Final Exam (1,2,3,4)

Pataasin ang iyong marka sa homework at exams ngayon gamit ang Quizwiz!

If the blade of an axe is too thick, regardless of its sharpness:

It will be difficult to drive the axe head through ordinary objects

Residential fire and life safety surveys should be conducted

In teams of two or more firefighters

Power tools should be started:

In the area where the work will be performed

What information should be included when broadcasting information on emergencies to department members

Information from the caller and from preincident plans

Clean agents extinguish fire by: (672) [4.3.10] removing oxygen from the compartment. removing the burning fuel. cooling the burning material. Interrupting the combustion reaction.

Interrupting the combustion reaction.

Which NFPA standard covers wildland fire fighter profressional qualifications

1051

Aerial fuels are at least __ above the ground

6 ft (2m)

Which tool was developed to force entry on locks with protective collars or cone-shaped covers?

A-tool

Which type of hose fitting would be used to connect two male couplings or two female couplings to each other? (601) [4.3.15] Wye Adapter Siamese Reducer

Adapter

In which scenario would the IC likely communicate the need for a transition from a defensive attack strategy to an offensive interior attack strategy?

Additional personnel and apparatus arrive on scene

What is the purpose of lugs on a fire hose coupling

Aid in tightening and loosening connections

Which of the following actions should be taken immediately when MAYDAY is broadcast? (469) [4.2.4, 4.3.5] All radio traffic ceases and only traffic relating to the MAYDAY is allowed. Personnel near the downed firefighter should proceed to assist with rescue. All assigned units are directed to assist with searching for the firefighter who has broadcast the MAYDAY. The MAYDAY crew is dispatched to locate the downed firefighter.

All radio traffic ceases and only traffic relating to the MAYDAY is allowed.

How are vehicle door and roof posts normally identified?

Alphabetically from front to rear

Which is an apparatus requirement in NFPA 1500?

Apparatus must be designed to include seat belts for all occupants

Which extinguisher would be effective for use on a burning puddle of gasoline at a vehicle incident? (261) [4.3.16] Aqueous film forming foam (AFFF) extinguisher Stored-pressure water extinguisher Clean agent extinguisher Dry powder extinguisher

Aqueous film forming foam (AFFF) extinguisher

When selecting tools to perform forcible entry, firefighters must select the tool that:

Is most appropriate for the task at hand

The water supply for sprinkler systems

Is often designed to supply only a portion of the sprinklers

According to NFPA 1962, fire hose should be service tested within 90 days before being placed in service for the first time and then:

At least once a year

The majority of ground cover fires are extinguished with which item

Backpack pump

Which heavy-duty rescue tool is usually used to support collapsed structural members?

Bar screw jack

What is one of the 10 standard wildland firefighting orders

Base all actions on current and expected fire behavior

When receiving a call from someone who is angry or upset:

Be pleasant and take necessary information

When performing forcible entry, it is important to:

Be sure that other personnel are out of the immediate area

Which type of roof supports are sections of lumber that are located directly under the roof decking?

Beams

Partial or total structural collapse could be a direct result of:

Breaching a load-bearing exterior wall of a fire-weakened structure

What should the acting Incident Commander do immediately after transmitting the arrival report?

Communicate the incident action plan to on-scene personnel

Which is a component of the LCES technique for situational awareness at ground cover fires? (714) [4.3.19] Lightning Exposures SCBA Communications

Communications

Which duty would likely be assigned to a Fire Fighter I

Conduct search and rescue operations as part of a team

In most jurisdictions, residential fire and life safety surveys are

Conducted on a voluntary basis

In most jurisdictions, residential fire and life safety surveys are a. Listen actively, resolve the issue if possible, or refer them to someone who can help them if you cannot b. About the people who live and work in their community c. Conducted on a voluntary basis d. To determine what hazards and what types of safety equipment are within the home

Conducted on a voluntary basis

What should be the first priority of firefighters when there are downed high-voltage power lines

Contact the electric company to shut off power

What should be done if a patient begins to exhibit signs of shock? (1041) [6.2.1] Do not take action until an EMT or paramedic arrives Try to cool the patient down Control bleeding and maintain body temperature Provide the patient with food and water

Control bleeding and maintain body temperature

Which is true when preserving the fire scene? (756) [4.3.8, 4.3.14] Control of evidence must be maintained as part of the chain of custody. Once the fire has been extinguished, firefighters must leave the scene so that fire investigators can preserve evidence. Evidence should be moved to a central location as quickly as possible to facilitate efficient investigation. A Fire Fighter I is qualified to preserve evidence and to determine the cause of the fire in arson incidents.

Control of evidence must be maintained as part of the chain of custody.

What is slash

Debris from logging or clearing operations

What is a consequence of falling relative humidity

Decreased fuel moisture

On which basis are wildland fuels classified

Diameter

Which type of wildland fire attack is made on the fire's burning edge

Direct

Which statement describes two-way couplings?

Do not have male and female threads

Which item would likely be found in the fire command center in a large building

Fire alarm control panel

Which statement regarding apparatus safety is accurate?

Firefighters should always maintain three points of contact when mounting or dismounting apparatus

Which window component is also known as glazing?

Glass

The most rapidly moving part of a wildland fire if the

Head

Which fuel classification includes large brush

Heavy

The ______ on a coupling is a flattened angle at the end of the threads that helps prevent cross-threading when connecting couplings

Higbee cut

Never use a power saw:

In a flammable atmosphere

Because of how it is spread, ______ is prevalent in high-density living areas such as nursing homes and prisons. (1024) [6.2.1] HINI Tuberculosis AIDS Hepatitis B

Tuberculosis

Which type of lock commonly found in residential applications has a single-cylinder and is mounted above the door knob?

