AE2 Exam MAR 18
What is the DC resistance of most motor armatures?
0.05 to 0.5 ohms
How many major categories is the total length of time an equipment's mission capability is impaired divided into?
2
How many states does oxygen come in?
2
How many different ways are Rapid Action Minor Engineering changes (RAMECs) categorized as?
3
How many different ways are deficiencies categorized as?
3
How many different ways are deficiencies classified as?
3
How many fundamental conditions are there which must exist before a voltage can be produced by magnetism?
3
How many levels is the Department of the Navy's maintenance concept?
3
The total power loss in a transformer is a combination of how many types of losses?
3
Those activities with less than how many gas free engineering (GFE) requirements in a 6-month period may request the services of the supporting I-level AVGFE technician?
3
Transistors are semiconductor devices with how many or more terminals?
3
What is the maximum interval between Engine Test Cell Correlations to maintain engine performance integrity?
3 years
How many electrons are equal to one coulomb?
6,280,000,000,000,000,000
The remaining how many characters of the PI are called the technical manual (TM) identifier?
6
Which device is capable of supplying and maintaining voltage or electromotive force (emf)?
6
Which program was designed to ensure a safe environment when working on aeronautical fuel cells and tanks?
Aircraft Confined Space Program
What is a solid whose atoms or molecules are arranged in a three-dimensional geometrical pattern commonly referred to as a lattice called?
Crystal
What is a short-circuit protection device that automatically limits the current to a safe value?
Current Limiter
Which wire property is used to determine what size is needed for a given load, or current drain?
Current rating
Which circuitry provides a constant current output?
Current regulator
Which program was established to ensure the customer receives a product which satisfies their needs and requirements?
Customer Liaison
Which type of meter movement do most multimeters use?
D'Arsoval
Which maintenance level do QA specialists have to be at to accomplish Type 1 verifications?
D-level
What type of motors are variable speed motors?
DC
The MOSFET is normally constructed so that it operates in one of what two basic modes?
Depletion of Enhancement
All a/c maintenance functions are divided into 3 distinct levels-organizational, intermediate and what else?
Depot
Which level of maintenance includes overhaul and major repair or modification of a/c, components and equipment?
Depot
Which program provides monitoring, analysis and specialized knowledge to initiate preventive actions that are effected by engineering, production and other departments?
Depot Level Quality Program (DLQP)
Which stage is the best time to prevent corrosion?
Design
What are highly effective in attacking and dissolving grease and oil on metal surfaces of SE?
Detergents and solvents
Which type of inductor power loss is due to core heating caused by circulating currents induced in an iron core by the magnetic field of the coil?
Eddy-current
What is the difference of potential or voltage which exists between two points in an electrical circuit called?
Electromotive force
What is defined as the directed flow of electrons?
Electron current
What is the amount of energy required by an electron to stay in orbit?
Electron energy level
Which theory states that all matter is composed of atoms and the atoms are composed of smaller particles called protons, electrons, and neutrons?
Electron theory
Which Information Technology system will be used to document corrective and preventive actions?
Electronic continual Analysis and Metrics (eCAM)
The chemical activity of an atom is determined by the number of what in its valence shell?
Electrons
Which type of items are all solid state electronic components and assemblies containing such components considered to be unless otherwise directed by higher authority?
Electrostatic Discharge Sensitive (ESDS)
What is defined as the ability to do work?
Energy
What is a high-temperature insulation used extensively in a/c and equipment installations?
Extruded polytetrafluoroethylene
What are all Navy activities assigned for determining priorities for material support based on their mission?
FAD
Maintenance control assigns a priority to individual material requisitions according to the military importance and the urgency of need of the item. Most fleet operational activities have what assigned?
FAD 2 or 3
Aluminum and magnesium form corrosion products that are white oxides or what else?
Hydroxides
Which type of inductor power loss is due to power that is consumed in reversing the magnetic field of the core each time the current direction changes?
Hysteresis
What is a heat loss caused by the magnetic properties of the armature called?
Hysteresis loss
Which type of maintenance enhances and sustains the combat readiness and mission capability of supported activities?
I-level
what lets intermediate maintenance activity (IMA) personnel determine if they can repair an individual item based on its SM&R code?
ICRL
What supports the squadron and helps the supply department support the squadrons?
IMAs
What identify material requirements and provides a basis for SE procurement?
IMRLs
What contains a list of weapons systems component parts keyed to simple illustrations?
IPB
What shows and lists procurable assemblies and detail parts so you can quickly identify assemblies and their components?
IPB
What provide the instructions required for the efficient performance of scheduled maintenance tasks?
Maintenance Requirement Cards
What are used to present the maintenance tasks required to maintain the equipment in an effective operational status?
Maintenance Requirement Cards (MRCs)
Which program identifies tasks, skills and knowledge requirements for each Military Occupational Specialty (MOS)?
Maintenance Training Management and Evaluation Program (MATMEP)
Which program includes the training associated with all aircraft, Marine Corps maintenance personnel, O-level and Fleet Readiness Center (FRC) aircraft SE maintenance personnel, and other ground aviation support personnel in Occupation Fields 59 and 70?
Maintenance Training Management and Evaluation Program (MATMEP)
Nothing happens to any a/c without whose approval?
Maintenance chiefs
What is at the nucleus of the production divisions?
Maintenance control (M/C)
Printed circuit boards are stacked and connected together to form a module using what technique?
Modular circuitry
Which form is used to record significant information affecting the a/c for which no other space is provided in the logbook?
Miscellaneous/History (CNAF 4790/25A)
What is essential to perform specific missions and achieve required material condition readiness, maintenance standards, supply system effectiveness and safety requirements of OPNAVINST 3710.7?
Mission Essential Subsystems Matrix (MESM)
What is a combination of elements and compounds that are not chemically combined that can be separated by physical means called?
Mixture
The organizational structure of a/c maintenance activities uses the principle and concepts of what?
Modern Management
What provides OMA, IMA and aviation supply department activities with a modern, real time, responsive, computer-based management information system?
NALCOMIS
Which method is used for reporting hazardous deficiencies in material, publications, substandard workmanship, and improper QA procedures?
NAMDRP
An important objective of the what is to achieve and maintain maximum material readiness, safety and conservation of material?
NAMP
Billet descriptions are prepared for QA division personnel to ensure that all QA functions and responsibilities, covered in the what?
NAMP
The corrosion control program established by the what is an ALL HANDS participation concept?
NAMP
All TDs are issued by NAVAIR or what else, except in cases where the time delay in obtaining approval is unacceptable?
NATSF
What is the Navy's single integrated training feedback system?
Navy Training Feedback System
Which type of cells are being used extensively in many military applications that require a cell with a high discharge rate?
Nickel-cadmium
Landing gear struts, hydraulic accumulators, and various air storage bottles found on most naval a/c must be serviced with compressed air or what else?
Nitrogen
What aluminum alloys are the primary type of aluminum used on naval a/c?
Nonclad
What are generally referred to as "insulators" or "insulating materal."?
Nonconductors
Quality Organization Officers along with which other officer may not be appointed as chairperson of Foreign Object Damage Prevention Committees?
Safety Officer
Which type of rotor is used in low-speed alternators?
Salient-pole
What are the two common types of synchro rotors in use?
Salient-pole and Drum/Wound
What in seawater and in the air are the largest single cause of aircraft corrosion?
Salt
Both the Navy and Air Force use what scale for determining engine oil viscosity?
Saybolt
What is the technician's main aid in troubleshooting a circuit in a piece of equipment?
Schematic Diagram
Which type of small generator generates a voltage proportional to its shaft speed?
Tachometer
What provides information to the pilot and crew on how to "flight" the a/c?
Tactical Manual
Which type of diagram is used in connecting wiring to terminal boards, relays, switches, and other components of a circuit?
Terminal
What connects the circuit breaker to the power source and the load?
Terminal connectors
When stator voltages are measured, reference is always made to what voltages instead of to a single coil's voltage?
Terminal to terminal
All sources of electromotive force have some form of internal resistance which causes a drop in what as current flows through the source?
Terminal voltage
What is usually expressed as the change in voltage from a no-load condition to a full-load condition, and is expressed as a percentage of full-load?
Voltage Regulation
What is an imposed action, usually through an external adjustment, for the purpose of increasing or decreasing terminal voltage?
Voltage control
How are potentiometers always connected as?
Voltage dividers
What are used primarily to develop high voltages where low current is required?
Voltage multipliers
Which fuse property indicates the ability to quickly extinguish that arc after the fuse of element melts and the maximum voltage the open fuse will block?
Voltage rating
Which switch property refers to the maximum voltage allowable in the circuit in which the switch is used?
Voltage rating
The change of voltage from full load to no load, expressed as a percentage of full-loads volts, when the speed and DC field current are held constant in an alternator is known as what?
Voltage regulation
What manuals are divided by functions and tasks?
WP
What is the chemical action called that occurs in the cell while the current is flowing causes hydrogen bubbles to form on the surface of the anode?
polarization
What is the rate at which work is being done referred to as?
power
Most naval a/c are refueled by what fueling system?
pressure
What is the nucleus of the AIMD?
production control
What carries a positive charge of electricity equal and opposite to the charge of the electron?
proton
Which brittle gold-aluminum compound is formed when bonding gold to aluminum?
purple plague
What are the two major types of maintenance?
rework and upkeep
Which type of maintenance can be defined as maintenance that is required by hours, calendar periods (days or weeks), and starts?
scheduled
Which type of diagram is used to trace the circuit and its functions without regard to the actual physical size, shape, or location of the component devices or parts?
schematic
Which term means that the switch is a switch in which the movement of the switch mechanism (contacts) is relatively independent of the activating mechanism movement?
snap-acting
What is necessary to hold the wire strands together and to aid in fastening the wires to terminal studs since most cable wires are stranded?
spagheti
What inspection is a scheduled inspection with a prescribed interval other than daily or phase?
special
What can be done to increase the flexibility of wire?
stranding
What is the coating of the material to be soldered with a light coat of solder called?
tinning
What is the electrochemically applied oxide coating called which is used to protect some aluminum parts?
Anodize
What is the most common surface treatment of nonclad aluminum alloy surfaces?
Anodizing
Which type of inspections are conducted as a result of a specific over limit condition or as a result of circumstances or events which create an administrative requirement for an inspection?
Conditional
How many different levels of preservation are used on naval a/c?
3
What is the appearance of light-colored spots after desoldering?
Measling
There are over how many elements?
100
What evaluations are conditional maintenance actions that are depot-level evaluations of an a/c's general material condition?
ASPA
Which two page form provides data tracking on assemblies?
ASR
What department is usually the largest department in most operating units or activites?
A/C Maintenance
What combines the forces of oil solvents and detergent cleaners in removing grease, oil, light rust, and other contaminants?
Acid cleaning
What is the preferred topcoat material for a/c markings that identify the reporting custodian and for propeller safety stripes?
Acrylic lacquer
What division of the I-level maintenance department functions as the coordinator for all records and reports, directives, correspondence and personnel matters for the department?
Admin
Which system provides the Offices of the Secretary of Defense, the Department of the Navy (DON) and subordinate commands with comprehensive information of Navy and Marine Corps a/c?
Aircraft Inventory and Readiness Reporting System (AIRRS)
What are prepared on a systems maintenance concept, and they appear in two basic formats, conventional and work package?
Aircraft MIMs
Which program is an inventory management and reporting system for SE at O-level, I-level and D-level activities?
Aircraft Maintenance Material Readiness List (AMMRL)
What is the treatment of zinc with mercury called?
Amalgamating
Which program establishes policy, responsibilities and requirements for implementing and maintaining techniques to prevent contamination of a/c oxygen systems and components through careful and safe handling, surveillance and quality control?
Aviators Breathing Oxygen (ABO)
What is defined as that maintenance time when no work is being performed by any work center involved in the inspection?
Awaiting maintenance (AWM)
Amplifiers biased so that collector is cut off during one-half of the input signal are classified as what class?
B
Which project code is assigned by the Intermediate Maintenance Activity when requisitioning material to repair SE that is inoperative and a workaround, redundancy, or local backup is available?
BKO
What is the electrostatic field called that is created by the positive and negative ions in the depletion region?
Barrier
Which reports are used to report NTCSS Optimzed OMA NALCOMIS baseline deficiencies found in a specific Program Manager-Air (PMA) baseline?
Baseline Trouble Report (BTR)
What consists of a number of cells assembled in a common container and connected together to function as a source of electrical power?
Battery
Which type of voltage source that uses a chemical action to produce a voltage?
Battery
What fumes cause rapid corrosive attack on unprotected surfaces?
Battery electrolyte
What is the resulting substance called when two or more elements are chemically combined?
Compound
Who is credited with first using the terms POSITIVE and NEGATIVE to describe the two opposite kinds of electricity?
Benjamin Franklin
What is the relationship of collector current (output current) to base current (input current)?
Beta
What is an external voltage applied to an PN junction called?
Bias
What areas are natural collection points for waste, hydraulic fluids, water, dirt, loose fasteners, drill shavings, and other debris?
Bilge
The Naval Aviation News is published how often for the Chief of Naval Operations (CNO) by NAVAIRSYSCOM and the Naval Historical Center?
Bimonthly
What colors are electrical power tool or appliance conductors in the three-wire cable color-coded?
Black, white, and green
Which type of current does not flow through any of the load devices?
Bleeder
The equivalent resistance of a parallel circuit is always less than the resistance of any what?
Branch
Terminals used for wire or component lead terminations are normally made of what with a solderable coating?
Brass
Which type of Intermediate Maintenance Activity (IMA) SE report occurs when there is an item of inoperative SE and there is no redundancy in that piece of SE or the redundancy is inadequate such that a/c support will be impacted, thereby, jeopardizing the operational readiness of supported units?
Broad Arrow (BA)
Which type of message will be used to forward a jet engine test cell malfunction report to the Aircraft Controlling Custodian (ACC)/Type Commander (TYCOM) when a facility becomes inoperative to the extent that an unacceptable production delay is anticipated?
Broad Arrow (BA)
What is an interim document comprised of instructions and information and directs a onetime inspection to determine whether a given condition exists?
Bulletin
Which type of TD directs a one-time inspection to determine if a given condition exists and specifies what action shall be taken if the condition is found?
Bulletin
What type of tool is used to clean the contacts of a relay?
Burnishing
What is the TD form number?
CNAF 4790-24A
Which device stores electrical energy in an electrostatic field?
Capacitor
When large amounts of power and a higher degree of accuracy are required, as in the movement of heavy radar antennas and gun turrets, torque synchro systems give way to the use of what type of synchros?
Control
Which type of synchros are used in systems that are designed to move heavy loads such as gun directors, radar antennas, and missile launchers?
Control
What is a group of components that are linked together to perform a specific purpose?
Control system
What are the two most commonly used conductors?
Copper and Aluminum
What is the most popular type of primary cell?
Dry cell
All personnel considered for selection as a QAR should be in what grade or above?
E-6
Which band are electrons never found in, but may travel back and forth through it, provided they do not come to rest in the band?
Forbidden
What is assigned to all navy activities to determine priorities for material support based on their mission?
Force Activity Designator (FAD)
Which type of TD is the primary COMNAVAIRSYSCOM document for implementing a configuration change?
Formal Change
In-servicing training is conducted in two methods; what are they?
Formal and informal
Which main component of a circuit breaker provides an insulated housing and is used to mount the circuit breaker components?
Frame
What is the number of complete cycles of alternating current or voltage completed each second referred to as?
Frequency
Which type of corrosion occurs at contact areas between materials under load subject to repeated vibration?
Fretting
What is caused by a slight vibration, friction, or slippage between two contacting surfaces that are under stress and heavily loaded?
Fretting corrosion
What is one of the easiest ways to create a static charge?
Friction
What is the simplest form of damping?
Friction
What is a cotton cloth that has been treated with a sticky rubber compound called?
Friction tape
Which program establishes policy, responsibilities and requirements for implementing procedures to maintain a satisfactory level of a/c and engine fuel systems purity?
Fuel Surveillance Program (NAMPSOP)
What is the basic unit of inductance?
Henry (H)
What are the two general classifications of integrated circuits?
Hybrid and monolithic
which program establishes policy, responsibilities and requirements for implementing and maintaining techniques to achieve and maintain a satisfactory level of fluid purity in hydraulic systems and provides for safe and efficient operation of naval a/c weapon systems and SE?
Hydraulic Contamination Control Program (HCCP)
What is a powerful tool that can control even the most difficult corrosion problem?
Preventive maintenance
Which Technical Directive category is assigned when unsafe conditions exist which, if uncorrected, could result in fatal or serious injury to personnel or extensive damage to or destruction of valuable property?
Immediate Action
What TDs are issued when an uncorrected, unsafe condition exists that could result in fatal or serious injury to personnel, or extensive damage to or destruction of valuable property?
Immediate action
AC circuits containing reactance also contain resistance, the two combine to oppose the flow of current. What is this combined opposition by the resistance and the reactance called?
Impedance
What are two sine waves that are precisely in step with one another said to be?
In phase
Who is directly responsible to the AMO for the overall productive effort and material support of the department?
MMCO
What is the resistance to current leakage through the insulation materials called?
Insulation resistance
In which process does an atom lose or gain electrons?
Ionization
What are the points where the current divides called?
Junctions
What is the most widely used type of secondary cell?
Lead-acid
What is defined as "the efficient attainment of objectives"?
Management
What is present in air as a gas or as finely divided droplets of liquid?
Moisture
What is the speed of induction motors dependent on?
Motor design
When a generator delivers current to a load, the armature current creates a magnetic force that opposes the rotation of the armature that is called what?
Motor reaction
What are used to turn mechanical devices, such as water pumps, grinding wheels, fan blades, and circular saws?
Motors
Which type of meter movement is the most commonly used movement for ac meters?
Moving-vane
What is the most common measuring device used in the Navy?
Multimeter
What contains safety precautions applicable to forces afloat?
OPNAVINST 5100.19
What allows you to regulate events, rather than have them regulate you?
Prevention
Which type of training consists of personnel performing maintenance tasks, by demonstration and simulation, under the supervision of designated, qualified personnel?
On-Job Training (OJT)
What reduces the contact area of the tire, causing it to wear faster at the tread center?
Overinflation
What is a particularly active form of oxygen which is formed naturally during thunderstorms, by arcing in electrical devices and by photochemical reactions in smog?
Ozone
What form are electrolytes in dry cells?
Paste
What is the maximum value reached during one alternation of a since wave called?
Peak value
Arsenic, antimony, bismuth, and phosphorous are all what type of impurities?
Pentavalent
What is current called that flows in pulses in the same direction?
Pulsating DC
What is used to expedite the dissemination of urgent operation and maintenance change information?
RAC
What is a message TD, which provides for quick action on minor changes that offer significant advantages to the operating forces?
RAMEC
A voltage divider containing resistance and capacitance is connected in a circuit by means of a switch. What is such a series arrangement called?
RC series circuit
Which terms are AC voltages normally specified in?
RMS values
What division is optional and may be established when responsibilities concerning the operation and maintenance of aerial or surface targets are extensive?
RPV
Changes are issued as either routine or what else?
Rapid Action Changes
Which type of splice is used for connecting branch circuits in a junction box?
Rattail
What is the process called of reversing the chemical action that occurs as the cell discharges?
Recharging
Most power supplies are made up of the following four basic sections: transformer, rectifier, filter, and what else?
Regulator
What maintains the output of the power supply at a constant level in spite of large changes in load current or input line voltages?
Regulator
Lead-sheathed cable is one of 3 types currently being used: alloy lead, pure lead, and what else?
Reinforced lead
Most circuit control devices are either switches, solenoids, or what else?
Relays
What is used as a guide in making structural repairs to the airframe?
SRM
What is the opposition that a material offers to the magnetic lines of force called?
Reluctance
What is a standardized system that provides controlled soldering and desoldering of all types of solder joint configurations?
Repair Station Power Unit
Soldering fluxes are divided into 3 classifications or groups: Chloride (commonly call ACID), Organic, and what else?
Rosin
What is used to cause the circuit breaker closest to the faulty circuit to trip?
Selective tripping
What is a generator that supplies its own field excitation called?
Self-excited
Many capacitors will use oil with another dielectric material to prevent arcing between the plates. If arcing should occur between the plates of an oil-filled capacitor, the oil will tend to reseal the hole caused by the arcing. What is such a capacitor referred to as?
Self-healing
What is the EMF induced in the conductor carrying the current called?
Self-induced
How often at a minimum must all plane captains and naval aircrewman receive a monitor by a qualified plane captain QAR/CDQAR to ensure their currency and proficiency in plane captain duties?
Semi-Annually
What along with other publications, such as maintenance digests, prepared by weapons systems and equipment manufacturers are neither authorized nor approved for distribution to naval personnel?
Service Bulletins
Which type of system uses a weak control signal to move large loads to a desired position with great accuracy?
Servo system
The AVCAL is comprised of how many basic parts?
Seven
Up to how many electrical conductors does MI cable have?
Seven
What are used for diagrams and schematics to highlight the areas containing the changed information?
Shading and screening
What are the two types of metallic wire protection?
Sheath or armor
What is the most popular and efficient type of transformer core?
Shell core
What are the groups of orbits called that electrons reside in?
Shells
The exposure of an a/c to corrosion damage is greatest when the a/c is dirty, inactive ,or being what?
Shipped
What is an accidental path of low resistance which passes an abnormally high amount of current called?
Short circuit
Which type of condition exists if the anode and cathode of a cell are connected together without a load?
Short circuit
What is a resistor called that is in parallel with the meter movement?
Shunt resistor
Field coils consist of many turns of small wire which are connected in parallel with the load in what type of generator?
Shunt-wound
Which kind of power is used for homes, shops,and ships to operate portable tools and small appliances?
Single-phase
Which device furnishes the electrical energy used by the load?
Source
What is a comprehensive depot-level inspection of selected a/c structures and materials, correction of critical defects, incorporation of certain technical directives and limited removal and rework of scheduled removal components?
Standard rework
What was designed to provide operating units with a sufficient number of safe, reliable, mission capable a/c to perform their assigned missions?
