Final 3

Which of the following symbols should be used to indicate that an interior glazing jamb shown on a floor plan is detailed on another drawing sheet?

0-0

What should be called out on a cabinet drawings to ensure a good fit next to existing construction. 1. reveals around all edges 2. spacers at cabinet backs 3. scribe pieces at cabinet edges 4. blocking where necessary

3. scribe pieces at cabinet edges

A window covering that is made from fabric and generally not intended to be opened is called A. a curtain B. an Austrian shade C. a vertical blind D. drapery

A. a curtain

If minimizing cost is a concern, which style of cabinet door and drawer construction should NOT be used? A. flush B. flush overlay C. lipped overlay D. reveal overlay

A. flush

31. Which vinyl wall covering should be recommended for the family room in a single-family dwelling? A. Type I B. Type II C. Type III D. Type IV

A. type 1

An interior designer has been retained for a building project that is currently being planned by an architect. On the second floor of the building, slate flooring over a concrete subfloor is being used. What type of installation should ideally be designed for? A.) a thick-set application using a cleavage membrane B.) a bonded thick-set installation C.) a 1/2 in. in (12) layer of mortar with the stone dry-set on top. D.) a standard thin-set installation

A.) a thick-set application using a cleavage membrane

Which of the following is NOT an effective tool for controlling moisture when detailing the area around a spa pool? A.) adhesives B.) drainage C.) flashing D.) sealants

A.) adhesives

Which of the following types of stone flooring would be the most functional choice for an entry lobby to a restaurant? A. granite with a flame finish B. marble with a honed finish C. travertine D. granite with a polished finish

A.) granite with a flame finish

What would be the very best way to ensure that the finish on the new millwork matches the finish on existing millwork on a remodeling project? A) Indicate on the drawing and in the specifications that the new work should match the existing work. B)Ask the client to find out what was used on the old job, and include that information in the specification C) Research the manufacturer and color of the existing finish, and include that information in the specification. D) Ask the painting contractor to investigate what finish was perviously used, and include that information in the finish schedule.

A.) indicate on the drawing and in the specifications that the new rock should match the existing work

When specifying the method by which two veneer pieces are to be applied, the most pleasing result is usually obtained with a A. balance match B. book match C. center match D. slip match

B.) Book match

What type of resilient flooring would be the best choice for a commercial kitchen? A. 1/8 in commercial-grade vinyl tile B. sheet vinyl C. heavy-duty cork flooring D. sheet rubber

B.) Sheet vinyl

What does the phrase "or approved equal" mean in a specification? A) The client must agree to the use of a product selected by the contractor. B) The contractor may propose substitution, but it must be approved by the interior designer. C) An alternate product may be bid on by the contractor if he or she is sure it provides the same quality as the product specified. D) The interior designer and client can permit the substitution of an alternate product if they feel it is better than the one specified

B.) The contractor may propose substitution, but it must be approved by the interior designer.

In creating drawings for paneling that will be suspended from a wall with cleats, the most important piece of information is the A.) width of each panel along the wall B.) dimension between the panel top and ceiling C.) thickness of the wood cleat D.) size of the base

B.) dimension between the panel top and ceiling

Which of the following is more legally binding? A) drawings B) specifications C) schedules D) all of the above

B.) specifications

Which carpet type allows a complex, custom-patterned carpet with varying pile heights? A. tufted B. Axminster C. Wilton D. velvet

C. WIlton

Commercial grade cabinets are most often constructed of panel products with a thickness of A.) 1/2 in B.) 5/8 in C.) 3/4 in D.) 7/8 in

C.) 3/4 in

In most situations, the application for a building permit is made by the A) building owner B) client C) contractor D) interior designer

C.) Contractor

Where is information about electrical outlets for portable lamps most likely to be found? A) furniture plan B) partition plan C) power plan D) reflected ceiling plan

C.) Power Plan

The determination of exact requirements for grab bars in toilet rooms is most appropriately made during A) programming B) schematic design C) design development D) construction drawing development

C.) design development

Important criteria for designing a lighting cove detail would include all of the following EXCEPT A.) cost B.) design intent C.) ergonomics D.) substrates

C.) ergonomics

The interior designer's best source concerning the limitations on the use of a product can be obtained from the A) building code official who inspects the product B) specialty contractor who installs the product C) manufacturer who makes the product D) trade association representing the product type