Tubular deadbolt lock

What is the minimum number of firefighters required to operate an attack line for interior structural operations? (625) [4.3.10] One Four Two Three

Two

Which type of communications center equipment would be used for communications at an emergency scene

Two-way radio system

Which federal government agency manages wildland incidents occurring on federal lands

U.S. Forest Service

For which vehicle frame are the vehicle's stress-bearing elements and sheet metal body parts built as one unit?

Unibody

Everyone at an emergency scene should follow two basic communications rules, the first of which:

Units or individuals must identify themselves in every transmission

Each employee reporting to just one supervisor, who in turn moves up the chain of command, as an example of

Unity of command

How can a 41/2-inch (115 mm) intake hose be connected to a 2 1/2 -inch steamer (65 mm) connection on the hydrant? Use a reducer coupling Attach a gate valve Attach a water thief appliance Use a two-way coupling

Use a reducer coupling

When presenting a fire safety message

Use positive statements to tell the audience what to do instead of what not to do

When presenting a fire safety message a. They provide a goal or purpose for the lesson b. Role play or videos about risky behaviors c. Provides a road map for a variety of people to teach the lesson and ensure that all topics are covered d. Use positive statements to tell the audience what to do instead of what not to do

Use positive statements to tell the audience what to do instead of what not to do

Which is an unsafe action that an cause injuries to firefighters?

Using a cutting tool to cut a material for which it was not designed

Which would be an example of mechanical ventilation? (506) [4.3.11, 4.3.12] Using fans or ejectors Opening doors or windows Using water streams Allowing smoke to exit without intervention

Using fans or ejectors

Which organization or agency assists the fire department by shutting off natural gas lines, electricity, or public water mains

Utility company

Who is in charge of turning building utilities back on after fire fighting operations are complete? (688) [4.3.18] Utility company personnel Incident Commander Fire Fighter I Building owner or manager

Utility company personnel

What is the first step of an extrication operation?

Vehicle incident size-up

When establishing scene control zones at an emergency scene, firefighters should avoid tying rope or caution tape to

Vehicles

Which type of bleeding is characterized by a dark, steady flow of blood from a wound and is reasonably easy to control? (1038) [6.2.1] Arterial bleeding Internal bleeding Capillary bleeding Venous bleeding

Venous bleeding

Why must ventilation crews always know the location of interior attack crews?

Ventilation crews can take actions that change the flow path and endanger interior crews

If a door is opened, a structure's ____ will change, which may cause the fire to grow

Ventilation profile

What must be done when shutting down a dry-barrel hydrant? (593) [4.3.15] Request help from the hydrant manufacturer Leave at least 10 percent of the water in the hydrant Verify that all of the water drains out Request help from a hydrant technician

Verify that all of the water drains out

Which type of door is often used as a loading dock door?

Vertical door

Which type of salvage cover is lightweight and practical for indoor or outdoor use, but is prone to melting when used to cover hot objects? (747) [4.3.14] Cotton duck Canvas Vinyl Metal

Vinyl

Which activity should not be allowed during a fire station tour

Visitors exploring the station on their own

Which activity should not be allowed during a fire station tour a. Visitors exploring the station on their own b. Teach students that the firefighter is a friendly helper c. Ensure that the children are only allowed to handle clean PPE d. Use positive statements to tell the audience what to do instead of what not to do

Visitors exploring the station on their own

What condition often found in Type III construction buildings is likely to negatively influence fire behavior?

Void spaces between wall studs

One way that firefighters can maintain situational awareness at a highway/roadway incidents is to

Walk facing the oncoming traffic

Which type of sprinkler control valve extends horizontally through the wall with the target and valve operating nut on the outside of the building? (687) [4.3.14] Wall post indicator valve (WPIV) Post indicator valve (PIV) Outside screw and yoke valve (OS&Y) Post indicator valve assembly (PIVA)

Wall post indicator valve (WPIV)

Which type of collapse is common for a Type V construction building? Select one: a.Balloon collapse b.Walls collapsing inward c.Collapse of a single compartment d.Walls collapsing in one piece or crumbling Feedback

Walls collapsing inward

In order to prevent or limit chemical exposures at fires, firefighters should

Wash hands and neck skin immediately after working a fire

Fiberglass tool handles should be maintained by:

Washing with a mild detergent

How can water from fire suppression affect a building's structural stability? Select one: a.Water has minimal effect on a structure's stability. b.Water adds weight, but does not add stress to the structure. c.Water weight added from suppression can cause floors to collapse. d.Water has a positive impact on stability since it reduces the structure's fuel load. Feedback

Water weight added from suppression can cause floors to collapse.

Which action does NFPA 1500 prohibit while riding in apparatus on the way to an incident

Wearing helmets

A _____ sprinkler system contains water under pressure in the piping and is used in locations where temperatures remain above 40 degrees Fahrenheit

Wet-pipe

A _____ sprinkler system contains water under pressure in the piping and is used in locations where temperatures remain above 40 degrees Fahrenheit a. Chemical Pellet b. Is often designed to supply only a portion of the sprinklers c. Post indicator Valve (PIV) d. Wet-pipe

Wet-pipe

Which should be continually evaluated for size-up?

What resources will be needed to resolve the situation

What should be used to prevent horizontal movement of a vehicle with all wheels on the ground?

Wheel chocks

When would a fire hose be tagged for repair? Select one: a. When any damage is found, whether it can be corrected or not b. When it has been in service more than three years c. When it has been in service more than one year d. When defects are found that can be corrected

When defects are found that can be corrected

Which statement accurately describes organic damage to fire hose?

