Driver's Permit

Drag Racing/Reckless Stunt Driving

"Reckless Stunt Driving" is operation "any vehicle while drag racing, in violation of Code Section 40=6=186, or laying drags, in violation of Code Section 40-6-251, in reckless disregard for the safety of persons on a highway or upon private property without express authorization from the owner of such property." Penalties 1st Conviction within 5 years - 12-month suspension - Eligible for early reinstatement at the end of 120 days - Restoration Fee $210/$200 by mail - Limit permit available 2nd Conviction within 5 years - 3 year suspension - Eligible for early reinstatement after 18 months from the date of conviction - Restoration Fee $310/$300 by mail - Limited permit available 3rd and Subsequent Conviction within 5 years - Habitual Violator (HV) Revocation - No limited permit available - May apply for a probationary license per O.C.G.A 40-5-58

Speed Limits

1. 30 mph in any residential or urban district 2. 35 mph on any unpaved country road 3. 70 mph on a rural interstate 4. 65 mph on an urban interstate or multi-lane divided highway 5. 55 mph in all other areas *These are general rules.

Aggressive Driving

1. A person commits the offense of aggressive driving when they operate any motor vehicle with the intent to annoy, harass, molest, intimidate, injure, or obstruct another person. 2. Example include but are not limited to tailgating, cutting in front of another driver, blocking other drivers from passing or changing lanes, etc. 3. A conviction for aggressive driving is considered misdemeanor of a high and aggravated nature. The penalty for committing this violation may include imprisonment, fines, and, if the driver is under 21, conviction will result in a suspension of all driving privileges.

Navigating a Roundabout (Pedestrians)

1. Approach: At the pedestrian crosswalk, look to make sure cars stop for you. Use pedestrian crossing signs if available. 2. Cross: Cross to the pedestrian refuge. Look to make sure cars stop for you. Finish crossing to the opposite sidewalk. Never cross to the center island.

How to parallel park

1. Drive past the parking space you want to use and stop when you're even with the car ahead of the space 2. Turn your wheels sharply to the right and back up slowly towards the car behind the space you want to use 3. As your front door passes the back bumper of the car ahead of the space, quickly straighten your wheels and continue to back up diagonally 4. When your front bumper is completely clear of the car ahead of you, turn your wheels sharply left and back slowly toward the car behind you 5. Place car in drive, turn wheels sharply to the right, and pull towards the center of the parking space.

Driving under the influence of drugs and alcohol

1. It is unlawful for any person to operate a motor vehicle while under the influence of alcohol, a drug, or any other substance which impairs their ability to safely do so 2. A person 21 or over is considered "Under the Influence of Alcohol" when 0.08 gm or more by alcohol weight is present in the blood 3. A person under 21 is irrefutably considered "Under the Influence of Alcohol" when 0.02 gm or more by alcohol weight is present in the blood Having a prescription for certain medication is not a defense if the medication impairs your ability to safely operate a motor vehicle. Penalties for DUI are severe, with fines up to $1,000, jail sentences up to 12 months, and mandatory suspension of your driving privileges.

Highway Work Zones

1. Obey the signs 2. Reduce your speed 3. Obey flaggers 4. Yield to amber lights in work zones 5. Yield to mobile work vehicles

The three most basic traffic laws require drivers to:

1. Obey traffic lights and signs. 2. Obey traffic direction of authority. 3. Never drive on closed roadway.

How to pass on a two-lane road

1. Wait for the passing zone to begin. A passing zone is indicated by striped lines to the right of the center line of the roadway. If the line nearest your vehicle is solid, you are NOT in a passing zone. 2. Before leaving your lane, check your rear view mirrors and side mirrors and check your blind spots. 3. Activate your left turn signal. 4. Pass on the left and do not return to the right lane until your vehicle is safely clear of the overtaken vehicle. 5. Activate your right turn signal before returning to the right lane. Turn your signal off once your have returned to the right lane.

