WMS Exam

The diagram shows a typical Third Party Logistics (3PL) structure. Identify the Facility, Company, and User levels, as applicable, in sequential order (that is, the proper label for box 1 is listed 1st in sequence). A. 1=Parent 3PL, 2=Facility 1,3=Facility 2, 4=Company 1, 5=Company 2, 6=Company 3, 7=Company 1 B. 1=Super User, 2=Parent 3PL, 3=Company 1, 4=Facility 1, 5-Facility 2, 6=Facility 3, 7=Facility 4 C. 1=Company 1, 2=Parent 3PL, 3=Company 2, 4=Facility 1, 5=Facility 2, 6=Facility 3, 7=Facility 4 D. 1=Facility 1, 2=Company 1, 3=Company 2, 4=Super User 1, 5=Facility 2, 6=Facility 3, 7=Facility 4

1=Company 1, 2=Parent 3PL, 3=Company 2, 4=Facility 1, 5=Facility 2, 6=Facility 3, 7=Facility 4

Which three interface validations cause the Advance Shipment Notifications (ASN) to fail when uploading to WMS Cloud? (Choose three.) A. ASN Qty and Purchase Qty do not match in WMS Cloud. B. A Purchase Order that is referenced on the ASN doesn't exist in WMS Cloud. C. ASN file has invalid data format. D. ASN data is past the shipping date. E. Purchase Detail line and ASN Detail line do not match in WMS Cloud.

A. ASN Qty and Purchase Qty do not match in WMS Cloud. C. ASN file has invalid data format. E. Purchase Detail line and ASN Detail line do not match in WMS Cloud.

Which five combinations of lot and expiry date are valid scenarios in WMS Cloud? (Choose five.) A. Two IB LPNs of the same item have different lots and the same expiry dates. B. Two IB LPNs of the same item have the same lot and the same expiry date. C. The IB LPNs have an item with the same lot and different expiry dates. D. An item is lot-tracked but not expiry-date-tracked. E. An item is expiry-date-tracked but not lot-tracked. F. Two IB LPNs of the same item have different lots and different expiry dates

A. Two IB LPNs of the same item have different lots and the same expiry dates. B. Two IB LPNs of the same item have the same lot and the same expiry date. C. The IB LPNs have an item with the same lot and different expiry dates. D. An item is lot-tracked but not expiry-date-tracked. E. An item is expiry-date-tracked but not lot-tracked.

The following configuration is set for the Advance Shipment Notification type: 10% Under Receipt Warning, 10% Over Receipt Warning, and 20% Over Receipt error. Which two statements match the condition set if the ASN Qty is 100? (Choose two.) A. When the Operator receives 125 units, the RF screen displays an Over Receipt warning message. B. When the Operator receives 101, the RF screen displays an Over receipt warning message. C. When the Operator receives 110, the RF screen displays an Over Receipt warning message. D. When the Operator receives 89, the RF screen displays an Under Receipt warning message. E. When the Operator receives 130 units, the RF screen displays an Over Receipt error message.

A. When the Operator receives 125 units, the RF screen displays an Over Receipt warning message. B. When the Operator receives 101, the RF screen displays an Over receipt warning message.

Item X has product life as 40 days and % Acceptable as 40%. You are doing receiving for your company via RF and today is Sep. 15th, 2017. The receiving transaction that you use to receive Item X has left the screen parameter allow-rem-exp-override blank, and has the screen parameter allow-inv-exp-override set to on.Identify two valid facts. (Choose two.) A. When you communicate to the RF that the expiry date of Item X is Sep. 30th, 2017, the system will allow you to receive it. B. When you communicate to the RF that the expiry date of Item X is Oct.20th, 2017, and there's an existing inventory of Item X whose expiry date is Oct.4th, the system will allow to receive it. C. When you communicate to the RF that the expiry date of Item X is Oct. 25th, 2017, the system will allow you to receive it. D. When you communicate to the RF that the expiry date of Item X is Oct. 10th, 2017, the system will allow you to receive it. E. Expiry date is the only date value that you can enter via receiving transactions, but it is optional based on the items configuration.

A. When you communicate to the RF that the expiry date of Item X is Sep. 30th, 2017, the system will allow you to receive it. E. Expiry date is the only date value that you can enter via receiving transactions, but it is optional based on the items configuration.

Your customer wants to have the Purchase order created in their legacy ERP system and download it to Oracle WMS Cloud.Identify four mandatory field values that must be present in the Purchase order to be successfully downloaded to the WMS Cloud system. (Choose four.) A. item B. IB Shipment C. Item Quantity D. Purchase Order Number E. Vendor code F. Ship Date G. License Plate Number

A. item C. Item Quantity D. Purchase Order Number E. Vendor code

Why is it necessary to have a consolidation location? Choose one: It is necessary if you want to consolidate while packing. Consolidation locations are used to consolidate orders for a wave. Packing using a Distribution transaction requires a consolidation location for each store. After you are finished picking your pick cart, you use a consolidation location to pack.