Standard rework
What is created whenever two substances (solid or fluid) are rubbed together or separated?
Static electricity
Which type of corrosion is the intergranular or transgranular cracking of a metal caused by the combined effects of constant tensile stress (internal or applied) and corrosion?
Stress
Which form of corrosion are many alloys used in a/c construction sensitive to?
Stress corrosion cracking
Which form is used to monitor structural life limited components designated for D-level replacement which do not require Scheduled Removal Component (SRC) or Assembly Service Record (ASR) documentation?
Structural Life Limits (CNAF 4790/142)
The atoms of each element are made up of electrons, protons, and, in most cases, neutrons, which are collectively called what?
Subatomic particles
Which type of switch is controlled by a person?
Switch
Aluminum, indium, gallium, and boron are all what type of impurities?
Trivalent
What is the time required to charge a capacitor to 63% of full charge or to discharge it to 37% of its initial voltage known a what property of the circuit?
Time Constant (TC)
Which type of meter consists of a resistance wire across the meter terminals which heats in proportion to the amount of current?
Thermocouple
What is one of the most common types of plastic insulating materials?
Thermoplastic
What position of the SM&R code identify maintenance-level codes?
Third and fourth
Whose discovery of thermionic emission opened the door to electronic technology?
Thomas Edison's
The NAVIAR manual publication number is divided into how many parts, separated by a dash?
Three
What is by far the most common of all alternators in use today?
Three-phase
Which investigative procedure is conducted on high value, long lead time and other critical parts for which little or no failure history is available?
Threshold Sampling
All components are wired into place, repair of cards requires special training and/or special equipment, and some cards cannot be economically repaired because of their complexity (these are referred to as what)?
Throwaways
Multicontact switches are usually classified by the number of poles and number of what?
Throws
The greatest challenge to the a/c industry is the design of equipment that is protected from corrosion and deterioration in the heat and humidity that prevails in which region?
Tropics
Which type of corrosion is probably the most common type?
Uniform surface
What is used to report maintenance repair actions?
VIDS/MAF
The power handling capacity of a transformer is measured in either the volt-ampere unit or what other unit?
Watt
What unit is the basic unit of power?
Watt
What is used to measure electric power?
Wattmeter
What is the heat dissipating capability of a resistor measured in?
Watts
What type of winding is used in DC generators employed in high-voltage applications?
Wave
Which type of patterns are plotted on graph paper that result from changes in amplitude with respect to time?
Waveform
What is the distance from zero to the maximum value of each alternation called?
Wavelength
What checklists are abbreviated step-by-step procedures taken from the amplified procedures displayed in the weapons or stores loading manuals?
Weapons Loading
Which theory assumes that all magnetic substances are composed of tiny molecular magnets?
Weber's theory
How often at a minimum must validation of Awaiting Part (AWP) items using the Awaiting Part (AWP) list provided by the aviation support division be performed jointly with the Awaiting Part (AWP) unit?
Weekly
Validation of AWP items, using the AWP list provided by the aviation support division (ASD), is performed jointly with the AWP unit in supply at least how often?
Weekly
Which type of splice is used to join small, solid conductors?
Western union
What are the two types of primary cells?
Wet and Dry
Which level of maintenance is work performed by an operating unit on a day-to-day basis in support of its own operations?
organizational
What areas are probably receives more punishment than any other area on the a/c?
Wheel well
Changes to illustrations, line drawings and photographs are normally identified by a miniature what?
pointing hand
Pre-insulated permanent copper splices are used to join small copper wire AWG sizes no.26 through what?
no.10
What tools must be used when work is done on any part of a system or unit that is designed for storing or handling combustible liquids?
nonspark
Which resistor value is the voltage drop across a resistor in a series circuit proportional to?
ohmic
What can be used to do away with most of the ripple in a generator that has only one or two armature loops and has high ripple voltage?
Windings
Which Work Center is responsible for managing and performing calibration and repair on selected Test, Measurement and Diagnostic Equipment (TMDE)?
Work Center 670
Who is responsible for assisting Quality Assurance (QA) in implementing Maintenance Department/Division safety?
Work Center Supervisor (WCS)
Which form is used to request work or assistance from a Fleet Readiness Center (FRC) overhaul point that is beyond the activity capability?
Work Request Customer Service (OPNAV 4790/36A)
What are the two categories of audits?
Work center and special
Which capacitor property is the maximum voltage that can be steadily applied without danger of breaking down the dielectric?
Working voltage
Which war was the mercuric-oxide zinc cell (mercury cell) which is a primary cell developed?
World War 2
Material Control codes D E G H Q or what else identify mandatory turn-in repairables (MTRs) that must be turned in to the local supply department when they become unserviceable?
X
Which formula is used to determine the total reactance of a series AC circuit?
X=XL-XC X=XC-XL
What is the primary means of recording a/c status changes, from acceptance into the inventory until final strike?
XRAY
Which preservatives must not be used around oxygen fittings or oxygen regulators since fire or explosion may result?
oil-based
Which wire sizes are yellow (dull) terminal lugs or splice insulation to be used on?
#12-#10
What are sizes are red terminal lugs or splice insulation to be used on?
#22-#20, #18
Which wire sizes are yellow (bright) terminal lugs or splice insulation to be used on?
#26-#24
Thin film is the term used to describe a technique for depositing passive circuit elements on an insulating substrate with coating to a thickness of what?
0.0001 centimeter
Common values of mica capacitors range from approximately 50 picofarads to what?
0.02 microfarad
The tank truck should be driven to a point as far from the a/c as the length of hose permits, but never within how many feet of the a/c , and preferably to the windward (upwind) side of the a/c?
10
How high can the ratio of varactor capacitance to reverse-bias voltage change be?
10 to 1
A plus or minus deviation of what percent of the engine inspection interval is allowed for scheduling purposes unless otherwise directed by Periodic Maintenance Information Cards (PMICs)?
10%
Aluminum alloy can fail by stress corrosion cracking when subjected to a stress which is only what percent of its rated strength?
10%
When added to stainless steel alloys, the stress corrosion resistance increases with nickel contents above what percentage?
10%
Tests have shown that body resistance under unfavorable conditions may be as low as 300 ohms, and possibly as low as how many ohms form temple to temple if the skin is broken?
100
The preoiler (PON-6) will deliver oil at a pressure up to what psi?
100
What is the life expectancy of the LED?
100,000+ hours
In the tunnel diode, the semiconductor materials used in forming a junction are doped to the extent of how many impurity atoms for ten-million semiconductor atoms?
1000
Titanium and titanium alloys find numerous uses in aircraft, engines and missiles up to which temperature?
1000 F
Ideal growth conditions for most fungi and bacteria are temperatures between 68 and what?
104 F
Synchros used in shipboard equipment are designed predominately for how many volts?
115
The 2M repair equipment operates on what type of power?
115-volt, 60-hertz
Compass systems must be calibrated at least once every how many months from the last calibration?
12
How many months at a minimum is it recommended that the Naval Aviation Maintenance Discrepancy Reporting Program (NAMDRP) Program Manager be assigned for to ensure continuity?
12
Spot ties are used when cable supports are used that are more than how many inches apart?
12
The RCN is composed of how many elements?
12
An a/c will be considered NMC only if panels and equipment removed to conduct area inspections cannot be replaced within how man hours?
2
Approximately how many volt does the Magnesium-Manganese Dioxide Cell produce?
2
How many System Administrators must OMA NALCOMIS Optimized squadrons attend the NALCOMIS OOMA System Administrator course?
2
How many categories of SE/TDs are there?
2
How many classes are prime movers divided into for generators?
2
How many compasses at a minimum will be carried onboard all naval aircrafts?
2
How many conditions must exist for a control transformers (CT) to be on electrical zero?
2
How many different ways are Interim Change Technical Directives categorized as?
2
How many steps are required to add a/c to the Naval inventory?
2
How many years is the recommended Target Completion Date for Immediate Action Technical Directives?
2
When resistors are made in values between 5 and how many watts?
200
Combustible liquids are any liquids that have a flash point at or above 100 F, but below what?
200 F
MIL-S- 8516 is an accelerated, synthetic, rubber sealing compound used for sealing low-voltage electrical connectors, wiring, and other electrical equipment against moisture and corrosion where temperatures do not exceed what?
200 F
What percent of a half-wave rectifier is the ripple frequency of a full-wave rectifier?
200%
How many hours prior to the a/c initial launch should fuel samples be taken?
24
How many hours prior to the a/c's initial launch should fuel samples be taken unless otherwise specified in a/c Maintenance Requirement Cards (MRCs)
24
The preflight inspection is valid for a period of how many hours, provided no flight and no maintenance other than servicing occurs during this period?
24
Within how many hours from the time the deficiency was discovered must Category 1 Product Quality Deficiency Reports (PQDRs) be submitted by routine precedence message via the Joint Deficiency Reporting System (JDRS)?
24
Within how many hours of discovery must a Category 1 Technical Publications Deficiency Report (TPDR) be initiated and sent by Priority message via the Joint Deficiency Reporting System (JDRS) when a safety related technical publication deficiency is detected which, if not corrected, could result in death or injury or damage to or loss of a/c, equipment or facilities?
24
Some SCRs can be switched how many times a second?
25,000
Over how many switches might typical aircraft have to control lights, electronics systems, and to indicate whether the landing gear is up or down?
250
Do not use plastic cable straps in high-temperature areas (above what)?
250 F
High-temperature, pressure-sensitive tape must be used to tie wire bundles in areas where the temperature may exceed what?
250F
Military standard and Navy pre-standard synchros are designed to operate on either 115 volts or how many volts?
26
What program covers all phases of miniature and micro-miniature repair?
2M
The IPB is divided into how many sections?
3
What percentage of the ocean is salt?
3.5-3.9%
FCFs are required when an a/c is returned to flight status that has not flown in how many or more days?
30
Fatalities from voltages as low as how many volts have been recorded?
30
Within how many days from the time the deficiency was discovered must Category 2 Product Quality Deficiency Reports (PQDR) be submitted via the Joint Deficiency Reporting System (JDRS) to the In-service Support Center (ISSC)/Lead Maintenance Technology Center (LMTC)?
5
What is the dielectric constant of glass?
5 to 10
Alloys are capable of obtaining a magnetic strength great enough to lift how many times their own weight?
500
Dry electrolytic capacitors vary in size from about 4 microfarads to several thousand microfarads and have a working voltage of approximately how many volts?
500
How many volts are Navy meggers usually rated at?
500
Conditional inspection documents should be maintained in the Aircraft Inspection File for how many months form the date of completion?
6
How many commonly used types of splices are there?
6
How many months at a minimum must completed FCF checklists be retained in a/c history files?
6
How many months at a minimum must completed FCFs checklist be retained in the aircraft maintenance file?
6
How many months at minimum must completed and processed MAF copy 1s be retained by Maintenance Control?
6
How many months prior to deployment should the Program Manager coordinate with the ship or station Hazardous Waste Minimization Center (HAZMINCEN) to establish Hazardous Material (HAZMAT) requirements and ensure product availability during all shifts?
6
How many volts do most aircraft synchros operate on?
60 or 400Hz
A revision normally takes place when more than what percent of the pages are affected by a single change or accumulated changes?
60%
The working voltage of a paper capacitor rarely exceeds how many volts?
600
The two most common alloys used in electronics are 60/40 and what?
63/37
How many watts are required to equal one horsepower?
746
A Category 2 Technical Publication Report (TPDR) is a non-safety related deficiency that results in ineffective maintenance that directly impacts mission readiness in an adverse manner, causing a maintenance delay of how many or more hours?
8
How many different types of asbestos wire does the NEC have designators for?
8
How many years is the recommended Target Completion Date for Routine Action Technical Directives?
8
Category A preservation is normally applied to SE/ Armament Weapons Support Equipment (AWSE)/ Weapons Handling Equipment (WHE) which is anticipated to be used within how many days?
90
Compass systems must be calibrated within how many days prior to a scheduled extended deployment of 60 or more days?
90
How many degrees will always be between the phases of a two-phase alternator?
90
Filiform corrosion occurs independently of light, metallurgical factors, and microorganisms present. It takes place when the relative humidity of the air is 78 to what percent and when the surface is slightly acidic?
90%
I-level maintenance activities repair more than what percent of the unserviceable parts turned in by the squadrons?
90%
What is the minimum score that all plane captain trainees must obtain on the plane captain exam?
90%
Common synchronous speeds for 60 hertz motors are 3600,1800,1200 and how many rpm, depending on the number of poles in the original design?
900
Small power transformers used in electrical equipment have an 80 to 90 percent efficiency range, while large, commercial power line transformers may have efficiencies exceeding what percent?
98
Which system provides the reporting custodian with a list of assets on hand and a ready reference of which a/c require Subsystem Capability Impact Reporting (SCIR)?
A/C Inventory and Readiness Reporting System (AIRRS)
What occurs when the base for what class of operation are biased so that collector current is zero (cutoff) for a portion of one alternation of the input signal?
AB
What are the majority of the motors used throughout the navy designed to operate on?
AC
Which type of electrical power is mostly used aboard Navy ships and a/c as well as in civilian applications?
AC
What is a method for reporting defects discovered in newly manufactured, modified, or reworked a/c that require immediate attention to ensure acceptable standards of quality in a/c maintenance and rework procedures?
ADR
For mission-essential publications, the central library submits the what?
ADRL
What is permanent part of the a/c logbook for equipments installed at the time of a/c transfer?
AESR
What perform aviation maintenance functions that are beyond the capability of the operating squadron or unit?
AIMDs
What provides specific instructions on reporting procedures for certain commands and conditions?
AMRR
What processes components turned in to the ASD/SSC (aviation support division/supply support center) to determine the capability of the intermediate maintenance activity (IMA) to check/test or repair the item?
AMSU
What unit coordinates the screening of received materials and parts to determine the status and repair responsibility and capability?
AMSU
Which part of a supply department is the point of contact for maintenance activities requiring direct support?
ASD/SSC
What helps maintenance personnel covert a description of an item that does not have a part or reference number to an NSN?
ASG
Emergency procedures shall not commence until authorized by the what?
Accident Investigation Board
Which software application module supports Aviation Maintenance Training Continuum System (AMTCS) in the schoolhouse and the fleet and is designed to document qualifications/certification progress with the Electronic/Certification Record?
Advanced Skills Management (ASM)
Per which program is D-level TD compliance accomplished?
Aircraft Modification Program
What are used as guides in establishing Individual Material Readiness Lists (IMRLs)?
Allowance Lists
What is a technical document prepared by the Navy for specific equipment/system support which lists the repair parts requirements for a ship having the exact equipment/component?
Allowance Parts List (APL)
Most field rheostats for generators use resistors of what?
Alloy wire
What clarifies,adds to, deletes from, makes minor changes to, or cancels an existing TD?
Amendment
Which type of device is used to measure current?
Ammeter
What is the amount of current necessary to cause full scale deflection ( maximum reading) of the ammeter?
Ammeter sensitivity
What is the capacity of a battery measured in?
Ampere-hours
What is defined as the magnetomotive force developed by one ampere of current flowing in a coil of one turn?
Ampere-turn
What is the magnitude of current measured in?
Amperes
What is the process called of increasing the strength of a signal?
Amplification
How often at a minimum must O,I, and D-level QA accompany Collateral Duty Inspectors (CDIs) during scheduled and unscheduled maintenance tasks to recheck their qualifications?
Annually
How often is an Operations and Maintenance, Navy (O&MN) appropriation enacted by Congress?
Annually
How often is command Hazardous Material Control and Management and Hazard Communication refresher training required for all personnel?
Annually
The QA division audits the CTPL at least how often?
Annually
What is corroding metal called?
Anode
Which main component of a circuit breaker confines, divides, and extinguishes the arc drawn between contacts each time the circuit breaker interrupts current?
Arc extinguisher
The maximum current that can be supplied by an alternator depends upon the maximum heating loss that can be sustained in the what?
Armature
What is always the rotor in a DC generator?
Armature
What is the smallest particle of an element that retains the characteristics of that element called?
Atom
Elements are classified numerically according to the complexity of their what?
Atoms
What serve as an orderly method of identifying, investigating and correcting deficiencies on a scheduled and unscheduled basis?
Audits
Which funds will be used to finance paints, wiping rags, towel service, cleaning agents and cutting compounds used in preventative maintenance and corrosion control of aircraft?
Aviation Fleet Maintenance (AFW)
Which database incorporates Hazardous Material (HAZMAT) requirements identified by aviation program offices, consolidates the information, and correlates the Hazardous Material (HAZMAT) requirements with existing Supply information?
Aviation Hazardous Materials List (AHML)
Which type of equipment allows a/c members to survive on land or water and interface with rescue forces?
Aviation Life Support Systems (ALSS)
Which concept uses technology infusion to standardize tracking, monitoring and management of all training into an integrated cohesive "cradle-to-grave" system?
Aviation Maintenance Training Continuum System (AMTCS)
What is a heavy copper strap or bar that is used to connect several circuits together?
Bus bar
Which Individual Component Repair List capability code identifies items for which a normal range of failures can be completely repaired by the I-level activity?
C1
What is a five-position code assigned to manufacturers and non-manufactures organizational entities and contractors of items procures by agencies of the Federal Government?
CAGE
What is an on-line system that continuously monitors the performance of electronic systems, predicts system performance trends, and isolates faults to removable assemblies?
CATS
The function of the what is to manage the LRCA held at the ASD/SSC?
CCS
what is the SE misuse/abuse form number?
CNAF 4790/108
What is the Monthly Flight Summary form number?
CNAF 4790/21A
What is the Scheduled Removal Component Card form number?
CNAF 4790/28A
What is the Equipment Operating Record form number?
CNAF 4790/31A
What is the SE Custody and Maintenance History Record form number?
CNAF 4790/51
What is the Supporting Equipment Transaction Report form number?
CNAF 4790/64
Who sponsors and directs the NAMP?
CNO
Which category of SE/Armament Weapons Support equipment (AWSE)/ Weapons Handling Equipment (WHE) wont be needed for extremely long periods of time as in over at least 180 days?
Category C
What is the building block of all batteries?
Cell
What transforms chemical energy into electrical energy?
Cell
What provides two equal voltages to the conventional full-wave rectifier?
Center-tapped transformer
When several changes are made at once in the same area of an illustration, what may be used to indicate the general area?
Change bar
Technical manuals are updated by the two methods; What are they?
Changes and revisions
Who is responsible for the training of naval personnel and for directing the various commands and offices in providing resources required to implement the training program?
Chief of Naval Operations (CNO)
Who maintains and controls a master bureau number log to ensure that once a Bureau Number (BUNO) is assigned it is not reassigned?
Chief of Naval Operations (CNO)
What is used as a protective plating?
Chromium
What is a circuit protection device thatt, like a fuse, will stop current in the circuit if there is a direct short, excessive current, or excessive heat?
Circuit breaker
The most common types of miniature and micro-miniature repair involve the removal and replacement of what?
Circuit components
Which class of Navy Training School teaches individual functional skill training by fleet or Aircraft Controlling Custodian(ACC)/Type Commander (TYCOM)?
Class F
Which class of Navy Training school is a segment course of a Navy Enlisted Classification (NEC) producing pipeline?
Class G
Four techniques are used to repair cracks in printed circuit conductors. What is the most reliable?
Cliched-staple
In a DC generator what replaces the slip rings of the AC generator?
Commutator
Which sets provide step by step procedures and instructions for engine disassembly to a controlled depth?
Complete Engine Repair Requirements Card (CERRC)
What contains the electronic baseline, actual inventory and historical information on a/c, engines, SE, Aviation Life Support Systems (ALSS), and associated assemblies?
Configuration Management (CM) Auto Log Set (ALS)
Which type of motors are induction motors called?
Constant-speed
What are power relays referred to as?
Contactors
Which type of low-resistance wire are the primary and secondary windings of a transformer usually made of?
Copper
Which type of alloys are generally used in avionic systems as contacts, springs, leads, connectors, printed circuit board (PCB) conductors and wires?
Copper and copper based
What is the power lost in the form of heat in the armature winding of a generator known as?
Copper loss
There are many known metal-semiconductor combinations that can be used for contact rectification. Which devices are by far the most popular?
Copper oxide and selenium
What is the ability of an insulator to withstand potential difference?
Dielectric strength
what is the minimum paygrade requires to be appointed as a QAR?
E-6
Which word is a very simple memory aide that is used to remember the relationship of voltage and current in an inductive circuit?
ELI
What is perhaps tile fastest method of zeroing synchros?
Electrical lock
Which brand of science is concerned with chemical reactions at surfaces in contact with electrolytes?
Electrochemistry
What are the conductors by which the current leaves or returns to the electrolyte?
Electrodes
What is a negatively charge subatomic particle called?
Electrolyte
Which principle does a synchro run on?
Electromagnetic Induction
What can cause degraded performance of mission critical systems that can result in damage to equipment and systems and even loss of an aircrew in extreme cases?
Electromagnetic Interference (EMI)
Nearly all practical generators use what instead of the permanent magnets used in an elementary generator?
Electromagnetic poles
Which type of items are all solid state electronic components and assemblies containing such components considered to be?
Electrostatic Discharge Sensitive (ESDS)
What are the invisible lines of force that surround any charged particles called?
Electrostatic lines of force
Which substance cannot be reduced to a simpler substance by chemical means?
Element
The component characteristics built into microcircuits are referred to as what rather than discrete components?
Elements
What is the thinnest insulating coating that can be applied to wires?
Enamel
What is the simplest type of circuit protection device?
Fuse
Which device is wired into the circuit that allows easy fuse replacement?
Fuseholder
What are installed in equipment circuits to prevent damage caused by increases in current?
Fuses
What needs to be increased on the servo amplifier to decrease the lag time and cause the load to move faster?
Gain
Which term is used to describe the amplification capabilities of the amplifier?
Gain
Which type of material was found to be the most sensitive for use in early radio receivers?
Galena
When aluminum pieces are attached with steel bolts or screws, what corrosion can occur around the fasteners?
Galvanic
Which type of instrument measures small amounts of current and is based on the electromagnetic principle?
Galvanometer
Which program provides the policy and procedures whereby maintenance activities can effectively accomplish their assigned engine maintenance responsibilities?