Common right-of-way scenarios

1. When traveling on a roadway that intersects with another roadway, if you are faced with a stop sign, but other traffic is not, you may proceed only after stopping and yielding the right-of-way to any other vehicle or pedestrian either in the intersection as to make it dangerous to travel through the intersection. 2. At intersections where there are no stop signs, yield sign or other traffic signals, if two vehicles come to the intersection at the same time, the driver of the vehicle on the left must yield to the driver of the vehicle on the right. 3. At a four way intersection where all drivers are faced with stop signs, all drivers must yield to pedestrians; otherwise the vehicle should proceed through the intersection in a "first to arrive, first to proceed" order. If two vehicles reach the intersection reach the intersection at approximately the same time, yield to any vehicles on your right.

Controlled-Access Roadways

1. You are prohibited from entering or leaving any controlled-access roadway at unauthorized entrances or exits 2. Certain types of vehicles may be prohibited on controlled-access roadways if signs are posted to this effect 3. Backing up is prohibited on controlled access roadways 4. An example of a controlled-access roadway includes any tolled facility in Georgia such as the I-85 Express Lanes or the reversible I-75 Express Lanes. Tolled lanes in Georgia require motorists to mount a registered Peach Pass transponder in their vehicle in order to access the lanes. Peach Pass can also be used in Florida and North Carolina. Registered owners of the vehicle that enters the tolled lane without an active Peach Pass will receive a violation notice in the mail. 5. You are prohibited from entering the reversible Express Lanes when the access control gates are closed or closing

Pedestrian-Hybrid Beacons

A pedestrian hybrid beacon is a special type of pedestrian activated warning device used with signs and pavement markings to warn and control traffic at locations where pedestrians enter or cross a street or highway. Pedestrian hybrid beacons are only installed at a marked crosswalk.

Travelling Speed

Any driver convicted of speeding 75 mph or more on a two-lane road or 85 mph or more on any road in Georgia, will be assessed a $200 state fee plus any local fines.

Night Driving

Because of decreased vision at night and the glare of oncoming headlights, night driving presents its own unique challenges. Unfamiliar roads and unexpected situations are more likely to cause hazardous driving conditions. You can help ensure safe driving in several ways. 1. Make sure your headlights are working properly and the lenses are kept clean. Periodically have them checked for correct aim/alignment 2. Don't "overdrive" your headlights. When traveling at night or in other situations that make the use of headlights necessary for safe travel, do not drive at a speed that requires a stopping time greater than the distance illuminated by your headlights 3. Slow down when oncoming traffic is approaching or when you are nearing a curve 4. If visibility is greatly reduced, use the edge line as a guide to maintaining your lane of travel. If there is no edge line, use the center line to guide yourself 5. Keep your windshield clean 6. Do not drive if you are tired. More frequent stops, more fresh air, lively radio programs and other measures can help you to avoid drowsiness and inattention 7. Watch carefully for highway signs; they are harder to see at night 8. Watch carefully for pedestrians and for vehicles stopped along the edge of the road; 9. Do not stop on the roadway.

Backing up

Before backing, check all sides of your vehicle to and make sure it is safe to do so. Look over your right shoulder and don't depend on your mirrors.

Yellow Lane Control Signal

Clear the lane (if flashing, left turn is permitted).

Distracted Driving

Distracted driving is one of the fastest growing safety issues. According to the National Highway Traffic Safety Administration (NHTSA), 3142 people were killed on U.S. roadways i 2019 because of distracted drivers. Distracted driving is doing another activity while driving. This takes the driver's attention away from the primary task of driving and increases the risk of crashing. Common distractions include but are not limited to talking on a cell phone, texting, reading, eating, grooming, using a navigation device, and adjusting the stereo system. The presence of passengers and pets can also increase crash risk. Georgia law requires drivers to exercise due care in operating a motor vehicle and prohibits any action that distracts the driver from the safe operation of such vehicle.

Safety Restraints for Children

Every driver transporting a child under eight, must be properly restrain the child in a child passenger restraining system appropriate for the child's height and weight. The restraint system must comply with the United States Department of Transportation Federal Motor Vehicle Safety Standard 213. Under limited circumstances, a child under eight may be exempt from this requirement.

Overhead Lane Signs

Examples

Triangle Signs

Exclusively yield signs.