When natural fiber hose is stored wet, it is at risk of mold and mildew damage

Which statement describes the factor that MOST influences compartment fire development? (145) [4.3.11] Whether the fire is fuel-limited or ventilation-limited Whether the fuel is cellulose-based or petroleum-based Ratio of square footage to ceiling height of the compartment Ambient temperature and wind speed outside the compartment

Whether the fire is fuel-limited or ventilation-limited

Which search method employs the use of markers such as knots at regular intervals along the search line to indicate distance from the beginning of the search line? (461) [4.3.9] VEIS method Oriented-search method Wide-area search method Self-evacuation method

Wide-area search method

Which fire fighting personnel are trained specifically to extinguish fires in outdoor vegetation

Wildland firefighter

Which term means areas where undeveloped land with vegetative fuels is mixed with human-made structures

Wildland-urban interface

Interior fire doors:

Will not lock in place when closed

Which statement about ventilation and wind considerations is MOST accurate? (164) [4.3.11] Wind can increase the pressure inside the structure, driving smoke and flames into unburned portions of the structure and onto advancing firefighters. Unplanned ventilation is most likely to occur in structures undergoing construction or renovation. The source of new oxygen always originates from outside the building. Unplanned ventilation occurs when an occupant or bystander interferes with coordinated fireground activities and introduces a new source of oxygen to the fire.

Wind can increase the pressure inside the structure, driving smoke and flames into unburned portions of the structure and onto advancing firefighters.

Which describes a crown fire? (710) [4.3.19] Wind-driven, high-intensity fire that moves through the tree tops Smoldering fires that can go undetected for months before they start flaming Slow-moving, crawling fire in low-lying grass and vegetation Fast-moving fires in surface fuels such as moss and grass clippings

Wind-driven, high-intensity fire that moves through the tree tops

What action should be taken if an entire extinguisher is discharged but the fire is not extinguished? (268) [4.3.16] Withdraw and reassess the situation Try to use a different class of fire extinguisher Notify a supervisor and stand by for further instruction Wait a moment and try another extinguisher of the same class

Withdraw and reassess the situation

Which type of building material is affected by size and moisture content during fire conditions? Select one: a.Glass b.Wood c.Masonry d.Concrete

Wood

Which tool or piece of equipment is commonly used to stop the flow of water from an activated sprinkler? (687) [4.3.14] Wooden wedges Halligan tool Pike pole Spanner wrench

Wooden wedges

Which method is used to quickly and easily advance charged hoselines at ground level? (607) [4.3.10] Minuteman line drag Triple layer line drag Accordion line drag Working line drag

Working line drag

Which is an increased risk of performing vertical ventilation? (514) [4.3.12] Remaining in the fire compartment Personnel must stay on the roof after operations Hoselines are not in place Working on peaked and flat roof surfaces

Working on peaked and flat roof surfaces

Which appliance has one female inlet and multiple male outlets to divide one supply hoseline into two or more hoselines? (600-601) [4.3.15] Wye appliance Gate valve appliance Water thief appliance Siamese appliance

Wye appliance

A ladder belt is designed to: Select one: a.secure a firefighter to a ladder while they are working from the ladder. b.be worn around a firefighter's waist to carry tools or equipment up the ladder. c.make it easier to raise the fly of an extension ladder. d.secure a firefighter who is heeling the ladder to the ladder beams.

a

A metal snap link that is used to connect ropes to other mechanical gear is called a: Select one: a.carabiner. b.hitch. c.pulley. d.winch cable.

a

Airborne pathogens may cause illness through inhalation or: Select one: a.direct contact. b.absorption. c.ingestion. d.adsorption.

a

An overhand safety knot: Select one: a.can be used to keep the running end of the rope from slipping through the first knot that is tied. b.must always be used in conjunction with another knot in order to be effective. c.is not used in the fire service because of its ineffectiveness. d.is the best knot to use for hoisting and rescue operations.

a

Braid-on-braid rope is usually used: Select one: a.as utility rope. b.for rescues where long falls are not possible. c.for rescues where long falls are possible. d.as life safety rope.

a

Fire fighting boots must be: Select one: a.high enough to protect the lower leg. b.made completely of reinforced leather. c.made completely of high-grade rubber. d.low enough to expose the ankles.

a

How can a firefighter safely maintain constant hand contact with the ladder when carrying tools? Select one: a.Slide the free hand along the beam b.Use the rungs to balance the tools while ascending the ladder c.Cradle the tool in the arm, maintaining contact with the ladder d.Use a ladder belt to carry the tool

a

How do controlled breathing techniques benefit firefighters? Select one: a.Slows breathing and extends the time it takes to deplete air in the SCBA cylinder b.Provides a buffer so that evacuation is not necessary immediately after the low air alarm sounds c.Reduces incident time and cost because SCBA cylinders do not need to be refilled d.Allows firefighters to increase breathing rate if injury or panic occurs

a

How should a pike pole be hoisted? Select one: a.Pike pointing up b.Secured to the ladder c.Pike pointing down d.Attached to another tool

a

Immediately prior to donning SCBA, firefighters should: Select one: a.check the cylinder gauge to make sure the cylinder is full. b.record inspections in the SCBA log. c.check to make sure that the bypass valve is disabled. d.perform a hydrostatic test on the cylinder. Feedback

a

In order for life safety rope to be reused in life safety situations, it must NOT be: Select one: a.exposed to heat or direct flame. b.the same color as utility rope. c.made of block creel construction. d.stored in apparatus compartments.

a

In order to avoid contact burns and heat stress after leaving a heated environment, firefighters should: Select one: a.follow rehabilitation protocols and allow clothing to cool. b.thoroughly inspect PPE to check for damage. c.make sure that the protective trousers and coat do not overlap. d.place contaminated PPE in the cab of the apparatus.