Gas Turbine Engine Maintenance Program
What series manuals cover standard aviation maintenance practices that apply to all a/c rather than to a particular a/c?
General engineering
What is a machine that converts mechanical energy into electrical energy by using the principle of magnetic induction?
Generator
Who proved by an experiment that a precise relationship exists between current, voltage, and resistance?
George Simon Ohm
What is the most frequently used material to manufacture wirewound resistors?
German Silver
What is used on printed circuits, semiconductors, leads and contacts and is traditionally considered the best coating for corrosion resistance and solder ability?
Gold
Most alloys are made up entirely of small crystalline regions called what?
Grains
What is the simplest type of rectifier circuit?
Half-wave rectifier
Carbon dioxide, HFC-125, or what other fire extinguishing agents will not leave residues?
Halon
Each of the resistors in a series circuit consumes power which is dissipated in the form of what?
Heat
What is the most frequently used magnetic shape in electrical and electronic equipment?
Horseshoe
Which instrument is used to measure a battery's specific gravity?
Hydrometer
The two ranges of solar radiation most damaging to materials are ultraviolet and which other rand that makes sunlight feel warm?
Infrared
What is the examination (including testing) of supplies and services, including raw material, documents, data, components, and assemblies?
Inspection
Which device integrates (combines) both active components (transistors, diodes, etc.) and passive components (resistors, capacitors, etc.) of a complete electronic circuit in a single chip (a tiny slice or wafer of semiconductor crystal or insulator)?
Integrated Circuit
What determines the maintenance level for electronic assemblies, modules, and boards for each equipment assigned to an activity?
Integrated Logistics Support Plan (ILSP)
What is a minute piece of semiconductor by virtue of the movement that can produce complete electronic circuit functions?
Integrated circuit
Which type of corrosion is an attack on the grain boundaries of the metal?
Intergranular
What is a technical directive issued by message or message format letter that dictates urgent dissemination?
Interim change
What is the prevention of unwanted interaction or leakage between components?
Isolation
What symbol is used for inductance?
L
Most requirements for components from organizational maintenance are for items carried in the what?
LRCA
What is necessary to determine the actual position of the synchros rotor?
Labeling
Which law states that "The induced EMF in any circuit is always in a direction to oppose the effect that produced it."?
Lenz's Law
What level of packaging is normally associated with small modules or submodules that are attached to circuit cards or mother boards?
Level 1
Which type of transformers are those in which the secondary voltage is in phase with the primary?
Likewound
One of the busiest, most important and dangerous divisions in a squadron is what division?
Line
Personnel from many different aviation ratings normally man what division?
Line
Which type of relationship exists between a superior and subordinate within both staff and line segments of the organization?
Line
An electrolytic capacitor has two primary disadvantages compared to a paper capacitor in that the electrolytic type is polarized and has what other disadvantage?
Low leakage resistance
Which type of environments is most military equipment intended for service in?
Low pressure (high altitude)
Because the controls differ from one a/c to another, you should always check the applicable what before pressure fueling an a/c?
MIM
Before you attempt any task on an a/c, consult the what for that particular model of a/c?
MIM
what should be consulted for the specific procedures to be used when stripping any a/c surface?
MIM
Who prepares and publishes the MMP for the AMOs signature?
MMCO
Which manuals contain description of the weapons systems from the viewpoint of upkeep and repair?
Maintenance
What is used to document all TD compliance?
Maintenance Action Form (MAF)
What is used to document all Technical Directive compliances?
Maintenance Action Form (MAF)
What will be used to document all maintenance actions if a TD is complied with at the O-level?
Maintenance Action Form (MAF)/ Work Order (WO)
what systematically evaluates non-conforming material in order to achieve material recovery and savings?
Material Review Board (MRB)
What officer coordinates the Tool Control Program and makes sure that tools are procured and issued according to the approved tool control plan (TCPL)?
Material control
What coordinates and controls the supply functions of the department?
Material control center
What can insulation resistance be measured with that wont damage the insulation?
Megger
Which type of cable was developed to meet the needs of a noncombustible, high heat-resistance, and water-resistance cable?
Mineral-insulated (MI)
Which program establishes policy, responsibilities, and requirements for the repair of miniature/micro-miniature electronic assemblies and the certification/re-certification and training of personnel?
Miniature/Micro-miniature Program (2M)
NAVAIRINST 13120.1 along with which other instruction provide policy for management of the Structural Life Limit Program?
NAVAIRINST 13130.1
Which publication contains information on schools and courses offered through Navy training commands?
NAVEDTRA 10500
OPNAVINST 3960.16 along with which other instruction prescribe policies for the Naval Aviation Metrology and Calibration (METCAL) program?
NAVIARINST 13640.1
In which ways are transistors classified?
NPN or PNP
What is the official statement of billets, personnel and training input and resource requirements to support the introduction and operational use of the a/c, systems, equipment and other developments, including non-hardware related developments?
Navy Training System Plans (NTSP)
What finances Aviation Depot Level Repairables (AVDLRs)?
Navy Working Capital Fund (NWCF)
What is the most important and most widely used characteristic of the tunnel diode?
Negative resistance region
How many years are logbooks/records of aircraft/equipment lost in combat or that have been involved in a mishap resulting in death, missing in action, personal injury or substantial damage to other than government property retained by the operating activity before being forwarded to the Washington National Records Center?
1
How many years at a minimum must Metrology and Calibration (METCAL) Address Indicator Group (AIG) messages be retained?
1
If a shunt resistor is selected with a resistance of .01 ohms the actual resistance of that shunt resistor will not vary from that value by more than what percent?
1
If your squadron or activity has a FAD 1 designation and the part is available on station, you should have the replacement part within what time frame?
1 hour
The verifying activity must identify the excess costs in the verification report to the cognizant APM/LM who will determine whether to restructure or cancel the TD if costs are projected to exceed what amount per squadron?
1,000
What is the specific gravity of pure water?
1.0
What is the dielectric constant of a vacuum?
1.0000
Wires to be soldered to connectors should be stripped so that when the wire is placed in the barrel; there will be a gap of approximately what size between the end of the barrel and the end of the insulation?
1/32 inch
How thin may laminations in a small generator armature be?
1/64 inch
Which type of circuit breakers are used for circuits that are essential for operations?
Nontrip-free
What form is designed to permit the monthly compilation of significant flight operational data throughout the service life of an a/c?
OPNAV 21A
What is the Naval Aircraft Flight Record form number?
OPNAV 3710/4
It is the responsibility of the a/c maintenance officer of her designated representative, usually the maintenance chief, to release the a/c by signing what form?
OPNAV 4790/141
What contains a complete record of all repair, reconditioning, scheduled depot-level maintenance (SDLM), conversion, modification, modernization, and a/c service period adjustment (ASPA) inspections performed on the a/c?
OPNAV 4790/23A
Operating activities record significant information on what form that affects the a/c for which no other space is provided in the logbook?
OPNAV 4790/25A
What is the Aeronautical Equipment Service Record (AESR) form number?
OPNAV 4790/29
What is the Planned Maintenance System (PMS) Feedback Report form number?
OPNAV 4790/7B
What form ensures that changes and revisions to technical publications have been issues and incorporated in a timely manner?
OPNAV 5070/12
Which Instruction provides information, policies, tasking's and procedures for Navy manpower management?
OPNAVINST 1000.16
Which instruction contains Navy Training System Plans (NTSP) development, approval and implementation procedures?
OPNAVINST 1500.76
Which instruction outlines the Aviation Maintenance Training (AMT) program and specifies Chief of Naval Operations policy in aviation maintenance training at both the O-level and I-level?
OPNAVINST 1540.2
Which instruction lists the Operating Service Life (OSL) which represents the total Operating Service Months (OPSERMOS) the a/c can by expected to serve before retirement?
OPNAVINST 3110.11
What contains the standards for organizing a ship/station/squadron's safety department and information on billet descriptions and responsibilities?
OPNAVINST 3120.32
Per which instruction are changes/ corrections to a/c NATOPS or tactical manuals reported?
OPNAVINST 3710.7
Pilots and crew members performing FCFs shall be qualified per the applicable aircraft NATOPS manual as well as which other instruction?
OPNAVINST 3710.7
The purpose of what instruction is to preserve human and material resources?
OPNAVINST 3750.6
What contains the instructions for maintenance personnel participation in command aviation safety programs?
OPNAVINST 3750.6
What lists all of the MDRs available from the DSF and their uses?
OPNAVINST 4790.2
What requires SE shops to establish a maintenance schedule for each item of equipment?
OPNAVINST 4790.2
Which law states that the voltage across a resistance is equal to the current through the resistance times the value of the resistance?
Ohm's
Which program establishes policy, responsibilities and requirements for monitoring a/c equipment condition in an effort to detect impending failures without equipment removal or extensive disassembly?
Oil Consumption Program
What is defined as the time it takes a capacitor to charge to 63.2% of the applied voltage or to discharge to 36.8% of its total charge?
One time constant
What is a circuit said to be when a break exists in a complete conducting pathway?
Open
Which type of control system is controlled directly, and only, by an input signal, without the benefit of feedback?
Open-loop
Electricity is a study that is frequently explained in terms of what?
Opposites
Which type of devices either produce light or use light in their operation?
Optoelectronic
What code is a three-character, alphanumeric code that identifies an activity within a major command?
Organization
What is the simplest type of diagram?
Pictorial
What is a flat insulating surface upon which printed wiring and miniaturized components are connected in a predetermined design, and attached to a common base?
Printed circuit board
Which automated system collects procedural deviations and deficiencies?
Process Correction Reporting System
What are used to report product deficiencies attributable to the supplier, contractor or rework facility through deficient material or manufacturing and substandard workmanship or rework?
Product Quality Deficiency Reports (PQDRs)
What is the central point of the entire maintenance effort?
Production control
What is defined as the process of removing air, water, solid particles and chlorinated solvents from hydraulic fluids?
Purification
What is planned and systematic pattern of actions necessary to provide confidence that the product will perform satisfactorily in service?
QA
What are provided for certain maintenance tasks that , if improperly performed, could cause equipment failure or jeopardize the safety of personnel?
QA MRCs
What are the maintenance personnel assigned to the QA division known as?
QARs
Which program provides standardization of in-service training at Navy aviation units using NAVEDTRA approved Personnel Qualification Standards (PQS)?
Qualified and Proficient Technician (QPT)
Which type of audits are independent reviews conducted to compare some aspect of performance with set quality standards for that performance?
Quality
Which program provides a systematic and efficient method for gathering, analyzing and maintaining information on the quality characteristics of products the source and nature of defects and their immediate impact on the current operation?
Quality Assurance
In simple terms, energy is required in definite units to move electrons from one shell to the next higher shell. What are these units called?
Quanta
Which process according to Dr. Zener's theory does electrical breakdown in solid dielectrics occur by?
Quantum-Mechanical tunneling
How often will Defense Finance and Accounting Service (DFAS) forward an Age Unfilled Order Listing (AUOL) to individual Operating Target (OPTAR) holders for each Operating Target (OPTAR) held?
Quartely
Supply reviews stock records for the PEB how often?
Quarterly
What is used to confirm a modification that has been completely incorporated by the contractor or in-house activity in all accepted equipment (before issuance of the TD)?
Record Purpose
Which TD category is assigned to Formal Change Technical Directive issued to document configuration changes that have been incorporated in all affected equipment by the changes designer/originator before the TD is issued?
Record Purpose
What is one of the most important uses of a diode?
Rectification
What is the conversion of an alternating current to a pulsating direct current?
Rectification
What converts the alternating current input signal to a pulsating direct current?
Rectifier
Which type of elements are resistors, lamps, and heating elements examples of?
Resistive
Which type of switch is a midcontact switch part of the schematic with the contacts arranged in a full or partial circle?
Rotary
What is the key principle to the operation of most AC motors?
Rotating magnetic fields
Which two mechanical parts must all generators have for relative motion to take place between the conductor and the magnetic field?
Rotor and Stator
Per which instruction is locally procured material found to be deficient by the buyer reported?
SECNAVINST 4855.3
what codes identify the source of spares and the levels of maintenance authorized to maintain, repair, overhaul,or dispose of all equipment?
SM&R
What type of maintenance is the responsibility of maintenance activities designated by the systems command (NAVSEA,NAVAIR,NAVELEX)?
SM&R Code D
What type of maintenance, performed at mobile shops, or shore-based repair facilities (SIMAS) provides direct support to user organizations?
SM&R code 1
ASO uses the what to identify items to aircraft models, engine models, certain commodities, and special projects or programs?
SMIC
What card is used to record maintenance history data of aeronautical components that are (through engineering analysis) determined to be life limited?
SRC
What contain abbreviated procedures for use in high-tempo operational areas?
SRCs
What are brush or spatula-applied compounds for SE corrosion prevention?
Sealants
Which record is designed to provide configuration and inspection information for a Seat Survival Kit (SSK) and its components?
Seat Survival Kit Record (OPNAV 4790/137)
Which record is designed to provide the current configuration and inspection record of a parachute assembly and its components?
Seat Survival Kit Record (OPNAV 4790/137)
Which type of motors are used for driving fans, electric drills, and other small appliances?
Series
Which type of motors can be operated by using either an AC or DC power source?
Series
Substrates used in monolithic ICs are of semiconductor material, usually what type?
Silicon
Which material used in communications was found to be the most stable?
Silicon
What is the difference between actual rotor speed and the synchronous speed in induction motors?
Slip
What neutralizes electrolyte spills from nickel-cadmium batteries?
Sodium phosphate
What is the core of a generator armature made from?
Soft iron
What is a control device that uses electromagnetism to convert electrical energy into mechanical motion?
Solenoid
What are the three stages that matter may be found in?
Solid, liquid, and gases
Which type of fuse can be used in any circuit where surge currents are not expected and a very fast opening of the fuse is not needed?
Standard
What is the existence of an electric force where current cannot flow referred to as?
Static electricity
The strength of the magnetic field produced by what determines the torque?
Stator
Which Control Transformer (CT) windings are considered to be the primary windings?
Stator
Which part of a synchro is a cylindrical of slotted laminations on which three Y connected coils are wound with their axes 120 degrees apart?
Stator
What is a transformer in which the voltage across the secondary is less than the voltage across the primary called?
Step-down
Which type of spray gun is designed for small jobs?
Suction-feed
Which form is used to request scheduling of end items of SE that are beyond the requesting Intermediate Maintenance Activity (IMA)/Fleet Readiness Center (FRC) capability?
Support Equipment Schedule request (CNAF 4790/80)
Which system used in conjunction with NALCOMIS is designed for the management of SE and provides automated methods of Periodic Maintenance scheduling for SE, TD compliance and supply requisition management?
Support Equipment Standardization System
What provides a record for the administrative review of the condition of accountable SE, the cause of condition, responsibility and a recommendation for disposition?
Survey
What is a paper-thin solder joint formed by a minute amount of solder remaining on the conductor lead surfaces?
Sweat joint
Which type of motors may be considered as polyphase motors, of constant speed, whose rotors are energized with DC voltage?
Syncronous
What cleaning method is the preferred method for cleaning naval a/c?
water-detergent
Which type of reports provide a simplified procedure to submit technical publications safety hazards and routine deficiencies to the Fleet Support Team (FST) with engineering responsibility for the equipment covered by the technical publications?
Technical Publications Deficiency Reports (TPDRs)
if you are to maintain complex weapons systems, you must be able to get the required information from what?
Technical manuals
What is often used in engine exhaust areas?
Titanium
What are the two types of rotors used in rotating-field alternators?
Turbine-driven and Salient-pole
What inspections are conducted between flights to ensure the integrity of the a/c for flight, verify proper servicing, and to detect degradation that may have occurred during the previous flight?
Turnaround
What indicates the amount by which the transformer increases or decreases the voltage applied to the primary?
Turns radio
Which type of diode blocks current until a specified voltage is applied?
Zener diode
Aviator's breathing oxygen (ABO) comes in both gaseous and what states?
liquid
Since corrosion products occupy more volume than the original metal, the paint surfaces may become blistered, flaked, chipped or appear in which way?
lumpy
What forms a strong anodic galvanic cell with every other metal and is ALWAYS the one attacked?
magnesium
When two or more generators are supplying a common load, they are said to be operating in what way?
parallel
Which type of circuit has more than one current path connected to a common voltage source?
parallel circuit
What is the application and removal of power in ints simplest form?
Circuit control
Data that covers a wide range of values are handled very effectively and still maintain a high degree of accuracy in wha type of synchro system?
Multispeed
What is a 9,10,11 character alphanumeric code used to separately identify each maintenance action?
JCN
What was designed so the oil condition of equipment can be diagnosed and monitored without removing or extensively disassembling equipment?
JOAP ( Joint Oil Analysis Program)
What division determines deficiencies, analyzes discrepancy trends, prescribes inspection procedures, and determines the quality of maintenance accomplished?
QA
What division is assigned the overall responsibility for the maintenance department safety?
QA
The ICRL-A is in microfiche and is revised how often?
Quarterly
To ensure positive control of inspection progress, individual crew members should not be issued Maintenance Requirement Cards (MRCs) at any one time with task totals in excess of how many hours?
2
NALCOMIS activities will store the current month and how many preceding months of completed MAFs on the host computer in the electronic historical data format?
2
The standard TMINS number is made up of how many distinct parts?
2
Work Center Supervisors must ensure that all hydraulic components/system repair, disassembly, inspection, reassembly and testing are conducted per NAVAIR 01-1A-17 and which other publication?
NAVAIR 01-1A-20
What outlines requirements for the AVGFE program?
NAVAIR 01-1A-35
What process involves depositing a very thin layer of silicon to form a uniformly doped crystalline region (epitaxial layer) on the substrate?
Epitaxial
Graphite or carbon fiber composites are materials which consist of reinforcing fibers in a matrix made of organic resin, usually what?
Epoxy
Which type of charge is a special extended normal charge that is given periodically to batteries as part of a maintenance routine?
Equalizing
Which form provides a method of monitoring specific maintenance data on designated components and equipment that do not qualify for a Scheduled Removal Component (SRC) card?
Equipment History Record (EHR) Card (CNAF 4790/113)
Which form is intended for use with all aeronautical equipment requiring the monthly compilation of significant operating data?
Equipment Operating Record (CNAF 4790/31A)
Which form is intended for use with all aeronautical equipment requiring the monthly compilation of significant operating data?
Equipment Operating Record (OPNAV 4790/159)
Which code is a structured, three-character code which relates a particular system or subsystem within a given model/type of equipment to a mission capability of that equipment?
Equipment Operational Capability (EOC)
Any complex circuit consisting of resistances can be redrawn (reduced) to as basic equivalent circuit containing the voltage source and a single resistor representing total resistance. This process is called reduction to a what?
Equivalent circuit
What is the total resistance of resistors in parallel also referred to as?
Equivalent resistance
Which type of corrosion is the increase in the rate of attack on a metal due to the action of a corrosive fluid against the metal surface?
Erosion
How often at a minimum must Navy and contracted Gas Turbine Engine Test System (GTETS)/Global Test Facilities(GTF) operators recertify?
Every 24 months
Direct shorts, excessive current, along with what else are the conditions that require circuit protection?
Excessive heat
What state is the atom said to be in once it has been elevated to an energy level that is higher than the lowest possible energy level?
Excited
What is a separation along the grain boundaries of metal and is caused by intergranular corrosion?
Exfoliation
What is an advanced form of intergranular corrosion where the surface grains of a metal are lifted up by the force of expanding corrosion products occurring at the grain boundaries?
Exfoliation
Which publication contains Aircraft Confined Space Program and Entry Authority (EA) certification requirements?
NAVAIR 01-1A-35
For specific information on solvents, you should check what?
NAVAIR 01-1A-509
Recovery and reclamation procedures are covered in detail in what?
NAVAIR 01-1A-509
When cleaning or performing corrosion control on aircraft and nonavionics aircraft components, you should use the materials listed in the what?
NAVAIR 01-1A-509
When in-depth information is needed about structural corrosion, refer to what?
NAVAIR 01-1A-509
Which series establishes the policy used to conduct the cleaning and corrosion prevention and control of avionics equipment?
NAVAIR 01-1A-509
Which publication contains the maximum ground test stand/engine test cell time a propeller may accumulate?
NAVAIR 03-20CBBK-1
Tires shall not be discarded of scrapped until they have been determined as non-serviceable per which reference?
NAVAIR 04-10-506
What contains the description, preparation for use and handling instructions for rocket catapults and rocket motors for Aviation Life Support systems (ALSS)?
NAVAIR 11-100-1.1-CD
Which series of manuals contains the scheduled maintenance requirements for a/c and man-mounted equipment?
NAVAIR 13-1-6
Connectors and receptacles that cannot by opened and separated for cleaning shall be cleaned and inspected in place under the direction of the what?
MO
After cleaning an a/c, relubricate it as specified by the what?
MRCs
What lists those items of Navy-managed repairable items issued on a one-for-one basis (you must turn in the unserviceable item before you can draw a replacement item from supply)?
MRIL
What is an unclassified training management system which, through diagnostic testing procedures, identifies training deficiencies at both the O/I- levels of maintenance?
MTIP
Aluminum, steel, titanium along with which other type of metal are the most commonly used in a/c construction?
Magnesium
What parts are particularly susceptible to corrosion attack while exposed to salt water, water immersion, or fire extinguishing agents?
Magnesium
What are the lightest structural metals used for a/c and missile airframes?
Magnesium alloys
What type of wire is used on the coils of meters, relays, small transformers, motor windings, and so forth?
Magnet wire
What is established around the winding when an alternating current flows through a primary winding?
Magnetic field
What is the space surrounding a magnet where magnetic forces act known as?
Magnetic field
What is the total number of magnetic lines of force leaving or entering the pole of magnet called?
Magnetic flux
Regardless of size, all electrical generators, whether DC or AC, depend upon what principle?
Magnetic induction
What is the effect called when a conductor is in a magnetic field and either the field or the conductor moves, and emf (voltage) is induced in the conductor?
Magnetic induction
What is generally defined as that property of a material which enables it to attract pieces of iron?
