Final Assessment
What are the four types of physical hazards?
Physical hazards include noise, temperature extremes, radiation, and vibration.
What requirements must exit routes meet?
1. Exit to an outside area 2 Be sufficient for the number of people needing to exit during an emergency 3. Adequately signposted 4. Be sufficiently large 5. Be unlocked
What are the different types of guards?
1. Interlocked 2. Fixed 3. Self-Adjusting 4. Adjustable
What are chemical manufacturers required to provide to anyone who purchases or uses their chemicals for a work purpose?
1. Labels 2. Safety Data Sheet
We know that lifting heavy loads can cause injury. What other actions can cause injury?
1. Lifting in an awkward position 2. Lifting moderate or higher loads repetitively
What does OSHA require employers to construct and install to minimize electrocution hazards?
1. Lighting found throughout the building 2. Appliances such as freezers or refrigerators 3. Switches used with generators 4. Controls on equipment and machinery in the workplace
What should you be prepared to do if workplace violence occurs?
1. Manage the situation 2. Endure the situation
What are the three main areas of a machine?
1. The point of operation 2. The power transmission device 3. The operating controls.
How old must you be to operate a forklift?
18
As an employee, who is supposed to provide training on the chemicals you are handling or come in contact with at work?
Employer
Who is responsible for making sure that PPE fits each worker properly?
Employer
Who is responsible for training workers on the use of PPE?
Employer
How frequently should you take breaks when driving long distances?
Every two hours
What usually results from slips and trips?
Fractured and broken bones
Tina reported a safety hazard at her workplace to OSHA. Representatives from OSHA came to her work and inspected the issue, then gave her employer a citation. The day after Tina's employer received the citation, Tina was given new jobs which were menial and difficult. Which of Tina's rights under OSHA was violated in this situation?
Freedom from retaliation for exercising health and safety rights.
Why is understanding the risks and hazards associated with fires important?
It prevents accidents from occurring in the first place.
What's the best way to find the load capacity of a crane?
Look at the load capacity chart in the cab.
Are chemical hazards always visible?
No
What is required before using a respirator?
Proper training on respirators.
A good posture is one that places the least amount of _______ on your muscles and joints.
Stress
Some overhead power lines have a protective covering that them from exposure to the elements. However, the covering does not protect workers from electrocution. If you touch a power line, covered or bare, death is probable. True or false?
True
One way of reducing fall hazards is to keep floors clean and dry. What else can be done to reduce the hazard?
Use non-slip material on floors.