Module 5 Introduction to Computer Hardware
Information stored is lost when the the computer is turned off.
RAM RAM information disappears when the computer is turned off.
Temporary form of memory.
RAM RAM is the temporary form of memory.
Additional can be purchased for the computer.
RAM When you purchase a computer, you can opt to include additional RAM.
Stores information as bits.
RAM and ROM both store information as bits.
Is used to store programs.
RAM and ROM both store programs. RAM and ROM both store programs.
RAM
RAM temporarily stores data before it is processed and sent to your screen or printer. RAM storage is in the 1-8 GB range.
It holds the instructions the computer needs to boot.
ROM ROM holds the instructions the computer needs to boot up.
What is the difference between a handheld and a desktop?
A desktop has less memory and storage space.
desktop
A desktop is physically able to store more RAM and CPU than a laptop and handheld.
Which of the following best describes a docking station and its use?
A docking station allows a laptop or tablet to function like a desktop unit.
laptop
A laptop has greater capability than a handheld but a lesser capability than a desktop.
ALU
ALU does the actual processing of the data.
BIOS ROM
BIOS ROM is stored in the ROM chip on the motherboard.
A collection of wires, cables, optical fiber, or printed circuits that allow multiple hardware components to communicate with each other.
Bus
Executes instructions and commands computer components
CPU
Although the tablet computer looks different from the desktop and laptop, it largely contains the same internal components that allow it to work. However, some of the components inside of a tablet computer may be difficult to identify because of their miniaturization. Which of the following lists is composed of components that must be part of the internal workings of the tablet computer pictured above?
CPU, hard drive, memory, power source. All of these components are necessary for any type of computer.
Which of the following statements describes the main function of computer memory?
Computer memory facilitates the execution of programs by storing both the program and the data that is being used by a program.
What device does not have peripherals permanentaly attached to the system unit?
Desktop A desktop's monitor and keyboard are not permanently attached to the system unit.
Read-Only Memory (ROM)
Nonvolatile ROM memory is a form of permanent storage for instructions that the computer needs to boot up or start.
Identify the categories of computers according to their components and capabilities.
Desktop computers are designed for regular use in one physical location. Laptop computers are lightweight and portable. Handheld computers come in a variety of forms, including tablets, smartphones, and MP3 players.
What will allow the notebook or tablet peripherals to function like a desktop?
Docking station
Expansion cards
Expansion cards, like a sound card or graphics card, are plugged into expansion slots and enhance the performance of a computer.
What is the measurement unit used to identify "Clock Speed" on today's computers?
GHz stands for gigahertz and represents billions of processes per second.
What will store data even when the computer is turned off but may lose data and should be backed up?
Hard drive The hard drive will store data when the computer is turned off but may lose data.
Contains peripheral devices used for input, output, and long-term storage
I/O Subsystem
Identify components of computer hardware.
In the case of hardware there are a multitude of components that, when combined and each performing their individual task, make up what we think of as a computer or hardware. This can include the CPU, memory chips, storage devices, keyboards and printers, among others. The CPU is the central processing unit of the computer which is responsible for executing instructions and managing other computer components. The CPU is the central processing unit of the computer which is responsible for executing instructions and managing other computer components. The CPU is the central processing unit of the computer which is responsible for executing instructions and managing other computer components. The Bus can have many wires, cables, or printed circuits that can transmit bits of information. These bits can be combined to create more complex data.
Stores programs being executed and data that the programs use
Memory
Which peripheral device that was previously only an output device became both an input and output device with the advent of the tablet computer?
Monitor Correct. The screen of a tablet is used for output and input (touch).
Which input peripherals are now integrated in the laptop?
Mouse, keyboard, and webcam
Hard Drive
Nonvolatile Correct. The purpose of a hard drive is to store data even when the computer is turned off. However, hard drives can develop problems involving the loss of data and should therefore be backed up.
Differentiate between motherboard components, their purposes, and properties.
ROM holds the instructions the computer needs to boot up. RAM information disappears when the computer is turned off. RAM and ROM both store programs. When you purchase a computer, you can opt to include additional RAM. RAM and ROM both store information as bits. RAM is the temporary form of memory. RAM temporarily stores data before it is processed and sent to your screen or printer. RAM storage is in the 1-8 GB range RAM memory temporarily stores the information needed by programs to run. Dynamic RAM (DRAM) is also called main memory, and static (SRAM) is also called cache memory. These are the two main forms of RAM. RAM can be read and written to. BIOS ROM is stored in the ROM chip on the motherboard. The hard drive will store data when the computer is turned off but may lose data. RAM memory never stores data when the ROM memory is a form of permanent storage for instructions that the computer needs to boot up or start.power is off and is designed to be the primary work area of a computer when data is being processed. The purpose of a hard drive is to store data even when the computer is turned off. However, hard drives can develop problems involving the loss of data and should therefore be backed up.
