70-740 ExamRef-12 TB, 70-740 ExamRef-11 TB, 70-740 ExamRef-9 TB, 70-740 ExamRef-8 TB, 70-740 ExamRef-7 TB, 70-740 ExamRef-6 TB, 70-740 ExamRef-5 TB, 70-740 ExamRef-4 TB, 70-740 Panek-3 TB, 70-740 ExamRef-20 TB, 70-740 ExamRef-10 TB, 70-740 ExamRef-16...
5. Which Docker network driver involves each container endpoint connecting directly to the container host's physical network. A. Transparent B. L2 Bridge C. L2 Tunnel D. NAT
A. Transparent The Transparent Docker network driver involves each container endpoint connecting directly to the container host's physical network.
3. What type of disk is actually a physical disk on the Hyper-V host that is attached directly to a guest VM? A. Pass-through B. Differencing C. Dynamic D. Fixed
A. Pass-through Windows Server 2016 Hyper-V supports pass-through disks, which are physical disks on the Hyper-V host can be "passed through" directly to a guest virtual machine (VM).
4. What is signified by a return value of 1 when you run the PowerShell command (Get-Cluster).DrainOnShutdown? A. The Drain on Shutdown feature is enabled. B. The Drain on Shutdown feature is disabled. C. The Drain on Shutdown feature is managed through Group Policy. D. The Drain on Shutdown feature is managed through Desired State Configuration.
A. The Drain on Shutdown feature is enabled. A return value of 1 when you run the PowerShell command (Get-Cluster).DrainOnShutdown signifies that the Drain on Shutdown feature is enabled on the Hyper-V cluster node.
10. An application that runs on Windows Server 2016 is a called a: A. reparse point B. volume C. workload D. file system
C. workload An application that runs on Windows Server 2016 is a called a workload
6. What visual representation does Resource Monitor use when information is filtered? A. A red filter label B. A green highlight C. An exclamation point D. An orange bar
D. An orange bar Resource Monitor denotes filtered data by presenting an orange bar below the title bar of each table.
8. Which of the following is not included in a Hyper-V storage migration? A. smart paging files B. checkpoints C. configuration files D. host registry values
D. host registry values A Hyper-V storage migration involves the transport of configuration files, checkpoints, and smart paging files.
5. The DDPEval command-line tool is used to evaluate: A. whether your workload is compatible with deduplication B. if your host server is a good candidate for Windows Defender C. the performance impact of dataset duplication D. how much duplication your workload's dataset contains
D. how much duplication your workload's dataset contains The DDPEval command-line tool is used to evaluate how much duplication your workload's dataset contains.
4. What protocol can be used in Windows Server 2016 to discover network-based iSCSI devices? A. Fibre Channel B. ReFS C. DNS D. iSNS
D. iSNS The iSNS protocol can be used in Windows Server 2016 to discover network-based iSCSI devices?
4. Run the ___________ command on a Windows Server 2016 container host to install the latest Windows Server Core image. A. docker ps B. docker run C. docker compose D. docker pull
*Correct answer:* (D. docker pull?) Run the docker pull command on a Windows Server 2016 container host to install the latest Windows Server Core image. Specifically, the command is docker pull Microsoft/windowsservercore.
2. To create a storage pool, you need at least _______ physical disk(s). A. 1 B. 2 C. 3 D. 5
A. 1 You need at least one physical disk to create a storage pool in Windows Server 2016 Storage Spaces.
1. Which of the following is not a system requirement for Hyper-V in Windows Server 2016? A. 8 GB RAM B. SLAT-compatible processor C. BIOS or UEFI virtualization extensions D. XD or NX bit support
A. 8 GB RAM Windows Server 2016 Hyper-V requires a minimum of 4 GB RAM.
1. Which of the following is not a valid layout option for Windows Server 2016 Storage Spaces? A. Advanced B. Parity C. Two-way Mirror D. Simple
A. Advanced The three valid layout options for Windows Server 2016 Storage Spaces are Simple, Two-way/Three-way mirror, and Parity.
3. What is the name of a Windows Server failover cluster's Active Directory object? A. CNO B. LDAP C. gMSA D. CRL
A. CNO The failover is represented in Active Directory by a cluster name object (CNO).
4. Which Windows Server 2016 edition is required to enable Storage Spaces Direct? A. Datacenter B. Standard C. Enterprise D. Essentials
A. Datacenter Windows Server 2016 Datacenter Edition is required to enable Storage Spaces Direct.
10. What is the name of Docker's public image repository? A. Docker Hub B. GitHub C. Registry D. PSGallery
A. Docker Hub Docker Hub (https://hub.docker.com) is the name of Docker's public image repository.
7. Which PowerShell command do you run to enable Storage Spaces Direct in Windows Server 2016? A. Enable-ClusterStorageSpacesDirect B. Enable-StorageSpacesDirect C. Install-StorageSpacesDirect D. Install-S2D
A. Enable-ClusterStorageSpacesDirect Run the Enable-ClusterStorageSpacesDirect PowerShell command to enable Storage Spaces Direct in Windows Server 2016.
5. Which Hyper-V feature allows a computer running VMConnect to mount its local storage devices inside a guest VM? A. Enhanced Session Mode B. Live Migration C. Replication Configuration D. NUMA Spanning
A. Enhanced Session Mode Enhanced Session mode is a Hyper-V feature allows a computer running VMConnect to mount its local storage devices inside a guest VM.
9. Which of the following is a partition layout scheme that can allocate disk space beyond 2 TB? A. GPT B. SMB C. NFS D. MBR
A. GPT GPT is a disk partition layout scheme that supports partitions greater than 2 terabytes (TB).
4. What is a desirable value for the Physical Disk - % Idle Time Performance Monitor value for general server health? A. Greater than 20% B. Greater than 15% C. Less than 25 ms D. Less than 2
A. Greater than 20% Greater than 20% is a desirable value for the Physical Disk - % Idle Time Performance Monitor value for general server health.
6. You configure WSUS client behavior through: A. Group Policy B. System Policy C. Desired State Configuration D. Failover Clustering
A. Group Policy You use Group Policy to configure Windows Server Update Services (WSUS) client behavior.
5. What is the scenario called when the Hyper-V cluster and its storage reside on the same appliance? A. Hyper-converged B. Disaggregated C. Scale-in cluster D. Combined
A. Hyper-converged "Hyper-converged" is the name of the scenario in which Hyper-V cluster and its storage reside on the same server hardware.
6. Which Windows Server 2016 Hyper-V virtual switch type permits communication between guest VMs and between the VMs and the Hyper-V host? A. Internal B. Private C. Firewall D. Shielded
A. Internal Internal is the Windows Server 2016 Hyper-V virtual switch type that permits communication between guest VMs and between the VMs and the Hyper-V host.
10. *INSERT TABLE* John is a member of the HR and Marketing departments. There is a shared folder that everyone uses called the Apps folder. The following table shows the current permissions on the Apps shared folder: When John logs onto the Apps folder, what will his local and remote permissions be? A. Local would be Full Control, and Remote would be Deny. B. Local would be Deny, and Remote would be Deny. C. Local would be Full Control, and Remote would be Change. D. Local would be Change, and Remote would be Read.