Navigating a Roundabout (Cyclists)

Experienced cyclists may navigate roundabouts lie motorists. Do not hug the curb. Ride in the middle of the lane to prevent vehicles from passing you. Stop for pedestrians in crosswalks. Children or cyclists who are not comfortable entering the flow of traffic should walk their cycles and act as pedestrians.

Horizontal Rectangle Signs

Generally used as guide signs. They show locations, directions, or other special information.

Vertical Rectangle Signs

Generally used for regulatory signs, which tell you what you must do. You must obey them in the same manner as traffic laws.

Safety Belts

Georgia law states that each occupant in the front seat of a passenger vehicle traveling on Georgia roads and highways must be secured by a seat safety belt (lap and shoulder). All occupants of any passenger vehicle must utilize a seat safety belt if they are under the age of 18. Safety belts are needed because they are the most effective occupant protection in all types of vehicle crashes. According to Crash Stats from the National Highway Traffic Safety Administration, seat belts saved 12,802 lives in 2014. Georgia Department of Transportation reports that the risk of fatality in a crash is reduced by about 45% when seat belts are used. Using safety belts correctly is a preventable health care habit that: 1. helps you keep control of the vehicle 2. helps keep your head from striking the dash or windshield 3. helps keep people in the vehicle from hitting each other 4. helps spread the crash force across the stronger parts of the body 5. helps protect you from injury 6. helps keep you from being ejected from the vehicle

Guide Signs

Guide signs provide directional and mileage information to specific destinations. They can be rectangular or have other shapes. Route signs mark federal interstates, state highways, and county or municipal roadways.

Obstructing the Driver's View

If a vehicle is overloaded with passengers or freight so as to obstruct the view of the driver or interfere with the mechanical operation, it cannot be legally driven. Passengers must not ride in a position that interferes with the driver's view or his or her control of the vehicle.

Stopping, standing and parking

It is against the law to park on a highway. If the vehicle is disabled, you should make every practical effort to park off the highway, leaving free passage and a clear view of your vehicle for 200 feet in each direction. Prohibited: 1. On the street of any parked vehicle 2. On a sidewalk 3. Within an intersection 4. On a crosswalk 5. Between a safety zone and the adjacent curb 6. Alongside or opposite any street excavation or obstruction when stopping, standing, or parking would obstruct traffic 7. Upon a bridge or overpass, or within a high-way tunnel 8. On any railroad tracks 9. On a controlled access roadway 10. In the area between roadways on a divided highway, including crossovers 11. At any place marked by no-parking sign Permitted: 1. In front of a public or private driveway 2. Within 15 feet of a fire hydrant 3. Within 20 feet of a crosswalk at an intersection 4. Within 30 feet of a stop sign, yield sign, or traffic control signal 5. Within 20 feet of a fire station driveway 6. Within 75 feet of the spot across the street from the spot across the street from a fire station driveway 7. Within 50 feet of a railroad crossing 8. At any place where official signs prohibit

Median Strip

It is unlawful to drive across a dividing section, barrier, or unpaved strip which separates two roadways at any point other than at an authorized opening or crossover.

Impaired Hearing and Vision

It is unlawful to operate a motor vehicle while wearing a headphone, headset, or any other device which would impair the driver's ability to hear. Also, the driver must not wear anything which would obstruct his or her vision while driving a motor vehicle.

Pentagon Signs

Means you are approaching a school zone and/or school zone.

Red Lane Control Signal

No travel allowed in the direction you are going.

Opening Vehicle Doors

Opening the doors of a vehicle on the side on which traffic is moving is prohibited unless it is safe to do so and unless it can be done without interfering with the movement of other traffic, including bicyclists that may be operating close to the lane of parked cars.

Pavement Markings

Pavement markings, like highway signs, are used to warn and direct drivers and to regulate traffic.

Reckless Driving

Reckless driving is defined as driving any vehicle in reckless disregard for the safety of persons or property. Penalties for reckless driving can include a fine of up to $1000, imprisonment for up to 12 months, and, if the driver is under 21 years of age, conviction will result in a suspension of all driving privileges.

