Engr. 100 AutoCad Test
If the FILLMODE is set to ________, only the outlines for the new polyline will be drawn.
0
F4
3D Object Snap
The _______ Object Snap mode is used to select the projected or visual intersections of two objects in 3D space.
Apparent Intersection
F2
AutoCAD Text Window
You can use the _______ command to close the current drawing file without actually quiting AutoCAD
CLOSE
F12
Dynamic Input
F6
Dynamic UCS
The _________ option of the RECTANG command is used to draw a rectangle at a specified distance from the XY plane along the Z axis.
Elevation
A fillet cannot be created between two parallel and non-intersecting points.
False
Choose the 3-Point tool from Circle drop-down to draw a circle by specifying the two end points of the circles diameter.
False
If a circle is inserted as a rotated block, the quadrant points are not rotated by the same amount.
False
If a drawing was partially opened and saved previously, it is not possible to open it again with the same layers and views.
False
If you do not have internet connection, you cannot access the help files.
False
The layers that are turned off are displayed on the screen but cannot be plotted.
False
The start and end parameters of an elliptical arc are determined by specifying a point on the circle whose diameter is equal to the mirror diameter of an ellipse.
False
When you shift a group of objects by using the Move tool, the size and orientation of those objects will be changed.
False
While using the Windows Crossing method of object selection, only those objects that are completely enclosed within the boundaries of the crossing box are selected.
False
You can press the F3 key to display the AutoCAD text window, which displays the previous commands and prompts.
False
F7
Grid Display
The __________ button is used to set the performance of the software at an acceptable level.
Hardware Acceleration
If the _______ system variable is set to 1, the mirrored text is not reversed with respect to the original object.
MIRRTEXT
Choose the _______ tool from the Draw panel to place points at specified intervals on an object.
Measure
Choose the _______ tool from the Draw panel to draw as many points as you want in a single command.
Multiple Point
The size of a point will be taken as a percentage of the viewport size, if you enter a _______ value for the PDSIZE variable.
Negative
You can create small or large circles, ellipses, and arcs by using the _______ tool, depending on the side to be offset.
OFFSET
The offset distance is stored in the _____ system variable.
OFFSETDIST
F3
Object Snap
F8
Ortho Mode
You can change the plot style mode from the command prompt by using the ______ system variable.
PSTYLEPOLICY
The _____ option enables you to open only a selected view or a selected layer of the current drawing.
Partial Open
The ________ snap works along with polar and object tracking only.
Polar
F10
Polar Tracking
You can preview a plot before actually plotting it by using the ________ button in the Plot dialog box.
Preview
There are three types or arrays: _______, _______, and _________
Rectangular, Polar, Path
Instead of specifying the scale factor, you can use the _______ option to scale an object with reference to another object.
Reference
The _________ system variable can be used to change the time interval for automatic save
SAVETIME
The ________ command enables you to set up an invisible grid that allows the cursor to move in fixed increments from one snap point to another
SNAP
If the _________ variable is set to 1 and you invoke the New tool, the Create New Drawing dialog box will be displayed.
STARTUP
F9
Snap Mode
In ________ units you must specify the bearing angle that a line makes with the north-south direction.
Surveyor's
The ______ tool prunes the objects that extend beyond the required point of intersection.
TRIM
Choose the ______ tool from the Circle drop-down to draw a circle that is tangent to the two previously drawn objects.
Tan, Tan, Radius
You can get a _____ polyline by entering two different values at the starting width and ending width prompts.
Tapered
The ______ can be used to locate a point with respect to two different points.
Temporary Tracking
After choosing the ARC command, if you press ENTER instead of specifying the start point, the start point and direction of the arc will be taken from the endpoint and ending direction of the previous line or arc drawn.
True
By using the Single Line Text tool, you can write more than one line of text.
True
If the current drawing is unnamed and you save the drawing for the first time, the Save tool will prompt you to enter the file name in the Save Drawing As dialog box
True
If you choose the engineering or architectural format for units in the Drawing Units dialog box, you can enter distances or coordinates in any of the five formats.
True
On selecting an object after invoking the Break tool, the selection point becomes the first break point.
True
The Copy tool is used to make copies of the selected object,leaving the original object intact.
True
The drawing, in which you are working, should be in the named plot style mode (.stb) to make the plot style available in the Layer Properties Manager.
True
The grid pattern appears within the drawing limits, which help define the working area.
True
While drawing an arc by choosing the Start, Center, Angle tool, if you can enter the included angle with a negative value, an arc will be drawn in a clockwise direction.
True
You can draw a line by specifying the length and direction of the line, using the Direct Distance Entry method.
True
You can erase a previously drawn line by using the _________ option of the Line tool.
Undo
You can set the priority between the keyboard entry and the object snap through the _______ tab of the Options dialog box.
User Preferences
The ________ tool is used to enlarge or reduce the view of a drawing without affecting the actual size of the entries.
ZOOM
After increases the drawing limits, you need to choose the __________ tool from the Navigator Bar to display the complete area inside the drawing area.
Zoom All