Chapter 9: Understanding Landscapes
Match the letter with the appropriate feature indicated on the image by the arrow. (a, b, c)
A - A bedding plane separating one bed of rock from another B - Vertical fracture in the rock C - Slope composed of loose rock material
Igneous
A volcano erupts lava, which then cools and solidifies.
Felsic
Abundant magnesium and iron; dark colored
Intermediate
Abundant quartz and feldspar; light colored
Gneiss
Alternating dark and light bands; a banded, compositional foliation
Horizontal lines can be followed around the cliff.
Bedding of sedimentary rock layers can be seen in the cliff.
Weathering
Breaking down of rocks either mechanically or chemically
______ are formed in landscapes when the parent material rocks are very hard and resist erosion. Multiple select question. Cliffs Peaks Steep slopes Gentle slopes Valleys
Cliffs Peaks Steep slopes
_______ are examples of features readily identifiable through simple visual observation in many landscapes. Multiple select question. Cliffs and slopes Sedimentary bedding planes Loose pieces of rock Numeric ages of rocks Rock colors Fractures
Cliffs and slopes Sedimentary bedding planes Loose pieces of rock Rock colors Fractures
Which of these approaches would be helpful strategies for observing landscapes? Multiple select question. Compare different parts of the landscape to each other. Spend most of your time describing the tiny details. Focus on one part of the landscape at a time. Focus on one geologic feature at a time. Ignore geologic features entirely. Draw a sketch to capture main features.
Compare different parts of the landscape to each other. Focus on one part of the landscape at a time. Focus on one geologic feature at a time. Draw a sketch to capture main features.
Which of these approaches would be helpful strategies for observing landscapes? Multiple select question. Draw a sketch to capture main features. Focus on one part of the landscape at a time. Compare different parts of the landscape to each other. Ignore geologic features entirely. Spend most of your time describing the tiny details. Focus on one geologic feature at a time.
Draw a sketch to capture main features. Focus on one part of the landscape at a time. Compare different parts of the landscape to each other. Focus on one geologic feature at a time.
Shale
Easily eroded, thinly bedded rock that forms soft slopes covered by small, loose chips derived from weathering
True or false: In sedimentary rocks, rock layers are deposited and always remain in horizontal layers. True false question. True False
False
Granite
Felsic
Marble
Fine-grained to coarse-grained calcite; metamorphosed limestone
Coal
Formed from buried and compacted wood and plant material
Iron Formation
Formed from precipitation of seawater early in Earth history; used in steel production
Gypsum
Formed through evaporation of seawater; used in wallboard
Chert
Formed when silica-rich plankton accumulates on the ocean floor
The vertical lines highlighted are what type of feature? Multiple choice question. Bedding Loose rock Slopes Fractures
Fractures
___ is a coarse-grained intrusive igneous rock composed predominantly of feldspar and quartz.
Granite
volcanic rock
Has layers, as well as fractures that are perpendicular to the layers; may be gray, green, brown, tan, or cream
______ rocks form from the cooling of magma or lava. Multiple choice question. Metamorphic Igneous Sedimentary
Igneous
Diorite
Intermediate
basaltic lava flow
Is the most common type of volcanic rock; spreads out easily and forms a dark rock; columnar joints common
granite
Is usually fractured and makes up most of the continental crust
Sandstone
Layers that differ in color, grain size, or composition because they were deposited during changing environmental conditions
Marble
Limestone
Sedimentary
Loose sediment on Earth's surface is deposited by moving water, air, or ice.
Basalt
Mafic
Which of the following rock cycle processes usually occurs at great depth, in the lower crust or the mantle? Multiple choice question. Melting Lithification Erosion Transportation
Melting
Which of the following rock cycle processes usually occurs at great depth, in the lower crust or the mantle? Multiple choice question. Melting Lithification Transportation Erosion
Melting
Which of the following type of rock is formed by the solid-state alteration of a previously existing rock by heating, pressure, and/or fluid chemistry? Multiple choice question. Igneous Metamorphic Sedimentary
Metamorphic
Which of the following type of rock is formed by the solid-state alteration of a previously existing rock by heating, pressure, and/or fluid chemistry? Multiple choice question. Sedimentary Igneous Metamorphic
Metamorphic
___ rocks are formed by changing previously existing rocks through increases in temperature or pressure, deformation, or chemical reactions.