RAM computer memory is involved in the following:
Running programs
motherboard
The motherboard or system board directly or indirectly connects all other components and peripherals of the computer.
Indicate which of the following is an accurate statement about the CPU.
The CPU interprets and executes programs.
Which of the following statements best describes the function of the CPU?
The CPU processes programs.
CU
The CU retrieves the instructions and raw input data and sends that data for processing.
Which of the following best describes the I/O subsystem?
The I/O subsystem includes devices such as the printer, keyboard, and monitor.
Which of the following best describes the function of the bus component?
The bus transfers information between computer components or between computers.
Describe the role of a central processing unit (CPU) in a computing environment.
The central processing unit (CPU) or processor is the component in a computer that executes programs.
hard drive
The hard drive allows for long-term storage and data can be saved on the hard drive so when the computer boots, the data is readily available to the user.
hard drive
The hard drive is an electronic component used to store instructions, programs, data, and information for future use.
Motherboard
The motherboard is a thin, flat piece of circuit board, usually green or gold, that directly or indirectly connects all other components and peripherals.
Differentiate between motherboard components, their purposes, and properties.
The motherboard is a thin, flat piece of circuit board, usually green or gold, that directly or indirectly connects all other components and peripherals. The central processing unit (CPU) or processor is the component in a computer that executes programs. The memory module is attached to the motherboard and consists of electronic components that store instructions and data. The input/output connections are used to connect peripheral devices such as a monitor, speakers, projector, etc. The heat sink ensures that the CPU does not overheat and the fan keeps the heat sink cool so it does not overheat.
Identify components of computer hardware.
The motherboard is a thin, flat piece of circuit board, usually green or gold, that directly or indirectly connects all other components and peripherals. The central processing unit (CPU) or processor is the component in a computer that executes programs. The memory module is attached to the motherboard and consists of electronic components that store instructions and data. The input/output connections are used to connect peripheral devices such as a monitor, speakers, projector, etc. The heat sink ensures that the CPU does not overheat and the fan keeps the heat sink cool so it does not overheat. The power supply provides the electrical power needed to make the PC operate. The hard drive is an electronic component used to store instructions, programs, data, and information for future use. Expansion cards, like a sound card or graphics card, are plugged into expansion slots and enhance the performance of a computer.
Which of the following statements best describes differences between a desktop PC system and a notebook/laptop computer?
The peripherals and system unit of a notebook/laptop are sold as a single unit.
power supply
The power supply provides the electrical power needed to make the PC operate.
Which of the following statements describes key differences between the peripheral devices of a standard desktop PC computer and a smartphone?
The smartphone has items normally thought of as peripherals such as keyboard and monitor built in, whereas with the desktop computer the peripherals are largely external.
Describe the role of a central processing unit (CPU) in a computing environment.
The two parts of the CPU do the computer's main work of accepting data and converting it to information. The CPU consists of two parts: the control unit and the arithmetic logic unit. Between the two units raw data input is coordinated and processed into the desired output.
Which of the following statements best describes the role of the CPU in a computing environment?
The two parts of the CPU do the computer's main work of accepting data and converting it to information. The CPU consists of two parts: the control unit and the arithmetic logic unit. Between the two units raw data input is coordinated and processed into the desired output.
The size of these devices, such as the one seen above, in many ways makes them convenient and useful. However, the size also presents some limitations compared to larger devices. Which of the following statements is true concerning these limitations?
They are too small support a large array of peripheral devices. Wearable computers today do not allow for peripheral attachments.
expansion slots
Video cards and wireless network cards are placed in expansion slots connected to the motherboard.
Random Access Memory (RAM)
Volatile RAM memory never stores data when the power is off and is designed to be the primary work area of a computer when data is being processed.
Ports
connect additional input, output, storage, and communication devices.
A certain computer has the following components and capabilities: peripherals include an external flatscreen monitor and an optical disk drive large capacity hard drive What category of computer does it fit into?
desktop
Bays
house CDs and DVDs. They are typically on the front of the system unit for easy access.
Slots
insert wireless-access cards, and other PC cards (such as camera cards).
Responsiveness of a PC will rely on all of the following components except
whether the CPU has a CU.