A. Local would be Full Control, and Remote would be Deny. Permissions are additive among themselves. This means you get the highest level of permissions. But when the two permissions meet, the most restrictive set of permissions applies. In this question, the NTFS side would be Full Control (this would be the local permission) and the Shared permission would be Deny. But when the two permissions meet, the most restrictive, Deny, would apply.
1. What type of file share do you normally see with Linux-based systems? A. NFS B. SMB C. ReFS D. NTFS
A. NFS Linux-based servers typically share file system resources by using the Network File System (NFS) file-sharing protocol.
4. Which NLB affinity setting specifies that all traffic originating from the same Class C address block is sent to the same host? A. Network B. All C. Single D. None
A. Network The Network Network Load Balancing (NLB) affinity setting specifies that all traffic originating from the same Class C address block is sent to the same host.
7. After you install the NLB feature on a Windows Server 2016 host, what management tool is available from Server Manager? A. Network Load Balancing Manager B. Application Balancing Manager C. Storage Manager D. Cluster Manager
A. Network Load Balancing Manager After you install the NLB feature on a Windows Server 2016 host, the Network Load Balancing Manager management tool is available from Server Manager.
1. The fundamental difference between Quick Migration and Live Migration is that ______ copies the VM's memory first to disk, and then from disk to the destination. A. Quick Migration B. Live Migration C. Shared-Nothing Migration D. Classic Migration
A. Quick Migration The fundamental difference between Quick Migration and Live Migration is that Quick Migration copies the VM's memory first to disk, and then from disk to the destination.
9. A prerequisite for S2D is that no existing storage have __________ enabled. A. RAID B. NFS C. SMB D. SSD
A. RAID A prerequisite for S2D is that no existing storage have RAID configuration enabled.
2.You have a server and you want to provision a new volume that will be used to create large, fixed-size VHDX files. What type of file system should you use on the new volume to minimize the amount of time required to create the files? A. ReFS B. NTFS C. CVFS D. exFAT
A. ReFS ReFS has the fastest creation times for large, fixed-size VHDX files.
6. Which of the following is NOT an advanced NTFS shared folder permission in Windows Server 2016? A. Read/Write B. Full Control C. Read D. Change
A. Read/Write Read/write is not an advanced NTFS shared folder permission in Windows Server 2016?
9. Tiered storage in Windows Server 2016 refers to prioritizing __________ disks over ____________ disks. A. SSD, HDD B. HDD, SSD C. iSCSI, SAS D. SAS, iSCSI
A. SSD, HDD Tiered storage in Windows Server 2016 refers to prioritizing SSD disks over HDD disks.
4. Which PowerShell command is necessary as a prerequisite to enabling nested virtualization on a Windows Server 2016 Hyper-V host? A. Set-VMProcessor B. Set-VMFirmware C. Set-VMBios D. Set-VM
A. Set-VMProcessor You must run the Set-VMProcessor command as a prerequisite to enabling nested virtualization on a Windows Server 2016 Hyper-V host.
4. Which PowerShell command is used to initiate a data deduplication job? A. Start-DedupJob B. Enable-DedupJob C. Start-DedupJobVolume D. Enable-DedupStatus
A. Start-DedupJob The Start-DedupJob PowerShell command is used to initiate a data deduplication job on a target volume.
9. Which of the following is not a valid backup destination in Windows Server 2016? A. Tape drive B. Internal HD C. Network share D. Writable DVD drive
A. Tape drive You can back up data to an internal hard drive, external hard drive, a network share, or a writeable DVD drive. Windows Server no longer supports tape drives.
7. What does a return value of 2 mean in terms of node fairness when you run the PowerShell statement (Get-Cluster)AutoBalancerLevel on a failover clustering host? A. The cluster will migrate VMs when the host is more than 70 percent loaded. B. The cluster will migrate VMs when the host is more than 80 percent loaded. C. The cluster will migrate VMs when the host is more than 60 percent loaded. D. The cluster will migrate the VMs at the administrator's discretion.
A. The cluster will migrate VMs when the host is more than 70 percent loaded. If you run the PowerShell statement (Get-Cluster)AutoBalancerLevel on a failover clustering host and receive a return value of 2, that means that the cluster will migrate VMs when the host is more than 70 percent loaded.
7. Which of the following statements is false concerning shared-nothing Hyper-V live migration in Windows Server 2016. A. The source and destination host servers must use different CPU families. B. The source and destination host servers must have identical virtual switches. C. The network connection between the host servers must run at least 1 Gbps. D. Both host servers must be members of the same Active Directory domain.
A. The source and destination host servers must use different CPU families. One of the prerequisites of shared-nothing Hyper-V live migration in Windows Server 2016 is that the source and destination host servers must indeed use the same CPU family, either Intel or AMD.
5. Which NLB cluster operation mode prevents cluster hosts from communicating with each other using their designated cluster network adapters. A. Unicast B. Multicast C. IGMP multicast D. Anycast
A. Unicast The Unicast Network Load Balancing (NLB) cluster operation mode prevents cluster hosts from communicating with each other using their designated cluster network adapters.
8. Which of the following is NOT an advanced network adapter feature setting in Windows Server 2016 Hyper-V? A. VLAN identification B. MAC address spoofing C. Protected network D. DHCP guard
A. VLAN identification VLAN identification is not an advanced network adapter feature setting in Windows Server 2016 Hyper-V.
4. In Hyper-V cluster VM monitoring, the cluster takes over service management if the _____________ cannot first resolve the service issue. A. VM service control manager B. cluster service control manager C. VM performance monitor D. cluster performance monitor
A. VM service control manager In Hyper-V cluster VM monitoring, the cluster takes over service management if the VM's service control manager cannot first resolve the service issue.
6. What Hyper-V feature is enabled by the PowerShell command Set-VM -AutomaticCriticalErrorAction Pause? A. VM storage resiliency B. Pass-through disks C. VM metering D. Shielded VMs
A. VM storage resiliency In Windows Server 2016 Hyper-V, virtual machine (VM) storage resiliency is enabled by the PowerShell command Set-VM -AutomaticCriticalErrorAction Pause.
3. WSUS uses __________ as its data store by default. A. Windows Internal Database B. SQL Server C. MySQL D. Oracle
A. Windows Internal Database Windows Server Update Services (WSUS) uses Windows Internal Database (WID) as its default data store. However, you can use a separate SQL Server instance instead.
2. Hyper-V VM replication can use either Kerberos or __________ for mutual authentication. A. certificates B. biometrics C. AD FS D. NTLM
A. certificates Hyper-V VM replication can use either Kerberos or certificates for mutual authentication.
4. In Windows Server 2016 Hyper-V Live Migration, the use of CredSSP eliminates the need for: A. constrained delegation B. Kerberos C. failover clustering D. PowerShell
A. constrained delegation In Windows Server 2016 Hyper-V Live Migration, the use of CredSSP eliminates the need for having to set up Kerberos constrained delegation.