After you are finished picking your pick cart, you use a consolidation location to pack.

A client can integrate with WMS Cloud by using the input interface. Which three options can be integrated? (Choose three.) Appointments Loads Item Orders

Appointments Loads Orders

You are performing the Split IB LPNs RF transaction and seeing an error message: Shipment Verification status mismatch. Which three are valid? (Choose three.) A. If the to-IBLPN is received via the Recv Shipment RF transaction, the from-IBLPN might be from the Create RF transaction. B. The from-IBLPN and the to-IBLPN might be received against the same ASN. C. The from-IBLPN and the to-IBLPN might be received against two different ASNs respectively. D. This error message will disappear if the RF screen parameter split-uom is left bank. E. This error message will disappear if the RF screen parameter required-validations is set up as No Validation.

B. The from-IBLPN and the to-IBLPN might be received against the same ASN. D. This error message will disappear if the RF screen parameter split-uom is left bank. E. This error message will disappear if the RF screen parameter required-validations is set up as No Validation.

Which three configurations are required to sort the SKU A and B while receiving? (Choose three.) A. Receive Station Location for Sorting should be created and mapped with the Sorting Rule. B. Use Custom Field in Vendor UI to map the item that needs to be sorted. C. Putaway Type should be configured for the SKU. D. The Locations Size type should be defined for each Receive Station Location. E. Break Rule with Criteria needs to be set for the Sorting Rule. F. An IB Shipment Type should be created to receive Purchase Order with sort SKUs.

B. Use Custom Field in Vendor UI to map the item that needs to be sorted. C. Putaway Type should be configured for the SKU. F. An IB Shipment Type should be created to receive Purchase Order with sort SKUs.

Your company wants to use Replenishment Wave to maintain adequate inventory levels to meet customer demand by fulfilling customer's orders on time.Which Replenishment Trigger Mode needs to be set up in the Replenishment Template for the following condition?* For active Location P20A100* Minimum Volume = 20* Max Volume = 100* Percentage of Max = 20%* Length = 20, Width = 40, Height = 60* If location P20A100 total volume goes below 20, the location is triggered for replenishment A. Order Based B. Reactive C. Percentage of Max D. Minimum Capacity

C. Percentage of Max

Which Inventory screen should you use to configure the Inventory Adjustment Code in Oracle WMS Cloud? A. Items B. IB LPNs C. Reason Codes D. Inventory Lock Codes

C. Reason Codes

A Purchase order created in ERP is downloaded to WMS Cloud. Which two statements are correct related to the Purchase order update? (Choose two.) A. UPDATE is sent in the Header and CREATE in the Detail for an existing Purchase Order line. The application will add up the corresponding "Order Quantity". B. Purchase order can be re-created by sending the RE-CREATE action code when the status is In- Receiving. C. The Purchase order header can be updated by sending an UPDATE action code when the status is in Created and Received. D. UPDATE is sent both in the Header and Detail for an existing line. The application will just update the record at Details. E. The RE-CREATE action code if sent for an existing PO, the same PO will be deleted and re-created with the new details.

C. The Purchase order header can be updated by sending an UPDATE action code when the status is in Created and Received. D. UPDATE is sent both in the Header and Detail for an existing line. The application will just update the record at Details.

You have a high demand item in the warehouse that you order from different vendors (e.g. copy paper). Each one of your vendors has its own item number and barcode for the item, and you have your own internal number for the item. You want to process fulfill orders using your internal number.What should you do in order to accomplish this? A. Create a different item in the WMS Cloud master data for each vendor. B. Create a pre-pack item with the original item barcode as the parent and the vendor barcodes as child items. C. Capture the vendor's barcode upon receiving in an inventory attribute, and then scan the inventory attribute during each transaction that requires an item scan. D. Create Alternate Item Codes in the Item Barcode UI to include all of the vendor's item barcodes. E. Manage your workflow to only receive items form one vendor.

D. Create Alternate Item Codes in the Item Barcode UI to include all of the vendor's item barcodes.

The following configuration is set for the Advance Shipment Notification type: 10% Under Receipt Warning,10% Over Receipt Warning, and 20% Over Receipt error. Which two statements match the condition set if the ASN Qty is 100? (Choose two.) A. When the Operator receives 101, the RF screen displays an Over receipt warning message. B. When the Operator receives 125 units, the RF screen displays an Over Receipt warning message. C. When the Operator receives 89, the RF screen displays an Under Receipt warning message. D. When the Operator receives 130 units, the RF screen displays an Over Receipt error message. E. When the Operator receives 110, the RF screen displays an Over Receipt warning message.

D. When the Operator receives 130 units, the RF screen displays an Over Receipt error message. E. When the Operator receives 110, the RF screen displays an Over Receipt warning message.

