Chapter 8

45. In the weekly computer run to prepare payroll checks, a check was printed for an employee who had been terminated the previous week. Which of the following controls, if properly utilized, would have been most effective in preventing the error or ensuing its prompt detection? A. A control total for hours worked, prepared from time cards collected by the timekeeping department. B. Requiring the treasurer's office to account for the numbers of the prenumbered checks issued to the computer department for the processing of the payroll. C. Use of a check digit for employee numbers. D. Use of a header label for the payroll input sheet.

A. A control total for hours worked, prepared from time cards collected by the timekeeping department.

12. Which of the following would be least likely to be considered a desirable attribute of a database management system? A. Data redundancy. B. Quick response to users' request for information. C. Control of users' identification numbers and passwords. D. Logging of terminal activity.

A. Data redundancy.

6. The advent of personal computers has resulted in a(n): A. Decentralization of data processing activities. B. Increased concern over the accuracy of computerized processing. C. Decrease in the number of local area networks. D. Increase for general computer control activities.

A. Decentralization of data processing activities.

40. A control feature in a computer system requires the central processing unit (CPU) to send signals to the printer to activate the print mechanism for each character. The print mechanism, just prior to printing, sends a signal back to the CPU verifying that the proper print position has been activated. This type of data transmission is referred to as: A. Echo control. B. Validity control. C. Signal control. D. Check digit control.

A. Echo control.

14. Which of the following testing techniques is more commonly used by internal auditors than by independent auditors? A. Integrated test facilities. B. Test data. C. Controlled programs. D. Tagging and tracing transactions.

A. Integrated test facilities.

33. Auditing by testing the input and output of a computer system instead of the computer program itself will: A. Not detect program errors which do not show up in the output sampled. B. Detect all program errors, regardless of the nature of the output. C. Provide the auditors with the same type of evidence. D. Not provide the auditors with the confidence in the results of the auditing procedures.

A. Not detect program errors which do not show up in the output sampled.

16. When conducting field work for a physical inventory, an auditor cannot perform which of the following steps using a generalized audit software package? A. Observing inventory. B. Selecting sample items of inventory. C. Analyzing data resulting from inventory. D. Recalculating balances in inventory reports.

A. Observing inventory.

27. A data warehouse is an example of: A. On-line analytical processing. B. On-line transaction processing. C. Essential information batch processing. D. Decentralized processing.

A. On-line analytical processing.

23. Which of the following is not a programmed control? A. Private lines. B. Validity tests. C. Self-checking numbers. D. Limit tests.

A. Private lines.

3. Which of the following is a software component of a computer system? A. The operating system. B. The storage unit. C. The display monitor D. The optical scanner.

A. The operating system.

21. Which of the following personnel is responsible for the proper functioning of the security features built into the operating system? A. The systems programmer. B. The application programmer. C. The computer operator. D. The telecommunications specialist.

A. The systems programmer.

48. The capability for computers to communicate with physically remote terminals is an important feature in the design of modern business information systems. Which of the following risks associated with the use of telecommunications systems is minimized through the use of a password control system? A. Unauthorized access to system program and data files. B. Unauthorized physical availability of remote terminals. C. Physical destruction of system program and data files. D. Physical destruction of remote terminals.

A. Unauthorized access to system program and data files.

2. Which of the following is a password security problem? A. Users are assigned passwords when accounts are created, but do not change them. B. Users have accounts on several systems with different passwords. C. Users copy their passwords on note paper, which is kept in their wallets. D. Users select passwords that are not listed in any online dictionary.

A. Users are assigned passwords when accounts are created, but do not change them.

26. When designing the physical layout of a data processing center, which of the following would be least likely to be a necessary control that is considered? A. Design of controls to restrict access. B. Adequate physical layout space for the operating system. C. Inclusions of an adequate power supply system with surge protection. D. Consideration of risks related to other uses of electricity in the area.

B. Adequate physical layout space for the operating system.

25. In a client/server environment, the "client" is most likely to be the: A. Supplier of the computer system. B. Computers of various users. C. Computer that contains the networks software and provides services to a server. D. Database administrator.