Meaning of traffic light symbols and colors meaning

Red - Make a complete stop before entering the crosswalk or intersection and wait until the light turns green before proceeding. Yellow - Warns that the light is changing from green to red. Slow down and prepare to stop. Green - You may proceed if it is safe to do so after stopping for pedestrians and yielding to vehicles within the intersection. Upward green arrow - You may proceed carefully only in the direction the arrow is pointing after stopping for pedestrians and yielding to vehicles within the intersection. In this case you may only go straight ahead only. Sideways green arrow - A green arrow, in this case, means you may only turn in the direction the of the arrow after stopping foe pedestrians and yielding to vehicles within the intersection. Yellow arrow - A yellow arrow may appear after a green arrow and warns you to clear the intersection. Red flashing light - You must stop completely (treat as you would a stop sign). Proceed with caution only after yielding the right-of-way to pedestrians and to other vehicles at the intersection. Yellow flashing light - You must slow down and exercise caution before proceeding through the intersection.

Regulatory Signs

Regulatory signs tell drivers what they may or may not do.

Riding in Trailers

Riding in a house trailer, or any other vehicular drawn trailer, is not allowed while it is being moved upon a street or highway. There is a high likelihood of injury or death if passengers are unrestrained in the trailer and the vehicle is involved in a crash or the trailer becomes disconnected from the vehicle.

Right-of-way

Right-of-way is a phrase used to describe who has the lawful authority to enter a roadway, change lanes within a roadway, make a turn from a roadway, travel through an intersection, or make any other traffic related movement.

Navigating a Roundabout

Roundabouts are sometimes used at intersections instead of stop signs. The purpose of a roundabout is to allow the intersection to handle heavier traffic flow without the need for a signal or a four-way stop. When entering a roundabout, traffic laws concerning right-of-way still apply. You must yield to other traffic that is already in the roundabout. You will always enter a roundabout to the right, and continue circling until you have reached the roadway onto which you want to turn. When reaching the desired road, you will always exit to the right.

Hands Free Georgia Law (HB 673)

Since July 1, 2018, pursuant to 40-6-241(c), all drivers operating a motor vehicle on any highway of this state are prohibited from: 1. Holding or supporting, with any part of the body, a wireless telecommunications device or stand-alone electronic device. 2. Writing, sending or reading any text-based communication, including a text message, instant message, e-mail or internet data. 3. Watching, recording, or broadcasting a video or movie. Penalties 1st conviction - 1 point and fine not more than $50 2nd conviction - 2 points and fine not more that $100 3rd or more convictions - 3 points and fine nor more than $150

Navigating a Roundabout (Motorists)

Single Lane 1. Approach: Slow down to the posted advisory speed. Stop for pedestrians in the crosswalk; they have the right-of-way. 2. Enter: When entering the roundabout, yield to circulating vehicles. Wait for a gap and then merge into traffic in the roundabout. Traffic in a roundabout always circulates counterclockwise. 3. Proceed: Continue circling through the roundabout until you reach the roadway onto which you want to turn. 4. Exit: Signal, then bear right to exit the roundabout. Stop for pedestrians in the crosswalk. Multi-lane 1. Approach: Follow the lane use signs and pavement marking arrows. Get into the correct lane before entering the roundabout. Slow down to the posted advisory speed. Stop for pedestrians in the crosswalk; they have the right-of-way. 2. Enter: When entering the roundabout, yield to all circulating vehicles in both lanes. Wait for a gap and then merge into traffic in the roundabout. Traffic in a roundabout always circulates counterclockwise. 3. Proceed: Continue circling through the roundabout until you reach the roadway onto which you want to turn. 4. Exit: Signal, then bear right to exit the roundabout. Stop for pedestrians in the crosswalk.

No Passing Lines

Single Lines These single, solid yellow lines on two-lane roads indicate zones where passing is prohibited. They will be located on the right of the broken yellow line when they apply to the lane in which you are travelling in some instances, both yellow lies will be solid, indicating it is not safe for passing in either direction. Double White Lines These are double white line (dashed or solid) pavement markings on roadways that indicate where vehicles can or cannot cross to access the adjacent lane. When the double white lines are dashed, vehicles are allowed to cross over to the adjacent lane. When the double white lines are solid, lane changes are prohibited.