a

In order to avoid contaminating living quarters, _____ should NOT be worn during emergency operations. Select one: a.station footwear b.steel-toed boots c.synthetic materials d.cotton underwear

a

In order to be as visible to motorists as possible during roadway incident operations, firefighters should wear: Select one: a.high-visibility vests. b.bright orange helmets. c.flame-retardant jumpsuits. d.structural PPE with reflective trim.

a

In order to safely lift a ground ladder, it is important: Select one: a.to lift on command of a firefighter who can see the entire team. b.for all firefighters to be on the same side of the ladder. c.for each firefighter on the team to lift one at a time. d.to have two firefighters per section of ladder.

a

Seat-mounted SCBA: Select one: a.allow firefighters to don the SCBA while still inside the apparatus. b.makes it more difficult for firefighters to check equipment. c.ensures that SCBA are donned properly every time. d.require that firefighters be breathing cylinder air while en route to the incident.

a

The SCBA backplate and harness assembly: Select one: a.is used to hold the breathing air cylinder. b.contains the speaking diaphragm. c.is only found on certain SCBA models. d.contains the heads-up display unit. Feedback

a

The end-of-service-time indicator (EOSTI): Select one: a.uses an audible alarm and flashing light or vibration to warn the wearer that the air supply is almost depleted. b.is a gauge on the facepiece that shows the wearer how much breathing air is left in the SCBA cylinder. c.is used to assess dangerous conditions in the emergency scene environment and determine the need for SCBA. d.is a series of lights in the SCBA facepiece that indicate when it is safe to work in the atmosphere without SCBA. Feedback

a

To ensure that rope stays in good working condition, it is important to: Select one: a.avoid abrasion and unnecessary wear. b.clean the rope with strong chemicals to remove oil and grease. c.always coil and uncoil the rope in the same direction. d.paint the ends of the rope.

a

Tying in a ground ladder involves: Select one: a.using a rope hose tool or safety strap to secure the ladder to a stationary object. b.standing at the bottom of the front ladder and pushing the ladder toward the building. c.using a ladder belt to secure the ladder to a stationary object. d.standing beneath the ladder and pulling the ladder toward the building.

a

What is a general guideline for donning an SCBA facepiece? Select one: a.Center the harness at the rear of the head. b.Leave a gap between the facepiece and skin to allow fresh air to circulate. c.Connect the regulator to the facepiece prior to donning. d.Ensure that the protective hood is worn underneath the facepiece straps.

a

What is an effective way to protect yourself from the health hazards caused by inhaling smoke and other products of combustion? Select one: a.Wear respiratory protection b.Schedule annual physical exams c.Eat a healthy diet d.Exercise daily

a

What is the best way to store rope? Select one: a.A nylon or canvas storage bag b.On reels outside the station c.In an apparatus compartment d.An open-air carrying case

a

What is the primary type of respiratory protection used in the fire service? Select one: a.Atmosphere-supplying respirator (ASR) b.High-efficiency particulate air filter (HEPA) c.Air-purifying respirator (APR) d.Closed-circuit breathing apparatus (CCBA)

a

What marking or label does NFPA 1931 require to be on all ladders? Select one: a.Manufacturer's name plate b.Reflective white tip c.Recommended end of service date d.Balance point stripe

a

What should be done if an article of protective clothing is damaged beyond repair? Select one: a.It should be removed from service and destroyed. b.It may be traded in for a newer model of the same item. c.It should be returned to the manufacturer for repairs. d.It may be worn until a replacement can be purchased.

a

What should be done if inspection on laid rope reveals that one rope has rot? Select one: a.Remove all surrounding ropes from service, then clean and reinspect them. b.Clean the rotten rope and return the entire rope to service. c.Cut off the rotten area of the rope before returning the remainder to service. d.Remove the rotten rope and all surrounding ropes from service and destroy them.

a

What should life safety rope be used for at a rescue incident? Select one: a.Lifting victims and rescuers b.Laying a search line c.Establishing a perimeter d.Stabilizing tools being hoisted

a

What should you do if you experience symptoms of oxygen deficiency such as light-headedness or loss of coordination? Select one: a.Report symptoms and immediately evacuate the area b.Continue working until your low air alarm goes off c.Check to make sure your SCBA isn't malfunctioning d.Wait in place until a rescue team can assist you

a

When an extension ladder is in the bedded position, the halyard cable should be: Select one: a.pulled taut. b.left hanging freely. c.tied to the tie rods. d.supported by the pawls.

a

When exiting an IDLH environment, it is important to: Select one: a.use the same path that you used to enter. b.turn on the bypass valve just prior to exiting the environment. c.turn off SCBA just prior to exiting the environment. d.use a different path than the one you used to enter.

a

Which is the preferred knot for joining two pieces of webbing together? Select one: a.Water knot b.Half hitch c.Figure-eight d.Clove hitch Feedback

a

Which situation would likely be granted an exception to the rule that prohibits filling an unshielded air cylinder while a firefighter is wearing the SCBA? Select one: a.A rapid intervention crew (RIC) is rescuing a trapped or incapacitated firefighter. b.A firefighter with a higher rank than the firefighter wearing the SCBA cylinder is available to perform the refill. c.The firefighter filling the empty cylinder is wearing full structural personal protective equipment. d.The SCBA was manufactured within the past five to ten years.

a

Which statement about inspecting PPE is accurate? Select one: a.PPE must be inspected at the start of every shift and after every use. b.Individual firefighters determine their own PPE inspection schedule and guidelines. c.PPE must be inspected during rehabilitation for incidents lasting more than two hours. d.PPE that is not used in fire fighting incidents or live fire training can be exempt from routine inspections.

