DMV TEST #4

Do not _______ at crash scenes or at locations along the highway where a law enforcement officer may have a vehicle pulled off the road.

Rubbernecking (slowing down the vehicle, being distracted or staring) could cause drivers to become involved in a crash.

a four-way intersection

This sign warns drivers of

A double solid white line marks the edge of a traffic lane where:

Travel in the same direction is permitted on both sides of the line, but crossing the line is prohibited

Drivers must reduce speed or stop if necessary

What does this regulatory sign indicate?

Road crew at work ahead

What does this sign indicate?

On two-lane roads where traffic moves in opposite directions, you may pass on the left only when:

a broken yellow line is in your lane

When making a right turn, look right and left, yield right-of-way, and turn the steering wheel using:

a hand-over-hand technique

When you see the letters 'RR' painted on the pavement, you are approaching:

a railroad crossing

_________indicates the right edge of traffic lane on a road

a solid or broken white line

On a divided highway, _________indicates the left edge of traffic lanes going in the same direction as you.

a solid or broken yellow line

When there is no traffic on both sides of the road, a turn around can be performed using

a three-point turn

When there is not enough room for a U-turn, you are suggested to follow

a three-point turn

Escape ramps¹

are made to stop runaway vehicles safely without injuring drivers and passengers on steep mountain grades.

What should you do if fog closes in completely while driving, and visibility is reduced to near zero?

carefully pull as far off the road as possible, and stop.

The area of the freeway on the outside of the solid white line is meant for:

emergency only

_________ are designed to allow vehicles to slow down and leave the expressways.

exit ramps

To turn left from a one-way street to another, a driver must begin the turn:

from the left lane and make the turn close to the left curb

When you find both a solid and a dashed yellow line between opposing lanes of traffic, you must not pass:

if the solid yellow line is on your side

if you see double solid center yellow lines on your way, this means:

no passing is permitted

When you drive in city traffic, you should try to look at least:

one block ahead

When passing a motorcyclist, drivers must:

pass in an adjacent lane

When you see an oncoming car to the left and a bicyclist to the right while driving, you must:

slow down and let the car pass

Which of the following statements is true when driving on highways?

slow-moving vehicles should use the right lane and fast-moving vehicles should use left lane

______lines mean that passing is not allowed in either direction.

solid double yelllow

On a four-lane divided roadway or a one-way road, a solid yellow line usually marks:

the left edge of the pavement

When there are three or more lanes going in one direction on a highway, fast-moving vehicles should use:

the left lane

In a vehicle with a steering wheel interlock system, do not turn the ignition to the lock position while driving, as it will cause:

the steering wheel to lock

The right lane on a freeway should remain open for ________ as much as possible.

traffic entering and leaving the freeway

Passing on the right is permitted in all of the following situations, EXCEPT:

when driving in a lane set aside for left turns

When approaching an intersection where there are no signs or traffic lights, you must:

yield to vehicles on the right

When driving on gravel or dirt, you must slow down because:

you do not have much traction

A two-headed arrow with one head pointing straight ahead and the other pointing to the left means:

you may either proceed straight ahead or turn to the left

If it feels like your tires have lost traction with the surface of the road, you should:

1.ease your foot off the gas pedal 2. not stop until your tires are gripping the road again 3.keep the steering wheel straight.

Passing on the right is permitted in the following situations

1.when passing a vehicle that is in the left-turn lane 2. on one-way streets where all lanes of traffic move in the same direction 3.on highways that have at least two lanes traveling in each direction

pavement

A hard smooth surface, especially of a public area or thoroughfare, that will bear travel.

roadway

A road, especially the part over which vehicles travel.

If your vehicle's wheels drift onto the shoulder of the road, you must:

If your vehicle wheels drift onto the shoulder of the road, do not try to turn back onto the pavement right away. This might throw the vehicle off balance. You must try to slow down, regain control, and turn slowly onto the road.