Lane Control Signals

Some roadways are designed to accommodate different traffic demands during the day through the use of the reversible lane system.

Stop Lines

Stop lines are white lines painted across the pavement at intersections indicating the point beyond which your vehicle should not cross if you are stopping for a traffic control device. In urban areas, the line is usually located about four feet before the crosswalk. Drivers must come to a complete stop at the stop line, when present, not at the actual stop sign or traffic signal.

Railroad Crossings

Stop within 50 feet, but not less than 15 feet, from the nearest rail of a RR crossing when any of the following apply: 1. Signal is flashing 2. Crossing gates are lowered 3. Flagman is giving signal 4. Train is approaching so closely as to create an immediate hazard 5. Train gives a warning signal and is an immediate hazard 6. Stop sign is posted After stopping, remain stopped until all tracks have been cleared and it is safe to proceed. NEVER drive through, around or under any lowered crossing gate.

Coasting

The driver of any motor vehicle, when traveling down a hill, must not coast with the gears or transmission of the vehicle in neutral.

Following Emergency Vehicles

The driver of any vehicle, other than one on official business, must not follow any fire fighting apparatus traveling in response to a fire alarm, or other emergency vehicles, closer than 200 feet, or park any vehicle within 500 feet of any fire apparatus stopped in answer to a fire alarm.

Racing

The following behaviors are considered racing on highways and streets: 1. When two or more people compete or race on any street or highway; 2. When one motor vehicle is beside or to the rear of another driver, and one driver tries to prevent the passing or overtaking of the competing driver by acceleration or maneuver; or 3. When one or more persons compete in a race against time.

Edge Lines

These are solid white lines along the side of the pavement. They serve a safety guards especially at night when it is difficult to see the edge of the road. A yellow edge line may be used on the left side to warn of narrow or raised medians.

Bicycle Lanes

These are solid white lines typically located between the farthest right traffic lane and the curb or edge of the roadway. If there is a right-turn-only lane present, the bicycle lane will be located to the left of the right-turn-only lane in order to safely accommodate bicycles traveling straight through the intersection. Bicycle lanes may also be marked with painted symbols of a bicycle. Drivers of motor vehicles are prohibited from driving or parking in the bicycle lane, except to cross over it to make a turn. When crossing over a bicycle lane to make a turn, motorists must yield to bicyclists that are present.

Lane Lines

These are the white dashes that mark the individual lanes of travel on streets and highways having more than one lane for traffic moving in the same direction. When there are four or more lanes with traffic moving in opposite directions, two solid yellow lines mark the center of the roadway. You may cross these lines only to make a left turn into or from an alley, private road, driveway, or another street. When traveling on a multi-lane road, stay in the right lane except to pass other vehicles traveling in the same direction.

Center Lines

These are used to separate traffic moving in opposite directions on paved roadways. Broken yellow lines are used when there are only two lanes and it is safe to pass in either direction.

Turn Lanes

These lanes, bordered by solid yellow and/or broken yellow lines, is in the center of many streets and highways to make left turns. A motorist desiring to turn left should proceed to the turn lane just prior to making a left turn. Georgia law prohibits the use of this lane for any purpose other than making a left turn. You may enter this lane no more than 300 feet from the location of the left turn. When a turning lane is provided for vehicles traveling in both directions, you should use extreme caution before entering the turning lane to make a left turn. There may be a vehicle traveling in the opposite direction also entering the turning lane to make a left turn. This is especially problematic in congested areas.

Traffic Striping

These markings, created by diagonal yellow lines, are on streets and highways indicating that the road is narrowing or there is an obstruction on the roadway. The area is similar to a triangle with solid yellow diagonal lines within the outside lines. Always keep to the right of these markings.

Crosswalk Lines

These white lines are painted across, or partially across the pavement. Sometimes they will be painted in a ladder pattern. When pedestrians are in the crosswalks, they have the right-of-way over motor vehicles. Crosswalks are sometimes in the middle of a block in residential areas, and in some cases, a pedestrian crossing signal is located at the white line.