Metamorphic or metamorphosed
Schist
Mica crystals that are large enough to see with the naked eye
Mafic/Ultramafic
Mineral content in between; color moderate
Transportation
Moving pieces of rock by wind, ice, or water
What type of sedimentary rocks commonly contains minerals precipitated from solution as water evaporates or materials formed through biological activity such as making shells or other hard parts? Multiple choice question. Clastic Nonclastic
Nonclastic
Deposition
Occurs when the energy of the transported materials decrease
Metamorphic
Previously existing rocks are changed by temperature, pressure, or deformation.
Lithification
Process of sediment turning into rock
Different interpretations may be made regarding the properties of rock units 2, 4, and 6. Match the rock unit with its appropriate interpretation.
Rock Unit 2 - The slope indicates that the rock is somewhat easily weathered. Rock Unit 4 - The rock forms a steep cliff because it is resistant to weathering. Rock Unit 6 - This is composed of loose rock that has weathered from the rock layers above.
Edges of some rock layers form cliffs, whereas others form slopes.
Rock layers have different resistances to weathering processes.
_____ are made up of _____. Multiple choice question. Rocks; minerals Minerals; rocks
Rocks; minerals
Quartzite
Sandstone
______ rocks can be metamorphosed by changes in temperature or pressure. Multiple select question. Sedimentary Igneous Metamorphic
Sedimentary Igneous Metamorphic
Slate and Gneiss
Shale
Phyllite
Sheen present due to microscopic mica minerals
_____ are the most common mineral group in Earth's crust. Multiple choice question. Salts Carbonates Oxides Sulfides Silicates
Silicates
A slope at the base of the cliff is composed of loose pieces of rock.
The main cliff has weathered, causing loose rock to fall to the bottom and accumulate.
Vertical cracks extend back into the rock.
The rock has fractured, and these breaks in the rock are cutting vertically across layers.
As sediment is buried by material above it, compaction starts to occur. Identify some of the effects of this compaction on the sediment. Multiple select question. The sediment becomes more dense packed. Clay particle alignment becomes randomized. Pore space is increased. Excess water is expelled. Clasts get pushed together.
The sediment becomes more dense packed. Excess water is expelled. Clasts get pushed together.
Quartzite
Tightly merged quartz crystals; metamorphosed sandstone
True or false: Metamorphism may occur without deformation. True false question.
True
Uplift
Upward movement of underground rocks to the surface
The three primary forces that deposit sediments, which may become sedimentary rocks, are water, ___ , and ___
air/wind; ice/glaciers
Layers within sedimentary rock are called ______. Multiple choice question. fractures sediment beds slopes
beds
All of the following are examples of nonclastic sedimentary rocks, except ______. Multiple choice question. breccia coal rock salt iron formation
breccia
Crystals in coarse-grained igneous rocks normally _____ be seen with the unaided eye. Multiple choice question. can cannot
can
Nonclastic sedimentary rocks are commonly formed by ______ processes. Multiple choice question. chemical and biological chemical biological
chemical and biolgical
The grain size of ______ igneous rocks is larger than 1 millimeter. More commonly, this grain size is described as being large enough to see with the unaided eye. Multiple choice question. vesicular fine-grained coarse-grained
coarse-grained
Metamorphism involves the processes of ______. Multiple select question. deformation erosion pressure heat weathering
deformation pressure heat
In rock subjected to heat and pressure, folding, faulting, and shearing may simply be called ______, but if mineralogical or rock texture changes take place, the process is called ______. Multiple choice question. rotation; fracture deformation; displacement metamorphism; melting deformation; metamorphism
deformation; metamorphism
True or false: Only one strategy is employed by geologists to observe a landscape. True false question. True False
false Reason: There are many helpful strategies to help a geologist make observations about a landscape, including focusing on individual features, noticing layers and colors of rocks, and sketching major components.
