OSHA 205 Final (29 CFR 1903. 1904, 1910)
For an offhand grinding machine, the work rest must be adjusted to protect the worker. What gap, _____ inches, is acceptable?
0.125
For a mechanical power press, the maximum width of the opening is ______ inches when the distance from the point operation hazard is 1 inch.
0.250
The section of the OSH Act that protects a whistleblower is
11 (c)
An electrical conductor, operating at 590 Volts, and built in 2008, must be elevated at least ______ feet above a residential driveway
15 feet
A safety data sheet has _____ sections
16
You have an oxygen cylinder and an acetylene cylinder stored within 1 foot of each other. Which OSHA reg best describes the correct way to store these cylinders?
1910.253.b
Compressed gas cylinders, stored inside a building and containing fuel gas and oxygen, must be separated by at least ____ feet.
20
A compressed gas cylinder containing nitrogen, must be stored in an upright position. The OSHA regulation that requires that means of storage is
29 CFR 1910.101 (b)
An open work platform that is more than ______ feet above the adjacent floor requires a guard rail system
4
How many risers are allowed in a stair before a stair rail is required?
4 risers
A standard guardrail is installed ______ above the walking or working surface
42 inches
The anchorage for a rope descent system shall be capable of supporting at least ______ in any direction.
5,000 pounds
A room with electrical equipment, rated at more than 600 volts, with exposed live parts on both sides of the work space, must have a headspace that is at least _____
6.25 feet high from the floor
A hearing conservation program is required when employees exposures exceed _____
85 dB(A), based on an 8 hour TWA
What is a horizontal standard?
A horizontal standard is one that applies to many different industries, such as the Hazard Communication standard., 29 CFR 1910.1200.
A confined space is defined as
A space large enough for entry, a space having restrictive entry or exit, a space not designed for continuous human occupancy
Locks used for the LOTO program must be standardized by:
At least one of the following: Color, Shape, or Size
GHS
Globally Harmonized System of Classification and Labeling of Chemicals
an example of a hidden cost after an injury
Lower morale in the workplace
The basic elements of OSHA's Safety and Health Management Guidelines
Management commitment, worksite analysis, hazard prevention, and training
What is the most effective program to establish communication regarding the cost benefit of an effective Safety and Health Management System?
Safety Pays
Ground Fault Circuit Interrupters (GFCI) are required by the National Electrical Code:
When there are wet conditions, on all temporary power circuits, and on portable generators over 5,000 watts
The OSHA permissible exposure limit that is preceded by a "C" means that
a personnel exposure shall at no time exceed the exposure limit
A hole in the floor is defined as ______________
an opening that is 2 inches or more in any dimension
Which of the following is an over current protection device?
circuit protector
List three key aspects of machine hazard
devices, guards, location
A forklift operator must complete an initial training class. The topics for the training are formal instruction, practical training and
evaluation of the operator's performance
Employers must develop a written exposure control plan for lead if
exposures are above PEL
A compressed gas cylinder can be stored anywhere
false
A portable dockboard is not required to be secured in position as long as an attendant is assigned to observe the process.
false
A process safety management system applies to any chemical manufacturer who handles more than 100 gallons of a hazardous chemical.
false
An emergency action plan is not required to written down if your company has more than 10 employees.
false
An extension cord, purchased at WalMart, may be used at a manufacturing facilty and is exempt from OSHA requirements in 29 CFR 1910, Subpart S
false
Bottom-up leadership works best to build safety management.
false
Flammable liquids and combustible liquids have the same boiling point.
false
Personal protective equipment (PPE) is covered in 29 CFR 1910, Subpart P.
false
The purpose of LOTO is to protect employees during normal production operations
false
Treadles may be uncovered for ease of operation.
false
Your employer allows employees to use tools from home. OSHA does not require any safety precaution s because the employee selected the tool.
false
The attendant for the confined space entry only must evaluate the changes to the airborne hazards inside the confined space.
false: An attendant must evaluate all hazards, including airborne hazards, lack of oxygen, [physical hazards, heat stress. They must also verify that hazards outside do not impact the entrants inside, like changing weather conditions. The attendant is in charge.
LPG fuel for a forklift, must be stored and handled in accordance with NFPA 30.
false: NFPA 58
An attendant for PRCS may serve as the attendant for two PRCS simultaneously, as long as the air monitoring results for the two confined spaces are displayed at the same work station.
false: The attendant performs no duties that might interfere with the attendant's primary duty to monitor and protect the authorized entrants.
A warning sign , "Danger - High Voltage - Keep out" is required at the entrance of a room
if the electrical power exceeds 600 volts
29 CFR 1910.1025 defines the safe handling of
lead
An employer's energy control program must include basic components. List three of those components:
locks, tags, and training
The most common exposure to a blood borne pathogen is
needle stick
When is the general duty clause cited by OSHA?
no specific OSHA regulation exists
A qualified person
one who is trained to avoid recognized or potential electrical hazards.
A forklift with a designation D is defined as
similar to G units except they are diesel engine powered instead of gasoline
The pathway for exposure to lead is
skin absorption, ingestion, inhalation
A stair opening is guarded by
standard hand rails
An operator must maintain the speed of the forklift to
the authorized plant speed limit
As required by OSHA's Lockout/Tagout program, the lock and tag should be removed by ____________
the employee who applied the locking device
flash point
the minimum temperature at which a liquid gives off sufficient vapor in the concentration to form an ignitable mixture with air near the surface of the liquid
A cord and plug set does not require a locking device (or tag) if the cord/plug is under the exclusive control of the employee performing the servicing/maintenance.
true
A key factor to addressing hazards is to recognize and communicate them
true
A loss of hearing is recordable on the OSHA 300 log if the loss is more than 25 dB after adjusting for the age of the employee.
true
A portable ladder must extend at least 36 inches above the upper landing surface.
true
A scaffold used in a chemical manufacturing facility must meet the OSHA requirements for the Construction Industry, 29 CFR 1926, Subpart L.
true
Abrasive wheels must be ring tested prior to installation
true
An off-hand with an abrasive wheel must be anchored to prevent walking
true
Asbestos was previously added to car brakes to improve the brakes ability to handle high temperatures
true
Compressed air, at a pressure of less than 30 psi, may be used for cleaning one's person and/or other tools
true
Confined space must be labeled regardless if it is ever entered
true
Housekeeping is important to prevent slips, trips and falls.
true
If the employer expects the employees to fight a fire, training should be provided about how to use a fire extinguisher.
true
PPE shall be provided by the employer at no cost to the employee, except as specifically noted by OSHA.
true
The basis for OSHA's I2P2 program is the guidance from 1989, Management of Safety and Health Guidelines, and a proposed rule in 1998.
true
When charging batteries for a forklift, acid is poured into water.
true
Workplace complexity and the nature of hazards increase the need for a safety & health management program
true
What two tests are required to verify that an abrasive wheel is not cracked?
visual inspection, ring test
The hazard communication program is required to written unless
your company has fewer than 10 employees
