AutoCAD CH 1-11
In paper space, the typical plot scale is:
1:1
You are rotating an object from 45° degrees to 30° degrees, you have entered the reference option. The reference angle will be
45°
How many layers can you create in AutoCAD:
As many as you like
Polar Tracking can be set to track
At any angle
The numbers on the coordinate display show positions in a
Cartesian coordinate system
Which linetype is loaded by default:
Continuous
In the MOVE command, after defining a selection set
Define a displacement vector
To initiate a single point object snap:
Enter an object snap mode when AutoCAD prompts for point selection
A block table has attribute fields that can be updated.
False
By default, dimension style units are the same as drawing units.
False
Center-justified text and middle-justified text are two names for the same thing.
False
External references are updated automatically when the referenced drawing changes.
False
Fonts are created based on text styles.
False
In order to define an arc, you must first specify a start point.
False
In the Stretch grip edit mode and the STRETCH command it is necessary to select objects with a crossing window.
False
It is necessary to match layers and color numbers
False
It is not possible to plot a landscape oriented plot on a printer.
False
It is usually unnecessary to perform a full plot preview.
False
Last and Previous selections are equivalent
False
Like incremental snap, object snap will not interfere with ordinary point selection.
False
Mtext is drawn within a rectangular box defined by the user.
False
Polar arrays can defined around circles or arcs.
False
Spline curves touch each point you pick.
False
Start point, width, and rotation angle values must be specified before entering text?
False
The # sign indicates that you are going to enter polar coordinates.
False
The Action Recorder duplicates the function of the ARRAY command.
False
The Ribbon gives quick access to all AutoCAD commands.
False
The command line is the best place to enter AutoCAD commands.
False
The continuous linetype is always available once added to the drawing.
False
The default dimension style is annotative.
False
The same selection methods are available in noun/verb and verb/noun editing.
False
To define a polar array, AutoCAD needs an angle to fill, a number of items, and angle between the items.
False
To re-define a block as separate entities you must return to the block definition.
False
When drawing a polyline using the close option will have the same effect as using an endpoint object snap to snap back to the first point.
False
You can only drawing in one color on one layer.
False
You can zoom but not pan with the scroll wheel.
False
You picked the freeze/thaw icon which caused this, when you return to your drawing you find that some objects are no longer visible.
False
This tool does not appear on the Quick Access Toolbar
Help
AutoCAD's default color system is:
Index
Which of the five settings that would typically be included in a template drawing is not listed below?
Line
An acquired point will be:
Marked with a small orange cross
To open a crossing window:
Pick points right to left
Which of these will not open the drafting settings dialog box:
Pick the drafting settings tool from the ribbon
To remove grips
Press <Esc>
To access the grip edit short cut menu
Right click after selecting objects
To access the object snap short cut menu:
Right-click when AutoCAD prompts for point selection
To facilitate creating new drawings from a previous drawing
Save it in the Template folder
To switch from decimal to architectural units:
Select architectural in the Drawing Units dialog box.
Which of these is the least useful snap and grid setting combination:
Snap = 1.0, grid = .5
The default dimension style is called:
Standard
Which of the following is always specified in defining an arc?
Start point
Which of these is not required to define a polar array?
Start point
Two modes of the coordinate display:
Static, dynamic, polar
The Continue option will begin an arc
Tangent to the last arc drawn
Which is not entered when you create single-line text:
Text color
Any drawing may be saved as a template drawing.
True
AutoCAD layouts are always created in paper space.
True
AutoCAD will not send a plot to a printer or plotter if the drawing limits exceed the sheet size.
True
Base points are included in block definitions, insertion points in block references.
True
By default the COPY command creates multiple copies of selected objects
True
C is an alias for CIRCLE.
True
Fields can be updated each time a file is opened.
True
Geometric and dimensional constraints are maintained when an object is edited.
True
In AutoCAD plot settings are affected by your choice of a plotter.
True
In using the TRIM command trimmed objects may also serve as cutting edges.
True
Linetypes need to be loaded, but colors do not.
True
Objects can be scaled from different base points with different results.
True
Objects on the same layer need not be the same color.
True
Parameter, actions, constraints, and block tables are added to dynamic blocks in the block editor contextual tab.
True
Pick a new layer from the Layer list on the ribbon, pick a new layer in the Layer Properties Manager and pick the Set Current button, pick the Make Object's Layer Current tool from the ribbon and pick an object on the new current layer are three ways to change the current layer.
True
Polylines, donuts, splines, and polygons can all be edited with PEDIT.
True
Revision clouds can be drawn free-hand or created from previously drawn objects.
True
Rows are horizontal, columns are vertical.
True
Snap makes some points impossible to select with the screen cursor.
True
The direction of 3 o'clock = 0°.
True
The right mouse button calls up shortcut menus according to context.
True
To access other linetypes you must load them from the ACAD linetype file, or another file containing linetype definitions.
True
In Grip editing, you can select objects by
Typing L for last
To move the origin point of a drawing use the:
UCS command
To coordinate layout scales with viewport scales use:
Zoom XP
Which of the following cannot be hatched using the HATCH command?
a 355° arc
To enter single line text you must first enter all of these except :
alignment
Blocks are inserted xrefs are:
attached
Which of these cannot be found in the AutoCAD DesignCenter:
block tables
Which of these cannot be given width using PEDIT:
circle
A polygon can be drawn around the outside of a circle using which option:
circumscribed
Which of these cannot be accomplished using the layer drop-down list:
create new layers
The set of visual aids and command options that move with the crosshairs is called
dynamic input display
To enter multiline text, pick the multiline text tool and then:
enter two points
AutoCAD borders and title blocks can be found :
in the template folder
Which of the following does not adjust when an object with associative dimensions is moved:
multileader text
When drawing a circle using the diameter option, the rubber band
stretches from the center point to a point outside the circle
Polyline arcs are drawn:
tangent to the last polyline drawn
TEXTEDIT can be used to change:
text content
MATCHPROP cannot be used to match:
text height
Dimension units are set in:
the Dimension Style dialog box
If a base point is not defined in an inserted drawing, the base will be:
the origin point
In model space objects are drawn:
to real world measurements(Full Scale)
Dimensional constraints cannot be added:
using AutoConstrain
Geometric constraints cannot be added :
using PEDIT