2. What action is performed by the -v parameter in the Docker command docker run -it -v? A. creates a data volume B. spawns an interactive session C. opens the container with administrative credentials D. creates a new PowerShell session
A. creates a data volume The -v parameter in the Docker command docker run -it -v is used to create a data volume inside the container.
6. What file includes startup parameter information for the Docker engine? A. daemon.json B. init.ini C. config.cfg D. start.xml
A. daemon.json The daemon.json file includes startup parameter information for the Docker engine.
9. What is the term used to describe replicating a VM to a third host in Hyper-V replica? A. extended replication B. advanced replication C. forest trust replication D. three-way replication
A. extended replication Extended (chained) replication describes replicating a VM to a third host in Hyper-V replica.
2. Windows 10 Enterprise Edition can host: A. only Hyper-V containers B. only Windows Server containers C. either Hyper-V or Windows Server containers D. either non-Docker containers or Windows Server containers
A. only Hyper-V containers Windows 10 Enterprise Edition can host only Server Core or Nano Server Hyper-V containers.
10. Windows Server 2016 _________ hard disks use 512 bytes per physical disk sector. A. standard B. advanced C. SMB D. NFS
A. standard Windows Server 2016 standard format hard disks use 512 bytes per physical disk sector.
8. Windows Server 2016 Hyper-V VMs can use BitLocker Drive Encryption with _________ hardware encryption support. A. vTPM B. GPO C. shielded VM D. Hot add network adapter
A. vTPM Windows Server 2016 Hyper-V VMs can use BitLocker Drive Encryption with virtual Trusted Platform Model (TPM) support.
7. Deduplication in Windows Server 2016 is configured on a per-___________ basis. A. volume B. physical disk C. disk array D. sector
A. volume Deduplication in Windows Server 2016 is configured on a per-volume basis.
6. Windows Server 2016 failover clustering creates a _________ when the cluster has an even number of nodes. A. witness B. quorum C. file share D. cluster name object
A. witness Windows Server 2016 failover clustering creates a witness when the cluster has an even number of nodes.
4. A Master Boot Record (MBR) has a partition table that indicates where the partitions are located on the disk drive, and with this particular partition style, only volumes up to how big are supported? A. 1 TB (1,024 GB) B. 2 TB (2,048 GB) C. 3 TB (3,072 GB) D. 4 TB (4,096 GB)
B. 2 TB (2,048 GB) A MBR has a partition table that indicates where the partitions are located on the disk drive, and with this particular partition style, only volumes up to 2 TB (2,048 GB) are supported. An MBR drive can have up to four primary partitions, or it can have three primary partitions and one extended partition that can be divided into unlimited logical drives.
10. Windows Server 2016 clustered storage pools require a minimum of _______ disks. A. 2 B. 3 C. 5 D. 10
B. 3 Windows Server 2016 clustered storage pools require a minimum of three disks.
8. Which docker run CPU parameter specifies which nodes on a NUMA host the container can use? A. -c B. -cpuset-mems C. -cpuset-cpus D. -cpu-shares
B. -cpuset-mems The docker -cpuset-mems docker run CPU parameter specifies which nodes on a NUMA host the container can use.
10. You need to disable Drain on Shutdown on a cluster node. Complete the PowerShell: (Get-Cluster).DrainOnShutdown= A. -1 B. 0 C. 1 D. $false
B. 0 To disable Drain on Shutdown on a cluster node, run the PowerShell statement (Get-Cluster).DrainOnShutdown= 0. A value of 1 enables the feature.
7. A Windows Server 2016 Hyper-V host must have at least _____ physical network adapters to perform load balancing or failover. A. 1 B. 2 C. 3 D. 5
B. 2 A Windows Server 2016 Hyper-V host must have at least two physical network adapters to perform load balancing or failover.
9. The container host VM needs at least _________ virtual processor(s). A. 1 B. 2 C. 4 D. 8
B. 2 The container host virtual machine (VM) needs at least two virtual processor(s).
9. What is the minimum number of hosts allowed in a Windows Server 2016 NLB cluster? A. 1 B. 2 C. 3 D. 4
B. 2 You can have between 2 and 32 hosts as members of a single Network Load Balancing (NLB) cluster in Windows Server 2016.
6. What is the recommended drive distribution for Storage Spaces Direct in Windows Server 2016? A. 3 SSD/3 HDD B. 2 SSD/4 HDD C. 4 SSD/2 HDD D. 5 SSD/1 HDD
B. 2 SSD/4 HDD The recommended drive distribution for Storage Spaces Direct in Windows Server 2016 is 2 solid-state disks (SSDs) for every four mechanical hard disk drives (HDDs).
3. Which of the following network technologies is not compatible with SET in Windows Server 2016? Hyper-V? A. Data Center Bridging (DCB) B. 802.1X authentication C. Remote Direct Memory Access (RDMA) D. Virtual Machine Queue (VMQ)
B. 802.1X authentication IEEE 802.1X authentication is not compatible with Switch Embedded Teaming (SET) in Windows Server 2016 Hyper-V.
5. Which management console is used to configure Kerberos constrained delegation? A. Active Directory Domains and Trusts B. Active Directory Users and Computers C. Active Directory Sites and Services D. Certification Authority
B. Active Directory Users and Computers Use the Active Directory Users and Computers management console to configure Kerberos constrained delegation.
5. Running a PowerShell script is an example of a Performance Monitor: A. Alert action B. Alert task C. Alert metadata D. Alert job
B. Alert task Running a PowerShell script is an example of a Performance Monitor alert task.
1. Which of the following is NOT an advantage of Generation 2 VMs? A. VHDX boot volume resizing B. Azure support C. PXE boot D. Software-based peripherals
B. Azure support Microsoft Azure supports only Generation 1 Hyper-V virtual machines (VMs).
3. True or False: Active Directory can reside on an NTFS or ReFS partition. A.True B. False
B. False Although the features of the other file systems will compel most system administrators to use NTFS, additional reasons make using it mandatory. The most important reason is that the Active Directory data store must reside on an NTFS partition.
8. Which product feature enables a Windows Server 2016 failover cluster to update all nodes in a round-robin fashion? A. CNO B. CAU C. CAO D. CIU
B. CAU Cluster-aware Updating (CAU) is a product feature enables a Windows Server 2016 failover cluster to update all nodes in a round-robin fashion.
7. What does the following command do? CONVERT c: /fs:ntfs A. Formats the C drive. B. Converts the C drive from NTFS to FAT. C. Converts the C drive from FAT to NTFS. D. Scans the C drive for errors.
B. Converts the C drive from NTFS to FAT. If you want to convert an existing partition from FAT or FAT32 to NTFS, you need to use the CONVERT command-line utility inserting the drive letter where C is in the command.
8. Which MMC console can be used to attach a VHD to the local Windows Server 2016 computer? A. Device Manager B. Disk Management C. Services D. WMI Control
B. Disk Management You can use the Disk Management MMC console to attach virtual hard disk (VHD) files to the local Windows Server 2016 computer.
1. Which of the following is not a legitimate virtual hard disk type in Windows Server 2016 Hyper-V? A. Differencing B. Editable C. Dynamically expanding D. Pass-through
B. Editable The four valid virtual hard disk types in Windows Server 2016 Hyper-V are: fixed, dynamically expanding, pass-through, and differencing.