Magnetism
What is the most commonly used means for producing or using electricity?
Magnetism
What is described as "all actions taken to retain material in a serviceable condition or to restore it to serviceability"?
Maintenance
What manuals contain instructions for the effective use and support of weapons systems or equipment?
Maintenance
What directs the work performed on preserved aircraft AWSE/ WHE?
Maintenance Control
What is the nerve center of the maintenance department?
Maintenance Control
Where must any order to cannibalize an engine or engine component come from?
Maintenance Control
The aviation 3-M what provides a mechanized collection and processing of statistical data?
Maintenance Data System (MDS)
Which program establishes policy, responsibilities and requirements for implementing training within aviation maintenance activities?
Maintenance In-service Training Program (NAMPSOP)
What is defined as the actions necessary to retain in or restore material or equipment to a serviceable condition with an optimum expenditure of resources?
Maintenance Management
Who has overall responsibility for managing the maintenance effort?
Maintenance Material Control Officer
Who is responsible for ensuring all SE maintenance is optimally scheduled?
Maintenance Material Control Officer (MMCO)
What exercises the authority and takes the responsibility for the performance of the mission, tasks and work of the maintenance department?
Management
What is served when QA monitors the complete maintenance effort of the department and furnishes the factual feedback of discrepancies and deficiencies?
Management
Which form is used when a new item of SE is introduced into the Navy system and is originated by the manufacturer and is signed by the appropriate authorized government representative for inspection and acceptance?
Material Inspection and Receiving Report (DD 250)
What is defined as anything that occupies space and has weight?
Matter
Which two part is the universe, as we know it today, divided into?
Matter and energy
What is the maximum current called that is permitted to flow in the forward direction in the form of nonrecurring pulses?
Maximum surge current
What is an online Interactive Multimedia Instruction (IMI) repository for aviation Interactive Multimedia Instruction (IMI) courses containing over 1200 modules of training?
MediaTrax
Which device is widely used for measuring insulation resistance?
Megger
What is the common ground for the many electrical circuits in most electrical equipment?
Metal chassis
What is the greatest threat to the soundness of metals and to the structural integrity of an aircraft?
Metal corrosion
Metal corrosion is the decay of metals as the combine with oxygen to form what?
Metallic oxides
Which device when used properly is the only sure way of knowing whether or not a fuse is open?
Meter
what is a cleaner for bare-metal surfaces and areas where MIL-S-8802 sealant is to be removed?
Methyl Ethyl Ketone (MEK)
What is used where a high flash point is required?
Methyl chloroform
What is the Management Information System (MIS) for the Metrology and Calibration (METCAL) program?
Metrology Automated System for Uniform Recall and Reporting (MEASURE)
Which Naval Aviation program establishes policy, responsibilities and requirements to ensure SE/Test, Measurement, and Diagnostic Equipment (TMDE) performance is compared to reference Calibration Standards (CALSTDs) of known and sufficiently greater accuracy?
Metrology and Calibration (METCAL)
What is an excellent dielectric that can withstand a higher voltage a paper dielectric of the same thickness?
Mica
Which type of attack includes the action of bacteria, fungi and molds?
Microbial
What is defined as that area of technology associated with and applied to the realization of electronic systems made of extremely small electronic parts or elements?
Microelectronics
Text for what medium emphasizes coordination between text and illustrations, line art instead of photographic art for illustrations legibility and a comprehensive index for many points of entry?
Microfilm
What is the accurate snap-acting switch commonly called?
Microswitch
What manuals are prepared for specific requirements to support defined maintenance concepts and predetermined maintenance level coverage?
Military specification
Which two broad categories can the synchros used in the Navy be grouped into?
Military standard and Pre-standard Navy
What is the diameter of conductors usually expressed in?
Mils
What type of engine design allows intermediate level facilities to readily remove and replace interchangeable with ready-for-issue (RFI) spares?
Modular
Which type of engine design allows I-level activities to readily remove and replace interchangeable modules with Ready for Issue (RFI) spares?
Modular
What is a chemical combination of two or more atoms called?
Molecule
What is the smallest part of a compound called which has all the characteristics of the compound?
Molecule
Which Quality Assurance term is defined as an ongoing review of details, plans,policies, procedures, products, directives and records?
Monitor
In which type of integrated circuits do all elements do all elements (resistors, transistors,etc.) associated with the circuit fabricated inseparably within a continuous piece of material (called the SUBSTRATE) which is usally silicon?
Monolithic
Approach, the Naval Aviation Safety Review, is published how often by the U.S. Naval Aviation Safety Center and gives the most accurate information currently available on the subject of aviation accident prevention?
Monthly
How often are executive-level forums held by the Director of Quality with the D-level Fleet Readiness Center Commanding Officer to review program performance and process monitoring results of all areas?
Monthly
How often at a minimum must Intermediate Maintenance Activities (IMAs) conduct Individual Component Repair List (ICRL) capability and Beyond Capability of Maintenance (BCM) reviews?
Monthly
How often at a minimum must a working-level forum be held by the area Quality Assurance specialist with the Artisan Inspectors to evaluate program performance, monitoring results and improvement opportunities?
Monthly
How often must the Work Center Supervisor (WCS) review the work center Pre-Expended Bin (PEB) requirements and compare them against actual Pre-Expended Bin (PEB) stocking levels?
Monthly
Which form is designed to permit the monthly compilation of significant flight operational data throughout the service life of an a/c?
Monthly Flight summary (CNAF 4790/21A)
What provides scheduled control of the predictable maintenance workload?
Monthly Maintenance Plan (MMP)
The QA responsibilities assigned to the QA division include using info from the maintenance data reports (MDRs) and what reports to develop discrepancy trends, and to identify failure or other maintenance problems?
NALCOMIS
Which system provides online validation of MAF data and invalid MAF correction procedures?
NALCOMIS
What representative manages the AMMRL program within his/her geographical areas?
NAMO
When issued, what will eliminated the need for maintenance instructions at command level?
NAMSOP
All aeronautical publications, changes, technical directives, and forms issued by NAVIARSYSCOM are cataloged in the what?
NAPI
What flight manual contains the complete operating instructions for a specific a/c and its operational equipment?
NATOPS
What is responsible for research, design, development, testing, acquisition and logistic support of all naval aviation procurement relating to a/c missile targets and associated material and equipment?
NAVAIR
Which manual describes the NAVAIR Technical Manual Program and provides guidance on maintaining technical manuals?
NAVAIR 00-25-100
Which publication contains detailed procedures for establishing and operating Central Technical Publications Libraries (CTPLs)?
NAVAIR 00-25-100
AR-41 along with which other publication contain the requirements for developing and preparing TDs?
NAVAIR 00-25-300
Which publication will be executed to direct, control, accomplish and record modification and changes to Naval aircraft, associated equipment and systems procured by or for COMNAVAIRSYSCOM?
NAVAIR 00-25-300
Aircrew, prior to commencing helicopter in-flight refueling operations, must be trained to perform inspection of fuel samples per which publications?
NAVAIR 00-80T-109
Which publication provides basic information for the safe and professional use of SE in the hazardous work environment of naval aviation?
NAVAIR 00-80T-96
A standardized paint system for O and I level painting and paint touch-up is presented in what?
NAVAIR 01-!A-509
Basic structural repair data, common to all a/c, is related in what general engineering series manual?
NAVAIR 01-1A-1
What requires that any remaining fluid left in the hydraulic fluid container, after servicing a fill stand/ servicing unit, be discarded, and that the empty fluid container be destroyed immediately and not used to store or handle other fluids?
NAVAIR 01-1A-17
Which manual is a single source of information relating to COMNAVAIRSYSCOM policies for naval aircraft and related hose and tube assemblies?
NAVAIR 01-1A-20
A complete NAPI should be maintained by what division in its technical library?
QA
Maintenance administration and what other divisions link the progress of the production divisions?
QA
The idea of what is to prevent defects form occurring from the start of a maintenance operation to its finish?
QA
What division has overall management responsibility for the technical library?
QA
Who perform, administer, monitor and review processes and practices to ensure the quality of maintenance performed for the Department of Defense?
QA specialists
What are required in an intermediate maintenance activity/aircraft intermediate maintenance department (IMA/AIMD), but are optional at organizational-level maintenance?
QA stamps
Who are at the center of the QA division?
QARs
What report provides maintenance activities with a method for reporting deficiencies in new or newly reworked material?
QDR
Which program establishes policy, responsibilities and requirements for evaluating performance throughout the Maintenance Department?
Quality Assurance Audit Program
How often at a minimum are reporting custodians required to report a/c hours in life?
Quarterly
How often must Individual Component Repair List (ICRL) reviews be completed by the due date assigned by the Individual Component Repair List (ICRL) Program Manager?
Quarterly
How often will Defense Finance and Accounting Service (DFAS) forward an unmatched expenditure listing to individual Operating Target (OPTAR) holders?
Quarterly
QA conducts work center audits how often to evaluate the overall quality performance of each work center?
Quarterly
The central library audits dispersed libraries at least how often to ensure that their publications are current and in good material condition?
Quarterly
What is the process by which TDs are removed from active files after requirements have been incorporated?
Recission
Which device changes alternating current to a form of direct current?
Rectifier
What is an arbitrarily chosen point to which all other points in the circuit are compared?
Reference point
What are electrically operated control switches?
Relays
Which term is generally defined as the probability that an item will successfully perform its designated function for a specified period of time under specified operational conditions?
Reliability
Which maintenance concept is naval aviation dedicated to applying to in-service and future naval aircraft, engines, aircrew systems, weapon systems, aircraft launch and recovery equipment, and SE?
Reliability Centered Maintenance (RCM)
There are two forms that are displayed on the VIDS board. They show the status of a weapon system or a what?
Repairable component
Self-excitation is possible only if the field pole pieces have retained a slight amount of permanent magnetism, called what?
Residual magnetism
What is the amount of magnetism which remains in a temporary magnet referred to as?
Residual magnetism
What is current inversely proportional to?
Resistance
What is the opposition to current flow known as?
Resistance
What is the reciprocal of conductivity?
Resistivity
What are the most common components used in electronics?
Resistors
Which components are manufactured to possess specific values of resistance?
Resistors
What block and the SE license must identify the type, model, and series of a/c on which the equipment can be used?
Restriction
What is a materials ability to retain residual magnetism called?
Retentivity
What is a completely new edition of the existing directive?
Revision
Which type of maintenance is the restorative or additive work performed on a/c, a/c equipment and a/c SE?
Rework
Bar, horseshoe, along with what else are the three general classifications of magnets?
Ring
What TDs are used to authorize ,accomplish, or modify only?
Routine action
what is normally used for low or medium range voltage?
Rubber insulation
What serves as a point of contact between work centers and the data services facility and is responsible for all aspects of the maintenance data system including Naval Aviation Logistics Command Management Information System (NALCOMIS) reports and inquiries?
SA/A
Planned Maintenance System (PMS) publications consist of maintenance requirements cards (MRCs), periodic maintenance information cards (PMICs), checklists, and what else?
SCCs
What aid the planning and accomplishing of scheduled and unscheduled maintenance tasks during inspections?
SCCs
What provides factual information, generated at the lowest level of maintenance, as to a/c or equipment inventory and actual subsystem performance?
SCIR
What is the formula for calculating Subsystem Capability Impact Reporting (SCIR) Gripe Life?
SCIR GRIPE LIFE= AWP+ EMT+AWM
What functions as a switch that can turn on or off small or large amounts of power?
SCR
What is the equipment required on the ground to make a system, subsystem, or end item equipment operational in its intended environment?
SE
What personnel return to the shore-based AIMD upon completion of the ships deployment?
SEAOPDET
What are major aviation commands that exercise administrative control of AMMRL program SE end items for allowance and inventory control?
SECAs
Which reference contains procedures for transferring records to the Washington National Records Center?
SECNAV M-5210.1
Which instruction provides the overarching policy guidance for the Product Quality Deficiency Report (PQDR) program?
SECNAVINST 4855.3
What provides the support equipment controlling authority (SECA) with on-line visibility of source, allowance, inventory, and rework data to aid in inventory control?
SERMIS
What position in the SM&R code identifies either the restrictions on acquiring the item or the level of maintenance required to manufacture or assemble the item?
Second
Which type of cell is one in which the electrodes and the electrolyte are altered by the chemical action that takes place when the cell delivers current?
Secondary
How often is egress/explosive system training and checkout required for all maintenance personnel?
Semi-Annually
How often must he Work Center Tool Representative conduct toll container inventories with the Tool Control Program coordinator?
Semi-Annually
How often at a minimum must QA conduct work center audits to evaluate the overall quality of each work center's performance?
Semi-annually
How often will the Chief of Naval Operations (CNO) approve a list of a/c strikes?
Semi-annually
What is a solid that contains a forbidden gap?
Semiconductor
What is the process by which interim changes are removed from active files after a formal TD has been issued?
Supersedure
What can be defined as the act of guiding, directing, overseeing, evaluating, and controlling the activities of other in the accomplishment of an objective?
Supervision
Who is responsible for and directs the work of others?
Supervisor
Which form is used to report FMS items under the International Logistics Program, after conveyance of title, under SECNAVINST 4355.18?
Supply Discrepancy Report (SF 364)
Which procedures is required when Navy property and Defense Logistics Agency (DLA) material in Navy custody is lost, damaged or destroyed?
Survey
What permits control of the electrical device and interrupts the current delivered to the load?
Switch
Gain, leakage, breakdown, along with what else are the four basic tests required for transistors in practical troubleshooting?
Switching time
Which name is given to a variety of rotary, electromechanical, position-sensing devices?
Synchro
What are used primarily for quickly locating a defective synchro?
Synchro testers
Which type of transmitter converts the angular position of its rotor (mechanical input) into an electrical output signal?
Synchro torque
Which type of motor cannot be started from a standstill by applying three-phase AC power to the stator?
Synchronous
What reduces the potential for tool FOD-related mishaps and keeps down the cost of tool replacement?
TCP
What contains information that includes material requirements, tool inventories, and detailed instructions for operation of the TCP for a specific type/model of a/c?
TCPL
What is an important element designed to maintain equipment in a configuration that provides the optimum conditions of safety, operational and material readiness?
TD system
What is a four-character, alphabetic code that identifies the end item of equipment on which work is performed such as a/c,engine, or SE?
TEC
What includes incidents generally categorized in other areas, such as a foreign object damaged engine, which sheds parts, or a helo rotor blade pocket failure?
TFOA
What is used to record maintenance history for repairable components not designated as life limited?
Tracked Component Record (TCR)
Which online tool supports life cycle management related to the upkeep and revision of training applications, software and hardware for Interactive Multimedia Instruction (IMI) items?
Training Tool Change Management System (TTCMS)
What code is a two-character, numeric code that shows the type of date being reported?
Transaction
What steps up or steps down the input line voltage and isolates the power supply from the power line?
Transformer
Which device transfers electrical energy from one circuit to another by electromagnetic induction?
Transformer
Which type of device can step up or down alternating voltages amplitudes?
Transformer
What are semiconductor devices called that have-three or more elements?
Transistors
The most effective mechanical methods of removing corrosion with the least removal of the metal are vapor blasting, soft-grit blasting, and what else?
dry vacuum blasting
Which type of defects could result in failure or materially reduce usability of the unit for its intended purpose?
major
Which type of deficiency is a defect that is likely to result in the failure or reduced material utility of a unit or product?
major
What is anything that occupies space and has weight known as?
matter
Which type of defects are not likely to materially reduce usability of the unit of product for its intended purpose or depart from established standards?
minor
What is frequency always measured and expressed in?
Hertz
Which unit indicates one cycle per second?
Hertz (Hz)
Which axis on a graph is known as the X-AXIS?
Horizontal
What is defined as an operational evolution where an a/c is refueled while the engine is operating?
Hot refueling
What should be used to remove salt residue and contaminants from internal avionics and electrical equipment?
Isopropyl alcohol
When a solder joint is completed, solvent must be used to remove all flux residue. The two most highly recommended solvents, in the order of their effectiveness, are 99.5% pure ethyl alcohol and 99.5% pure what?
Isopropyl alcohol
CAT2 QDRs are submitted on an SF 368 to the CFA within how many working days of the discovered deficiency?
5
How many main components do circuit breakers have?
5
Lead melts at a temperature of 621 degrees Fahrenheit, and tin melts at how many degrees F?
450
The AC power on most ships is distributed by a three-phase, three-wire, how many-volt system?
450
What is the three-character, numeric code that is used to identify work centers within an organization?
WCC
Room temperatures vulcanizing (RTV), silicone rubber sealant is used for sealing small electrical connectors and electrical components that are located in area where the temperatures are between 200F and what?
450F
What oil is used to lubricate and protect piano-wire hinges and other critical surfaces?
VV-L-800
Which year was the first transistor discovered?
1948
Which year did Leo Esaki discover that if a semiconductor junction diode is heavily doped with impurities then it will have a region of negative resistance?
1958
What is a typical light-to-dark resistance ratio for a photocell?
1:1000
Which symbol is used to represent impedance?
Z
What is a PN junction that is designed to operate in the reverse-bias breakdown region?
Zener diode
What is the overall charge of N material?
Zero
In a natural, or neutral state, each atom in a body of matter will have the proper number of electrons in orbit around it. Consequently, the whole body of matter composed of the neutral atoms will also be electrically neutral. What is the atom said to have while in this state?
Zero charge
Which type of inspection is a general inspection of a specific area of an a/c?
Zonal
What is the resistance of a conductor inversely proportional?
Cross-sectional area
The line division is a division within what department?
maintenance
A WP consisting of how many pages or less will always be revised?
10
How many times more mass do protons have than electrons?
1,837
Which type of device generators a signal in response to an acceleration?
Accelerometer
Do not use nylon cable straps over wire bundles containing what?
Coaxial cable
What is the resistance of a conductor directly proportional to?
Length
What is energy the product of?
Power and Time
The maximum power output for transistor generally ranges from 30 milliwatts to slightly over how many watts?
100
The recommended lighting for a work surface is how many footcandles from a direct lighting source?
100
Up to how many pounds of sea salt per cubic mile of air can normal sea winds carry?
100
What is used as a conductor when weight is a major factor because it is considerably lighter than copper?
Aluminum
What are the most widely used materials for a/c construction?
Aluminum and aluminum alloys
What is the most common method of measuring wire size in the Navy?
American Wire Gauge (AWG)
How many volts does the manganese dioxide-alkaline-zinc cell have?
1.5
Electrolytic capacitors are available in sizes up to how many microfarads or greater?
10,000
How many or more times without failure are most switches designed to operate if the voltage and current ratings are not exceeded?
10,000
in arid regions such as deserts, small sand particles are often blown as high as how many feet b the siroccos (hot, dust laden winds)?
10,000 feet
Which type of diagram shows the major components of a system and the interconnections of those components?
Block
Copper, Hysteresis, along with what else are the main power losses in an inductor?
Eddy-current
Which alternating voltage or current value is the value of voltage or current at one particular instant?
Instantaneous
Which type of material must be between the plates of a capacitor?
Insulator
What are lines of flux generated by one winding which do not link with other winding called?
Leakage Flux
smoking or naked lights are not permitted within how many feet of an a/c that is being refueled of the fuel storage tanks?
100
Flammable liquids are any liquids that have a flash point below what?
100 F
The tropical environment is sustained by long periods of heavy rainfall, during which as many as how many inches of rain may fall?
100 inches
How many groups of technical manuals exist for the control and performance of engine repair?
2
How many maximum or AC peak values during each complete cycle of AC are there?
2
How many qualified person at a minimum are required to perform all Liquid Oxygen (LOX)/gaseous oxygen operations?
2
How many resistance at a minimum must parallel circuits contain which are not connected in series?
2
How many years must completed SE misuse/abuse report forms be retained for?
2
To remove corrosion from clad surfaces, the corroded areas should be hand polished with what metal polish?
MIL-P-6888
What year did G.R. Kirchhoff extend the use of Ohm's law by developing a simple concept concerning the voltages contained in a series circuit loop?
1847
Pre-standard synchros operate in a range of -13 degrees F to what temp?
185 degrees F
How long are QA audit records maintained for?
1 year
Which year did Michael Faraday discover that silver sulfide, a semiconductor, has a negative temperature coefficient?
1883
If an item costs more than maximum permitted (what amount), the commanding officer must approve the item for PEB stockage?
$150
Practical uses of electricity were not recognized until late into what century?
18th
Standard synchros are designed to withstand surrounding temperatures ranging from -67 degrees to what at the terminal board?
+257 degrees F
What year was the first compact, workable circuit breaker developed?
1923
What year was the first circuit breaker placed on the market?
1928
A thick film is a film of material with a thickness that is at least 10 times greater than the mean free path of an electron in that material, or approximately what amount?
0.001 centimeter
For the AC voltmeter method of zeroing a synchro to be as accurate as possible, an electronic or precision voltmeter having 0 to 250 volt and a 0 to 5 volt ranges should be used. On the low scale this meter should also be able to measure voltages as low as what?
0.1 volt
In order for a silicon NPN transistor to conduct, the base must be between how many volts more positive than the emitter?
0.6 to 0.7 volts
The average value of a sine wave of voltage or current is the average of all the instantaneous values during one alternation. The average value is equal to what amount of the peak value?
0.636
How many times the peak value is the effective value of a sine wave?
0.707
Aircraft batteries are rated according to a how many-hour rate of discharge?
1
An inductor has an inductance of 1 henry if an emf of 1 volt is induced in the inductor when the current through the inductor is changing at the rate of how many amperes per second?
1
CAT 1 QDRs are reported by routine precedence message within how many working days after the discovery of the deficiency unless combined with an HMR?
1
Which year was the zener effect first proposed by Dr. Carl Zener?
1934
Most meter movements in use today have sensitives of from 5 microamperes to what?
1 milliampere
How many months can a high quality capacitor hold its charge?
1+
Over how many known elements are there?
100
Tests have shown that body resistance under unfavorable conditions may be as low as 300 ohms, and possibly as low as how many ohms (from temple to temple) if the skin is broken?
100
The input resistance of the SCR is relatively low (approximately how many ohms) and requires a current for triggering?
