Chapter 7 Process Strategies

68. Which of the following is not one of the essential ingredients for mass customization? a. high machine utilizations b. personnel and facility flexibility c. reliance on modular design d. rapid throughput e. very effective scheduling

a (Four process strategies, moderate)

47. Process A has fixed costs of $1000 and variable costs of $5 per unit. Process B has fixed costs of $500 and variable costs of $15 per unit. The crossover point between process A and process B is a. 50 units b. 200 units c. $2,500 d. $5,000 e. $9,500

a (Four process strategies, moderate) {AACSB: Analytic Skills}

54. A drawing of the movement of material, product, or people is a a. flow diagram b. process chart c. service blueprint d. process map e. none of the above

a (Process analysis and design, moderate)

61. The use of information technology to monitor and control a physical process is known as a. process control b. computer-aided design c. information numeric control d. numeric control e. none of the above

a (Production technology, moderate) {AACSB: Use of IT}

44. Which of the following characteristics best describes repetitive focus? a. It uses sophisticated scheduling to accommodate custom orders. b. Its output is a standardized product produced from modules. c. It is too expensive when volumes are low or flexibility is required. d. It is widely used for the manufacture of steel. e. Its costs are often known only after a job is done.

b (Four process strategies, difficult)

34. Which one of the following products is most likely made in a job shop environment? a. a daily newspaper b. paper forms c. television sets d. cigarettes e. canned vegetables

b (Four process strategies, moderate)

37. Standard Register a. has dozens of U.S. plants in its Forms Division b. groups people and machines into departments that perform specific activities c. utilizes a product strategy to keep production volume high d. obtains its low-cost advantage by not spending money on CAD systems e. obtains its low-cost advantage by specializing in a relatively small number of products

b (Four process strategies, moderate)

40. Which of the following is false regarding repetitive processes? a. They use modules. b. They allow easy switching from one product to the other. c. They are the classic assembly lines. d. They have more structure and less flexibility than a job shop layout. e. They include the assembly of basically all automobiles.

b (Four process strategies, moderate)

35. Which of the following products is likely to be assembled on a repetitive process line? a. automobiles b. personal computers c. dishwashers d. television sets e. all of the above

e (Four process strategies, moderate)

41. When done correctly, mass customization a. increases pressure on supply chain performance b. helps eliminate the guesswork that comes with sales forecasting c. drives down inventories d. increases pressure on scheduling e. all of the above

e (Four process strategies, moderate)

43. Which of the following phrases best describes process focus? a. low volume, high variety b. finished goods are usually made to a forecast and stored c. operators are modestly skilled d. high fixed costs, low variable costs e. raw material inventories are high relative to the value of the product

a (Four process strategies, difficult)

64. Computer-integrated manufacturing (CIM) includes manufacturing systems that have a. computer-aided design, a flexible manufacturing system, inventory control, warehousing and shipping integrated b. transaction processing, management information systems, and decision support systems integrated c. automated guided vehicles, robots, and process control d. robots, automated guided vehicles, and transfer equipment e. all of the above

a (Production technology, moderate) {AACSB: Use of IT}

55. Strategies for improving productivity in services are a. separation, self-service, automation, and scheduling b. lean production, strategy-driven investments, automation, and process focus c. reduce inventory, reduce waste, reduce inspection, and reduce rework d. high interaction, mass customization, service factory, and just-in-time e. none of the above

a (Service process design, moderate)

28. Which of the following statements regarding Dell Computer is false? a. Dell is a practitioner of the mass customization process. b. Dell builds its computers overseas in order to gain a low-cost advantage. c. Dell keeps very little inventory of finished goods. d. Dell utilizes a global supply chain, but assembles its computers in the U.S. e. Dell's research focuses on manufacturing issues, not computer part design.

b (Global company profile, moderate)

72. Making environmentally sound products through efficient processes a. is unprofitable, as long as recyclable materials prices are soft b. is known as lean manufacturing c. can still be profitable d. is easier for repetitive processes than for product-focused processes e. none of the above

c (Ethical and environmentally friendly processes, moderate) {AACSB: Ethical Reasoning}

