Construction Final
The width of a header for a window with a rough opening with of 35 1/4 would be?
38 1/4
Flight
A series of steps that are straight and continuous without breaks is called
7 inch rise 11 inch tread
The best stair riser and tread combination according to code
Header
The framing member that distributes the weight of the structure around a door or window opening
trimmer stud
The framing member that forms the side of a rough opening for a window or door
Span
The length of the building
foundation plan
The location and dimensions of footings are found on the?
starting newel post
The main support for a handrail at the bottom of a stairway
gable roof
The most common type of roof
unit rise
The number of inches the rafter rises vertically for each foot of run
title block
The part of the drawing that shows information about scale the date of the last revision and the drawing number is the?
Western frame
The platform frame used in modern residential and light commercial construction is also known as the?
scale
The ratio between the size of an object on a drawing and its actual size
half the span
The roof run measurement is equal to
treads
The stairway includes the stair framing, risers, and one other thing
balloon framing
The type of framing typically used to counteract wind loads in hurricane-prone areas.
hip roof
The type of roof that has four sides running toward the center of the building
hip roof
The type of roof that is considered an efficient design in areas subject to hurricanes
True
a double top plate can be used to connect partitions that are perpendicular to a wall
Floorplan
a drawing that shows the horizontal view of the building the length and width of the building and the floor layout of the rooms is the?
closed stairway
a stairway that has a solid walls on both sides is classified as a
bench mark
all finish grade references shown are keyed to a reference point
half-inch plywood
fabricated headers normally use what inch plywood as spacers
The run
half the distance of the span
closed stairway
has walls on both sides
to support the rafters
is not a purpose of a ceiling joist
Break lines
lines on drawings used to indicate that an object or area is not being shown in its entirety
7 inches
maximum stair riser height specified in the international building code
cripple stud
short framing member that fills the space between the rough sill and the soleplate
38"
the maximum safe handrail height
false
the stud is the main horizontal framing member in a wall
purpose of an interior partition backer
to provide solid connection to the exterior wall
The width of the header
width of the opening plus the width of the two trimmer studs
