Which of the following conditions is most associated with robots in the workplace? Neck fatigue Eye strain Work envelope injuries Work stress
C
Which of the following is NOT a recommended strategy for enhancing the safety of automated vehicles in the workplace? Clearly mark their paths Use cone barriers Equip vehicles with loud sirens Equip vehicles with detection systems
C
Which of the following is a practical measure that can be applied to reduce slip and fall hazards in the workplace? Updating the organization's safety plan annually. Conducting an annual review of OSHA standards. Locating absorbents strategically. Maintaining a comprehensive slip and fall prevention program.
C
Which of the following is not an inert gas? Helium Argon Oxygen Neon
C
Which of the following is not included in NFPA 70E? General maintenance requirements Protective devices Training requirements for electrical and electronic engineers Fuses
C
40% of injuries occur in the first year of employment, which of the following areas do most of these injuries occur? Eye-related Foot-related Ear-related Back-related
D
A company's safety policy should convey the following message: A companywide commitment Expectation that employees will work safety The company's commitment includes customers and the community All of the above
D
A safety device used to detect the flow of current to the ground and to open the circuit is: Circuit breaker Fuse Conductor Ground fault interrupter
D
A slip and fall prevention component should have which of the following elements? Employee footwear program Review and acceptance of walkways A policy statement All of the above
D
Assessment instrument used for safety-related aspects of the corporate culture include which of the following: Employees are recognized and rewarded for working safely Safety and health are high priorities in this organization Our organization focuses on product safety for customers All of the above
D
Safety hazards associated with boilers and other pressurized vessels include the following except: Human error Mechanical errors Design errors Proper operator training
D
Select the best method of hazard analysis which uses a graphic model to visually display the analysis process. Failure mode and effects analysis (FMEA) Hazard operability review (HAZOP) Risk analysis Fault tree analysis (FTA)
D
Sources of on the job stress involve all of the following except: Physical working conditions Work overload Personal and family problems Job enrichment
D
The best guard used in a robot's work envelope is which of the following? Photoelectric device Pullback device Electromechanical device Physical barrier
D
The feeling workers have when they are not able to control the work environment is: Meaninglessness Normlessness Mindlessness Powerlessness
D
The result of incomplete combustion of fuel is carbon monoxide, which is Odorless Colorless Deadly gas All of the above
D
The severity of a burn depends on several factors. The most important of these is: Age of victim Location of burn Amount of burned area Depth to which burn penetrates
D
Water vapor, although it is a gas, does not conform to: Boyle's law OSHA standards ASME codes Dalton's law
D
When a body part comes in contact with a sharp edge, which of the following occurs? Crushing Puncturing Shearing Cutting
D
Which of the following groups may respond to an emergency? Medical Fire fighting Security/safety All of the above
D
Which of the following statements is true of off-the-job safety injuries? Off-the-job injuries cost organizations more than $800 per employee each year Off-the-job injuries cause the loss of more than 225 million days of lost production time each year Future lost production time resulting from off-the-job injuries is estimated to exceed 500 million days. All of the above.
D
