Chapter 3 Test Review
Electrical receptacles should be at least ___________ above floor level to reduce the risk of igniting spilled fuel vapors or other flammable liquids.
3 feet
The maximum OSHA permissible exposure limit (PEL) for carbon monoxide is ________ parts per million (ppm) of air for an 8-hour period.
50
Section ____ of an MSDS includes the heading "Accidental Release Measures."
6
Ear protection should be worn when sound levels exceed ___ decibels, when you are working around operating machinery for any period of time, or when the equipment you are using produces loud noise.
85
When handling ________________, you should always wear a full face shield.
All of the answers listed
Which of the following can be inspected during a shop safety inspection?
All of the answers listed
Which of the following is typical information found on a material safety data sheet (MSDS)?
All of the answers listed
Which of the following topics is found in Section 5 of an MSDS?
All of the answers listed
Which of the following topics is typically covered in Section 2 of an MSDS?
All of the answers listed
Which of the following types of exposure is typically covered in Section 2 of an MSDS?
All of the answers listed
hen draining fuel from a vehicle, which of the following guidelines should be followed?
All of the listed answers should be followed
A ring or watch could _____________.
All of these
A risk analysis of a bench grinder would identify the following hazards and risks:
All of these
All automotive shop activities will need to comply with EPA laws and regulations by __________________.
All of these
Before lifting anything, you can reduce the risk of injury by __________.
All of these
The proper footwear provides protection against items falling on your feet, as well as _____.
All of these
Which of the following is the correct pictogram for a Class C fire extinguisher?
Blue circle
Technician A says "Toxicological Information" can be found in Section 11 of an MSDS. Technician B says "Physical and Chemical Properties" can be found in Section 9 of an MSDS. Who is correct?
Both Technician A and Technician B
Technician A says always check the shop for damaged or missing safety signage. Technician B says always check for tripping hazards and missing fire extinguishers. Who is correct?
Both Technician A and Technician B
Technician A says always wear your hair according to the policy and procedures of your workshop. Technician B says to use hairnets, caps, or elastic bands as required for each activity. Who is correct?
Both Technician A and Technician B
Technician A says headgear includes items like hairnets, caps, and hard hats. Technician B says headgear helps protect you from getting your hair caught in rotating machinery and protect your head from knocks or bumps. Who is correct?
Both Technician A and Technician B
Technician A says it is important to have more than one evacuation route in case any single route is blocked during the emergency. Technician B says that often the evacuation routes will be marked with colored lines painted on the floors. Who is correct?
Both Technician A and Technician B
Technician A says that exposure to solvents may have long-term effects. Technician B says that accidents are almost always avoidable. Who is correct?
Both Technician A and Technician B
Technician A says trash and liquid spills should be quickly cleaned up. Technician B says tools need to be cleaned and put away after use. Who is correct?
Both Technician A and Technician B
While discussing the possibility of an accident occurring, Technician A says fires and explosions are a constant hazard wherever there are flammable fuels. Technician B says poor lifting and handling techniques can cause chronic strain injuries, particularly to your back. Who is correct?
Both Technician A and Technician B
There are three signal words: ________, ________, and ________.
Danger; warning; caution
Coming into frequent or prolonged contact with used engine oil can cause ________ and other skin disorders, including some forms of cancer.
Dermatitis
Class C fires involve_____________.
Electrical equipment
Your shop should have a(n) ________ that clearly identifies the evacuation routes.
Evacuation procedure
_______ are used to flush the eye with clean water or sterile liquid in the event that you get foreign liquid or particles in your eye.
Eye wash stations
All flammable items should be kept in an approved ________ or cabinet, with firefighting equipment close at hand.
Fireproof storage container
A ________ gets rid of exhaust gases with a suction hose that fits over the vehicle's exhaust pipe.
Gas extraction hose
Which of the following is the correct pictogram for a Class A extinguisher?
Green triangle
_________ with anti-slip coatings can be applied to the edge of step treads to reduce the hazard of tripping or falling.
High-visibility strips
Which of the following is NOT a question you should ask yourself as you prepare to be as safe as possible?
How can I finish this task as fast as possible?
Which of the following bulb types presents an extreme fire hazard if broken in the presence of flammable vapors or liquids?
Incandescent bulbs
Which of the following is NOT a source of toxic dust from a vehicle?
Internal engine components
_____ refers to items of safety equipment like safety footwear, gloves, clothing, protective eyewear, and hearing protection.
Personal protective equipment (PPE)
A ________ is a list of the steps required to get the same result each time a task or activity is performed.
Procedure
The acronym for fire extinguisher use is PASS, which stands for Pull, Aim, __________, and Sweep.
Squeeze
Technician A says barrier cream provides extra protection from chemicals and oils. Technician B says standard moisturizer can be used like barrier cream. Who is correct?
Technician A
Technician A says that after an accident you should take measures to avoid it in the future. Technician B says that it is OK to block an exit for a shop. Who is correct?
Technician A
Technician A says "Stability and Reactivity" can be found in Section 13 of an MSDS. Technician B says "Ecological Information" can be found in Section 12 of an MSDS. Who is correct?
Technician B
Technician A says a safe work environment would NOT include a workplace orientation given by the management. Technician B says a safe work environment would contain a workplace culture that supports safe work practices. Who is correct?
Technician B
Technician A says most shops use hazardous materials on rare occasions. Technician B says coolant is an example of hazardous materials. Who is correct?
Technician B
Technician A says that dust masks should be used when painting. Technician B says that a respirator has removable cartridges that can be changed according to the type of contaminant being filtered. Who is correct?
Technician B
Technician A says ventilation can always be provided entirely by natural means, such as by opening doors and windows to provide airflow for low-exposure situations. Technician B says parts cleaning areas or areas where solvents and chemicals are used may require additional exhaust hoods or fans to be installed to remove dangerous fumes. Who is correct?
Technician B
While discussing the danger of taking shortcuts during heavy vehicle service and repair, Technician A says that if you are an experienced technician, it is permissible to take shortcuts. Technician B says that in most cases, the time saved by taking a shortcut is nothing compared to the time spent recovering from an accident. Who is correct?
Technician B
Technician A says you should not use a soap and water solution to clean up dust after a repair. Technician B says you should not use a low-pressure aerosol brake cleaning solution to clean up dust after repairs. Who is correct?
Technician B *this question is keyed wrong*
A droplight that does not allow any electrical parts to come in contact with the outer casing of the device is called a:
double-insulated light.