6. To install the data deduplication feature, run the PowerShell statement Install-WindowsFeature -Install: A. Data-Deduplication B. FS-Data-Deduplication C. Data-Center-Bridging D. FS-FileServer
B. FS-Data-Deduplication To install the data deduplication feature, run the PowerShell statement Install-WindowsFeature -Name FS-Data-Deduplication.
6. Which of the following statements is true concerning the server-to-server replication option in Windows Server 2016 Storage Replica? A. The servers can exist in a workgroup or domain. B. Firewalls must allow SMB bidirectional traffic. C. You need at least 2 GB RAM in each server. D. Both server nodes must have local power user permissions.
B. Firewalls must allow SMB bidirectional traffic. With regard to the server-to-server replication option in Windows Server 2016 Storage Replica, firewalls must allow SMB, ICMP, and WS-Man birectional traffic between storage nodes.
5. Which PowerShell cmdlet retrieves the ACL of an SMB share? A. Get-SmbShare B. Get-SmbShareAccess C. Get-SmbSession D. Get-SmbServerConfiguration
B. Get-SmbShareAccess The Get-SmbShareAccess PowerShell cmdlet retrieves the access control list (ACL) of a server message block (SMB) share.
9. Which of the following statements is NOT true concerning Windows Server 2016 Hyper-V? A. Hyper-V now supports Linux VMs. B. Hyper-V and VMware can co-exist on the same host server. C. Hyper-V requires a 64-bit processor. D. Hyper-V VMs can use vTPM modules.
B. Hyper-V and VMware can co-exist on the same host server. Hyper-V and VMware cannot co-exist on the same host server because Hyper-V requires exclusive access to the host server's hypervisor.
10. Which of the following is a PowerShell command that can be used to create a new differencing disk? A. New-DiffDisk B. New-VHD C. New-Diff D. New-VHDDiff
B. New-VHD New-VHD is a PowerShell command that can be used to create a new differencing disk.
3. Which data deduplication feature identifies corruption in the chunk store due to disk failures or bad sectors? A. Optimization B. Integrity scrubbing C. Garbage collection D. Unoptimization
B. Integrity scrubbing The Integrity scrubbing data deduplication feature identifies corruption in the chunk store due to disk failures or bad sectors.
6. What is the action performed by the PowerShell statement Move-ClusterVirtualMachineRole -Name 'vm2' -node 'node5'? A. Quick Migration B. Live Migration C. Node drain D. Failback
B. Live Migration The PowerShell statement Move-ClusterVirtualMachineRole -Name 'vm2' -node 'node5' denotes a Live Migration of the Hyper-V virtual machine (VM) named vm2 to the cluster node named node5.
8. What STATE value should you expect when running the command sc query Windefend if Windows Defender is running properly on that server? A. SUCCESS B. RUNNING C. 0 D. 1
B. RUNNING You should expect a STATE value of RUNNING when running the command sc query Windefend if Windows Defender is running properly on that server.
6. Which of the following is a legitimate upgrade type in Windows Server 2016 NLB? A. Shared nothing upgrade B. Rolling upgrade C. Concurrent upgrade D. Targeted upgrade
B. Rolling upgrade The two NLB upgrade types supported in Windows Server 2016 are Simultaneous upgrade and Rolling upgrade.
2. Storage Spaces Direct in Windows Server 2016 is also known as: A. SSD B. S2D C. 2SD D. DS2
B. S2D Storage Spaces Direct in Windows Server 2016 is also known as S2D.
2. What is the name of the SMB 3.0 feature that performs memory-to-memory data transfers between remote systems? A. SMB Multichannel B. SMB Direct C. SMB Scale-out D. SMB Directory Leasing
B. SMB Direct Server Message Block (SMB) Direct is an SMB 3.0 feature that performs high-speed memory-to-memory data transfers between remote systems.
8. What SMB 3.0 feature supports continuously available file shares? A. SMB Direct B. SMB Scale-out C. SMB Transparent Failover D. SMB Multichannel
B. SMB Scale-out Server Message Block (SMB) Scale-out is an SMB 3.0 feature that supports continuously available file shares.
8. What is the name of the technology that permits Hyper-V host PCI Express network adapters to bypass the virtual switch and connect directly to a guest VM? A. Secure Boot B. SR-IOV C. Enhanced Session Mode D. Live Migration
B. SR-IOV Single-Root I/O Virtualization (SR-IOV) is a technology that permits Hyper-V host PCI network adapters to bypass the virtual switch and connect directly to a guest VM.
3. Which of the following is NOT a legitimate data source for a Data Collector Set? A. Performance counter B. System Center logs C. Event trace data D. System configuration information
B. System Center logs Data Collector sets have three data sources: Performance counter, Event trace data, and System configuration information.
4. To add a virtual NIC in Windows Server 2016 Hyper-V Manager, what shortcut menu option should you choose after selecting your virtual machine? A. Add Hardware B. Settings C. Properties D. Hardware
B. Settings To add a virtual network interface card (NIC) in Windows Server 2016 Hyper-V Manager, you should choose the Settings shortcut menu option after selecting your virtual machine.
9. Which of the following are true about Shared folder permissions? (Choose all that apply.) A. Shared folder permissions apply to files. B. Shared folder permissions apply to folders. C. Shared folder permissions apply locally to the data. D. Shared folder permissions apply remotely to the data.
B. Shared folder permissions apply to folders. D. Shared folder permissions apply remotely to the data. Shared folder permissions apply only across the network (remotely) and can only be put on folders. NTFS can apply local and remote and NTFS can be placed on files or folders.
2. Which of the following is a Windows Server 2016 Hyper-V feature intended to protect VMs from virtualization host administrators? A. BitLocker B. Shielded VMs C. Nested virtualization D. PowerShell Direct
B. Shielded VMs Shielded VM is a new Windows Server 2016 Hyper-V feature intended to protect VMs from virtualization host administrators. This protection takes place by encrypting the VM's virtual hard disk and providing access control security over its contents.
1. Which of the following is not a valid Windows Server 2016 failover cluster role? A. DHCP server B. container host C. File server D. Generic service
B. container host Container host is not a valid Windows Server 2016 failover cluster role. Legitimate cluster roles include DFS Namespace Server, DHCP Server, File Server, Generic Service, and Virtual Machine.
7. Which of the following is false concerning Virtual Fibre Channel in Windows Server 2016 Hyper-V? A. The Hyper-V host must have a physical HBA. B. The guest VM must not use virtual machine extensions. C. You can deploy up to four virtual Fibre Channel adapters on each VM. D. Virtual Fibre Channel supports port virtualization.
B. The guest VM must not use virtual machine extensions. To deploy Virtual Fibre Channel in Windows Server 2016 Hyper-V, the guest VMs must support virtual machine extensions.
9. Resource Monitor was introduced in: A. Windows Server 2003 R2 B. Windows Server 2008 R2 C. Windows Server 2012 R2 D. Windows Server 2016
B. Windows Server 2008 R2 Resource Monitor was introduced in Windows Server 2008 R2 for the server product line. For the desktop operating system product line, Resource Monitor first appeared in Windows Vista.