Traffic Signals and Signs

Traffic signals are placed at intersections to control the orderly movement of traffic and to prevent crashes. Drivers (including bicyclists) and pedestrians must obey these signals except when an officer is directing traffic. If a traffic signal is not functioning at all at an intersection, all drivers must treat the intersection as if a stop sign is posted for all directions. If a traffic signal is malfunctioning and flashing, drivers must proceed based on the color of the flashing signal they are facing.

Green Lane Control Signal

Travel in lane.

One Way Streets

Unless directed to by a traffic control device, authorized emergency personnel or construction workers, it is unlawful for a vehicle to be driven contrary to the direction posted on a one-way street or highway, except in situations where police vehicles or authorized emergency vehicles find it necessary to do so.

Use Headlights Properly

Use high-beam headlights only when driving in rural areas and when other cars are not nearby. You must use your headlights between one-half hour after sunset to one-half hour before sunrise; at any time when it is raining; or when visibility is limited. You should dim (lower) your headlights when: 1. You are within 500 feet of an approaching vehicle so as not to blind the driver; 2. You are following closely (within 200 feet) behind another vehicle; 3. You are driving on lighted roads; 4. You are driving in rain, fog, snow, or smoke; 5. Your vision is reduced to less than 200 feet.

Octagon Signs

Used exclusively for stop signs.

Pedestrian Signals

Used to ensure the safety of people who are walking especially at busy intersections and mounted near traffic lights.

Round Sign

Used to signify a railroad crossing.

Warning Signs

Warning signs are usually yellow with black markings. They can also be fluorescent green with black markets. They alert you to conditions that are immediately ahead.

Construction and Maintenance Warning Signs

Warning signs for construction and maintenance projects are used to alert you to dangers ahead and give you enough time to adjust your speed accordingly. These signs are orange with black markings.

Diamond Signs

Warns drivers of upcoming road conditions and hazards.

The PHB remains DARK for traffic unless a pedestrian activates the push button.

What does this mean?

The double solid red signals are followed by alternating FLASHING RED signals. This requires drivers to come to a full STOP, and proceed when pedestrians have cleared the crosswalk. The signal will then go dark until activated again by a pedestrian.

What does this mean?

The flashing yellow is followed by a SOLID YELLOW signal, indication drivers should reduce speed and be prepared to stop.

What does this mean?

The solid yellow is followed by a double SOLID RED signals requiring drivers to stop

What does this mean?

When a pedestrian presses the button, the signal is activated. Approaching drives will see a FLASHING YELLOW signal for a few seconds.

What does this mean?

55 mph is the maximum speed limit permitted in this area.

What does this sign mean?

A right turn on red is prohibited, even after coming to a complete stop.

What does this sign mean?

Another road crosses the highway ahead.

What does this sign mean?

Approaching a low underpass. Do not enter if your vehicle or cargo exceeds the maximum height indicated on the sign.

What does this sign mean?

Bicycles are prohibited from entering this roadway.

What does this sign mean?

Caution - a vehicle displaying this emblem is a slow-moving vehicle. A slow-moving vehicle is defined as any vehicle moving less than 25 miles per hour. They are required by law to display this emblem.

What does this sign mean?

Curves to the right.

What does this sign mean?

Divided highway begins. Prepare to change lanes or shift lane position.

What does this sign mean?

Divided highway ends. Prepare to change lanes or shift lane position.

What does this sign mean?

Do not leave curb. Flashing - Do not leave curb, but complete walking across the street is already started.

What does this sign mean?

Drivers must stop and stay stopped when pedestrians are in the crosswalk.

What does this sign mean?

Intersection of U.S. Route 47 & Ga. Highway 38. These roads are going to cross or meet the highway you are traveling on.

What does this sign mean?

Leave the curb to cross the street.

What does this sign mean?

Left turn only

What does this sign mean?

Milepost markers are placed each mile along the edge of the roadway from one end of the state to the other. Zero always starts at the south or west border where a route begins.

What does this sign mean?

Numbers of lanes reduced ahead.

What does this sign mean?

Presence of traffic signals at intersection ahead. Slow down!

What does this sign mean?

Right turn only.