100
For a resistor whose the fifth band is color coded brown, the resistor's chance of failure will not exceed 1% for every how many hours of operation?
1,000
The range of a megger may extend to more than how many megohms?
1,000
Low-speed pre-standard syncrhos must be capable of continuous operation for 1,500 hours at what RPM without a load?
1,200
To meet military specifications, all standard synchros must be capable of continuous operations for 1,000 hours at how many revolutions per minute (rpm) without a load?
1,200
Approximately how many times is the mass of the proton to that of an electron?
1,827
How many hours per day in flight operations do most front-line combat a/c average?
1-2
Approximately what percent of the load current should the current in a voltage divider resistor equal?
10
Commands functioning with minimal publications (how many or less) and no automatic data processing (ADP) support may use the older Naval Warfare Publication Library (NWPL) system for publication management rather than the Technical Publications Library Program?
10
Copper-oxide rectifiers are generally used in small-current applications such as AC meter movements or for delivering direct current to circuits requiring not more than how many amperes?
10
How many or more like items maintained in large quantities can be grouped into homogeneous lots for Planned Maintenance System (PMS) inspections?
10
How many workdays after the Material Review Board (MRB) form has been prepared must Material Review Board (MRB) action commence?
10
LED operating voltage is small, about 1.6 volts forward bias and generally about how many milliamperes?
10
M/C provides pilots/aircrews with a record of a/c discrepancies and corrective actions for the last how many flights of the a/c by maintaining the ADB?
10
Mech is published bimonthly by the U.S Naval Safety Center. It is distributed to naval aeronautic organizations on the basis of one copy per how many persons?
10
Overheating small or delicate wiring can easily occur when a soldering gun is used. For most jobs, even the low position of the trigger overheats the gun after how many seconds?
10
The ADB is designed to provide maintenance and a/c personnel with an accurate, comprehensive and chronological record of flights and maintenance performed on a specific a/c by Bureau Number (BUNO) for at least the last how many flights?
10
O-level activities are not authorized to requisition or stock Aviation Life Support Systems (ALSS) assemblies or parts beyond those required to outfit what percentage of their assigned a/c and aircrew?
100%
Most fungus growth is inhibited by temperatures about which temperature?
104 F
The resistance of the human body cannot be relied upon to prevent a fatal shock from a voltage as low as how many volts or even less?
115
The resistance of the human body cannot be relied upon to prevent a fatal shock from how many volts or less?
115
Shore-based navy squadrons who have I-level billets authorized should assign personnel to the supporting IMA for a minimum of how many months?
12
How many months is the recommended Target Completion date for Bulletins?
12-18
Flight deck control should be notified not to move an a/c or test cell to the hangar bay if it receives, or is suspected of receiving, any fuel other than JP-5 until the flashpoint has been certified to be above what temperature?
120 degrees F
Nonmetallic materials suffer the most damage from the hot desert climates, where air temperatures during the day may reach what?
124 F
115 volts AC can vary from about 105 volts AC to how many volts AC?
125
If you wish to protect the circuit fro overloads (excessive current), select a fuse rated at what percent of the normal circuit current?
125%
The NSN is a how many-digit number that identifies an item of material in the supply system?
13
Aircraft must be washed and cleaned at least every how many days, unless otherwise directed by NAVAIR?
14
Anytime an a/c is out of service or will remain idle for how many or more days, maintenance will put the a/c in level 1 preservation?
14
Above what decibel (dB) sound intensity, any exposure without ear protection can cause damage?
140
Pressure-sensitive Adhesive Tape should perform satisfactory over a temperature range of -65 F to what?
140 F
What is the minimum amount of minutes that the eyes must be flushed if electrolytes are spilled or splashed on the skin or eyes?
15
About how many degrees from its geographical axis is the magnetic axis of the earth located?
15 degrees
Varnished cambric and paper insulation for cables are the two types of insulating materials most widely used at voltages above how many volts?
15,000
If you wish to protect against direct shorts only, select a fuse rated at what percent of the normal circuit current?
150%
The second part of the TMINS is called the suffix. It is an added field of up to how many characters ( including the slash)?
17
Do not use zinc chromate primer on exterior a/c surfaces, including wheel wells and wing butts, and in areas that are exposed to temperatures exceeding what?
175 F
2M instructors must ensure that 2M training site certifications are requested and performed every how many months?
18
A directive classified ROUTINE ACTION must be accomplished within how many months of the date of issue?
18
A formal Engineering Change Proposal (ECP) shall be obtained within how many days when an Interim Change Technical Directive is issued to permit a thorough review of all engineering and logistic elements of the change?
180
Category B preservation is normally applied to SE/ Armament Weapons Support Equipment (AWSE)/ Weapons Handling Equipment (WHE) which is anticipated to be used within how many days?
180
What year did Hans Christian Oersted discover a definite relationship between magnetism and electricity?
1819
The transistor was developed by Bell Laboratories in what year?
1948
Hydraulic fluid MIL-H-46170 is also used as a testing medium in stationary test stands within a temperature range of -40F to what?
275F
Any a/c with Awaiting Maintenance (AWM) corrosion discrepancies that are within maintenance capability shall be restricted from flight if the discrepancies are not corrected with how many calendar days from the date of discovery?
28
The turns ratios in synchros may vary widely, depending upon design and application, but there is commonly a step down of what between the rotor and a single coil?
2.2:1
About how many times the length of the longest conductor in the group is the amount of flat tape or cord required to single lace a group of conductors?
2.5
What is the dielectric constant of rubber?
2.5 to 35
Most batteries are rated according to a how many-hour rate of discharge?
20
Generally, air-core transformers are used when the voltage source has a high frequency (above what)?
20 kHz
What is the maximum shelf life of the Lithium-Organic Cell and the Lithium-Inorganic Cells?
20 years
Radio-frequency (RF) transformers are used to couple circuits to which frequencies above what are applied?
20,000 Hz
How many degrees celsius is Fluorinated Ethylene Propylene (FEP) rated at?
200
No prime generators, as defined in NAVAIR 01-1A-23, shall be closer than how many inches to an Electrostatic Discharge (ESD) protected work area?
24"
When solvents contain more than what percent by volume of chlorinated materials, they must be kept in specially marked containers?
24%
To break the gloss of existing finishes and to feather (smooth out) the edges for overlap, you should scuff sand by using what grit aluminum oxide cloth?
240 or 320
All Ready For Issue (RFI) tires being transported off station shall not exceed how many PSIG of pressure?
25
After the signatures have been obtained, the SE license issued is valid for how many years for equipment and a/c regardless of the activity to which the license is assigned?
3
Any fuel system that has been drained of fuel for more than how many days or is expected to remain inactive for more than 60 days is to be preserved with MIL-L- 6081 Grade 1010, and be dehumidified?
3
Effective maintenance and repair of microelectronic devices require of how many levels of maintenance?
3
How many basic configurations may a transistor be connected in?
3
How many connections does the potentiometer always have?
3
How many different basic type are mercury cells presently manufactured in?
3
How many major categories can accountable SE be classified into?
3
How many months prior to detachment should the Program Manager coordinate with the station Hazardous Waste Minimization Center (HAZMINCEN) to establish Hazardous Material (HAZMAT) requirements and ensure product availability and compliance with local storage and handling requirements?
3
How many sizes are Visual Information Display System boards currently available in?
3
How many types of aluminum surfaces insofar as corrosion removal is concerned?
3
How many ways are there to combine cells to form a battery?
3
How many years are SE operator license valid for type equipment and a/c regardless of activity assigned?
3
How many years is the recommended Target Completion Date for Urgent Action Technical Directives?
3
QA stamps may not be reassigned within a period of how many months?
3
Records show that seen out of ten victims of electric shock were reviewed when artificial respiration was started in less than how many minutes?
3
Refueling crews consists of a minimum of how many people?
3
The preoiler (PON-6) is a portable, hand-carried, hand pump with a how many-gallon capacity?
3
The usability of a manual has how many primary elements?
3
What is the maximum number of valence electrons that conductors have?
3
Maintenance personnel remove corrosion products by rubbing lightly with stainless steel wool, abrasive impregnated webbing, or what-grit or finer aluminum oxide abrasive paper?
320
MOS field-effect transistor (MOSFET) can be damaged be a static voltage potential of as little as how many volts?
35
If the a/c is carrier based, the tire pressure is maintained at what psi, regardless of the gross weight?
350
Once a QA stamp is turned in by an inspector, either due to transfer or loss of qualifications, it may not be reassigned within a period of how long?
3 months
Which type of filtration will all servicing SE be equipped with?
3-micron (absolute)
D-Level man-hour allocations are provided to each COMNAVAIRSYSCOM customer for calibration support of Individual Material Readiness List (IMRL) assets and Field Calibration Activity (FCA) standards. An analysis of these qualifying customers D-level calibration requirements is made approximately how many days prior to the beginning of each fiscal year quarter?
30
FOD inspections must be part of the QA inspection process of all a/c, a/c equipment and SE after extended down time in excess of how many days?
30
How many calendar days does Naval Air Technical data and Engineering Center (NATEC) have to respond directly to activities that sent an assistance request letter because they were unable to locate applicable COMNAVAIRSYSCOM approved technical publications or have determined that the publication does not exist?
30
How many days prior to deployment should Metrology and Calibration (METCAL) requirements be reviewed with the Type Wing and supporting Field Calibration Activity (FCA) Program Manager?
30
SRS limits the quantity of any item in the PEB to a how many-day supply?
30
The Hazardous Material Control and Management (HMC&M) Supervisor must ensure that all work center supervisors and their designated Hazardous Material Control and Management (HMC&M) Petty Officer/Non-Commissioned Officer (NCO)/shop coordinators have completed formal or local Hazardous Material (HAZMAT) storage and handling training within how many days of assignment?
30
The operating rang of a plug-type fuse is usually up to 150 volts and from 0.5 ampere to how many amperes?
30
Within how many days of reporting to the maintenance department should personnel receive indoctrination training per Naval Aviation Maintenance Program (NAMP) training requirements?
30
After engine operation, no work should be done to the exhaust section for how long?
30 minutees
Ceramic capacitors usually range in value from 1 picofarad to 0.01 microfarad and may be used with voltages as high as how any volts?
30,000
The DC output of the voltage multiplier ranges from 1000 to how many volts?
30,000
Do not hold a test probe when circuits over how many volts are tested?
300
The stereoscopic-zoom microscope has a minimum of 3.5X and a maximum of how many times magnification to detect hairline cracks in conductor runs and stress in solder joints?
30X
A/c engine oils are identified by either their military specification number (such as MIL-L-23699) or a how many-digit number?
4
How many NO STEP areas are there on the fuselage?
4
How many Technical Directive categories are there?
4
How many basic types of filter circuits are there?
4
How many categories are there in which to declare an a/c strike?
4
How many classes of amplifier operations are there?
4
How many conditions must exist before metal corrosion can occur?
4
How many general categories do maintenance actions in support of the a/c preservation process fall into?
4
How many parts is the JCN made up of?
4
How many types of TDs are there?
4
How many valence electrons do semiconductors usually have?
4
Paper capacitors usually range in value from about 300 picofarads to about how many microfarads?
4
Permanent CDQARs may be assigned when the activity maintains how many or less a/c and is organized according to guidelines set forth in the NAMP?
4
When activities with how many or less a/c assigned or small OMDs elect to organize a QA division, the QA officer and the QA supervisor will be permanently assigned?
4
What temperature range do all high-quality soldering irons operate in?
500 to 600 F
Only insulation tape approved for high-temperature operation (suitable for continuous operation at what temp) should be used in high-temperature environments?
500F
Allow the stripper to remain on the surface long enough for it to wrinkle and lift the paint. This may be from 10 to how many minutes, depending upon temperature, humidity, and the condition of the paint coat being removed?
40
Miniature soldering irons have a wattage rating of less than how many watts?
40
How many distinct types of UJTs are presently in use?
40+
Shunt ohmeters are not commonly used because they are limited generally to measuring resistance from 5 ohms to how many ohms?
400
What is the most widely used frequency for airborne equipment?
400 Hz
Power transformer normally operate from either 60Hz, or what alternating current?
400Hz
Cartridge fuses may be used to protect against excessive heat and open at temperatures of fro 165 degrees F to what?
410 degrees F
The recommended procedure for cooling overheated wheel brake, and tire assemblies is to park the a/c in an isolated location. Then, allow the assembly to cool in ambient air for how many minutes?
45 to 60
How many symbols meet the standard military specifications for schematic diagrams of synchros and synchro connections?
5
Rapid Action Minor Engineering Changes (RAMECs) will have maximum rescission interval of how many years after the issue date?
5
Submit the EI request by routine precedence message within how many working days after discovery of the deficiency?
5
What is the minimum number of valence electrons that insulators have?
5
Within how many days from the time the acceptance inspection was completed must an Acceptance Inspection Deficiency Report (AIDR) be submitted via the Joint Deficiency Reporting System (JDRS)?
5
Within how many working days of discovery for each reportable Foreign Object Damage must the Foreign Object Damage Prevention Program manager submit an Engine Foreign Object Damage Incident Report?
5
No lights other than approved explosion-proof lights are permitted within how many feet of refueling operations?
50
The maximum allowable voltage for a transistor is limited to about 200 volts (but usually how many volts or less)?
50
What materials designated as flammable are used, all sources of ignition must be at least how many feet away from the work location?
50
Wirewound resistors with wattage ratings up to how many watts are not uncommon?
50
Approximately what percent of its original diameter will heat-shrinkable tubing shrink to when it is heated with an electrical hot-air gun?
50%
In most circuits, the actual power used by a resistor i considerably less than the power rating of the resistor because a safety factor of what percent is used?
50%
Ready for Issue (RFI) a/c tire/wheel assemblies shall not exceed 100lbs PSIG or what percent of test pressure, whichever is less, when being stored?
50%
Low speed pre-standard syncrhos must be capable of continuous operation for how many hours at 300 rpm without a load?
500
A system checkout must be given by a qualified AME to all new maintenance personnel before they perform any aircraft maintenance work. Maintenance personnel must be checked out every how many months thereafter before the last day of the re-qualification month?
6
NALCOMIS activities must store completed MAF data in the NALCOMIS OMA database for a minimum of how many months from the completion date?
6
Normally , the I-level maintenance organization consists of how many production divisions?
6
The NAPI consists of how many sections which make it easier to locate and order specific publications and changes?
6
The completed check flight checklists are retained in the a/c maintenance files for a minimum of how many months, or one phase cycle, whichever is greater?
6
How many days prior to deployment should Metrology and Calibration (METCAL) requirements be reviewed to annotate shortages and due dates of assets held by squadron or detachment?
60
Level 1 preservation of engines requires that fuel system to remain at least 95% full of fuel for a period not to exceed how many days?
60
Only about what percent of the conductivity of copper does aluminum have?
60
What solder is the best alloy for electronic work?
63/37
What type of integracted circuits containing over 2,000 logic gates or greater that how many bits of memory?
64,000
How many positions is the Work Unit Code (WUC) assigned by Maintenance Control for each major inspection?
7
MIL-C-81309 corrosion-preventive compound is a water-displacing compound and lubricant that must be reapplied frequently. On exposed surfaces, protection lasts about how many days at best?
7
The HSU-1 service unit has how many-foot service hose connected to the unit's fluid output port at the pump assembly?
7
Sealants should not be applied to metal that is colder than what?
70 F
Filiform corrosion occurs when the relative humidity of the air is between 65-90%, and the air temperature is between which temperatures?
70-100 F
The daily inspection is valid for a period of how many hours, provided no flight occurs during this period and no maintenance other than servicing has been performed?
72
When possible, refueling an a/c from a truck should be carried out 50ft from any other a/c or structure and how many feet from any operating radar set?
75
What temperature is the maximum average forward current usually given at?
77 degrees F
When a symbol is used on a schematic, it will be accompanied by the military abbreviation of one of how many synchro functional classifications?
8
Cartridge fuses can be rated at voltages up to 10,000 volts and have current ratings of from 1/500 (.002) ampere to how many amperes?
800
What is the dielectric of pure water?
81
What is the minimum passing score for written Phase 2 examinations?
85%
Ear protectors are required to be worn when a noise level exceeds what?
85dB
Any personnel removed from aircraft maintenance responsibilites for more than how many days must receive and egress system checkout before performing any a/c maintenance?
90
By now many degrees from that in a purely resistive circuit will the voltage in a purely reactive circuit differ in phase?
90
How many days of Ready For Issue (RFI) shelf life are spare Aviation Life Support Systems (ALSS) assemblies authorized that are maintained in the IMA 800 Division rotatable pool before they begin to accumulate time for inspection purposes?
90
Latex rubber is a high-grade compound consisting of what percent of unmilled grainless rubber?
90
Personnel who have been removed from a/c maintenance responsibilities for how many or more days must receive an egress/explosive system checkout before performing any a/c maintenance?
90
QA must visually review every welder's proficiency against the welder's test plate ever how many days?
90
Routine NATOPS flight manual changes are generally issued every how many days?
90
Target Completion Dates initiate a TD status review which shall be performed how many days prior to Target Completion Dates?
90
The Officer in Charge of a detachment may designate QA personnel if all procedures and requirements for designating QA personnel are accomplished by the detachment and the deployment is in excess of how many days?
90
Which wire prevents an electrical shock to the operator in case there is an electrical short to the frame of the appliance or tool?
Ground
Synchros are used primarily for the rapid and accurate transmission of what between equipment and stations?
Information
Conductors, Semiconductors, along with what else are the three categories that all elements that make up matter can be placed into?
Insulators
What are materials in which the forbidden gap is so large that practically no electrons can be given enough energy to cross the gap?
Insulators
Which type of motors is the drum-wound armature generally used in?
AC
What is the simplest elementary generator that can be built?
AC generator
What is the most accurate method of zeroing a synchro?
AC voltmeter
What gives maintenance/aircrew personnel an accurate, comprehensive, and chronological record of flights and maintenance performed on a specific a/c by bureau number (BUNO) for at least the last 10 flights?
ADB
What is the title of an overall program that provides the data required for effective management of SE at all levels of aircraft maintenance?
AMMRL
Normally, QA work spaces are near the production divisions and the what?
AMO
QARs, CDQARs, and CDIs must be designated in writing by whom?
AMO
Who manages the SE Training and Licensing Program?
AMO
Who sets the format and the arrangement of the MMP?
AMO
Equipment should be properly packaged in accordance with which standard to minimize damage during shipment?
MIL-STD-2073-1
Program Managers must ensure that a/c paint schemes are maintained per which publication?
MIL-STD-2161B(AS)
which type of bacteria require oxygen to live?
Aerobic
what is the primary consideration of an manufacturer during the design and production of an aircraft?
Aerodynamic efficiency
Which type of current regularly changes direction?
Alternating
Impact tools, such as the needle gun (pneumatic descaler), provide a rapid means for removing rust and old paint from metal surfaces of SE. These tools must NEVER be used on what?
Aluminum
What are terminals that are used with aluminum wire made of?
Aluminum
Who maintains the SERMIS file by establishing and maintaining a SERMIS application guide, which includes SERMIS codes, avionics system number, and standard allowance symbols?
ASO
What evaluations are conditional maintenance actions that are depot-level evaluation of an aircraft's general material condition?
ASPA
What lists the item and quantities of aeronautical material authorized to be stocked by an aircraft carrier to support the maintenance and operations of embarked aircraft?
AVCAL
The purpose of what program is to ensure a safe environment when aeronautical fuel systems are worked on?
AVGFE
What code is one-digit, numeric code used to show the reason no maintenance is being performed?
AWM
What validation ensures all parts on order by a particular command are still required and all required parts are still on order?
AWP
Which type of blasting is the preferred surface preparation method for many of the components of SE?
Abrasive or grit
what can be used to remove severe corrosion (intergranular or exfoliation) on thick metal?
Abrasive wheel
The primary concern in removing volcanic ash is the extreme what of the ash?
Abrasiveness
What is one of the greatest dangers to the transistor which will cause values that if exceeded in operation may result in transistor failure?
Absolute Maximum Ratings
Which transistor properties are the direct voltage and current values that if exceeded in operation may result in transistor failure?
Absolute Maximum Ratings
Servo systems are also classified according to their functions which include position, velocity, along with what else?
Acceleration
Which report identifies/documents defects in newly manufactured, modified or reworked a/c to ensure better quality maintenance and newly rework procedures?
Acceptance Inspection Deficiency Report (AIDR)
Which software application was designed for the Aviation Maintenance Training Continuum System (AMTCS) to identify job task requirements, assist in determining proficiencies, document qualification/certifications and track completed training and aviation maintenance personnel progress within their respective Qualified and Proficient Technician (QPT)/Maintenance Training Management and Evaluation Program (MATMEP)?
Advanced Skills Management (ASM)
What are used to establish a formal, continuous chain of accountability for specific equipment and material installed on or designated for use on any a/c of a specified T/M/S?
Aircraft Inventory Records (AIR)
What is the subset of the a/c Standard Depot Level Maintenance (SDLM) specification which establishes inspection procedures to determine an individual a/c material condition prior to induction to or a 12 month deferral of Standard Depot Level Maintenance (SDLM)?
Aircraft Service Period Adjustment (ASPA)
Which record shall be initiated by the cognizant O-level activity upon the initial issue of personal equipment to the aircrew member?
Aircrew Personal Equipment Record (OPNAV 4790/159)
Which record is designed to provide a current configuration and inspection record of Aviation Life Support Systems (ALSS) components, kits and assemblies?
Aircrew Systems Record (OPNAV 4790/138)
Since pure aluminum is more corrosion resistant than most alloys, aluminum sheet stock is often covered with a thin layer of nearly pure aluminum called cladding or what else?
Alclad
Who invented the photophone?
Alexander Graham Bell
What is a basic tool used to solve electrical problems?
Algebra
What is an aliphatic hydrocarbon product used as an alternate compound for cleaning acrylics?
Aliphatic naphtha
What is the relationship of collector current (output current) to emitter current (input current)?
Alpha
What begins at the extreme left-hand position of a number and continues form the left to the right, one position at a time, until all digits have been considered?
Alphanumeric sequence
Which device is used to measure current?