a

Which statement describes the function of an auto-cascade system? Select one: a.Completely automated fill station that fills air cylinders to a programmable pressure b.Equipment that supplies an endless source of breathing air within the upper floors of a structure c.Equipment specifically designed to fill supplied air respirators (SAR) or a firefighter breathing air replenishment system (FBARS) d.Fill station designed to refill air cylinders during emergency events

a

Which type of cleaning can be done at an incident scene by brushing off loose debris and rinsing the PPE? Select one: a.Routine cleaning b.Contract cleaning c.Advanced cleaning d.Specialized cleaning

a

While on duty, firefighters should avoid wearing: Select one: a.clothing made of non-fire-resistant synthetic materials. b.high-top shoes. c.short-sleeved shirts. d.clothing made from 100 percent cotton.

a

Who generally places the ladder the correct distance from the building and is in charge of voicing commands when two firefighters work together to raise a ladder? Select one: a.The heeler b.A third firefighter nearby c.A company officer d.The firefighter at the tip

a

he _____ is the rope or cable used to raise the upper sections of an extension ladder. Select one: a.halyard b.pulley c.guide line d.pawl

a

When attacking a passenger vehicle fire,: (696) [4.3.7] a 2 1/2-inch (65 mm) or larger hoseline is required. firefighters should extinguish fire in the engine compartment first. a backup hoseline should be deployed as quickly as possible. firefighters should approach from downhill and downwind.

a backup hoseline should be deployed as quickly as possible.

A primary search is: (456) [4.3.9] a slow, thorough search conducted after the fire is under control. performed by one person. a fast, thorough search performed either before or during fire suppression operations. not the time to rescue victims.

a fast, thorough search performed either before or during fire suppression operations.

Observed from the exterior, a high neutral plane may indicate that the fire is in the early stages of development, or could indicate: (155) [4.3.11, 4.3.12] a fire above your level. a fire in decay stage. that the fire is reaching backdraft conditions. that the compartment has not yet ventilated.

a fire above your level.

Rippled wallpaper and peeling paint are possible indicators of: (743) [4.3.10, 4.3.13] immediate threat of flashover. impending structural collapse. a fire hidden behind a wall. arson.

a fire hidden behind a wall. arson.

A "MAYDAY" is called when: (467) [4.2.4, 4.3.5] there is a partial roof collapse. hazardous materials are found in a structure. a firefighter is in immediate danger. unconscious victims are located.

a firefighter is in immediate danger.

Trash container fires are likely to be fought using Class A foam or: (707) [4.3.8] Purple K. a master stream. Halon. Class B foam.

a master stream.

For a fire scene to be secure, it needs to have: (758) [4.3.8, 4.3.14] perimeter markings at least every ten feet. a recognizable perimeter with someone assigned to maintain the perimeter. perimeters that are marked differently for each varying level of access. a specialized team of law enforcement personnel assigned to protect it.

a recognizable perimeter with someone assigned to maintain the perimeter.

Which statement describes risk assessment?

a risk assessment is conducted initially and then is ongoing throughout the incident

Which factor is important when selecting the appropriate foam proportioner to use? Select one: a.Available water pressure b.Stage of fire development c.Weather conditions d.Terrain in the fire area

a. Available water pressure

Which method of foam application would be well suited for a flammable liquid spill near the exterior wall of a building? Select one: a.Bank-down method b.Roll-on method c.Rain-down method d.Spread-over method

a. Bank-down method

Which type of foam proportioner is directly attached to the pump panel outlet or connected at some point in the hose lay? Select one: a.In-line eductor b.Foam nozzle eductor c.Apparatus-mounted proportioner d.Compressed air foam system (CAFS)

a. In-line eductor

What is a disadvantage of using fog nozzles to apply fire fighting foam? Select one: a.Operator error is more likely to produce lower quality foam. b.They are specialty nozzles that are not widely available on most apparatus. c.They are not as versatile as foam nozzles. d.They provide a limited reach compared to other nozzles.

a. Operator error is more likely to produce lower quality foam.

What is an advantage of using a foam nozzle to apply fire fighting foam? Select one: a.Produces higher quality foam than a fog nozzle b.More widely available than a fog nozzle c.More versatile than a fog nozzle d.Longer reach than other nozzles

a. Produces higher quality foam than a fog nozzle

Which method of foam application is only suitable for use on a pool of liquid fuel on open ground? Select one: a.Roll-on method b.Rain-down method c.Bank-down method d.Spread-over method

a. Roll-on method

In order to prevent reignition of a liquid fuel fire after foam has been applied, do NOT: Select one: a.apply a solid or straight stream of water to the foam blanket. b.apply more foam than necessary for extinguishment. c.add any more foam after the surface has been covered once. d.let the foam sit for more than 5-10 minutes without replenishing it.

a. apply a solid or straight stream of water to the foam blanket.

Which extinguishment method involves foam creating a barrier between the fuel gases and any possible ignition sources? Select one: a.Separating b.Penetrating c.Smothering d.Cooling

a.Separating

High-quality foam bubbles are created through the process of: Select one: a.aeration. b.expansion. c.saponification. d.separation.

a.aeration.

Fog nozzles can be used with foam solution to produce: Select one: a.low-expansion, long-lasting foam. b.high-expansion, short-lasting foam. c.low-expansion, short-lasting foam. d.high-expansion, long-lasting foam.

a.low-expansion, long-lasting foam.

Under fire conditions, a green roof can:

accelerate structural failure due to the increased dead load.

When the first firefighter arrives on scene, he or she would

act as the incident commander and establish command

When operating a portable fire extinguisher,: (267) [4.3.16] aim the nozzle at the base of the fire. aim the nozzle at the top of the fire. move the nozzle around in the circular pattern. move the nozzle up and down near the center of the fire.

aim the nozzle at the base of the fire.