4. Which of the following statements is false concerning differencing disks? A. When you modify a parent disk, all linked differencing disks fail. B. You can link only a single differencing disk to a single parent disk. C. You can use the Inspect Disk tool to locate a differencing disk's parent disk. D. You can reconnect a differencing disk by using Hyper-V Manager.
B. You can link only a single differencing disk to a single parent disk. You can actually link multiple differencing disks to a single parent disk in Windows Server 2016 Hyper-V.
4. Which of the following statements is true concerning ReFS? A. ReFS does not support automatic integrity checking. B. You cannot use it with Cluster Shared Volumes. C. There is conversion capability between NTFS and ReFS. D. Disk quotas are supported.
B. You cannot use it with Cluster Shared Volumes. You cannot use Resilient File System (ReFS) disks with Windows Server 2016 failover clustering and cluster shared volumes (CSVs).
1. The __________ is a physical or virtual computer system running Windows Server 2016 that is configured with the Windows Containers feature. A. container image B. container host C. container repository D. sandbox
B. container host The container host is a physical or virtual computer system running Windows Server 2016 that is configured with the Windows Containers feature.
7. You can manage Windows Server container by using PowerShell or _________ commands. A. bash B. docker C. cmd D. JavaScript
B. docker You can manage Windows Server container by using PowerShell or docker commands.
1. Which Docker command enables you to see a list of all the running containers on a host? A. docker attach B. docker ps -a C. docker run -it D. docker rm
B. docker ps -a The docker ps -a Docker command enables you to see a list of all the running containers on a host.
5. With a ___________, the failover cluster moves the back to the original node. A. flashback B. failback C. failover D. cutover
B. failback With a failback, the failover cluster moves the back to the original node.
3. Network Health Protection is a Windows Server 2016 feature that detects whether a VM: A. has MAC spoofing enabled on its virtual network adapter B. has a functional connection to a designated network C. has a virtual network adapter that is part of a NIC team D. has IPv6 enabled
B. has a functional connection to a designated network Network Health Protection is a Windows Server 2016 feature that detects whether a VM has a functional connection to a designated network.
7. The iSCSI ___________ is the client side of an iSCSI SAN connection. A. target B. initiator C. peer D. IQN
B. initiator The iSCSI initiator is the client side of an iSCSI SAN connection. The iSCSI target is the server side.
9. In network virtualization, the ______ IP address is visible to other hosts on the physical network, but not on the VM itself. A. administration B. provider C. tenant D. customer
B. provider In network virtualization, the provider IP address is visible to other hosts on the physical network, but not on the VM itself.
3. What is the purpose of the -it parameter in a docker run command? A. spawns a new container B. starts an interactive console session C. creates a data volume in the container D. secures the container
B. starts an interactive console session The -it parameter in a docker run command starts a virtual console session. The docker run command spawns a new container.
8. Receiving a LastOptimizationResult value of 0 from Get-DedupStatus indicates: A. failure B. success C. warning D. error
B. success Receiving a LastOptimizationResult value of 0 from Get-DedupStatus indicates a success condition.
6. What application can you run to test your Windows Server 2016 for Hyper-V readiness? A. procexp.exe B. systeminfo.exe C. regedit.exe D. ntoskrnl.exe
B. systeminfo.exe You can run the systeminfo.exe command-line tool to test your Windows Server 2016 for Hyper-V readiness.
2. What action is performed by the Test-Cluster PowerShell command? A. tests failover B. validates cluster hardware and settings C. tests failback D. validates the existence of each clustered VM
B. validates cluster hardware and settings The Test-Cluster PowerShell cmdlet should be run prior to deploying a cluster; the command validates the cluster hardware and proposed cluster configuration.
3. What command-line tool can you use to check disk sector size metadata? A. coreinfo B. mbr C. diskpart D. fsutil
D. fsutil You can use the fsutil command-line tool to check disk sector size metadata on Windows Server 2016 hard disks.
4. Quorum in failover clustering prevents the _____________ problem. A. constained delegation B. extended replication C. split-brain D. cluster validation
C. split-brain Quorum in failover clustering prevents the split-brain problem, in which an even number of cluster nodes are not able to establish a majority vote on cluster viability.
1. What counter does Performance Monitor display by default in Windows Server 2016? A. Disk Faults/Sec B. Total Pages/Sec C. % Processor Time D. Total Avail Memory
C. % Processor Time Performance Monitor displays the % Processor Time counter by default in Windows Server 2016.
3. Which of the following is a distinguishing parameter used with PowerShell Direct-enabled cmdlets? A. -ComputerName B. -AsJob C. -VMName D. -ConfigurationName
C. -VMName The -VMName parameter is used with Windows Server 2016 Hyper-V cmdlets that support PowerShell Direct. PowerShell Direct allows the Hyper-V host to connect to guest VMs directly through PowerShell.
1. Windows Server 2016 failover clustering supports up to ___________ virtual machines per node. A. 256 B. 512 C. 1024 D. 2056
C. 1024 Windows Server 2016 failover clustering supports up to 1,024 virtual machines (VMs) per node.
1. A Windows Server 2016 Storage Spaces Direct cluster can consist of up to __________ nodes. A. 4 B. 8 C. 16 D. 32
C. 16 A Windows Server 2016 Storage Spaces Direct cluster can consist of up to 16 nodes with up to 400 drives.
1. What is the minimum hard disk space requirement for WSUS? A. 500 MB B. 1 GB C. 20 GB D. 100 GB
C. 20 GB The minimum hard disk space requirement for Windows Server Update Services (WSUS) is 20 GB, although Microsoft recommends a 40 GB minimum.
1. A Windows Server 2016 NLB cluster can contain up to _____ hosts. A. 8 B. 16 C. 32 D. 48
C. 32 A Windows Server 2016 Network Load Balancing (NLB) cluster can contain up to 32 hosts.
10. A single Storage Spaces Direct cluster can host up to ___________ drives. A. 50 B. 250 C. 400 D. 500
C. 400 A single Storage Spaces Direct cluster can host up to 400 drives.
2. How many bytes/sector does the Windows Server 2016 advanced format use? A. 512 bytes B. 512 KB C. 4096 bytes D. 4096 KB
C. 4096 bytes The Windows Server 2016 advanced format allocates space 4096 byte per physical sector. This larger sector size accommodates larger hard disk drives and partitions.
3. For three-way mirroring resiliency in Windows Server 2016 Storage Spaces, you need at least _______ physical disk(s). A. 1 B. 3 C. 5 D. 10
C. 5 For three-way mirroring resiliency in Windows Server 2016 Storage Spaces, you need at least five physical disk(s).
4. What is the maximum number of checkpoints a Windows Server 2016 Hyper-V host can store for a VM? A. 5 B. 25 C. 50 D. 75
C. 50 A Windows Server 2016 Hyper-V host can store up to 50 checkpoints for each guest virtual machine (VM).
2. The VHDX format supports volumes up to: A. 24 TB B. 48 TB C. 64 TB D. 128 TB
C. 64 TB The VHDX virtual hard disk format supports volumes up to 64 terabytes (TB).
8. In a disaggregated Storage Spaces Direct cluster, you separate _____________ from your VM workloads. A. failover clustering B. security C. storage D. compute
C. storage In a disaggregated Storage Spaces Direct cluster, you separate storage from your VM workloads. In one cluster you have a Storage Spaces Direct Scale-Out File Server cluster workload, and in the second cluster you have your VM workloads.