What does this sign mean?

Roadway is slippery when wet. Remember, the first half-hour of rain is most hazardous.

What does this sign mean?

Sharp turn to the right and then sharp turn to the left.

What does this sign mean?

Sharp turn to the right.

What does this sign mean?

Shoulder of the road is soft. Drive on the shoulder only in emergencies.

What does this sign mean?

Side road enters highway ahead at an angle.

What does this sign mean?

Side road enters highway ahead.

What does this sign mean?

Steep hill ahead. Slow down and be ready to shift to lower gear to control speed and protect brakes from damage.

What does this sign mean?

Straight or left turn only.

What does this sign mean?

The bridge ahead allows room for only two lanes of traffic. Approach with caution.

What does this sign mean?

The cross-buck is placed at all railroad crossings. Yield to any approaching trains. Slow down, look and listen before crossing. A sign below the cross-buck indicates the number of tracks. A complete stop is required when a red light is flashing.

What does this sign mean?

The numbers on these signs designate specific exits, interstates, or highways.

What does this sign mean?

The road you are on ends straight ahead. Slow down and prepare to yield or stop before turning right or left.

What does this sign mean?

There is a bump in the road ahead. Slow down!

What does this sign mean?

There is a dip in the road ahead. Slow down!

What does this sign mean?

There is a stop ahead. Begin to slow down and be prepared to stop.

What does this sign mean?

There is a yield sign ahead. Slow down and prepare to stop if necessary.

What does this sign mean?

These signs may be accompanied by speed advisory plaques that indicate the speed with which you should proceed.

What does this sign mean?

This marks a one-way road. If you are facing this sign traffic is coming toward you. You must not continue down the road.

What does this sign mean?

This sign is on the left side of the highway and marks the beginning of a no passing zone. Any passing maneuver must be completed before reaching this sign.

What does this sign mean?

This sign marks an officially designated bicycle route. Be cautious of bicyclists while traveling on this road.

What does this sign mean?

This sign means there is a public parking area in the direction of the arrow.

What does this sign mean?

Traffic is required to keep to the right of medians or obstructions.

What does this sign mean?

Traffic merging from the right. Prepare to allow traffic to safely merge.

What does this sign mean?

Trucks are prohibited from entering this roadway.

What does this sign mean?

Warning that you are leaving a separated one-way highway and will soon be driving on a two-way highway.

What does this sign mean?

When two or more traveling lanes are available in the direction you are traveling, slower traffic should travel in the right outside lane(s).

What does this sign mean?

Winding road ahead.

What does this sign mean?

You are approaching a one-way highway or ramp. Driving on the highway or ramp in the direction you are travelling is not allowed.

What does this sign mean?

You are approaching a school zone. A reduced speed limit is in effect when the yellow lights flashing.

What does this sign mean?

You are approaching an area where a reduced speed limit has been established.

What does this sign mean?

You cannot make a right turn at this intersection.

What does this sign mean?

You cannot turn around to go in the opposite direction at this intersection.

What does this sign mean?

You may travel only in the direction of the arrow.

What does this sign mean?

these signs alert drivers in advance of areas where animals, people, and vehicles may be crossing.

What does this sign mean?

Railroad Crossings

When a road is crossed by a railroad crossing, the pavement is usually marked with a large X and two R's. At railroad crossings, a yellow line is always placed on the right side of the center line to prevent passing. The crossing is sometimes equipped with control arms and/or emergency lights, to warn drivers of approaching trains. The driver of the vehicle must stop if warning signals indicate a train is approaching.

Stopping

When stopping or slowing down suddenly, the proper hand, arm, or brake operated stop signal must be given.

Trucks and Vehicles Pulling Trailers

When traveling upon a roadway outside of a business or residential district, drivers of trucks and vehicles pulling trailers must leave sufficient space between themselves and other vehicles of the same kind, so that the driver of an overtaking vehicle can enter and occupy the space without danger. This law prohibits the act commonly known as "caravanning." Trailers wider than 8 feet, 6 inches are not permitted on Georgia's highways.

Service Signs

While traveling along Georgia's highways, the following blue and white signs will give directions to service facilities.