B. Computers of various users.

42. The completeness of computer-generated sales figures can be tested by comparing the number of items listed on the daily sales report with the number of items billed on the actual invoices. This process uses: A. Self-checking numbers. B. Control totals. C. Validity tests. D. Process tracing data.

B. Control totals.

20. The best method of achieving internal control over advanced IT systems is through the use of: A. Batch controls. B. Controls written into the computer system. C. Equipment controls. D. Documentation controls.

B. Controls written into the computer system.

34. If a control total were to be computed on each of the following data items, which would best be identified as a hash total for a payroll computer application? A. Net pay. B. Department numbers. C. Hours worked. D. Total debits and total credits.

B. Department numbers.

35. Smith Corporation has numerous customers. A customer file is kept on disk storage. Each account in the customer file contains name, address, credit limit, and account balance. The auditor wishes to test this file to determine whether credit limits are being exceeded. The best procedure for the auditor to follow would be to: A. Develop test data that would cause some account balance to exceed the credit limit and determine if the system properly detects such situations. B. Develop a program to compare credit limits with account balances and print out the details of any account with a balance exceeding its credit limit. C. Require a printout of all account balances so they can be manually checked against the credit limits. D. Request a printout of a sample of account balances so they can be individually checked against the credit limits.

B. Develop a program to compare credit limits with account balances and print out the details of any account with a balance exceeding its credit limit.

24. A system in which the end user is responsible for the development and execution of the computer application that he or she uses is referred to as: A. Laptop computing. B. End-user computing. C. Distributed computing. D. Decentralized computing.

B. End-user computing.

36. In their consideration of a client's IT controls, the auditors will encounter general controls and application controls. Which of the following is an application control? A. The operations manual. B. Hash total. C. Systems documentation. D. Control over program changes.

B. Hash total.

15. General controls over IT systems are typically tested using: A. Generalized audit software. B. Observation, inspection, and inquiry. C. Program analysis techniques. D. Test data.

B. Observation, inspection, and inquiry.

28. An example of an access control is a: A. Check digit. B. Password. C. Test facility. D. Read only memory.

B. Password.

10. Which of the following would the auditors consider to be a weakness in an IT system? A. Operators have access to terminals. B. Programmers are allowed access to the file library. C. Reprocessing of exceptions detected by the computer is handled by a data control group. D. More than one employee is present when the computer facility is in use.

B. Programmers are allowed access to the file library.

13. A problem for a CPA associated with advanced IT systems is that: A. The audit trail normally does not exist. B. The audit trail is sometimes generated only in machine readable form. C. The client's internal auditors may have been involved at the design stage. D. Tests of controls are not possible.

B. The audit trail is sometimes generated only in machine readable form.

46. A company's labor distribution report requires extensive corrections each month because of labor hours charged to inactive jobs. Which of the following data processing input controls appears to be missing? A. Completeness test. B. Validity test. C. Limit test. D. Control total.

B. Validity test.

19. Which of the following is not a distinctive characteristic of advanced IT systems? A. Data communication. B. Integrated database. C. Batch processing of transactions. D. Distributive data processing.

C. Batch processing of transactions.

32. Parallel simulation programs used by the auditors for testing programs: A. Must simulate all functions of the production computer-application system. B. Cannot be developed with the aid of generalized audit software. C. Can use live data or test data. D. Is generally restricted to data base environments.

C. Can use live data or test data.

18. Which of the following testing techniques minimizes the possibility that the auditors will contaminate a client's financial records? A. Test data. B. Integrated test facilities. C. Controlled programs. D. Tagging and tracing transactions.

C. Controlled programs.

37. When erroneous data are detected by computer program controls, such data may be excluded from processing and printed on an exception report. The exception report should most probably be reviewed and followed up on by the: A. Supervisor of computer operations. B. Systems analyst. C. Data control group. D. Computer programmer.

C. Data control group.

7. Which of the following is most likely to include user group development and execution of certain computer applications? A. Telecommunication transmission systems. B. Database administration. C. End user computing. D. Electronic data interchange systems.

C. End user computing.

8. Which of the following is not a data transmission control? A. Echo checks. B. Data encryption. C. File labels. D. Parity checks.