9. Which PowerShell cmdlet allows the configuration of VM monitoring? A. Create-MonitoredClusterVM B. Set-ClusterVMItem C. Add-ClusterVMMonitoredItem D. Get-VMMonitoredItem
C. Add-ClusterVMMonitoredItem The Add-ClusterVMMonitoredItem PowerShell cmdlet allows the configuration of VM monitoring.
5. What PowerShell command sets a Hyper-V VM for high availability? A. Add-VMHA B. Add-ClusterVMHA C. Add-ClusterVirtualMachineRole D. Add-ClusterVM
C. Add-ClusterVirtualMachineRole The Add-ClusterVirtualMachineRole PowerShell command sets a Hyper-V VM for high availability.
8. Which PowerShell command is used to connect an iSCSI initiator to an iSCSI target? A. New-IscsiTargetPortal B. Add-IscsiTargetNode C. Connect-IscsiTarget D. Invoke-IscsiTarget
C. Connect-IscsiTarget The Connect-IscsiTarget PowerShell command is used to connect an iSCSI initiator to an iSCSI target.
9. Which of the following is NOT a new VM state in Windows Server 2016 failover clustering? A. Unmonitored B. Quarantine C. Constrained D. Isolated
C. Constrained The three valid VM states in Windows Server 2016 failover clustering are Unmonitored, Isolated, and Quarantine.
6. You purchase a new desktop computer that has four external USB hard drives. You want to create a single volume by using the four USB drives. You want the volume to be expandable, portable, and resilient in the event of failure of an individual USB hard drive. You need to create the required volume. What should you do? A. Create a new Storage Space across 4 USB hard drives. Set resiliency type to three-way mirror. B. Create a new spanned volume. C. Create a new Storage Space across 4 USB hard drives. Set resiliency type to parity. D. Create a new striped volume.
C. Create a new Storage Space across 4 USB hard drives. Set resiliency type to parity. Storage Spaces can combine multiple hard drives into a single virtual drive. To create a storage space, you have to connect two or more additional internal or external drives to the computer to create a storage pool. When the drive begins to fill up and nears the physical limit, Windows will display a notification prompting you to add additional physical storage space. Selecting the Parity resiliency type allows Windows to store parity information with the data, thereby protecting you from a single drive failure.
2. Which Windows Server 2016 data deduplication option is the best fit for general-purpose file servers? A. Hyper-V B. Backup C. Default D. Optimized
C. Default The Default Windows Server 2016 data deduplication option is the best fit for general-purpose file servers.
3. What is the module that you must install on a Windows Server 2016 host to support Docker? A. Sysinternals B. Docker C. DockerMsftProvider D. Hyper-V
C. DockerMsftProvider DockerMsftProvider is the module that you must install on a Windows Server 2016 host to support Docker. The PowerShell command is Install-Module -Name DockerMsftProvider -Repository PSGallery -Force.
9. Which of the following commands enables resource metering for a guest VM on a Windows Server 2016 Hyper-V host? A. Enable-VMMetering B. Enable-RMVM C. Enable-VMResourceMetering D. Enable-VMRM
C. Enable-VMResourceMetering Enable-VMResourceMetering is a PowerShell cmdlet that enables resource metering for a guest VM on a Windows Server 2016 Hyper-V host.
6. Which of the following operating systems cannot boot with Secure Boot enabled on Windows Server 2016 Hyper-V hosts? A. Ubuntu B. CentOS C. FreeBSD D. SUSE
C. FreeBSD FreeBSD is an example of a UNIX/UNIX-like operating system that cannot boot with Secure Boot enabled on Windows Server 2016 Hyper-V hosts. Selected versions of CentOS, Red Hat Enterprise Linux, SUSE, and Ubuntu Linux can use Secure Boot with Hyper-V.
5. What kind of Hyper-V virtual machines on a Windows Server 2016 Hyper-V host can use shared virtual disks? A. Generation 1 only B. Generation 2 only C. Generation 1 and Generation 2 D. Neither
C. Generation 1 and Generation 2 Both Generation 1 and Generation 2 Hyper-V virtual machines on a Windows Server 2016 Hyper-V host can use shared virtual disks.
8. In Windows Server 2016, which server role is a prerequisite for installing the Container feature? A. DNS B. Certificate Services C. Hyper-V D. IIS
C. Hyper-V In Windows Server 2016, the Hyper-V server role is a prerequisite for installing the Container feature.
10. What Hyper-V live migration authentication option forces the configuration of constrained delegation? A. SCP B. certificate C. Kerberos D. token-based
C. Kerberos Kerberos authentication forces the configuration of constrained delegation in Windows Server 2016 Hyper-V live migration.
5. Which of the following protocols offers storage area network (SAN) redundancy? A. iSNS B. NFS C. MPIO D. iSCSI
C. MPIO The Multipath Input/Output (MPIO) protocol offers storage area network (SAN) redundancy.
4. The Docker engine creates a(n) __________ network by default when the dockerd service first runs. A. L2 Bridge B. L2 Tunnel C. NAT D. Transparent
C. NAT The Docker engine creates a NAT network by default when the dockerd service first runs.
1. The Windows Server 2016 platform supports two main file systems. They are? (Choose all that apply.) A. FAT B. FAT32 C. NTFS D. ReFS
C. NTFS D. ReFS The Windows Server 2016 platform supports two main file systems: Windows NT File System (NTFS) and Resilient File System (ReFS). Although ReFS was new to Windows Server 2012, NTFS has been around for many years, and NTFS in Windows Server 2016 has been improved for better performance.
3. Which of the following is a computer memory design in which the memory access time depends on the memory location relative to the processor? A. UEFI B. PXE C. NUMA D. SLAT
C. NUMA Non-Uniform Memory Access (NUMA) is a computer memory design in which the memory access time depends on the memory location relative to the processor.
10. What tab appears by default when you first launch Resource Monitor in Windows Server 2016? A. Memory B. Network C. Overview D. CPU
C. Overview The Overview tab appears by default when you first launch Resource Monitor in Windows Server 2016.
10. Which Storage Spaces layout is similar to RAID 5? A. Simple B. Three-way mirror C. Parity D. Two-way mirror
C. Parity The Parity Storage Spaces layout in Windows Server 2016 is similar to RAID 5.
8. What upgrade type for an NLB cluster involves the least downtime? A. Dynamic upgrade B. Static upgrade C. Rolling upgrade D. Simultaneous upgrade
C. Rolling upgrade The rolling upgrade type involves the least downtime for a Windows Server 2016 NLB cluster.
3. What is the name of the SMB 3.0 feature that enables a share to be accessible by clients from all nodes in the cluster simultaneously? A. SMB Multichannel B. SMB Direct C. SMB Scale-out D. SMB Directory Leasing
C. SMB Scale-out Server Message Block (SMB) Scale-out is an SMB 3.0 feature that enables a share to be accessible by clients from all nodes in the cluster simultaneously.