When placing a master stream device,: (628-631) [4.3.10] aim the stream so that it enters the building horizontally. aim the stream so that it deflects off the ceiling or overhead objects. always use at least four firefighters to transport the appliance. always use at least three firefighters to transport the appliance.

aim the stream so that it deflects off the ceiling or overhead objects

The AHJ should establish action levels that describe how firefighters should respond to high- or low-level alarms while performing: (448) [4.3.21] MAYDAY training. forcible entry. ventilation. air monitoring.

air monitoring.

Which scenario would prompt the Incident Commander to choose a defensive fire attack?

amount of fire exceeds available trained personnel and available resources at the scene

In most compartment fires, the energy release in fire is directly proportional to the: (140) [4.3.11] amount of oxygen available for combustion. thermal conductivity of the fuel. ambient temperature of the environment. amount of fuel available for combustion.

amount of oxygen available for combustion.

With regard to local building codes, firefighters should be aware that:

an AHJ can amend model building codes to meet local needs.

In a third-service EMS system, medical services are typically provided by: (1022) [6.2.1] a local hospital. a mixture of fire department personnel and hospital staff. an organization that is completely separate from the fire department. fire department personnel.

an organization that is completely separate from the fire department.

Fires involve a heat-producing chemical reaction between fuel and: (117) [4.3.11] an oxidizer a catalyst free radicals a reducing agent

an oxidizer

When establishing collapse zones,: Select one: a.apparatus must not be positioned in the collapse zone. b.interior crews should be allowed to finish tasks before exiting the structure. c.the size of the collapse zone depends on the width of the building. d.the IC should wait to cordon the zones off until an offensive strategy has been adopted.

apparatus must not be positioned in the collapse zone.

Water absorbs heat and converts to steam most rapidly when it is: (614) [4.3.10] discharged from a straight tip nozzle. discharged from a smooth bore nozzle. applied in a fog pattern. applied as a straight stream.

applied in a fog pattern.

What should the attack crew do if the front door is opened and fast moving smoke and air indicate that the fire is active in the area?

apply water to the hot gas layer, wait, then observed changes before entering

A(An) _____ roof is often found on buildings that require a large open area to be covered without being supported by pillars or columns.

arched

Gaseous fuels can be the most dangerous of all fuel types because they: (137) [4.3.10, 4.3.11] are already in the physical state required for ignition. are the most commonly encountered form of fuel. can quickly change into a liquid or a solid fuel. will sink and collect in low areas.

are already in the physical state required for ignition.

Firefighters can face civil and criminal penalties if they: (1022) [6.2.1] are noncompliant with HIPAA's rules about distribution of protected medical information. share a patient's medical information with the patient's physician. share a patient's medical information with other emergency personnel on scene. get a patient's consent before distributing the patient's protected medical information.

are noncompliant with HIPAA's rules about distribution of protected medical information.

When you are seeking to escape and you locate a window, you should: (472) [4.2.4, 4.3.5] break the window glass using heavy furniture in the room. use an escape rope to descend from the window. ask Command if opening the window will make interior conditions worse. break the glass and lower yourself to the ground head first.

ask Command if opening the window will make interior conditions worse.

When ventilating shingle-covered pitched roofs, always cut the exhaust openings: (519) [4.3.12] at or very near the highest point of the roof, when possible. as close to an egress point as possible. at or very near the lowest point of the roof, when possible. near the center of the roof.

at or very near the highest point of the roof, when possible.

Power tools should be inspected: Select one: a. at the beginning of every shift. b. once a month. c. at regular intervals. d. once a week.

at the beginning of every shift.

You should leave the hazard zone: (438) [4.2.4, 4.3.5] once all victims have been rescued. if a PASS alarm is activated. when you reach 50% air consumption. at the same time as your team.

at the same time as your team.

The minimum temperature at which a fuel in the air must be heated in order to start self-sustained combustion is known as the: (122) [4.3.11] autoignition temperature (AIT). piloted ignition temperature (PIT). lower explosive (flammable) limit (LEL). upper explosive (flammable) limit (UEL).

autoignition temperature (AIT).

When applying a dry powder agent, it is important to: (266) [4.3.16] avoid breaking the crust that forms over the burning material. only use a wheeled unit to apply the agent. apply the agent as quickly and forcefully as possible. avoid the ice crystals that form around the discharge nozzle.

avoid breaking the crust that forms over the burning material.

In order to prevent damage to a portable generator, always: Select one: a. run the generator for at least ten minutes before plugging equipment into it. b. start the generator under a load. c. change the fuel before starting it. d. avoid starting it with equipment plugged into it and turned on.

avoid starting it with equipment plugged into it and turned on.

A Fire Fighter I should be able to perform general ladder maintenance, including: Select one: a.tightening the hooks of a roof ladder if they have come loose. b.storing ladders so that they are free from moisture and vehicle exhaust. c.repairing a fly section that will not properly extend or retract. d.replacing any rungs or components that have begun to show signs of wear.

b

According to NFPA 1983, what must be used to make life safety rope? Select one: a.Sisal fibers b.Block creel construction c.Braided rope construction d.Cotton fibers

b

Annual SCBA inspections and maintenance should be performed by: Select one: a.all available firefighters. b.specially trained, factory-qualified technicians. c.a company officer. d.the highest-ranking fire department personnel.