74. Which of the following statements regarding ethical and environmentally friendly processes is true? a. Operations managers can be environmentally sensitive, but they must avoid following a low cost strategy. b. Processes can be environmentally friendly or socially responsible, but not both. c. Operations managers can be environmentally sensitive and still follow a low cost strategy. d. Using energy-efficient lighting saves so little that it should not be labeled environmentally friendly. e. The only business strategy consistent with ethical and environmentally sensitive management is the differentiation strategy.

c (Ethical and environmentally friendly processes, moderate) {AACSB: Ethical Reasoning}

31. Three types of processes are a. goods, services, and hybrids b. manual, automated, and service c. process focus, repetitive focus, and product focus d. modular, continuous, and technological e. input, transformation, and output

c (Four process strategies, moderate)

33. A product-focused process is commonly used to produce a. high-volume, high-variety products b. low-volume, high-variety products c. high-volume, low-variety products d. low-variety products at either high- or low-volume e. high-volume products of either high- or low-variety

c (Four process strategies, moderate)

36. An assembly line is an example of a a. product-focused process b. process-focused process c. repetitive process d. line process e. specialized process

c (Four process strategies, moderate)

38. Which of the following transformations generally has the highest equipment utilization? a. process-focused process b. repetitive process c. product-focused process d. specialized process e. modular process

c (Four process strategies, moderate)

48. Process X has fixed costs of $10,000 and variable costs of $2.40 per unit. Process Y has fixed costs of $9,000 and variable costs of $2.25 per unit. Which of the following statements is true? a. The crossover point is approximately 6667 units. b. It is impossible for one process to have both of its costs lower than those of another process. c. Process Y is cheaper than process X at all volumes. there is no crossover point. d. Process X should be selected for very large production volumes. e. Process X is more profitable than process Y and should be selected.

c (Four process strategies, moderate) {AACSB: Analytic Skills}

50. Product Focused processes a. allow more customization, but are not very efficient b. are desirable because resource needs increase slowly with the complexity of a process c. are processes that are specialized for relatively few products or customer groups d. apply only to service firms, not to manufacturers e. are profitable because customers demand flexibility, not specialization

c (Process analysis and design, moderate)

52. One fundamental difference between a process chart and a process map is that a. the process chart uses a time dimension while a process map is not time-oriented b. the process chart includes the supply chain, while the process map stays within an organization c. the process chart is more like a table, while the process map is more like a schematic diagram d. the process chart focuses on the customer and on the provider's interaction with the customer, while the process map does not deal directly with the customer e. None of these is true, because a process chart and a process map are the same thing.

c (Process analysis and design, moderate)

66. A system using an automated work cell controlled by electronic signals from a common centralized computer facility is called a(n) a. adaptive control system b. robotics c. flexible manufacturing system d. automatic guided vehicle (AGV) system e. manufacturing cell

c (Production technology, moderate) {AACSB: Use of IT}

67. "Operators simply load new programs, as necessary, to produce different products" describes a. CAD b. automated guided vehicles c. flexible manufacturing systems d. vision systems e. process control

c (Production technology, moderate) {AACSB: Use of IT}

42. Which of the following phrases best describes product focus? a. low volume, high variety b. finished goods are usually made to order c. processes are designed to perform a wide variety of activities d. high fixed costs, low variable costs e. raw material inventories are low relative to the value of the product

d (Four process strategies, difficult)

30. A job shop is an example of a(n) a. repetitive process b. continuous process c. line process d. intermittent process e. specialized process

d (Four process strategies, moderate)

39. Harley Davidson a. utilizes job shops to make each of its modules b. uses product focused manufacturing c. uses a large number of modules to build a small number of different bikes d. uses work cells to feed its assembly line e. All of the above are true.

d (Four process strategies, moderate)

45. Utilization in process-oriented facilities is frequently low because a. the postponement strategy for improving service productivity is being used b. scheduling in process-oriented facilities is not very complex c. with high fixed costs, utilization is not very important d. excess capacity for peak demands is desirable e. low raw material inventories cause machines to be idled

d (Four process strategies, moderate)

49. The crossover point is that production quantity where a. variable costs of one process equal the variable costs of another process b. fixed costs of a process are equal to its variable costs c. total costs equal total revenues for a process d. total costs for one process equal total costs for another process e. the process no longer loses money

d (Four process strategies, moderate)