Ammeter
What is used in the lavatories of aircraft to neutralize urine and waste products?
Ammonium hydroxide
What supply large DC currents, precisely controlled, to the large DC motors used to drive heavy physical loads, such as gun turrets and missile launchers?
Amplidynes
Which device provides amplification without appreciably altering the original signal?
Amplifier
What is often used when it is necessary to block the voltage between one electronic circuit and another, and transfer the signal at the same time?
Amplifier coupling capacitor
In a DC position servo system, which properties of a DC error signal respectively are used to determine the amount and direction the load will be driven?
Amplitude and polarity
Bacteria may be either aerobic or what else?
Anaerobic
How often are D-level over haul requirements submitted by the Support Equipment Controlling Authority (SECA) to COMNAVAIRSYSCOM for input to the Support Equipment Resources Management Information System (SERMIS) for planning, funding and scheduling for the fiscal year?
Annually
When current is out of phase with the voltage, the power indicated by the product of the applied voltage and the total current gives only what is known as what?
Apparent power
What are the magnets that are produced from magnetic materials called?
Artificial magnets
What is the process by which a person who has stopped breathing can be saved called?
Artificial ventilation
Which general term is used to describe several fibrous mineral silicates?
Asbestos
Which type of fibers have been found to cause severe lung damage and cancer of the gastrointestinal tract?
Asbestos
What is the smallest particle into which an element can be broken down and still retain all its original properties?
Atom
What is the smallest unit of an element, made up of a positively charged nucleus by a system of negatively charged electrons?
Atom
Which Quality Assurance term is defined as a periodic or special evaluation of details, plans, policies, procedures, products, directives and records?
Audit
What provides an evaluation of performance throughout the department and serve as an orderly method of identifying, investigating, and correcting deficiencies?
Audits
Which type of switch is controlled by a mechanical or electrical device?
Automatic
What type of device "sense" changes in output voltage and causes a change in field resistance to keep output voltage constant?
Automatic voltage control
Which type of coatings increase a surface's resistance to corrosion and improve paint bonding on the surface
Chemical conversion
What is a five-digit number the federal government assigns to activities, such as manufacturer,vendor, or government agencies?
CAGE
QARs and what else must be highly qualified personnel with the ability to ensure quality of maintenance within their technical areas?
CDIs
Usually, in a small OMD under a one work center concept, qualified personnel are designated as what to carry out the QA verification functions?
CDQARs
Which publication contains the procedures that all maintenance, supply handling and account of communications security and telecommunications security equipment will be performed with?
CMS-1
What is the USN Aviation Support Equipment Operator's License form number?
CNAF 4790/102
What is the Assembly Service Record form number?
CNAF 4790/106A
What is the Artisan Inspector designation form number?
CNAF 4790/11
What is the QA Representative/Inspector Recommendation/Designation form number?
CNAF 4790/12
What is the Aircraft Inspection and Acceptance Record for number?
CNAF 4790/141
What is the Plane Captain Designation form number?
CNAF 4790/158
Training requirements for miniature and micro-miniature repair personnel were developed under guidelines established by whom?
CNO
What is used to fight electrical fires because it is nonconductive and the safest to use in terms of electrical safety?
CO2
What should never be used to cool overheated brakes?
CO2
What represent the SECA within their geological areas of responsibility?
COMFAIRs
What is the lead system command for the Navy's Metrology and Calibration (METCAL) program?
COMNAVSEASYSCOM
which technique has been developed to provide aid to a person who has stopped breathing and suffered a cardiac arrest?
CPR
What lists the items that are exempt from the mandatory one-for-one turn-in?
CRIPL
What controls technical publication activities within the command?
CTPL
When removing hermetically sealed units pay particular attention to cable clamp areas, bindings securing were harnesses, and what else. these are areas where salt and fire extinguishing agents can become entrapped?
Cable connectors
What is used as a coating to protect steel hardware, such as bolts, washers and screws and as a plating on electrical connectors?
Cadmium
What is usually used on bolts as a sacrificial metal to protect the base metal?
Cadmium
What is defined as a scheduled performance evaluation and correction requirement for certain specified SE items?
Calibration
What is the process by which a TD is removed from the active files?
Cancellation
The opposition which a capacitor offers to AC is inversely proportional to frequently and capacitance. What is this opposition called?
Capacitive reactance
What is the most basic type of power supply filter?
Capacitor filter
Plug-type along with what else are the basic two types of fuses?
Cartridge
What type of fuses is the clip-type fuseholder used for?
Cartridge
What sealants are transformed form a fluid or semifluid state into a solid mass by chemical reaction of physical change rather than by evaporation of a solvent?
Catalyst-cured
Which category of Product Quality Deficiency Reports (PQDRs) will be used for all quality deficiencies which may cause death, injury or severe occupational illness?
Category 1
Which strike category via XRAY will be used by reporting custodians if an a/c is lost (not recovered) or destroyed?
Category 1
Which category of Product Quality Deficiency Reports (PQDRs) will be used for quality deficiencies assessed to have significant and widespread material or human resource impact but do not affect safety of personnel or impair combat efficiency?
Category 2
Which Technical Publications Deficiency Report (TPDR) category would a non-safety related technical publication deficiency resulting in a maintenance delay of less than 8 hours through an acceptable workaround fall under?
Category 3
Which strike category covers obsolescent or excess a/c and a/c intentionally destroyed in tests, training or battle?
Category 3
Which Technical Publication Deficiency Report (TPDR) category is a non safety related technical publication deficiency of a non-technical or administrative nature that has no impact on mission readiness?
Category 4
Which category of SE/Armament Weapons Support Equipment (AWSE)/ Weapons Handling Equipment (WHE) is anticipated to be used within the next 90 days?
Category A
Which category of SE/Armament Weapons Support Equipment (AWSE)/Weapons Handling Equipment (WHE) is anticipated to be used within the next 180 days?
Category B
What provides a central course of up-to-date information for the use of all personnel I the performance of their work?
Central Technical Publications Library (CTPL)
What is a document containing instructions and information that directs the accomplishment and recording of a material change, a repositioning, a modification, or an alteration in the characteristics of the equipment to which it applies?
Change
What to a technical manual is the official release of new or corrective pages to a part or portion of an existing document?
Change
What type of fluxes are not suitable for electronic soldering because they are highly corrosive, electrically conductive, and are difficult to remove from the soldered joint?
Chloride
What is used to monitor the operation of an electrical or electronic device, or to determine the reason a device is not operating properly?
Circuit measurement
Which devices are used to stop current flow or open circuits?
Circuit protection
What is the standard unit of measurement of a round wire cross-sectional area?
Circular mil
Which class of Navy Training School teaches the basic knowledge/skills that are required for entry level performance?
Class A
Which class of amplifiers are biased so that variations in input signal polarities occur within the limits of cutoff and saturation?
Class A
Which amplifier class has the highest efficiency of the four classes of amplifier operations?
Class C
Which class of Navy Training school teaches advanced knowledge and skills that are required to fill a billet code with a Navy Enlisted Classification (NEC)
Class C
Which class of Navy Training School is defined as professional Chief of Naval Operations (CNO) mandated or non-pipeline refresher training?
Class D
What are control systems broadly classified as?
Closed or Open loop
Which type of control systems are the most commonly used type in the Navy because they respond and move the loads they are controlling quicker and with greater accuracy than other systems?
Closed-loop
What is defined as two concentric wires, cylindrical in shape, separated by a dielectric of some type?
Coaxial cable
What type of maintenance consists of inspecting,servicing, lubricating, adjusting, and replacing parts, minor assemblies, and subassemblies?
Code O
Which standard has the National Electric Code (NEC) adopted as the minimum requirements for rubber insulation as specified by Underwriters' Laboratories?
Code-graded rubber
what identifies the systems command, office, agency, or Navy inventory manager that controls the category of material?
Cognizance Symbol
What is formed by wire wound around a core?
Coil
Which personnel are permanently assigned to a production or fleet readiness aviation maintenance personnel work center and have a collateral duty for inspecting work done by the work center?
Collateral Duty Inspectors (CDIs)
Aircraft Battle Damage repair (ABDR) is only performed under which conditions?
Combat
Which type of circuits consist of both series and parallel elements?
Combination
Who is responsible for maintaining records and acting as the reporting custodian when Naval a/c are loaned to non-Naval activities?
Commander, Naval Air Systems Command (COMNAVAIRSYSCOM)
Who is responsible for providing policy direction, exercising control and coordination of the Training Audit Program?
Commander, Naval Air Systems Command (COMNAVAIRSYSCOM)
Who is responsible for the aviation Hazardous Material Control and Management (HMC&M) Program?
Commander, Naval Air Systems Command (COMNAVAIRSYSCOM)
What is the most frequently used arrangement in practical amplifier circuits?
Common-Emitter configuration (CE)
What is the process by which a DC voltage output is taken from an armature that has an AC voltage induced in it?
Commutation
By what means in a DC generator is the EMF generated in the armature windings converted from AC to DC?
Commutator
Which type of system is defined as any system or instrument which uses the earth's magnetic field as its primary source of heading information, whether employed as a navigational aid, computer input for weapons delivery systems, or magnetic variation computations in inertial navigation?
Compass
Intermediate and depot-level manuals are based on what rather than system breakdown?
Component
Which type of inventory are explosive devices treated as?
Component
The 2M repair set consists of special electrical units, tools, and materials necessary to make high-reliability repairs to what?
Component circuitry
What is a chemical combination of two of more elements called?
Compound
Which type of motor has both shunt and series motor characteristics?
Compound
What maintenance requirements are unscheduled events required as the result of a specific overlimit condition, or a result of circumstances or events hat create an administrative requirement for an inspection?
Conditional
What is the ability of a material to pass electrons referred to as?
Conductance
What is a band in which energy level of the electrons is high enough that the electrons will move easily under the influence of an external field?
Conduction
What is a material in which the forbidden gap is so narrow that it can be considered nonexistent?
Conductor
Which type of wire is suitable for carrying an electric current?
Conductor
What are made up of atoms that contain loosely bound electrons in their outer orbits?
Conductors
What are solid materials called that have many electrons in the conduction band?
Conductors
What problem may be created at the contacts when current flows in one direction through a relay?
Cone and crater
What provides a means for holding electrolytes?
Container
Of all the solder connection extraction methods currently in use, what is the most versatile and reliable?
Continuous vacuum
What is the only consistent method for overcoming the re-sweat problem for either dual or multi-lead devices terminating in through hole solder joints?
Continuous vacuum extraction
What is a control synchro device accurately governing some type of power amplifying device used for moving heavy equipment?
Control transformer
What alloys used in a/c have a cadmium-plated finish to prevent surface straining and decay?
Copper
Which element is the most widely used conductor throughout electrical applications?
Copper
Various compounds of silver oxide along with which other typeof material are the most commonly used photosensitive materials used to produce a photoelectric voltage?
Copper oxide
What are inductors classified according to?
Core type
What is the discharge of electricity from the wire when it has a high potential called?
Corona
What does a rotating armature require to conduct the current from the armature to the load?
Slip rings and brushes
Which type of action is defined as the resolution of a problem or deficiency?
Corrective
Which condition exists when both transmitter and receiver in a synchro system are on zero or displaced from zero by the same angle?
Correspondence
Each reporting custodian shall designate a what, whose duties include organizing and supervising the emergency reclamation team?
Corrosion Control Officer
Which program establishes policy, responsibilities and requirements to minimize corrosion damage to a/c, engines, components and SE and provides direction for emergency reclamation?
Corrosion Prevention and Control Program
What is the cracking of metals knows as that is caused by the combined effects of cyclic stress and corrosion?
Corrosion fatigue
What type of fluxes are Zinc chloride, hydrochloric acid, and sal ammoniac?
Corrosive
What are the two classes of flux?
Corrosive and noncorrosive
What is the practical unit adopted for measuring charges?
Coulomb
Which laws states that "charged bodies attract or repel each other with a force that is directly proportional to the product of their individual charges, and is inversely proportional to the square of the distance between them"?
Coulomb's Law
Concentration cell corrosion is controlled and prevented by avoiding the creation of what during repair work?
Crevices
Which type of defects constitute hazardous or unsafe conditions, or as determined by experience and judgment could conceivably become so, thus making the a/c unsafe for flight or endangering operating personnel?
Critical
Which type of deficiency is a defect that judgment and experience indicate is likely to result in hazardous or unsafe conditions for individuals using or maintaining it?
Critical
All metals consist of many tiny building blocks called what?
Crystals
What is a neutralizing agent for sulfuric acid battery electrolyte deposits?
Sodium bicarbonate
A dielectric material, or insulator, is rated as to its ability to respond to electrostatic lines of force in terms of a figure called what?
Dielectric constant
What may be defined as an effect in a dielectric material similar to the hysteresis found in a magnetic material?
Dielectric hysteresis
Insulation resistance along with what else are the two fundamental properties of insulating materials?
Dielectric strength
What is primarily a means of relieving you of details?
Delegating authority
The output frequency of alternator may be joined together in either wye or which other connections?
Delta
The stator coils of three-phase alternators may be joined together in either wye or which other connections?
Delta
what is the transfer of electrostatic charge between bodies at different electrostatic potentials?
ESD
Currents induced in a conductor when it is rotated in a magnetic field are known as what?
Eddy currents
Which maintenance level of FRCs are not required to maintain an Oil Consumption Program?
D-level
What is the best type of motor for motors that require variable speeds?
DC
What is the maximum reverse DC voltage that will not cause breakdown called?
DC Blocking voltage
A current-carrying conductor placed in a magnetic field, perpendicular to the lines of flux, tends to move in a direction perpendicular to the magnetic lines of flux is the principle behind the operation of what?
DC motor
What can be used to drive an AC series motor efficiently?
DC power
What is the Oil Analysis Requests form number?
DD 2026
What is the material Inspection and Receiving Report form number?
DD 250
What form allows a military activity rendering a service to bill your squadron?
DD Form 1348
All parts and components removed from the a/c, missile or equipment shall be "green" tagged (what form) for identification, description of the accident/incident experienced listing of the contaminants and chemical materials to which they were exposed and to indicate the type of CPC applied?
DD Form 1577-3
The power loss of a capacitor is determined by loss in the what?
Dielectric
Which publication should be consulted for proper application of priority designators to Maintenance Action Forms (MAFs)?
DOD 4140.1R
DARs should be verified how often, corrections annotated, and returned to the analyst?
Daily
How often are Technical Directive Status Accounting database updated to reflect new Technical Directive compliance actions against applicable equipment items?
Daily
How often must FOD walkdowns be scheduled and performed on all flight areas, engine test facilities, and adjacent aprons?
Daily
Inspection of drains is a standard requirement, especially aboard ship how often?
Daily
The work centers should verify their VIDs boards with the maintenance control VIDS board at least how often?
Daily
What is one of the best tools for ensuring a smooth flow of information about maintenance between shifts and other supervisors?
Daily maintenance meeting
Synchro torque receivers, commonly called synchro, are electrically identical to torque transmitter of the same size except for the addition of some form of what?
Damping
What is the process known as of "smoothing out" the oscillation of the pointer?
Damping
Which method is used in synchro receivers to prevent the rotor from oscillating or spinning?
Damping
There are two types of part numbers; what are they?
Definitive and nondefinitive
What is returning a part of the output back to its input known as?
Degeneration
What is the amount by which one sine wave leads or lags another sine wave measured in?
Degrees
What are classified as conductors no longer bonded to the board surface?
Delaminated conductors
Which type of fuse will allow temporary increases in current (surge) without opening?
Delay
What are two terminal semiconductors of various types that are used in seemingly endless applications?
Diodes
Which term is used to describe a situation in which some point in the circuit, where full system voltage is present, come in direct contact with the ground or return side of the circuit?
Direct shore
What is the directed migration of mobile electrons due to the potential difference called?
Directed drift
Who establishes policy and exercises overall control of the MTIP Program?
Director of Air Warfare
Who overseas and coordinates the efforts of the Quality Department?
Director of Quality
What is the current called which appears to flow through a capacitor?
Displacement
Who are responsible for establishing and maintaining training programs for production personnel involved with QA functions?
Division officers
What is the process by which small amounts of selected additives, called impurities, are added to semiconductors to increase their current flow?
Doping
Whose initial work led to the development of zener diode which is frequently used today to regulate power supply voltages at precise levels?
Dr. Carl Zener
What type of armature is almost universally used in modern DC generators?
Drum-type
What is only approved blasting method of removing corrosion on assembled a/c?
Dry honing
what solvent should not be used in oxygen areas or around oxygen equipment?
Dry-cleaning
What sealants set and cure by evaporation of the solvent?
Drying
What was designed primarily to overcome the difficulties associated with handling and inserting packages into mounting boards?
Dual Inline Package (DIP)
What are not used in most operating squadrons because they are a foreign object damage (FOD) hazard?
Dust covers
What is the minimum enlisted grade that personnel should be to be designated as the Advanced Skills Management (ASM) Fleet Administrator?
E-6
What is the minimum enlisted paygrade that personnel should be to be assigned as a 2M Technician Recertifier?
E5
What formula can be used to calculate voltage if the current and resistance are known?
E=IR
What are the formulas derived for Ohm's law used in AC?
E=IZ I=E/Z
What apply to all a/c and weapons systems, their subsystems, equipment, components, related SE, special tools, fluids, and materials used in operating the equipment?
EI's
What codes are documented when a specific system or subsystem is degraded and impacts the mission capability of that equipment or a/c?
EOC
What is the value of alternating voltage or current that will have the same effect on a resistance as a comparable value of direct voltage or current will have on the same resistance?
Effective
What are alternating voltage and current usually expressed in?
Effective values
Which amplifier property refers to the ratio of output-signal power compared to the total input power?
Efficiency
Which electrical device property is the ratio of power converted to useful energy divided by the power consumed by the device?
Efficiency
What coatings are used as a coating system to protect exterior laminated plastic parts of high-speed a/c, missiles, and helicopter rotary blades form rain erosion in flight?
Elastomeric
Rubbers along with what else are used for insulation, seals, gaskets, caps, tubing, films and coatings?
Elastomers
What is a complete conducting pathway called?
Electric circuit
What is the space called between and around charged bodies in which their influence is felt?
Electric field of force
What is the reference point for alignment of all synchro units?
Electrical Zero
What are the two types of damping methods?
Electrical and Mechanical
What is the most common type of corrosion (and the one that can be most effectively treated by maintenance personnel)?
Electrochemical
What is the process called when a cell converts chemical to electrical energy?
Electrochemical action
The two most important factors in preventing corrosion, and the only factors that can be controlled by field personnel, are the removal of the what and the application of protective coatings?
Electrolyte
what formation results from condensation of moisture?
Electrolyte
Which type of capacitor is used when a large amount of capacitance is required?
Electrolytic
What is defined as the total sum of all radiated and conducted electromagnetic energy in a given area?
Electromagnetic Environment (EME)
Which substance cannot be reduced to a simpler form by chemical means?
Element
The primary goal of the what is to accomplish the necessary salvage operations after an a/c accident?
Emergency Reclamation Team
What solvent cleaning is an effective cleaning method for removing heavy oil, grease, wax, and other contaminants of SE?
Emulsifiable
What in addition to conformal coatings are used to envelop an avionic component, module or assembly?
Encapsulates
What provide an investigation process to determine cause and depth of fleet-reported material failures?
Engineering Investigations (EIs)
What uses voltage to control an electrostatic field within the transistor?
FET
An a/c in what category can safely perform all of its intended missions and return to its base of operations?
FMC
What is damage to aeronautical equipment caused by objects and debris foreign to that equipment?
FOD
Which units are used to measure capacitance?
Farad
Delay, Standard, along with what else are the three fuse time delay ratings?
Fast
Which type of charge is used when a battery must be recharged in the shortest possible time?
Fast
Which type of fuses are used to protect devices that are very sensitive to increased current?
Fast
What is caused by the combined effect of corrosion and stress applied in cycles to a component?
Fatigue corrosion
Which type of materials are relatively easy to magnetize?
Ferromagnetic
What are the two categories of materials hat make up the protect wires and cables?
Fibrous braid
What is the faithful reproduction of a signal called?
Fidelity
What is it called when a DC voltage is applied to the field windings of a DC generator which causes current flows through the windings and sets up a steady magnetic field?
Field excitation
What position in the SM&R code indicates the recoverability code?
Fifth
What gives an indication of how much the output voltage changes over a range of load resistance values?
Figure of merit
Which type of corrosion is a form of crevice corrosion which occurs on metal surfaces having a thing organic protective coating?
Filiform
what consists of threadlike filaments of corrosion known as underfilm?
Filiform corrosion
Which type of device has two or more diodes arranged so that load current flows in the same direction during each half cycle of the ac supply?
Full-wave rectifier
What is the easiest way to find the power factor?
Find the Power angle cosine
The IMRL has how many major sections?
Five
The individual WP has a how many-digit code number that appears in the upper right corner of the page?
Five
What are the two kinds of resistors?
Fixed and Variable
What can paint be mechanically removed with?
Flap brush
What is defined as the minimum temperature at which a liquid gives off an ignitable vapor within a test vessel?
Flash point
Which type of charge is used to keep a battery at full charge while the battery is idle or in light duty?
Floating
Hydraulic system contamination levels are monitored by means of what program?
Fluid Surveillance
What chemically breaks down surface oxides and causes the oxide film to loosen and break free from the metals being soldered?
Flux
Which cleaning agent is used to remove oxidation during soldering?
Flux
What is the number of flux lines per unit area known as?
Flux density
What is the measurement of work?
Foot-pounds
What are used to determine whether the airframe, power plant, accessories and other items of equipment are functioning in accordance with predetermined standards while subjected to the intended operating environment?
Functional Check Flight Checklist
The bonding and grounding straps used on a/c and electrical equipment are major sources of what corrosion?
Galvanic
Liquid oxygen (LOX) is converted to what state before its delivery to the aircrew?
Gaseous
Solid, Liquid, along with what else are the 3 different types of matter?
Gaseous
After removal of exfoliation corrosion by abrasive wheel, VACU-Blast area with what to ensure removal of all corrosion?
Glass beads
Which type of armature is seldom used in modern DC motors?