b

Firefighters should wear SCBA in hazardous atmospheres, because exposure to particulate contaminants such as _____ can cause lung cancer or cardiovascular disease. Select one: a.carbon dioxide b.vehicle exhaust emissions c.oil or fuel residue d.ammonium chloride

b

For which of the following would a roof ladder be a better choice to use than a single or extension ladder? Select one: a.Climbing over security gates or fences b.Providing a stable surface on which a firefighter can stand when ventilating a roof c.Providing access to a second or third story window d.Reaching the roof of a commercial building

b

Ground ladders should be service tested at least once a year and: Select one: a.when they are subjected to extremely cold temperatures. b.after being subjected to high heat or rough treatment. c.a minor service test should be done on them each day. d.a minor service test should be done on them each week.

b

Hazardous materials incidents can involve potentially dangerous nonfire gases and vapors, so firefighters must: Select one: a.spend at least 80 percent of their time at the incident outside of the hot zone. b.wear SCBA until air monitoring demonstrates that the atmosphere is safe. c.take more frequent rehabilitation breaks if not wearing SCBA. d.leave the scene until air monitoring demonstrates that the atmosphere is safe.

b

How do firefighter breathing air replenishment systems make fire fighting operations in high-rise buildings more efficient? Select one: a.Require less time to refill air cylinders than other systems b.Provide an endless supply of breathing air to any floor within the structure c.Eliminate the need to use SCBA within the building d.Enable firefighters to work for a longer duration while on SCBA

b

If enough personnel are available to have four firefighters raise a ladder,: Select one: a.the ladder should be raised at the corner of the building. b.a flat rise is normally used. c.the ladder should be raised at a 60-degree angle. d.a beam raise is normally used.

b

If the pressure reading on the remote pressure gauge does not match the reading on the regulator gauge, which reading should be assumed correct? Select one: a.The highest number reading b.The lowest number reading c.An average of the pressure readings d.Neither of the pressure readings

b

In a situation such as a confined space rescue where a team member must work alone, the second team member should: Select one: a.rotate time spent in the confined space with the other team member. b.remain outside the area and monitor the search line. c.help another team, but remain in radio contact with their own team member. d.wait at the Incident Command Post until they are needed.

b

Open-circuit SCBA models: Select one: a.are most commonly used by industrial fire brigades. b.provide compressed air to the wearer. c.provide pure oxygen to the wearer. d.are most commonly used in shipboard operations.

b

Protective trousers designed for fire fighting are: Select one: a.required to be sent to the manufacturer for specialized cleaning after each use. b.constructed from the same fabric, moisture barrier, and thermal layering used in protective coats. c.designed to protect firefighters from extreme fire behavior such as flashover and rollover. d.identical to those used in wildland fire fighting and roadway operations.

b

Rope logs: Select one: a.must be updated daily with inspection information. b.should include information about incidents that result in impact loading. c.should be completed by the department's training officer. d.are required for both life safety and utility rope.

b

Rope that is used exclusively for utility rope and is susceptible to abrasion and damage because a large portion of the load-bearing strands are exposed is known as: Select one: a.dynamic rope. b.laid rope. c.braid-on-braid rope. d.kernmantle rope.

b

SCBA can help protect from _____, which can be caused by inhaling heated gases. Select one: a.low blood sugar b.asphyxiation c.fatigue d.contact burns

b

Swivel plates attached to the butt of the ladder are called: Select one: a.butt spurs. b.footpads. c.protection plates. d.guides.

b

Synthetic fiber rope: Select one: a.is made from materials such as sisal or hemp. b.has a longer life span than natural fiber rope. c.should not be used for life safety applications. d.is difficult to clean, inspect, and maintain.

b

The lowest, widest section of an extension ladder that always maintains contact with the ground while the ladder is being raised is the: Select one: a.stationary section. b.bed section. c.guide section. d.truss section.

b

What are mobile fill stations designed to do? Select one: a.Remove the need for SCBA by filtering ambient air b.Refill air cylinders during emergency incidents c.Pre-fill a large number of SCBA at once in preparation for an incident d.Fill air cylinders during incidents at high-rise buildings

b

What are the pawls (dogs) of a ladder designed to do? Select one: a.Hold the halyard in place after it has been extended b.Hold the fly section in place after it has been extended c.Secure the ladder over the ridge of the building's roof d.Secure the ladder to the surface beneath it and prevent slippage

b

What feature does a roof ladder have that a single ladder does not have? Select one: a.The ability to be raised to multiple heights b.Hooks used to secure it over the top of the roof's ridge line c.A halyard that is used to secure the ladder in place d.Butt spurs that prevent it from slipping when deployed

b

What is a function of station and work uniforms? Select one: a.Provide protection against advanced fire behavior b.Identify wearer as a member of the fire department c.Provide respiratory protection d.Protect wearer from hazardous materials

b

What is a guideline for hoisting a hoseline? Select one: a.Remove the nozzle and hoist it separately. b.Avoid causing damage to the nozzle or couplings. c.Never hoist an uncharged hoseline. d.Never hoist a charged hoseline.

b

What should be used in a confined space in order to help firefighters remain in contact with one another and find their way to the exit? Select one: a.Tag line b.Search line c.Life safety rope d.Wire rope or cable

b

When cleaning a ladder, firefighters should: Select one: a.use strong chemical solvents to clean dirt and debris. b.look for damage or wear and report any defects. c.use a stiff bristled brush and hot water. d.work in teams of two or more.

b

When determining the correct ladder to use, the height of a residential story can be estimated as: Select one: a.15 feet (4.5 m). b.10 feet (3 m). c.20 feet (6 m). d.25 feet (7.5 m).

b

When planning to transition directly from a carry to a raise, a ladder should be carried: Select one: a.tip first. b.butt first. c.by at least three firefighters. d.upright and parallel to the building.