3. Which NLB port rule filtering type essentially uses NLB as a failover cluster for that rule? A. Disable B. Multiple Host C. Single D. Enable
C. Single The Single Network Load Balancing (NLB) port rule filtering type essentially uses NLB as a failover cluster for that rule.
2. Where do you specify the WSUS server location in Group Policy? A. Windows Server Update Services Location B. Internal Update Server C. Specify Intranet Microsoft Update Service Location D. WSUS Database
C. Specify Intranet Microsoft Update Service Location Use the "Specify Intranet Microsoft Update Service Location" Group Policy setting to point client devices to your WSUS server.
9. Which Windows Server 2016 feature provides consistent performance to Hyper-V VMs, even in dense or overprovisioned environments? A. Storage Spaces B. Failover Clustering C. Storage QoS D. PowerShell Direct
C. Storage QoS Storage Quality of Service (QoS) is a Windows Server 2016 feature provides consistent performance to Hyper-V VMs, even in dense or overprovisioned environments.
4. By default, when each client computer first contacts the WSUS server, WSUS adds the client computer to the All Computers and ________ groups. A. Domain Computers B. Local Computers C. Unassigned Computers D. Unmanaged Computers
C. Unassigned Computers By default, when each client computer first contacts the WSUS server, WSUS adds the client computer to the All Computers and Unassigned Computers groups.
10. Which of the following is not a best practice for VM deployment in Windows Server 2016 Hyper-V? A. Set the minimum and maximum memory for each VM. B. Store VM files on their own volumes. C. Use static memory assignment. D. Avoid using differencing disks.
C. Use static memory assignment. Unless you have a compelling reason not to do so, you should use dynamic memory assignment to conserve RAM on the Hyper-V virtualization host.
10. Windows Server Backup writes its backup files in ______ format. A. ZIP B. BAK C. VHDX D. CAB
C. VHDX Windows Server Backup writes its backup files in VHDX format.
2. What technology delivers packets from an outside virtual machine network directly to a virtualized host operating system? A. SET B. RDMA C. VMQ D. FIFO
C. VMQ Virtual Machine Queue (VMQ) is a Windows Server 2016 Hyper-V technology delivers packets from an outside virtual machine network directly to a virtualized host operating system.
10. What is the minimum guest VM Windows Server version supported by Windows Server Hyper-V? A. Windows Server 2016 B. Windows Server 2012 R2 C. Windows Server 2012 D. Windows Server 2008 R2
C. Windows Server 2012 Windows Server 2012 is the minimum guest VM Windows Server version supported by Windows Server Hyper-V.
7. Networks without a default gateway are configured by Windows Server 2016 failover clustering for: A. any cluster communication B. client and cluster communication C. cluster communications only D. cloud communication only
C. cluster communications only Networks without a default gateway are configured by Windows Server 2016 failover clustering for cluster communications only.
6. Which Docker command saves any changes made to the current container to a new container image? A. image B. diff C. commit D. ps
C. commit The docker commit statement saves any changes to the current container to a new container image.
6. Shared-nothing Hyper-V live migration means that VMs: A. do not have to run Windows B. do not have to use Kerberos C. do not have to belong to a failover cluster D. do not have to support SMB 3.0
C. do not have to belong to a failover cluster Shared-nothing Hyper-V live migration means that virtual machines (VMs) do not need to be part of a failover cluster.
9. The ___________ script contains instructions for building a new Docker image. A. dockerbuild B. dockerpull C. dockerfile D. dockerimage
C. dockerfile The dockerfile script contains instructions for building a new Docker image.
8. In Windows Server 2016 Performance Monitor, you can define Data Collector Sets either manually or: A. from an import from the Registry B. from an HTML definition file C. from a predefined template D. from a Resource Monitor export
C. from a predefined template In Windows Server 2016 Performance Monitor, you can define Data Collector Sets either manually or from a predefined template.
10. If you have a Windows Server 2016 Hyper-V host that hosts several virtual machines and you need to isolate them, use ________ rather than VLANs. A. VMQ B. RDMA C. network virtualization D. SET
C. network virtualization If you have a Windows Server 2016 Hyper-V host that hosts several virtual machines and you need to isolate them, use network virtualization rather than VLANs.
7. Which docker run memory parameter specifies the total amount of memory plus virtual memory that the container can use? A. -m B. -kernel-memory C. -oom-kill-disable D. -memory-swap
D. -memory-swap The -memory-swap docker run memory parameter specifies the total amount of memory plus virtual memory that the container can use.
5. What port is used by Docker by default for secure connections? A. 4433 B. 4434 C. 2375 D. 2376
D. 2376 TCP port 2376 is used by Docker by default for secure connections.
7. On a server with three physical disks, the PhysicalDisk - Avg. Disk Queue Length counter value should not be larger than: A. 0 B. 1 C. 3 D. 6
D. 6 On a server with three physical disks, the PhysicalDisk - Avg. Disk Queue Length counter value should not be larger than 6, which is twice the number of physical disks installed on the server.
Chapter 6: Data Deduplication 1. Windows Server 2016 data deduplication gives you ___________ space savings for virtualization libraries. A. 30-50% B. 50-60% C. 70-80% D. 80-95%
D. 80-95% Windows Server 2016 data deduplication gives you 80-95 percent space savings for virtualization libraries. These libraries typically consist of virtual hard disk files and installer ISO, both of which contain a larger percentage of duplicate data.
10. What is a stretch cluster? A. A cluster with nodes in two different Active Directory domains. B. A cluster with nodes running Windows Server 2016 and Windows Server 2012 R2. C. A cluster with nodes utilizing 100 percent of a failover host's RAM D. A cluster with nodes in different geographic areas.
D. A cluster with nodes in different geographic areas. In Windows Server 2016 failover clustering, a stretch cluster is a cluster with nodes in different geographic areas.
3. What is the first step in deploying disaggregated S2D? A. Create virtual disks. B. Enable Storage Spaces Direct. C. Add the virtual disks to CSVs. D. Create a cluster.
D. Create a cluster. The first step in deploying disaggregated S2D is creating a failover cluster.
2. Which Performance Monitor tool is used to create baselines? A. Report Export B. Alerts C. Graphing D. Data Collector Set
D. Data Collector Set In Windows Server 2016 Performance Monitor, create Data Collector Sets (DCSs) to create system baselines.
7. What is the purpose of the -GenerateNewId switch parameter of the Import-VM cmdlet? A. Define a new IPv6 address B. Define a new hostname C. Define a new MAC address D. Define a new security identifier
D. Define a new security identifier The -GenerateNewId switch parameter of the Import-VM cmdlet defines a new security identifier (SID) for the new VM; this prevents conflicts with the original VM copy, which has the same SID.