C.) manufacturer who makes the product

For the most durable wood finish, which of the following finish types should be specified? Class 3 Test Answers A. lacquer B. penetrating oil C. polyurethane D. varnish

C.) polyurethane

What is the purpose of construction element A in the following diagram of a wood floor? A.) to minimize squeaking B.) to prevent chemicals from the subfloor from contaminating the wood C.) to act as a vapor barrier D.) to provide added resiliency

C.) to act as a vapor barrier

What type of schedule would be LEAST likely to be found in a set of interior design drawings? A) finish schedule B) millwork schedule C) window schedule D) equipment schedule

C.) window schedule

The locations of return air grilles are shown on the drawings provided by A) the architect B) the interior designer C) the mechanical engineer D) both the interior designer and the mechanical engineer

D.) both the interior designer and the mechanical engineer

What is the best way for an interior designer to ensure that the exact product desired will be used in the final design? A) Show the configuration of the product on the drawing, and call it out specifically. B) Write a closed, descriptive specification C) Require that the contractor submit samples before purchasing D) list the information in a proprietary specification

D.) list the information in a proprietary specification

When reviewing a detail of a gypsum wall board niche to recieve a built-in millwork cabinet, the interior designer should be most concerned with A) clearance B) connection C) movement D) tolerance

D.) tolerance

Which of the following would be the LEAST desirable choice for a carpet installation for hotel rooms that have concrete subfloors? A.) nylon carpet attached in over a foam cushion B.) polyester carpet stretched in over felt cushion C.) acrylic carpet direct-glued D.) wool carpet direct-glued

D.) wool carpet direct-glued

The symbol shown is used to indicate what type of control?

a light controlled from two locations

A 216 pitch carpet has A. a pile height that is almost 1/4 in high B. 8 surface yarns per inch C. an equivalent gauge of 1/6 D. a commercial-grade stitch rat

b. 8 surface yarns per inch

To minimize conflicts in the contract documents, what is LEAST important action the interior designer can take? A) Show only dimensions on the drawings. B) Have someone check the drawings before they are issued C) Write the specifications after the drawings are essentially complete. D) Make sure terminology in the specifications is the same as in the drawings.

b. have someone check the drawings before they are issued

Which method of veneer cut results in the straightest grain possible from most species of trees? Class 3 Test Answers A. half-round slicing B. quarter slicing C. flat slicing D. rotary slicing

b. quarter slicing

1. The flame-spread rating of wood panel wainscoting must be A. a minimum of Class A B. class B if the wainscoting takes up more than 10% of the wall area C. nothing, because it is not regulated D. based on location and occupancy

based on location and occupancy

Before preparing construction documents, the interior designer should verify if any particular types of lighting fixtures are required by coordinating with

building owner

Which of the following would NOT be found in the project manual? A) performance bond B) testing requirements C) cost estimate D) instructions to bidders

c. cost estimate

Where would application instructions for vinyl wall covering be found? A) Part 1 of Section 097200, Wall Covering B)in Part 2 of Section 097200, Wall Covering C) in Part 3 of Section 097200, Wall Covering D) in a finish schedule at the end of Section 097200, Wall Covering

c. in part 3 of section 097200, wall covering

The use of particle board as part of a constuction detail should be carefully evaluated in terms of the particleboards a. availability b. permeability c. strength d. VOC content.

d. Voc Content

When specifying a specialty flooring material, the interior designer can obtain unbiased information on the hazards of a cleaning agent, required for maintenance, for the A.) cleaning agent manufacturer B.) Environmental Protection Agency C.) flooring manufacturer D.) material safey data sheet

d.) material safety data sheet

Who is responsible for verifying that recessed downlights do not interfere with ductwork shown on the mechanical plans. A)mechanical engineer B) electrical engineer C) interior designer D) architect

interior designer

Who would be LEAST involved in the selection of an underfloor raceway system? A) electrical consultant B) structural engineer C) architect D) mechanical consultant

mechanical consultant

A slip joint at the top of a partition is required to account for

movement

What symbol is used to indicate a floor-mounted telephone outlet?

o & carrot

The full extent of slab-to-slab partitions on a project is BEST shown on 1. the reflected ceiling plan 2. the interior elevations 3. wall section 4. the finish plan

reflected ceiling plan

Specification scan be made most concise by A) using refernce standard specifications B)avoiding the use of words like a, the, and all C) using phrases instead of complete sentences D) using descriptive specifications

using reference standard specifications