Your customer is a Third Party Logistics operator (3PL) and ships multiple customer's orders from two centralized facilities, one on each coast of the country. How do you set up the Facility, Company, and User hierarchy in the system (in sequential order)? A. Because of the distance between Facilities, you recommend two WMS Cloud instances for your customer. B. Create the 3PL's customer's Companies first, then the Users, next assign customers and Users to the Facilities, and finally create an Admin account for the 3PL in each facility. C. Create the Parent 3PL Company, then the Facilities, next the Companies, next re-create each User in each facility he or she is eligible for work. D. Create the Parent 3PL Company, then nested Locations Zones to represent the facilities and the customer Companies and finally add the Users. E. Create the Parent Company as the 3PL, then the two facilities, next the Users in the facilities, and the Companies that represent the customers, and the users to the companies.

E. Create the Parent Company as the 3PL, then the two facilities, next the Users in the facilities, and the Companies that represent the customers, and the users to the companies.

Which two options are true if inventory is unallocated and unavailable? (Choose two.) Inventory located in a drop zone Unlocked inventory located in reserve location Inventory in locations with lock codes Inventory located in active location

Inventory located in a drop zone Inventory in locations with lock codes

Identify the type of functions you need to use to handle conditional information in a report. Choose one: Logical Functions WMS BI Cloud does not support that type of functionality Arithmetic and Geometric Functions Dynamic Functions String Functions

Logical Functions

Which statement is true regarding Replenishment Rules? Choose one: Replenishment Rules are used for defining Wave Template. Replenishment Rules are used for Inventory movement between two warehouses. Replenishment Rules are only editable at the company level in which it was created. Replenishment Rules created at Parent company view can be edited at Child company view.

Replenishment Rules are used for defining Wave Template.

Your customer wants to receive an IB shipment and capture pallet weight at the time of receiving. Which parameter must be set in the Receiving RF screen to meet this requirement? Choose one: SetModeas Blind-ASN Receiving. Setrch-sku-not-on-shmntto "Promt for catch wt". SetBlind-License Plate Number-receive-modeas by SKU scan. SetSingle-Sku-managementas Assume Single SKU. SetCapture-catch-weightas "Prompt for catch wt".

SetModeas Blind-ASN Receiving.

What configuration is needed to create Advance Shipment Notifications for a Transfer Order shipped between two facilities configured in the same WMS Cloud environment? Choose one: Set CREATE_ASN_FOR_EACH_PO to YES at Source and Destination Facility levels. Set CREATE_ASN_FOR_EACH_PO to YES at the Company level. The Facility parameter key AUTOLOAD_and_SHIP should be set to Yes. The "ACCEPT TRANSFER SHIPMENT" flag should be enabled on the Facilities UI screen for the Source Facility. The "ACCEPT TRANSFER SHIPMENT" flag should be enabled on the Facilities UI screen for the Destination Facility.

The "ACCEPT TRANSFER SHIPMENT" flag should be enabled on the Facilities UI screen for the Destination Facility.

You are the Inventory Control Supervisor at your employer's East Coast facility. Your employer is a 3PL, and your customer is a large company that is also serviced out of the other 3PL facilities. As you start the shift, your Inventory Control team members inform you of a significant change in the RF Cycle Counting process. Lost IBLPNs are now updates with a "00" lock code rather than the expected "LL" code. Which scenario is causing this issue? Choose one: One of your inventory team members changed his/her RF parameter default lock code causing the same configuration change to propagate to all users in the facility. While counting LPNs at a location, one of your team members marked a lost case with the new lock code. The new lock code is stored in system memory and applied to all IBLPNs counted as "Lost". An inventory team member in the other facility marked a lost case with "00" lock code causing all subsequent lost cases to be defaulted to the same code across all LPNs for all company/facility combinations. You dismiss the concern because a change in the lock code has no impact on either the WMS Cloud or host inventories. Your counterpart at the 3PL's other facility changed one of th

Your counterpart at the 3PL's other facility changed one of the cycle counting company parameters and that impacted your workflow for that same company.

What is the primary purpose of the Wave Template Search Screen? Choose one: to identify all outbound loads that have not completed picking yet to determine the locked locations for inventory allocation to determine from which part of the warehouse the inventory will be allocated to determine which available orders will be waved for picking to determine how many picking tasks will be waved for picking

to determine how many picking tasks will be waved for picking

In which two ways can you execute the detail cycle count of LPN Detail by sku scan? (Choose two.) using "Cycle count for LPN deffered/immediate updates" with screen parameter sku scan mode set to "By Sku Scan" using "Cycle Cnt" screen with screen parameter content-count set to "Null" using "Cycle Cnt" screen with screen parameter content-count set to "sku-scan" using "Resv Nbr Cnt" screen and with screen parameter content-count set to "sku-scan"

using "Cycle count for LPN deffered/immediate updates" with screen parameter sku scan mode set to "By Sku Scan" using "Cycle Cnt" screen with screen parameter content-count set to "Null"