3D Certification Review
food
a 3D print should never be used to hold this
skirt
a build plate support that surrounds but does not touch the print; a type of plate adhesion
3MF
an XML based file that contains information regarding material, color, etc.
raft
This build plate adhesion creates horizontal lattice under the part and the model is build on top of this instead of directly on a build plate.
post-processing
things that you can do to a 3D print after it is finished printing such as painting it or sanding it
models can be loaded from these places
usb, storage, network computer, wifi
CAN
you _________ make multiple models of something on a single build
slow down the print speed
you should do this if the file is not adhering (sticking) to the plate
REACH
never _____________ into the machine to remove a print
order of preparation on Print Cloud
repair, layout, slice, print
Percentage and Measuring Tool
the 2 was to change the size of a model in slicing software
FDM/FFF
the 3D4o and 3D45 uses this kind of printing technology
280 degrees C
the maximum nozzle temperature for the extruder of the 3D45
extruder tip
the nozzle at the bottom of the extruder (gold)
storage, USB, Wifi, Print Que
the places you can get a job to run in the 3D printer
1932
the year Albert Dremel invented the first moto tool
10X6X6.7
these are the dimensions of the build platform; max build volume
change filament
it is possible to do this half way through a print job
ethernet cable and USB
2 ways you can connect a computer to a 3D printer
additive
3D printing is this type of manufacturing
Personal Protective Equipment (PPE)
It is best practice to wear/use this when using a 3D printer for safety reasons
OBJ
This is the file format for polygonal and free form objects; Polygonal (point, lines, faces, to define objects); free form (curves and surfaces)
spaghetti or bird nest
a result of a model that does not have enough surface area in contact with the build plate or if an object is floating above the build platform
brim
a special skirt that attaches to the edges of the build similar to a hat
layer height
adjusting this higher will give a fast print with low resolution; adjusting it lower will give a slow print with high resolution
Changelog
in Digilab, this shows the latest version of software and what modifcations were made since the last update
level
it is best practice to do this to the 3D printer before every print
supports
materials generated to support overhanging parts
230 degrees C
maximum nozzle temperature for the 3D40
black or blue tape
on an 3D40, you use this on the build plate instead of glue
job fails to build
this could happen if the extruder is clogged or if the printer has run out of filament
standard 110 volt
this is the type of electrical power required by the 3D 40
PLA
this is the type of filament used in the 3D40
analyze and inspect
this tool inspects your model for geometry problems
camera, heated build plate, types of filament used
three major differences between the 3D45 printer and 3D40