2. You can use the _______ PowerShell cmdlet to clone a clustered Hyper-V VM. A. Get-VM B. Save-VM C. Clone-VM D. Export-VM
D. Export-VM You can use the Export-VM PowerShell cmdlet to clone a clustered Hyper-V virtual machine (VM).
1. Which of the following is NOT an option for a virtual switch in Windows Server 2016 Hyper-V? A. Internal B. Private C. External D. Firewall
D. Firewall Windows Server 2016 Hyper-V includes three virtual switch types: Internal, External, and Private.
7. Your VMs must use the ____________ virtual hard disk format to participate in shielded VM environments. A. VHD B. EPT C. Generation 1 D. Generation 2
D. Generation 2 Your VMs must use the Generation 2 virtual hard disk format to participate in shielded VM environments.
2. Which of the following is not an operating system installation option in Windows Server 2016 Hyper-V Manager? A. Install an operating system later B. Install an operating system from a bootable image file C. Install an operating system from a network-based installation server D. Install an operating system by downloading from the Microsoft Website
D. Install an operating system by downloading from the Microsoft Website In Hyper-V Manager, the three operating system installation options are "Install an operating system later," "Install an operating system from a bootable image file," and "Install and operating system from a network-based installation server."
5. Which PowerShell command is used to install Hyper-V on a Windows Server 2016 server? A. Check-HyperV B. Install-HyperV C. Invoke-WindowsFeature D. Install-WindowsFeature
D. Install-WindowsFeature The Install-WindowsFeature PowerShell command is used to install Hyper-V on a Windows Server 2016 server.
6. What does a return value of 1 mean in terms of node fairness when you run the PowerShell statement (Get-Cluster)AutoBalancerMode on a failover clustering host? A. Load balancing is disabled. B. Load balancing occurs when a node joins the cluster and every 30 minutes thereafter. C. Node fairness is disabled. D. Load balancing occurs only when a node joins the cluster.
D. Load balancing occurs only when a node joins the cluster. If you run the PowerShell statement (Get-Cluster)AutoBalancerMode on a failover clustering host and receive a return value of 1, that means that load balancing occurs when a node joins the cluster.
5. A company has client computers that run Windows Server 2016. Each computer has two hard drives. You need to create a dynamic volume on each computer that maximizes write performance with data fault tolerance. Which kind of dynamic volume should you create? A. Striped Volume B. RAID 5 Volume C. Spanned Volume D. Mirrored Volume
D. Mirrored Volume A mirrored volume duplicates data across two disks. This type of volume is fault tolerant because if one drive fails, the data on the other disk is unaffected.
8. Which of the following is a valid Hyper-V virtual switch extension? A. SET B. MAC spoofing C. RDMA D. NDIS capture
D. NDIS capture NDIS capture is one of two extensions available for Windows Server 2016 Hyper-V virtual switches. The other extension is the Microsoft Windows Filtering Platform.
2. Which of the following statements is true concerning Windows Server 2016 NLB? A. An NLB cluster can contain up to 16 hosts. B. NLB hosts must be configured identically. C. An NLB host can have only a single network adapter. D. No shared storage is required.
D. No shared storage is required. It is true that in Windows Server 2016 Network Load Balancing (NLB), no shared storage is required.
10. Complete the PowerShell command: Install-_________ -Name docker -ProviderName DockerMsftProvider. A. Module B. WindowsFeature C. DockerEngine D. Package
D. Package The correct PowerShell command is Install-Package -Name docker -ProviderName DockerMsftProvider.
7. Which of the following statements is false concerning NTFS permissions? A. File permissions always take precedence over folder permissions. B. Permissions are cumulative. C. Deny permissions always override Allow permissions. D. Permissions propagate from the bottom up through inheritance.
D. Permissions propagate from the bottom up through inheritance. NTFS permission always propagate from the top folder down to child objects through inheritance.
3. Which of the following is NOT a valid Hyper-V replica failover option? A. Test Failover B. Planned Failover C. Unplanned Failover D. Scheduled Failover
D. Scheduled Failover The three Hyper-V replica failover options are Planned Failover, Unplanned Failover, and Test Failover.
9. Which PowerShell command will drain the VMs from the current failover clustering node? A. Test-ClusterResourceFailure B. Stop-ClusterGroup C. Stop-ClusterResource D. Suspend-ClusterNode
D. Suspend-ClusterNode The Suspend-ClusterNode PowerShell command drains the VMs from the current failover clustering node to a healthy node in the cluster.
5. Which of the following network technologies is compatible with SET in Windows Server 2016? Hyper-V? A. 802.1x authentication B. IPSec TO C. QoS D. RDMA
D. RDMA Remote Direct Memory Access (RDMA) is compatible with Switch Embedded Teaming (SET) In Windows Server 2016 Hyper-V.
1. Which Windows Server 2016 Hyper-V term describes the replication of VMs from one host to a second, and then from the second host to the third? A. change tracking B. failover C. recovery point D. extended replication
D. extended replication The term "extended replication" in Windows Server 2016 Hyper-V describes the replication of VMs from one host to a second, and then from the second host to the third.
7. Beginning with ____________, you do not have to stop or pause the VM in order to export it from the host. A. Windows Server 2008 B. Windows Server 2008 R2 C. Windows Server 2012 D. Windows Server 2012 R2
D. Windows Server 2012 R2 Beginning with Windows Server 2012 R2, you do not have to stop or pause the virtual machine (VM) in order to export it from the Windows Server 2016 Hyper-V host.
7. Which of the following is NOT a valid way to manage Windows Defender in Windows Server 2016? A. Group Policy B. PowerShell C. WMI D. XML
D. XML You can manage Windows Defender on Windows Server 2016 by using Group Policy, PowerShell, or Windows Management Instrumentation (WMI).
5. A new WSUS server can synchronize its content with either Microsoft Update or: A. A SQL Server database server B. an up-to-date client computer C. a downstream WSUS server D. an upstream WSUS server
D. an upstream WSUS server A new WSUS server can synchronize its content with either Microsoft Update or an upstream WSUS server.
5. Which of the following is NOT a valid witness type in Windows Server 2016 failover clustering? A. cloud witness B. file share witness C. disk witness D. cluster witness
D. cluster witness The three valid witness types in Windows Server 2016 failover clustering are disk witness, file share witness, and cloud witness.
10. What term describes the synchronization among NLB cluster hosts? A. affinity B. utilization C. unification D. convergence
D. convergence Convergence is the term used to describe the synchronization that occurs among NLB cluster hosts.
8. What command would be used to remove the host from the iSNS server? A. iscsicli addisnsserver <server_name> B. iscsicli refreshisnsserver <server_name> C. iscsicli listisnsservers <server_name> D. iscsicli removeisnsserver <server_name>
D. iscsicli removeisnsserver <server_name> The removeisnsserver removes the host from the iSNS server. The iscsicli addisnsserver <server_name> command manually registers the host server to an iSNS server. Refreshisnsserver refreshes the list of available servers. Listisnsservers lists the available iSNS servers.
9. File _________ refers to descriptive properties of a file that are not related to its content. A. stream B. system C. filter D. metadata
D. metadata File metadata refers to descriptive properties of a file that are not related to its content.
8. New virtual machines in Windows Server 2016 now support ___________ checkpoints by default. A. standard B. high-priority C. low-priority D. production
D. production New virtual machines in Windows Server 2016 now support production checkpoints by default.