C. File labels.

31. Which of the following computer system risks would be increased by the installation of a database system? A. Programming errors. B. Data entry errors. C. Improper data access. D. Loss of power.

C. Improper data access.

9. Which of the following is an example of general computer control? A. Input validation checks. B. Control total. C. Operations manual. D. Generalized audit software.

C. Operations manual.

43. Internal control is ineffective when computer department personnel: A. Participate in computer software acquisition decisions. B. Design documentation for computerized systems. C. Originate changes in master files. D. Provide physical security for program files.

C. Originate changes in master files.

29. End-user computing is most likely to occur on which of the following types of computers? A. Mainframe. B. Macrocomputers. C. Personal computers. D. Personal reference assistants.

C. Personal computers.

30. Auditing through the computer is most likely to be used when: A. Input transactions are batched and system logic is straightforward. B. Processing primarily consists of sorting the input data and updating the master file sequentially. C. Processing is primarily on line and updating is real-time. D. Outputs are in hard copy form.

C. Processing is primarily on line and updating is real-time.

38. The purpose of using generalized computer programs is to test and analyze a client's computer: A. Systems. B. Equipment. C. Records. D. Processing logic.

C. Records.

5. Which of the following computer related employees should not be allowed access to program listings of application programs? A. The systems analyst. B. The programmer. C. The operator. D. The librarian.

C. The operator.

17. Which of the following personnel is responsible for determining the computer processing needs of the various users? A. The application programmer. B. The computer operator. C. The systems analyst. D. The systems programmer.

C. The systems analyst.

11. Which of the following is least likely to be tested with generalized audit software? A. An aging of accounts receivable. B. A schedule of inventory. C. A depreciation schedule. D. A computer operations manual.

D. A computer operations manual.

4. Which of the following is least likely to be a general control over computer activities? A. Procedures for developing new programs and systems. B. Requirements for system documentation. C. A change request log. D. A control total.

D. A control total.

41. Which of the following constitutes a weakness in the internal control of a computer system? A. One generation of backup files is stored in an off-premises location. B. Machine operators distribute error messages to the control group. C. Machine operators do not have access to the complete systems manual. D. Machine operators are supervised by the programmer.

D. Machine operators are supervised by the programmer.

22. Which of the following is not a data transmission control? A. Data encryption. B. Parity check. C. Message acknowledgment techniques D. Distributed data processing.

D. Distributed data processing.

1. Which of the following procedures would an entity most likely include in its disaster recovery plan? A. Convert all data from external formats to an internal company format. B. Maintain a program to prevent illegal activity. C. Develop an auxiliary power supply to provide uninterrupted electricity. D. Store duplicate copies of files in a location away from the computer center.

D. Store duplicate copies of files in a location away from the computer center.

39. An auditor may decide not to perform tests of controls related to the control activities within the computer portion of the client's internal control. Which of the following would not be a valid reason for choosing to omit such test? A. The controls duplicate operative controls existing elsewhere. B. There appear to be major weaknesses that would preclude reliance on the stated procedure. C. The time and dollar costs of testing exceed the time and dollar savings in substantive testing if the tests show the controls to be operative. D. The controls appear adequate.

D. The controls appear adequate.

44. Which of the following is likely to be of least importance to an auditor in considering the internal control in a company with computer processing? A. The segregation of duties within the computer center. B. The control over source documents. C. The documentation maintained for accounting applications. D. The cost/benefit of data processing operations.

D. The cost/benefit of data processing operations.

49. Consider the following computer applications: At a catalog sales firm, as phone orders are entered into their computer, both inventory and credit are immediately checked. (1) A manufacturer's computer sends the coming week's production schedule and parts orders to a supplier's computer. Which statement below is true for these applications? A. Both applications are examples of EDI. B. Both applications are examples of on-line real-time processing. C. The first application is an example of EDI and the second is an example of on-line real-time. D. The first application is an example of on-line real-time and the second is an example of EDI.

D. The first application is an example of on-line real-time and the second is an example of EDI.

47. Passwords for microcomputer software programs are designed to prevent: A. Inaccurate processing of data. B. Unauthorized access to the computer. C. Incomplete updating of data files. D. Unauthorized use of the software.

D. Unauthorized use of the software.