ITN 7.0 Module 4-7 Review

What OSI physical layer term describes the capacity at which a medium can carry data?

Bandwidth

When the store-and-forward method of switching is in use, what part of the Ethernet frame is used to perform an error check?

CRC in the trailer

What OSI physical layer term describes the physical medium which uses electrical pulses?

Copper cable

What two devices commonly affect wireless networks?

Cordless phones Microwaves

What OSI physical layer term describes the physical medium that uses the propagation of light?

Fiber Optic

Appropriate use of network media: Copper Cables

Horizontal cabling structure Desktop PCs in an enterprise office

What functions are performed at the MAC sublayer of the OSI data link layer?

Implements a trailer to detect transmission errors. Controls the NIC responsible for sending and receiving data on the physical medium. Provides a mechanism to allow multiple devices to communicate over a shared medium. Integrates various physical technologies. Provides synchronization between source and target nodes.

What is the auto-MDIX feature?

It enables a device to automatically configure an interface to use a straight-through or a crossover cable.

What are two characteristics of fiber-optic cable?

It is not affected by EMI or RFI It is more expensive than UTP cabling is

Statements that describe the services provided by the data link layer

It manages the access of frames to the network media. It packages various Layer 3 PDUs into a frame format that is compatible with the network interface.

What OSI physical layer term describes the amount of time, including delays, for data to travel from one point to another?

Latency

What three items are contained in an Ethernet header and trailer?

Source MAC address Destination MAC address Error-checking information

Which switching method uses the CRC value in a frame?

Store-and-forward

A network administrator is measuring the transfer of bits across the company backbone for a mission critical financial application. The administrator notices that the network throughput appears lower than the bandwidth expected. Which three factors could influence the differences in throughput?

The amount of traffic that is currently crossing the network The type of traffic that is crossing the network. The latency that is created by the number of network devices that the data is crossing

What is the auto-MDIX feature on a switch?

The automatic configuration of an interface for a straight-through or a crossover Ethernet cable connection

What are two actions performed by a Cisco switch?

Using the source MAC addresses of frames to build and maintain a MAC address table Utilizing the MAC address table to forward frames via the destination MAC address

A multicast MAC address

01-00-5E-00-00-03 (Multicast MAC addresses begin with the special value of 01-00-5E.)

What is contained in the trailer of a data-link frame?

Error detection

What are three ways that media access control is used in networking?

Ethernet utilizes CSMA/CD. Media access control provides placement of data frames onto the media. Data link layer protocols define the rules for access to different media.

Which switching method has the lowest level of latency?

Fast-forward

What are two examples of the cut-through switching method?

Fast-forward switching Fragment-free switching

Which two fields or features does Ethernet examine to determine if a received frame is passed to the data link layer or discarded by the NIC?

Frame Check Sequence Minimum frame size

Which advantage does the store-and-forward switching method have compared with the cut-through switching method?

Frame error checking

Which media communication type does not require media arbitration in the data link layer?

Full-duplex

What OSI physical layer term describes the measure of usable data transferred over a given period of time?

Goodput

What makes fiber preferable to copper cabling for interconnecting buildings?

Greater distances per cable run Limited susceptibility to EMI/RFI Greater bandwidth potential

Appropriate use of network media: Wireless

Guest access in a coffee shop Waiting rooms in a hospital

What action will occur if a switch receives a frame with the destination MAC address 01:00:5E:00:00:D9?

The switch forwards it out all ports except the ingress port.

What action will occur if a switch receives a frame with the destination MAC address FF:FF:FF:FF:FF:FF?

The switch forwards it out all ports except the ingress port.

What action will occur if a switch receives a frame and does have the source MAC address in the MAC table?

The switch refreshes the timer on that entry.

What type of communication rule would best describe CSMA/CD?

Access method

What OSI physical layer term describes the physical medium for microwave transmissions?

Air

Statement about the CSMA/CD access method that is used in Ethernet

All network devices must listen before transmitting.

Appropriate use of network media: Fiber Optic

Backbone cabling in an enterprise Long-haul networks

What is a primary role of the Physical layer in transmitting data on the network?

Create the signals that represent the bits in each frame on to the media

In addition to the cable length, what two factors could interfere with the communication carried over UTP cables?

Crosstalk Electromagnetic interference

What functions are performed at the LLC sublayer of the OSI data link layer?

Enables IPv4 and IPv6 to utilize the same network interface and media. Places information in the frame that identifies which network layer protocol is being used for the frame. Adds Layer 2 control information to network protocol data.

Describes an extended star topology

End devices connect to a central intermediate device, which in turn connects to other central intermediate devices.

What is one advantage of using the cut-through switching method instead of the store-and-forward switching method?

Has a lower latency appropriate for high-performance computing applications​

Which three basic parts are common to all frame types supported by the data link layer?

Header Data Trailer

A characteristic of the LLC sublayer

It places information in the frame allowing multiple Layer 3 protocols to use the same network interface and media.

Which two statements describe features or functions of the logical link control sublayer in Ethernet standards?

Logical link control is implemented in software. The data link layer uses LLC to communicate with the upper layers of the protocol suite.

What does the term "attenuation" mean in data communication?

Loss of signal strength as distance increases

What OSI physical layer term describes the process by which one wave modifies another wave?

Modulation

What action will occur if a host receives a frame with a destination MAC address of FF:FF:FF:FF:FF:FF?

The host will process the frame.

A Layer 2 switch is used to switch incoming frames from a 1000BASE-T port to a port connected to a 100Base-T network. Which method of memory buffering would work best for this task?

Shared memory buffering

Which frame forwarding method receives the entire frame and performs a CRC check to detect errors before forwarding the frame?

Store-and-forward switching

What action will occur if a host receives a frame with a destination MAC address it does not recognize?

The host will discard the frame.

A network administrator is connecting two modern switches using a straight-through cable. The switches are new and have never been configured. Which three statements are correct about the final result of the connection?

The link between the switches will work at the fastest speed that is supported by both switches. The link between switches will work as full-duplex. The auto-MDIX feature will configure the interfaces eliminating the need for a crossover cable.

With the use of unshielded twisted-pair copper wire in a network, what causes crosstalk within the cable pairs?

The magnetic field around the adjacent pairs of wires

During the encapsulation process, what occurs at the data link layer for a PC connected to an Ethernet network?

The physical address is added.

A characteristic of the frame header fields of the data link layer

They vary depending on protocols

What OSI physical layer term describes the measure of the transfer of bits across a medium over a given period of time?

Throughput

What is the purpose of the FCS field in a frame?

To determine if errors occurred in the transmission and reception

What is the function of the CRC value that is found in the FCS field of a frame?

To verify the integrity of the received frame

A network team is comparing physical WAN topologies for connecting remote sites to a headquarters building. Which topology provides high availability and connects some, but not all, remote sites?

partial mesh