60. Which of the following is true regarding vision systems? a. They are consistently accurate. b. They are modest in cost. c. They do not become bored. d. All of the above are true. e. None of the above is true.

d (Production technology, moderate) {AACSB: Use of IT}

62. Which of the following technologies would enable a cashier to scan the entire contents of a shopping cart in seconds? a. ASRS b. AGV c. CAD/CAM d. RFID e. FMS

d (Production technology, moderate) {AACSB: Use of IT}

63. "Automatic placement and withdrawal of parts and products into and from designated places in a warehouse" describes a. AGV b. CAD/CAM c. CIM d. ASRS e. FMS

d (Production technology, moderate) {AACSB: Use of IT}

65. Which one of the following technologies is used only for material handling, not actual production or assembly? a. robots b. CNC c. CAD d. AGVs e. FMS

d (Production technology, moderate) {AACSB: Use of IT}

75. Which of the following is true regarding the concept of flexibility? a. It is the ability to change production rates with little penalty in time, cost, or customer value. b. It can be accomplished with sophisticated electronic equipment. c. It may involve modular, movable, even cheap equipment. d. All of the above are true. e. None of the above is true.

d (Selection of equipment and technology, moderate)

53. Service blueprinting a. provides the basis to negotiate prices with suppliers b. mimics the way people communicate c. determines the best time for each step in the process d. focuses on the provider's interaction with the customer e. can only be successful with two-dimensional processes

d (Service process and design, moderate) {AACSB: Communication}

56. In mass service and professional service, the operations manager should focus on a. automation b. equipment maintenance c. sophisticated scheduling d. human resources e. all of the above

d (Service process design, moderate)

69. Advances in technology a. have impacted the manufacturing sector only b. have had only limited impact on services c. have failed to change the level of customer interaction with an organization d. have had dramatic impact on customer interaction with services and with products e. have dramatically changed health care, but have not changed retailing

d (Technology in services, moderate)

32. Which of the following industries is likely to have low equipment utilization? a. auto manufacturing b. commercial baking c. television manufacturing d. chemical processing e. restaurants

e (Four process strategies, moderate)

46. A quasi-custom product a. gets its apparent customization from the combinations available from a small number of modules b. is often the output of repetitive focus facilities c. is a valid description of a fast food sandwich d. is only possible when the focus strategy of service productivity improvement is in use e. All but d are true.

e (Four process strategies, moderate)

29. An organization's process strategy a. will have long-run impact on efficiency and flexibility of production b. is the same as its transformation strategy c. must meet various constraints, including cost d. is concerned with how resources are transformed into goods and services e. All of the above are true.

e (Introduction, moderate)

51. Value Stream Mapping a. is a variation on time function mapping b. examines the supply chain to determine where value is added c. extends time function mapping back to the supplier d. starts with the customer and works backwards e. All of the above are true.

e (Process analysis and design, moderate)

70. Process redesign a. is the fundamental rethinking of business processes b. can focus on any process c. tries to bring about dramatic improvements in performance d. focuses on activities that cross functional lines e. all of the above

e (Process reengineering, moderate)

59. Which of the following are typical of process control systems? a. They have sensors. b. The digitized data are analyzed by computer, which generates feedback. c. Their sensors take measurements on a periodic basis. d. The sensors' measurements are digitized. e. all of the above

e (Production technology, moderate) {AACSB: Use of IT}

73. Flexibility can be achieved with a. movable equipment b. inexpensive equipment c. sophisticated electronic equipment d. modular equipment e. all of the above

e (Selection of equipment and technology, moderate)

57. In mass service and service factory quadrants of the service process matrix, the operations manager could focus on all of the following except a. automation b. standardization c. tight quality control d. removing some services e. customization

e (Service process design, moderate)

58. Which of the following is true regarding opportunities to improve service processes? a. Automation can do little to improve service processes, because services are so personal. b. Layout is of little consequence, since services seldom use an assembly line. c. If a work force is strongly committed, it need not be cross-trained and flexible. d. All of the above are true. e. None of the above is true.

e (Service process design, moderate)

71. Ethical and environmentally friendly processes include which of the following? a. emission controls b. recycling c. efficient use of resources d. reduction of waste by-products e. all of the above

e (Technology in services, moderate) {AACSB: Ethical Reasoning}