Gramme-ring
What can be constructed to easily analyze a circuit?
Graph
Liquid oxygen can explode when it comes into contact with oil or what else?
Grease
Which symbol is used to represent the ohm?
Greek letter omega
Which term is used to denote a common electrical point of zero potential?
Ground
Which system contains MSDSs as well as value added information on specific Hazardous Material (HAZMAT) characteristics to assist in the management of HAZMAT throughout its life cycle?
Hazardous Material Information Resource System (HMIRS)
What provide a standard method for reporting material deficiencies which, if not corrected, could result in death of injury to personnel, or damage to or loss of a/c, equipment or facilities?
Hazardous Material Reports (HMRs)
What is one of the greatest dangers to the transistor which will cause excessive current flow and eventual destruction of the transistor?
Heat
Which method is the rate at which heat is produced in a resistance form a convenient basis for establishing an effective value of alternating current known as?
Heating effect
SERMIS is the repository of master data for printing what?
IMRLs
What is used to remove exhaust gas stains and to polish corroded aluminum surfaces?
Impregnated cotton wadding
Which Quality Assurance term is defined as the examination and testing of supplies and services that include raw materials, components and intermediate assemblies to determine whether they conform to specific requirements?
Inspection
What is the repair by COMNAVAIRSYSCOM Fleet Support activities of a/c damaged beyond the repair capability of Aircraft Controlling Custodians (ACCs) maintenance activities?
In-Service Repair (ISR)
What publishes a list of threshold sampling candidates, quantities and milestones for each engine?
In-Service Support Center (ISSC)
Which type of training is conducted by fleet activities to complement formal training and increase professional safety, technical knowledge and proficiency?
In-Service Training (IST)
Which type of meter is used to monitor the operation of the device in which it is installed?
In-circuit
What inspections are specific QA functions that are required during the performance of maintenance requirements and actions when satisfactory task performance cannot be determined after the task has been completed?
In-process
Which type of inspections are specific QA functions required during the performance of maintenance requirements and actions where satisfactory task performance cannot be determined after the task has been completed?
In-process
Which program establishes policy, responsibilities and requirements for local repair capabilities of the Intermediate Maintenance Activity (IMA)?
Individual Component Repair List (ICRL)
Which program was designed to ensure that the required SE is available in the activity, similar D-level work unit or team?
Individual Material Readiness List (IMRL)
The total resistance of a series circuit is equal to the sum of the what?
Individual resistance
Which electrical circuit characteristic opposes the starting, stopping, or a change in value of current?
Inductance
Induction motors, single-phase or polyphase, whose rotors are energized by what, are the most commonly used AC motor?
Induction
What is the most commonly used type of AC motor?
Induction
The voltage-current phase relationship in a capacitive circuit is exactly opposite to that in what?
Inductive circuit
Which mass characteristic opposes a change in velocity?
Inertia
Which term represents a quantity so large it cannot be measured?
Infinity
What identify the procedures of connecting circuitry on one side of a board with the circuitry on the other side?
Interfacial connections
Which level of maintenance is work performed in centrally located facilities for the support of operating activities within a designated geographical area?
Intermediate
Treated equipment that is of questionable operating status should be forwarded to the nearest what?
Intermediate Maintenance Activity (IMA)
What do most large DC motors depend on to correct armature reaction?
Interpoles
What reduce the effects of armature reaction?
Interpoles
What is the process by which an atom loses or gains electrons called?
Ionization
What state is the atom said to be in when in loses electrons or gains electrons?
Ionized
Most power transformer are of what type?
Iron-core
Which type of diagram shows outlines of a ship, airplane, or piece of equipment?
Isometric
What is constructed by using the activity's organization code, the Julian date on which the a/c was inducted for inspection and an alpha/numeric serial number?
Job Control Number (JCN)
What is probably the most important single aid in estimating time and personnel requirements for maintenance tasks?
Job plan
What must be used to submit all Technical Publications Deficiency Reports (TPDRs)
Joint Deficiency Reporting System (JDRS)
Technical Manual Application System (TMAPS) along with what else are the only authoritative source for all technical data, whether pre-flight, in flight, or post flight for aircraft/engines or any equipment/systems supporting naval operation?
Joint Knowledge Caching Servers (JKCS)
Which type of transistor generates less noise, handles more power, provides higher current and voltage gains, and can be mass produced more cheaply than the point-contact transistor?
Junction
What are the two most widely known semiconductors that are in use today?
Junction diode and the transistor
What should a horseshoe magnet always be stored with?
Keeper
Alternator ratings for small units are in volt-amperes and what is it in large units?
Kilovolt-amperes
Which type of energy is contained by an object due to its motion?
Kinetic
Which law states that "The algebraic sum of the voltage drops in any closed path in a circuit and the electromotive forces in that path is equal to zero."?
Kirchhoff's voltage law
What is one of the most commonly used filters primarily used in radio receivers, small audio amplifier power supplies, and in any type of power supply where the output current is low and the load current is relatively constant?
LC capacitor-input filter
Which type of filter is primarily used in power supplies where voltage regulation is important and where output current is relatively high and subject to varying load conditions?
LC choke-input
What is done to transformer cores to minimize the loss resulting from eddy currents?
Lamination
What can be used to minimize copper loss in armature windings?
Large diameter wire
What can be used to determine the direction of current in a given situation?
Left hand rule for generators
Which conductor rule can the relation between the direction of the magnetic lines of force around a conductor and the direction of electron current flow in the conductor be determined?
Left-Hand rule
What is any device that draws current defined as?
Load
what is any device called in which an electrical current flows and which changes this electrical energy into a more useful form?
Load
What can a conductor be formed into in order to increase inductance?
Loop/Coil
The plane captain takes fuel samples from what of all fuel cells/tanks before the first flight of the day?
Low-point drains
What at the organizational and intermediate levels (O and I levels) of maintenance is the point of contact for material needed by maintenance personnel?
MCC
What provides cross-reference information from a reference number (a manufacturer's part number, a drawing number, or a design control number) to its NSN?
MCRL
What provides qualitative and quantitative analytical information to the AMO via the MMCO for continuous review of management practices within the department of activity?
MDBA/A
What report summarizes by work center all maintenance actions TD compliance and data entered in the Failed/Material block of the VIDS/MAF?
MDR-2
What programs goal is to provide a single, uniform management information system for the Navy METCAL Program?
MEASURE
What program was designed to make sure that all equipment requiring calibration/servicing is maintained at maximum dependability?
METCAL
What should be used to document all Metrology and Calibration (METCAL) program calibration and repair actions?
METER Card (OPNAV 4790/58)
What is the unit of conductance?
MHO (G)
Technical information and local policy are issued through what?
MI's
What a/c cleaning compound is the primary cleaning compound used on naval a/c?
MIL-C-85570
Which type of hydraulic fluid is now being used in the hydraulic systems of all naval a/c?
MIL-H- 83282
Per which publication must Electrostatic Discharge Sensitive (ESDS) be packaged prior to shipment?
MIL-HDBK-773
Which series of manuals provide technical information related to the configuration, application, function, inspection and maintenance of Aviation Life Support Systems (ALSS)?
NAVAIR 13-1-6
What addresses specific requirements for the cleaning, inspeciton, protection, maintenance, and depreservation of auxiliary power units, gas turbine engines, and reciprocating engines?
NAVAIR 15-01-500
For a complete list, description, and application of avionic cleaning materials, you should refer to what?
NAVAIR 16-1-540
All SE/Armament Weapons Support Equipment that will not be used for extended periods must be preserved per which publication?
NAVAIR 17-1-125
Authorized SE cleaning materials and procedures are identified in what?
NAVAIR 17-1-125
Which reference contains requirements for lead-acid and nickel-cadmium battery safety?
NAVAIR 17-15BAD-1
Which publication is the primary basis for ensuring the technical adequacy of COMNAVAIRSYSCOM calibration laboratories?
NAVAIR 17-35QAC-01
What is the controlling custodian for pre-accepted a/c?
NAVAIR ACC
Which publication reflects the combined COMNAVAIRSYSCOM/COMNAVSEASYSCOM 2M certification and recertification requirements?
NAVAIR SE-004-PQS-000
Policy for the management of automation-type technical manuals is contained in what instruction?
NAVAIRINST 13630.1
Two NAVAIR instructions describe the procedures for allowance and inventory control, NAVAIRINST 13650.1 for IMRL items and what for TOL items?
NAVAIRINST 13630.1
Maintenance activities submit IMRL revision requests following the procedures outlined in what instruction?
NAVAIRINST 13650.1
Which instruction contains provisions for revising SE allowances in the Support Equipment Resources Management Information System (SERMIS) and in the activities Individual Material Readiness List (IMRL)?
NAVAIRINST 13650.1
What instruction establishes the TMINS for aeronautic publications?
NAVAIRINST 4160.1
General procedures and basic policies for the recovery, reclamation,and transfer of crash-damaged a/c are contained in OPNAVINST 3750.6, OPNAVINST 5442.4, and what other instruction?
NAVAIRINST 4500.11
What contains complete information on the RAMEC program?
NAVAIRINST 5215.10
What determines when there is a requirement to change a manual and authorizes that the change be made?
NAVAIRTECHSERVFAC
Which instruction contains D-level maintenance policy, procedures and responsibilities for SE?
NAVIARINST 13680.1
Component repair of engines included in the COMNAVAIRSYSCOM Non-avionic Common Support Equipment (CSE) Quick Engine Change Assembly (QECA) program will be performed per which instruction?
NAVICPINST 4400.75
Which publication defines rates and ratings by describing the Navy's requirements and identifies additional skills required in specific billets which are supplemental to rating skill requirements?
NAVPERS 18068F Volume 2
What is the special calibration label form number?
NAVSEA 4734/15
What outlines the procedures that affect your material control center and supply department in manuals, publications,and directives?
NAVSUP
What provides material in support of the operation and maintenance of aeronautical equipment?
NAVSUP
What is the Controlled Equipage Custody Record form number?
NAVSUP 306
Which NAVSUP publication contains detailed flight packet information?
NAVSUP P-485
Which publication should be consulted for proper application of project codes to MAFs?
NAVSUP P-485
Per which reference are Source, Maintenance and Recoverability (SM&R) code change recommendations submitted?
NAVSUP P-719
What tester is an off-line, general-purpose test system designed to check-out and isolate faults in electronic plug-in assemblies, modules, and printed of circuit boards?
NELAT
what markings provide guidance on how to use walkways on a/c wings and stabilizers as well as on the fuselage?
NO STEP
Each Navy item stocked under centralized inventory control has an assigned what?
NSN
What prepares tables showing the safe current ratings for sizes and types of conductors covered with various types of insulation?
National Board of Fire Underwriters
Which system significantly reduces the administrative burden and produces up to date status information necessary for the control of maintenance?
Naval Aviation Logistics Command Management Information System (NALCOMIS)
Which program establishes policy, responsibilities and requirements for reporting substandard workmanship, improper QA procedures and deficiencies in material and publications?
Naval Aviation Maintenance Discrepancy Reporting Program (NAMDRP)
What is the central distribution manager for all COMNAVAIRSYSCOM technical publications and the central clearinghouse for COMNAVAIRSYSCOM's Technical Publications Deficiency Report (TPDR) Program?
Naval Aviation Technical Data and Engineering Services Command/Center (NATEC)
What provides a standardized Department of the Navy flight activity data collection system?
Naval Flight Record Subsystems (NAVFLIRS)
Which command is responsible for providing the necessary planning, programming and budgeting for manpower and training resources to support fleet training requirements?
Naval Personnel Development Command (NPDC)
Which automated system was designed to be responsive to demands for training information by the Naval Educational Training Command (NETC) as wells as other commands?
Navy Integrated Training Resources and Administration System (NITRAS)
Which program establishes policy, responsibilities, and requirements for monitoring equipment condition in an effort to detect impending failures without equipment removal or extensive disassembly?
Navy Oil Analysis Program (NOAP)
What is the maximum acceptable hydraulic fluid particulate contamination level for SE?
Navy Standard Class 3
What is the maximum acceptable hydraulic fluid particulate contamination level for a/c?
Navy Standard Class 5
what refers to the part, component, or system in which the requisitioned part is used?
Next higher assembly
Finely polished glass, glazed ceramic, and oxidized silicon have been used as substrate materials for thin films. A number of materials, including nichrome, a compound of silicon oxide and chromium cermets, tantalum, and titanium, have been used for thin film resistors. What is the most used?
Nichrome
What part numbers cannot be directly related to an applicable NSN without the use of additional information?
Nondefinitive
Which type of charge is a routine charge that is given in accordance with the nameplate data during the ordinary cycle of operation to restore the battery to its charged condition?
Normal
What must a/c reported as during all periods of time when it is not available for a mission because of scheduled maintenance?
Not Mission Capable (NMC)
Activities at which maintenance level do no perform independent major inspections on non-reciprocation engines?
O-level
What is the U.S. Government Motor Vehicle Operator's Identification Card form number?
OF-346
What are the main users and operators of naval a/c?
OMAs
What form is maintained on the VIDS board cardex or filing container held by the work center responsible for performing preoperational inspections?
OPNAV 1790/52
What in the a/c logbook is generated by the squadron and is used to monitor structural life limited components designated for depot replacement that do not require scheduled removal component (SRC) or assembly service record (ASR) documentation?
OPNAV 4790/142
What form provides a means of recording all scheduled and conditional inspections performed on an a/c during each period and on equipment for which an AESR is required?
OPNAV 4790/22A
What section of the a/c logbook contains a record of all explosive devices installed in the a/c and/or major assemblies?
OPNAV 4790/26A
What form is used to maintain a current inventory of all equipment, components, and assemblies requiring an MSR, ASR, EHR, or SRC card as directed by the Periodic Maintenance Information Cards for the Aircraft?
OPNAV 4790/27A
What form is used to record acceptance information, custody and transfer, rework, preservation and despreservation and TDs?
OPNAV 4790/51
What is used to schedule and record all corrosion maintenance actions?
OPNAV 4790/51
What form documents maintenance actions involving failed material?
OPNAV 4790/60
All routine technical publication deficiencies are reported on what form?
OPNAV 4790/66
Which instruction contains general procedures and basic policies for recovery,, reclamation and transfer of crash damages a/c?
OPNAVINST 3750.6
Which instruction contains instructions for maintenance personnel participation in command aviation safety programs?
OPNAVINST 3750.6
Which instruction specifies naval aviation mishap reporting procedures, and requires maintenance personnel to participate in investigating, reporting and preventing ground mishaps?
OPNAVINST 3750.6
According to what instructions, QARs should attend a Fleet Aviation Specialized Operational Training Group Detachment QA course?
OPNAVINST 4790.2
The aircraft maintenance department supports naval operations by the upkeep of a/c and associated SE to the assigned level of maintenance. This support is accomplished by complying with what instruction?
OPNAVINST 4790.2
The first two characters of the TD codes are listed in an appendix to what instruction?
OPNAVINST 4790.2
You should refer to what instruction for the format and content of the message and the procedures for filling out OPNAV 4790/66?
OPNAVINST 4790.2
Which instruction provides guidelines for Hazardous Material (HAZMAT) disposal?
OPNAVINST 5090.1
OPNAVINST 5100.23 along with which other instruction contain safety precautions that require implementation by maintenance personnel on assigned equipment and spaces?
OPNAVINST 5100.19
What contains safety precautions to be followed while aboard ship?
OPNAVINST 5100.19
OPNAVINST 5100.19 along with which other instruction outline the Navy's Hazardous Material Information Resource System (HMIRS) operations and provide access information?
OPNAVINST 5100.23
The hearing conservation program is outlined in what instruction?
OPNAVINST 5100.23
Which instruction provides policies and guidelines for administration of the NAVOSH program Navywide?
OPNAVINST 5100.23
For information of EOC codes and levels of a/c or equipment mission capability, refer to what instruction?
OPNAVINST 5442.4
Which instruction contains maintenance functions, policy and responsibilities for armament equipment?
OPNAVINST 8000.16
Which Naval instruction establishes the Explosives Handling Personnel Qualification and Certification Program which personnel in the Aviation Life Support Systems (ALSS) Branch must be qualified in?
OPNAVINST 8023.24
What can be used to check a varactor diode in a circuit?
Ohmmeter
What device is widely used to measure resistance and check the continuity of electrical circuits and devices?
Ohmmeter
What are used to measure resistance and to check continuity?
Ohmmeters
Which law states that current is directly proportional to the applied voltage?
Ohms Law
How is voltmeter sensitivity expressed?
Ohms per volt
Which main component of a circuit breaker provides a means of opening and closing the breaker contacts (turning, the circuit ON and OFF)?
Operating mechanism
Technical manuals are divided into two major types; What are they?
Operational and Maintenance
What department carries out the unit's mission of flight operations by naval a/c?
Operations
At which level are QA stamps to be used by QARs and CDQARs only?
Organizational
Which unit of measurement are torque synchro measurements in?
Ounce-inches
Moving-disk frequency meters are most commonly what type of meters?
Out-of-circuit
Which type of meter can be used wherever you wish to connect it?
Out-of-circuit
What contain high usage, low cost, maintenance-related materials, such as nuts, bolts, gaskets, O-rings, switches, abrasive, and glues?
PEBs
Aircraft structural life limitations are specified in the what?
PMIC
For specific a/c, you should refer to what to locate corrosion-prone areas for that a/c?
PMICs
Which type of devices is obtained when a section of N-type semiconductor material is joined with a similar section of P-type semiconductor material?
PN Junction
What offers very little resistance to current flow in the forward-bias direction but maximum resistance to current flow when reverse biased?
PN junction diode
What indicates the maximum reverse-bias voltage that may be applied to a diode without causing junction breakdown?
PRV
What is a six-character, numeric code that is assigned to each a/c reporting custodian for identification?
PUC
What is intended to protect equipment or components against corrosion, deterioration and physical damage during transportation and storage?
Packaging
What serves as a satisfactory insulation for extremely high-voltage cables when it is impregnated with a high grade of mineral oil?
Paper
Which record was designed to provide the current configuration and inspection record of a parachute assembly and its components?
Parachute Record (OPNAV 4790/101)
Alternators are connected in what way to increase the output capacity of a system beyond that of a single unit, serve as additional reserve power for expected demands, or permit shutting down one machine and cutting in a standby machine without interrupting power distribution?
Parallel
Connecting an ammeter in what way would give you not only an incorrect measurement, it would also damage the ammeter, because too much current would pass through the meter?
Parallel
Higher current capacity can be achieved by connecting cells in what way?
Parallel
How are voltmeters always connected?
Parallel
What way are capacitors connected when one plate of each capacitor is connected directly to one terminal of the source, while the other plate of each capacitor is connected to the other terminal of the source?
Parallel
What way must voltmeter always be connected?
Parallel
What is the time required to complete one cycle of a waveform called?
Period
What is a list of all known elements with the number of electrons in each atom contained?
Periodic table of elements
Which type of magnets are made from substances, such as hardened steel and certain alloys which retain a great deal of their magnetism?
Permanent
Which substance quality determines the ease with which it can be magnetized?
Permeability
Which program is a compilation of written requirements for as specific watch station or unit team member?
Personnel Qualification Standards (PQS)
What are two things that are in step, going through a cycle together, falling together and rising together said to be in?
Phase
What identify scheduled or forced removal items and their replacement intervals?
Phase MRCs
What is a light-controlled variable resistor?
Photodiode
Which type of device operates on the photoelectric principle?
Photoelectric cell
The Printed Circuit Board (pcb) is usually an epoxy board on which the circuit leads have been added by what process?
Photoetching
Which type of device converts light energy into electrical energy?
Photovoltaic cell
What is a form of extremely localized attack that results in holes in the metal?
Pitting
What branch of the line division normally has between 75 to 95% of the total personnel assigned to the line division?
Plane captain
Which publications provide a basis for planning, scheduling and complying with scheduled maintenance requirements?
Planned Maintenance System (PMS)
Which system formally ensures that aeronautical equipment is maintained throughout its life cycle by controlling degradation resulting from time, operational cycles, use or climatic exposure?
Planned Maintenance System (PMS)
Which type of sealants are called "one-part" sealants and are ready for use as packaged?
Pliable
Which type of fuse is constructed so that it can be screwed into a socket mounted on a control panel or electrical distribution center?
Plug-type
Servo systems are either electromechanical, electro-hydraulic, hydraulic, or what else?
Pneumatic
What tool is sued to adjust contact spacing of a relay?
Point bender
What were the very first transistors known as?
Point-contact
What could be designed to work within the ultra-high frequencies used in radar, whereas the electron tube could not?
Point-contact semiconductor diode
The output frequency of alternator voltage depends upon the speed of rotation of the rotor and they number of what?
Poles
Since an electron in an atom has both mass and motion, it contains two types of energy. By virtue of its motion the electron contains kinetic energy. Due to its position it also contains what other type of energy?
Potential
Which type of energy is contained by an object due to its position?
Potential
What are the two types of variable resistors?
Potentiometer and Rheostat
Which type of compounds are used to encase a part of component, such as in an electrical connector?
Potting
When is corrosion products form, they often precipitate onto the corroding surface as a what?
Powdery deposit
Which number (represented as a decimal or a percentage) represents the portion of the apparent power dissipated in a circuit?
Power factor
What are reciprocating engines, jet propulsion engines, jet propulsion/ turboshaft engines, rocket-type jet engines and Auxiliary Power Units?
Power plants
What indicates the rate at which devices convert electrical energy into another form of energy?
Power rating
What are used to supply voltages to the various circuits in electrical equipment?
Power transformers
What are used after SE cleaning before ocean assignment when an extended period of SE storage is anticipated?
Preservatives
Spray guns are usually classed as either a suction-feed or what-feed type?
Pressure
Which type of cell is one in which the chemical action eats away one of the electrodes?
Primary
All generators, large and small, AC and DC, require a source of mechanical power to turn their rotors. What is this source of mechanical energy called?
Prime mover
What is the device that provides the turning force applied to the armature called?
Prime mover
The MMP is published by the AIMD/IMA for use by what divisions?
Production
The person with the most direct concern for quality workmanship is the what?
