Ch. 4

Pataasin ang iyong marka sa homework at exams ngayon gamit ang Quizwiz!

Frame

What PDU is received by the physical layer for encoding and transmission?

Cancellation

What is a characteristic of UTP cabling?

Wireless

Which media uses patterns of microwaves to represent bits?

Coaxial

Which of the following attaches antennas to wireless devices? It can also be bundled with fiber-optic cabling for two-way data transmission.

The end-user device needs mobility when connecting to the network.

A network administrator is designing a new network infrastructure that includes both wired and wireless connectivity. Under which situation would a wireless connection be recommended?

Physical Layer

A network administrator is troubleshooting connectivity issues on a server. Using a tester, the administrator notices that the signals generated by the server NIC are distorted and not usable. In which layer of the OSI model is the error categorized?

The microwave oven

A wireless LAN is being deployed inside the new one room office that is occupied by the park ranger. The office is located at the highest part of the national park. After network testing is complete, the technicians report that the wireless LAN signal is occasionally affected by some type of interference. What is a possible cause of the signal distortion?

Data Link

The physical layer of the receiving device passes bits up to which higher level layer?

False

True or false? The physical layer is only concerned with wired network connections.

False

True or false? When a frame is encoded by the physical layer, all bits are sent over the media at the same time.

False

True or false. Wireless LANs operate in full-duplex allowing all devices to send or receive data at the same time so the number of users does not impact performance.

Multimode

Which of the following fiber-optic cable types use light emitting diodes (LEDs) as a data light source transmitter?

UTP

Which of the following is the most common network media?

Coaxial

Which of the following terminates with BNC, N type and F type connectors?

ZigBee

Which of the following wireless standards is best suited for industrial and IoT environments?

Bluetooth

Which of the following wireless standards is used for Personal Area Networks (PANs) and allows devices to communicate over distances of 1 to 100 meters?

Throughput

Which of these is a measure of the transfer of bits across the media?

Bandwidth

Which of these is the name for the capacity of a medium to carry data?

Twisting opposing circuit wire pairs together

Which procedure is used to reduce the effect of crosstalk in copper cables?

IEEE

Which standards organization oversees development of wireless LAN standards?

It converts bits into a predefined code in order to provide a predictable pattern to help distinguish data bits from control bits.

Which statement correctly describes frame encoding?

Straight-Through

Which type of UTP cable is used to connect a PC to a switch port?

They allow for full-duplex connectivity.

Why are two strands of fiber used for a single fiber optic connection?

the measure of the bits transferred across the media over a given period of time

What is indicated by the term throughput?

It is able to carry signals much farther than copper cabling.

What is one advantage of using fiber optic cabling rather than copper cabling?

The amount of data that can flow from one place to another in given amount of time.

What is the definition of bandwidth?

Transmitting bits across the local media

What is the purpose of the OSI physical layer?

Rollover

What type of cable is used to connect a workstation serial port to a Cisco router console port?

False

True or false. Wireless is not well suited for enterprise networks.

the distortion of the transmitted messages from signals carried in adjacent wires

Which characteristic describes crosstalk?

Copper

Which media uses electrical pulses to represent bits?

Fiber-Optic

Which media uses patterns of light to represent bits?

STP

Which of the following counters EMI and RFI by using shielding techniques and special connectors?

Multimode

Which of the following fiber-optic cable types can help data travel approximately 500 meters?

Single-Mode

Which of the following fiber-optic cable types can travel approximately 100 km?

Single-Mode

Which of the following fiber-optic cable types is used to connect long-distance telephony and cable TV applications?

Multimode

Which of the following fiber-optic cable types is used within a campus network?

Single-Mode

Which of the following fiber-optic cable types use lasers in a single stream as a data light source transmitter?


Kaugnay na mga set ng pag-aaral

Spanish 4 Quiz: Prueba de las conjunciones

View Set

SOWK Final Exam Study Guide (true/false)

View Set

VA License Law - State Topic Tester

View Set

Psych 2314 Final Exam (Ch. 1,3,4,5,6,7,9,10,11)

View Set

Intro Into Theater: Shakespeare Quiz

View Set

Chapter 6 Mastering A and P Part 1

View Set