Layers in sedimentary rock can be _____. Multiple select question. invisible folded tilted horizontal
folded tilted horizontal
Physical geographers and geologists who study the spatial pattern, form, and evolution of landforms to understand landscapes are ______. Multiple choice question. landscapologists physicists geomorphologists
geomorphologists
A coarse-grained intrusive igneous rock composed mostly of feldspar and quartz is called ______. Multiple choice question. granite basalt gabbro andesite rhyolite
granite
The image shows the igneous rock ______, which makes up the bulk of the continental crust. Multiple choice question. sandstone granite basalt
granite
Besides liquid water, the other two transportation agents of sediments are ___ and ___. Gravity also plays a role in moving sediments.
ice/glaciers; wind/air
Rock that forms from magma, lava, or ash is ___ rock. This type of rock may form when volcanoes erupt ash and lava or when molten rock crystallizes in magma chambers at depth.
igneous
This image is a landscape of ______, a type of sedimentary rock. (image: Guadalupe Mtns, TX) Multiple choice question. limestone sandstone shale
limestone
Sedimentary rocks are formed when loose sediment undergoes the process of ___, which involves the compaction and cementation of materials.
lithification or diagenesis
Melting of rocks at great depth produces ___.
magma
If rock is exposed to enough heat after metamorphism, it will eventually ______ into magma. Multiple choice question. solidify crystallize weather melt
melt
If rock is exposed to enough heat after metamorphism, it will eventually ______ into magma. Multiple choice question. weather melt solidify crystallize
melt
All of the following describe processes involved in the formation of sedimentary rock, except ______. Multiple choice question. compaction cementation lithification melting
melting
All of the following describe processes involved in the formation of sedimentary rock, except ______. Multiple choice question. lithification melting compaction cementation
melting
Some ___ rocks form layers that are platy and jagged outcrops, as in the attached image.
metamorphic or foliated
Changing a rock by heat, pressure, or deformation is called
metamorphism
Changing a rock by heat, pressure, or deformation is called ___
metamorphism
Although a rock may appear homogeneous, most are composed of various
minerals or crystals
Compaction causes sediment to become ______. Multiple select question. more porous less dense more compact more dense
more compact more dense
Lava is molten rock that cools ______. Multiple choice question. on Earth's surface underground
on Earth's surface
Temperature and pressure changes can result in ______ weathering. Multiple choice question. physical chemical
physical
The two types of weathering are ______ and ______. Multiple select question. physical biological ecological chemical
physical chemical
Loose materials called ______ are formed by the breaking down and wearing away of rocks in the landscape. Multiple choice question. soil sludge dirt sediment
sediment
When rocks break down and wear away, the material that comes loose is called
sediment
The three agents of ______ that deposit their load when their energy decreases are ice, wind, and water. Multiple choice question. gravity lithification weathering sediment transportation
sediment transportation
Clastic sedimentary rocks are classified primarily based on the size and ______ of their clasts. Multiple choice question. color age shape
shape
Clastic sedimentary rocks are classified primarily based on the size and ______ of their clasts. Multiple choice question. color shape age
shape
Metamorphic rocks are recognized in the landscape by their ______.
shiny luster mineral-filled fractures (i.e., veins)
More than 90% of the minerals in Earth's crust belong to the ______ family. Multiple choice question. carbonate sulfide silicate
silicate
The ___ mineral group is based on the compound (SiO4)-4; the ___ minerals do not contain silicon.
silicate; nonsilicate
Distinguish silicate from nonsilicate minerals by matching each group to its description.
silicates <-- Based on (SiO4)^-4 nonsilicates <-- Does not contain silicon
Clastic sedimentary rocks are composed of rock and mineral pieces; we classify them according to the ___ and shape of the clasts.
size
Geomorphologists study ______. Multiple choice question. the evolution of landforms sedimentary rocks and processes fossils
the evolution of landforms
Parent rocks that are soft tend to erode more easily, forming ______ in landscapes. Multiple select question. cliffs steep slopes valleys peaks gentle slopes
valleys gentle slopes
The primary forces that act to deposit sediments, which may eventually become sedimentary rocks, are ______. Multiple select question. water elevation wind ice tides
water wind ice