Production Supervisor
What indicate which Maintenance Requirement Cards are to be complied with, the numbers and specialties of personnel required, times during which the separate jobs are scheduled for completion, power/air off or on conditions required during the work, and the area where the work is to be performed?
Sequence Control Cards
In what way must ammeters always be connected with the circuit under test?
Series
Induction, Synchronous, along with what else are the three basic type of AC motors?
Series
The overall effect of connecting capacitors in what way is to move the plates of the capacitors further apart?
Series
Which type of circuit contains only one path for current flow?
Series
Which type of motors cannot be used where a relatively constant speed is required under conditions of varying load?
Series
What are emf sources that would tend to force current in opposite directions said to be?
Series opposing
Basic voltage regulators are classified as one of what two ways?
Series or Shunt
Self-excited generators are classed according to the type of field connection they use. What are the three general type of field connections?
Series, Shunt, and Compound
What type of generator is rarely used in everyday practice?
Series-wound
What is the angle called through which a transmitter rotor is mechanically rotated?
Signal
What are the two widely used checks in testing electronic equipment?
Signal tracing and Visual
Germanium along with what else are the two common semiconductors used in solid-state devices?
Silicon
What is the best conductor?
Silver
Which type of material is used as a plating material over copper in waveguides, miniature and micro-miniature circuits, wires, contacts high frequency cavities, tank circuits and RF shielding?
Silver
Lead-acid, nickel-cadmium, silver-zinc, along with what else are the four basic type of wet cells?
Silver-cadmium
Which type of cell has more than twice the shelf life of the silver-zinc cell and can be recharged many more times?
Silver-cadmium
Which type of cell has more is extensively used to power emergency equipment?
Silver-zinc
Which type of generator produces a single, continuously alternating voltage?
Single-phase
What is the least expensive, lowest maintenance type of AC motor?
Single-phase AC induction
What is a metal alloy used to join two or more metals with a metallic bond?
Solder
What measures the ease with which molten solder wets the surface of the metals being joined?
Solderability
what is used for cleaning and removing contaminants (oil,grease,dirt, and so forth) from the soldered connection?
Solvent
What are liquids that dissolve other substances?
Solvents
What audits provide a systematic, coordinated method of investigating known deficiencies, evaluating the quality of workmanship, and determining the adequacy of and adherence to technical publications and instructions?
Special
What is work done to a/c, a/c equipment and a/c SE to improve or change their capability to perform specific units and a/c SE activities?
Special rework
What maintenance includes replacement, removal, addition, alteration, or repair of parts, equipment, or a/c without regard to flying hours or operating times, and is also known as unscheduled maintenance?
Special upkeep
What is the ratio of the weight of a certain amount of a given substance compared to the weight of the same amount of pure water called?
Specific gravity
What is the resistance in ohms offered by a unit volume (the circular-mil-foot or the centimeter cube) of a substance to the flow of electric current?
Specific resistance
What must be used when conductors join each other or connect to a load
Splices or terminals
Which splice is extensively used to join large conductors?
Split bolt
Which type of motors are designed to use inductance, capacitance, or resistance to develop a starting torque?
Split-phase
Which unit of measurement is used to determine the cross-sectional area of a square or rectangular conductor?
Square mil
Which type of relationship exists between an advisory staff supervisor and a production line supervisor?
Staff
Which type of metals are most susceptible to pitting damage?
Stainless steel
Which type of metals are used for gears, bearings and high strength bolts, and for mountings, racks, brackets and hardware in avionic systems?
Stainless steels
What is a low voltage used in multi-speed synchro systems that contain CTs to prevent false synchronization?
Stickoff voltage
Which type of conductor is composed of a group of wires or of any combination of groups of wires?
Stranded
What is used to improve the quality and accuracy of technical manuals?
TPDR
What serves as a centralized source of up-to-date information for all mechanics and technicians and gives all personnel an excellent source of reference material to help with personal training and individual improvement?
TPL
Which program establishes policy, procedures and responsibilities for the timely and accurate incorporation of Technical Directives (TDs)?
Technical Directive Compliance Program
Which system provides online configuration status accounting for naval a/c, engines, SE, maintenance trainers and serial numbered weapon system components?
Technical Directive Status Accounting (TDSA)
Which form contains a record of Technical Directives (TDs) affecting the airframe structure and its integral parts?
Technical Directives (CNAF 4790/24A)
Which central repository is the authoritative source for central Technical Publications Libraries (CTPLs) to validate the most current copies of technical manuals and associated records maintained in individual command Enhanced Library Management System (ELMS) accounts?
Technical Manual Application System (TMAPS)
What is the amount of change of resistance per unit change in temperature known as?
Temperature coefficient
What is the requirement of the current in an inductor to increase to 63.2 percent of the maximum current or to decrease to 36.8 percent of the maximum current known as?
Time constant
Circuit breakers, like fuses, are rated by the amount of what?
Time delay
Which material has the best combination of solder ability and corrosion resistance of any metallic coating?
Tin
Ordinary soft solder is a fusible alloy consisting chiefly of what?
Tin and lead
The solder most commonly used in electronic assemblies is an alloy of what?
Tin and lead
Which program establishes policy, responsibilities and requirements for implementing procedures for maintaining and storing a/c, SE and Armament Weapons Support Equipment (AWSE) tires and wheels in all Navy and Marine Corps aviation activities?
Tire and Wheel Maintenance Safety Program
Which concept was developed to reduce the administrative burden of processing Tool Control Manual (TCM) changes/deviations through multiple wings, expedite handling, and use the expertise of on-site managers?
Tool Control Model Manager
Which program establishes policy and responsibilities for implementing, maintaining, controlling, storing, replacing and inventorying common hand tools?
Tool Control Program
Who is responsible for shift change and semi-annual inventories of tools assigned to the tool room?
Tool Room Supervisor
What is a measure of how much load a machine can turn?
Torque
What are the two general classifications of synchro systems?
Torque and Control
Which system is the single authoritative source for manpower data?
Total Force Manpower Management System (TFMMS)
Which type of simple system should the synchro capacitor never be used in?
Transmitter-receiver
The advent of long-range missiles and high-speed a/c has brought about the need for accurately transmitting very large quantities. This is best done by what type of synchro system?
Tri-speed
What is a nonflammable degreasing agent for cleaning oxygen systems equipment?
Trichlorethane
What is a general cleaner for avionic and electrical systems?
Trichlorotrifluoroethane
Which part of the circuit breaker senses the overload condition and causes the circuit breaker to trip or break the circuit?
Trip element
Which type of circuit breaker is a circuit breaker that will trip (open) even if the operating mechanism (ON/OFF switch) is held in the ON position?
Trip-free
What is the process of locating and repairing faults in equipment after they have occurred?
Troubeshooting
Which signal lights are used to aid maintenance personnel in locating synchro trouble quickly?
Trouble indicators
What type of terminals are used for interfacial connections on printed circuit boards, terminal points for point-to-point wiring, mounting components, and as tie points for interconnecting wiring?
Turret and bifurcated
How many numbering systems are presently in use by NAVAIR?
Two
Which type of motors are rarely used except in special-purpose equipment?
Two-phase
Which verification category is assigned to characteristics which would be classified as critical if found defective?
Type 1
Which verification category temporarily imposes mandatory verification requirements and may be conducted on high failure rate items?
Type 2
An instantaneous response to an error signal will be possible when a servo system is in what condition?
Underdamped
What increases the contact area and causes the tire to wear rapidly and unevenly at the outer edges of the tread?
Underinflation
What are the coils said to have if they are so positioned with respect to each other so that all of the flux of one coil cuts all of the turns of the other?
Unity coefficient of coupling
Which material is commonly used only in special classes of service and is made as a solid felted covering for a cable?
Unspun felted cotton
Which type of maintenance is the preventative, restorative and additive work performed on a/c, equipment and SE by operating units and a/c SE activities?
Upkeep
Which Technical Directive category is assigned when factors of combat necessity, potential hazardous conditions which could result in personal injury or damage to valuable property, or unacceptable reductions in operational readiness exist and such conditions, if uncorrected, would compromise safety or embody risks which are calculated to be acceptable within defined time/performance limits?
Urgent Action
What TDs are issued under the governing factors of combat necessity or hazardous conditions that could result in injury to personnel, damage to valuable property, or unacceptable reductions in operational efficiency?
Urgent action
What is an automatic, high-speed, computer controlled, general-purpose test set that will isolate faults to the component level?
VAST
All maintenance managers have the responsibility to manage their resources efficiently. To do this, they must maintain control of the different elements within their area of responsibility. Effective control depends upon the availability of status information on these elements. What provides this information?
VIDS
The QA inspector who actually performs the inspection of the standards of the work signs the "INSPECTED BY" block on all what?
VIDS/MAFs
What is a method used to deposit many types of materials in a highly evacuated chamber in which the material is heated by electricity?
Vacuum evaporation
The conduction band along with which other band are the two energy bands that an electron can exist in?
Valence
What is a band in which the energy level is the same as the valence electrons of the atoms?
Valence
What is an atom's ability to combine with other atoms called?
Valence
Which property of the atom is determined by the number of electrons in the outermost shell?
Valence
What is the outer shell of an atom called?
Valence shell
What is an engineering process by which the originator accomplishes all tasks required by a proposed change to ensure the modified items functions as intended?
Validation
Which type of diode behaves like a variable capacitor, with the PN junction functioning like the dielectric and plates of a common capacitor?
Varactor
Which type of motor can have its speed controlled?
Variable-speed
What is cotton cloth that has been coated with an insulating varnish known as?
Varnished cambric
Which type of servo is used in applications where the load is required to be driven at a constant speed?
Velocity
Which process is used for determining the accuracy and adequacy of a proposed TD and reporting the results to the preparing activity?
Verification
Which term refers to the determination of product conformance by actual examination, measurement, witnessing of tests, witnessing redundant or concurrent certification, or review of documented objective evidence describing product or quality characteristics and comparison to prescribed quality requirements?
Verification
which compass calibration method uses an in-flight procedure to compare headings against those generated by the onboard Intertial Navigation System?
Verification
What type of frequency meter is one of the simplest devices for indicating the frequency of an AC source?
Vibrating-reed
Which management tool provides a graphic display of vital, up to date information such as all a/c status information, flyable discrepancies, non-a/c related discrepancies and assigns a relative importance to each item?
Visual Information Display System
What is the first step for troubleshooting a solenoid?
Visual inspection
Some of the least recognized contributors to corrosion are sand, dust and what else?
Volcanic ash
Whenever a conductor is moved within a magnetic field in such a way that the conductor cuts across magnetic lines of flux, what is generated in the conductor?
Voltage
What is the most widespread use of Zener diodes?
Voltage regulators
Manuals prepared in what format are compatible to microfilm and paper media?
WP
What code normally identifies the system, subsystem, set, component and part of the end item being worked on?
WUC
What manual identifies assigned system-related equipment codes pertaining to various servicing and maintenance functions?
WUC
What is a device used to deposit materials on a substrate?
Wafer mask
What method is to be used as a last resort and only for temporary preservation prior to thorough cleaning?
Water displacing
What is a single slender rod or filament of drawn metal called?
Wire
Which type of joint is used to replace the rattail joint splice?
Wire nut
What tool is a preferred method of removing insulation?
Wire-stripping
Which type of diagram is a detailed of each circuit installation showing all of the wiring, connectors, terminal boards, and electrical or electronic components of the circuit?
Wiring
What is the loop of wire that rotates through the magnetic filed in a generator called?
armature
What format for inspections provides maintenance personnel with abbreviated requirements for turnaround and preoperational inspections?
checklist
What provides a standardized objective measurement tool to conduct audits?
computerized self evaluation checklist (CSEC)
What is a number that relates a given sound intensity to the smallest intensity that the average person can hear?
dB
How often at a minimum must the Maintenance Control Supervisor verify the status board with the various work centers?
daily
There are how many workload priorities that can be assigned to a LRCA?
four
What is produced from current flowing through a conductor?
magnetic field
What do electrical motors use to convert electrical energy into mechanical motion?
magnets
which type of deficiency is a defect that isn't likely to materially reduce the utility of a unit or product or is a departure from established standards having little bearing on the use or operation of a unit?
minor
What has a mass approximately equal to that of a proton but has no electrical charge?
neutron
What is said to exist when a voltage is applied to the primary, but no load is connected to the secondary?
no load condition
What is the most convenient and quickest way of testing a diode?
ohmmeter
What prevents solder from reacting chemically with a metal?
oxidation
The most common effect of corrosion on aluminum and magnesium alloys is called what?
pitting
Which rubber compound does not carry the "R" designator of many of its applications?
silicone
What is the best conductor of electricity?
silver
Which type of maintenance includes regular cleaning of the aircraft as well as touch-up of protective paint coatings?
surface
what must be defined as the product of force and displacement in the field of physical science?
work
what inspection is a general of a specific area of an a/c?
zonal
How many days of advance notice is required prior to sending an a/c to the AMARC for storage?
10
Within how many days must the receiving organization itemize shortages and submit a list of such shortages to the organization from which the a/c was received after receiving an a/c and discovering shortages upon receipt that are not properly recorded in the Aircraft Inventory Record (AIR)?
10
Up to what percent of the total complement can be simultaneously scheduled for Aircraft Service Period Adjustment (ASPA) evaluations for those activities with complements of over 30 a/c's?
10%
O-level activities maintaining helicopter dynamic components requiring an Aeronautical Equipment Service Record (AESR) are not required to log repetitive Nondestructive Inspections (NDIs) based on less than how many hour intervals?
100
Age Unfilled Order Listings (AUOLs) list all unfilled orders held in Defense Finance and Accounting Service (DFAS) files over how many days old which have not matched with related expenditure documents and have not been cancelled?
120
No more than how many months should elapse between the Aircraft Service Period Adjustment (ASPA) inspection and the resulting adjusted Period End Date (PED)?
18
What are all components received in the Repairable Material Section (RMS) Supply Screening Unit (SSU) from O or I level maintenance units processed through to determine whether the component is within the check, test, or repair capability of the Intermediate Maintenance Activity (IMA)
Aeronautical Material Screening Unit (AMSU)
Which program provides the required data for the effective management of SE at all levels of ac maintenance?
Aircraft Maintenance Material Readiness List (AMMRL)
What was designed to protect the material condition of a/c which are not expected to be flown for extended periods of time?
Aircraft preservation
What is a list of all aviation peculiar items authorized to be carried in stock by activities for support of a/c and missiles?
Allowance Equipage List (AEL)
Which type of defect constitutes a hazard to air worthiness and the condition is such that corrective action is required prior to release of the a/c for flight?
Critical
Which form will be used in connection with survey procedures?
Financial Liability Investigation of Property Loss (DD 200)
Who is responsible for screening engine Module Service Record (MSR), Assembly Service Record (ASR), HER or Scheduled Removal Component (SRC) card?
Logbook Clerk
Which instruction provides the standardized policy and procedures for Aviation Logistics Information Management and Support (ALIMS) operations?
MCO 2020.1
Which codes specify if a component is intended to be repaired at the O I or D level maintenance level?
Source, Maintenance and Recoverability (S,M&R)
Which reference provides guidance for shipping classified information to the Washington National Records Center?
SECNAV M-5510.30
Within how many hours of receipt must Material control turn in defective repairable Consolidated Remain in Place List (CRIPL) components?
24
Engines with major inspection intervals of 400 or more hours will have major inspections performed if what percent or less of the interval remains until the next inspection?
25%
Aircraft systems will be exercised once every how many days (+/- 3 days) using applicable Maintenance Instructions Manuals (MIMs) when they don't have specific T/M/S operational system check Maintenance Requirement Cards (MRCs)?
28
OPNAVINST 3110.11 requires an Aircraft Service Period Adjustment (ASPA) evaluation between 6 months prior to and how many months after Period End Date (PED) of each aircraft Service Period Adjustment (ASPA) aircraft to determine its general material condition relative to established induction criteria?
3
How many parts is the Navy Aeronautical Publications Index made up of?
4
Within how many months of assuming the position must the O level Material Control Supervisor attend the Financial Management for Naval Aviation Operating Target Accounting course?
6
Aircraft will require a complete transfer inspection before transferring the aircraft to another reporting custodian that were originally planned for short term transfer, but due to the operational or Test Evaluation (TE) requirements exceed how many days?
90
OPNAVINST 3110.11 requires rework induction no later than how many days after the current Period End Date (PED) when the Aircraft Service Period Adjustment (ASPA) evaluation determines that a/c general material condition satisfies rework induction criteria?
90
What is the Aircraft Inventory Record (AIR) form number?
CNAF 4790/110
Which form must be prepared prior to transfer listing all missing Aircraft Inventory Record (AIR) and Mission Essential Subsystems Matrix (MESM) related items?
CNAF 4790/112
What is the Aircraft Inspection and Acceptance Record form number?
CNAF 4790/141
What is used to record acceptance information, custody and transfer, rework, preservation and depreservation, Technical directives (TDs), and any other miscellaneous history required to accompany the Support Equipment (SE) throughout its service life?
CNAF 4790/51
What is the Standard Depot Level Maintenance Special Work Request form number?
CNAF 4790/65
Which category of Support equipment/ Armament Weapons Support Equipment/ Weapons Handling Equipment is anticipated to be used within the next 90 days?
Category A
Which category of SE/ AWSE/ WHE could possibly be used within the next 180 day?
Category B
SE falling under which preservation categories should be removed from the MRC inspection?
Category B and C
Which category of SE/ AWSE/ WHE wont be needed for extremely long periods of time as in over at least 180 days?
Category C
Which departments is responsible for providing NCTSS IT21 Optimized OMA NALCOMIS support for tenant fleet a/c and reserve squadron?
Combat Information Systems
Who is the sole authority for changes and revision of Aircraft Inventory Records (AIRs)
Commander, Naval Air Systems Command (COMNAVAIRSYSCOM)
What is defined as the overhaul, repair, check, test, certification, modification, or manufacturing of aeronautical material, mission equipment, engines, and SE?
Component Repair
What is required to determine whether the airframe , power plant, accessories and equipment are functioning per predetermined standards while subjected to the intended operating environmnent?
Functional Check Flights (FCFs)
An acceptance inspection must be performed when a reporting custodian accepts an Aircraft Transfer Order (ATO) a/c under which XRAY Action Codes?
G and R
Which form provides a record of all scheduled and conditional inspections performed on the a/c during each period and on equipment for which an Aeronautical Equipment Service Record (AESR) is required?
Inspection Record (CNAF 4790/22A)
What is responsible for internal and external preservation (prior to packing) of all components
Intermediate Maintenance Activity (IMA)
Which form is used to maintain a current inventory of all equipment, components and assemblies requiring a Module Service Record (MSR), Assembly Service Record (ASR), HEIR or Scheduled Removal Component (SRC) card?
Inventory Record (CNAF 4790/ 27A)
Which manual provides functional procurement, receipt, expenditure, inventory and financial management procedures, and some policies for all Marine Aviation Logistics Squadrons (MALS) using the shipboard Uniform Automated Data Processing System (SUADPS)/Real Time (RT) and NALCOMIS Phase 2 and beyond?
MCO P 4400.177
Who is responsible for determining when an a/c is required to be placed into preservation?
MO
Who will be established in I-level activities to monitor, control and apply the Maintenance Data System (MDS) within the activity?
Maintenance Database Administrator/ Analyst (MDBA/A)
Who is responsible for preparing and publishing the Monthly Maintenance Plan (MMP)
Maintenance Material Control Officer (MMCO)
Who determines when an a/c will be placed into preservation?
Maintenance Officer (MO)
Which type of defect materially reduces the use of the unit or part for its intended purpose?
Major
Which centers are the contact points within maintenance organizations where requirements for indirect material are coordinated with the Aviation Support Division (ASD)?
Material Control
Which type of defect does not materially reduces the use of the unit or part for its intended purpose?
Minor
What will be used to apply preservation for a/c not having preservation Maintenance Requirement Cards (MRCs)?
NAVAIR 15-01-500
Which publication should be referred to for a/c preservation requirements if they are not contained in the applicable preservation Maintenance Requirement Cards (MRCs) for the selected a/c?
NAVAIR 15-01-500
Which instruction should be referred to for reporting procedures for those activates with reportable engines?
NAVAIRINST 13700.15
What must be established by each ship, aviation squadron and command to record Operating Target (OPTAR) grants and the value of transactions authorized to be incurred as chargeable to the Aircraft Controlling Custodian(ACC)/ Type Commander(TYCOM) operating budget?
NAVCOMPT 2155
What is the Operating Target (OPTAR) Document Transmittal Report form number?
NAVCOMPT 2156
Which instruction contains responsibilities and procedures for establishing, maintaining and modifying the Naval Supply (NAVSUP) WSS Consolidated Remain in Place List (CRIPL) components?
OPNAVINST 4440.25
Which series contains instructions for using the material priority system and for assigning Force Activity Designators?
OPNAVINST 4614.1
Which website provides preservation and packaging requirements for specific repairable components?
P700-CNP
which record is designed to provide the current configuration and inspection record of a parachute assembly and its components?
Parachute Record (OPNAV 4790/101)
Which maintenance concept divides the total scheduled maintenance requirements into small packages or phases that are accomplished sequentially at specified intervals?
Phase
An entry in which form is required whenever preservation, represervation or depreservation is performed on a/c or equipment
Preservation/Depreservation Record (OPNAV 4790/136A)
What performs maintenance of logs and records and Configuration Management (CM) Auto Log Set (ALS)?
Production Control
Which form contains a complete record of all repair, reconditioning, standard rework, conversion, modification, modernization and Aircraft Service Period Adjustment (ASPA) inspections performed on the a/c by a repair activity or on the equipment by any I-level or D-level activity?
Repair/Rework Record (CNAF 4790/23A)
Who is responsible for the management of all aspects of the maintenance data system (MDS) to include NALCOMIS reports and inquiries at the activity level?
System Administrator/ Analysis (SA/A)
How often must the Summary Filled Order/ Expenditure Difference Listing (SFOEDL) be forwarded by the Defense Finance and Accounting Service (DFAS) to individual Operating Target (OPTAR) holders for each Operating Target (OPTAR) held?
monthly