b

When removing a ladder that is mounted on the side of an apparatus,: Select one: a.use a tool to loosen the mounting bracket and lift the ladder away from the apparatus. b.unlatch the securing devices and lift the ladder off the bracket. c.pull the ladder down to release it from the bracket. d.open the access panel, release the mounting bracket, and slide the ladder out.

b

When using the cross-body method of assisting an unconscious victim down a ladder, the: Select one: a.victim faces the ladder rather than facing the firefighter. b.firefighter's hands maintain contact with the ladder rails to keep the victim in place. c.victim must be carried down by two firefighters at the same time. d.firefighter grasps the rungs and the victim rests across the top of the firefighter's arms.

b

When using wire rope or cable from a winch, rescuers must: Select one: a.use a redundant utility rope system in case of failure. b.ensure that personnel are clear from the operating area. c.avoid tying the rope or winch cable to a stationary object. d.use a tag line to help stabilize the rope or cable.

b

Which feature does an extension ladder have that a single or roof ladder does not have? Select one: a.Hooks at the tip of the ladder to help secure it in place b.A fly section that can be raised to various working heights c.Truss blocks that support the rails or rungs d.Tie rods that support the rungs

b

Which guidelines should be followed when using SCBA? Select one: a.Turn your SCBA off just before exiting the hazardous area. b.Only enter an IDLH atmosphere if you have been certified to wear SCBA and properly fit tested. c.Only enter an IDLH atmosphere in teams of three or more firefighters. d.Thermal imagers (TI) should not be used while wearing SCBA.

b

Which is a safety consideration related to PPE? Select one: a.Never share PPE with another firefighter. b.Always wear protective clothing that fits properly. c.Always wear the protective gloves beneath the coat wristlets. d.Make sure there is no overlap between the coat and trousers.

b

Which knot is a good choice to use when a closed loop is needed? Select one: a.Water knot b.Figure-eight on a bight c.Overhand safety knot d.Clove hitch

b

Which piece of information must be included on the permanent compliance label inside each piece of PPE? Select one: a.Firefighter's name b.Cleaning precautions c.Department name d.Wearing instructions

b

Which piece of wildland fire fighting PPE is a piece of flame-resistant fabric that attaches to the helmet? Select one: a.Chain saw protection b.Face/neck shroud c.Fire shelter d.Fusee

b

Which situation would require firefighters to wear hearing protection? Select one: a.Attacking an interior structure fire b.Operating power tools c.Inspecting ladders d.Using a fire department radio

b

Which statement about replacing SCBA cylinders is MOST accurate? Select one: a.After replacement, empty SCBA cylinders should be thrown away or recycled. b.Changing out SCBA cylinders can be accomplished by either one or two people. c.SCBA cylinders may only be replaced if two firefighters are available for the task. d.After replacement, empty SCBA cylinders should be stored with the full cylinders.

b

Which type of rope is traditionally used to establish the perimeter of scene control zones? Select one: a.Branch lines b.Utility rope c.Life safety rope d.Search lines

b

Which type of rope is used as a belay line when there is a possibility that a victim or firefighter may fall a long distance while supported by the rope? Select one: a.Twisted rope b.Dynamic kernmantle rope c.Static kernmantle rope d.Braided rope

b

Why is it important to ensure that PPE is dry before wearing it into a fire? Select one: a.Moisture will fuse Velcro® fasteners to one another. b.Moisture can transfer heat rapidly and result in steam burns. c.Wet clothing is more likely to snag or tear. d.Wet clothing can create a tripping hazard.

b

Which hazard is associated with fire fighting foam concentrate? Select one: a.Widespread negative environmental effects b.Degradation of PPE if left on the garments for a long period of time c.Nausea and fever if foam contacts the skin d.Frostbite if foam contacts unprotected skin

b. Degradation of PPE if left on the garments for a long period of time

Which type of substances have a flash point less than 100°F (38°C)? Select one: a.Surfactants b.Flammable liquids c.Combustible liquids d.Combustible gases

b. Flammable liquids

What is likely to cause poor quality fire fighting foam to be produced? Select one: a.Nozzle is too far below the eductor b.Mixing different types of foam concentrates in the same tank c.Hose lay on the eductor side is not long enough d.Nozzle is fully opened

b. Mixing different types of foam concentrates in the same tank

Which is a characteristic of foam nozzles? Select one: a.Longer stream reach than fog nozzles b.Shorter stream reach than fog nozzles c.More versatile overall than fog nozzles d.Lower quality foam than fog nozzles

b. Shorter stream reach than fog nozzles

Which statement accurately describes pressurized vessels? Select one: a.They are color-coded so responders can easily identify the contents. b.They should be marked with placards or stickers identifying the contents. c.They must have relief hatches or manholes for easy access to the contents. d.They will look the same as vessels used to transport or contain flammable solids.

b. They should be marked with placards or stickers identifying the contents.

What happens when a BLEVE occurs? Select one: a.Failure of a post indicator valve b.Violent rupture of a pressurized container c.Fire involving combustible gases d.Contaminated water supply

b. Violent rupture of a pressurized container

Any valve operation must be performed in coordination with: Select one: a.salvage and overhaul. b.facility personnel supervision. c.a hazardous materials team leader. d.ventilation efforts.

b. facility personnel supervision.

Class A foam acts as a surfactant, which means that it: Select one: a.requires a special type of nozzle for application. b.lowers the surface tension of water, allowing better penetration into the fuel. c.requires a special type of aeriation tool to be formed. d.raises the surface tension of water, creating a more effective extinguishing agent.

b. lowers the surface tension of water, allowing better penetration into the fuel.

Mixing water with foam concentrate to form a foam solution is referred to as: Select one: a.saponifying. b.proportioning. c.aerating. d.surfacting.

b. proportioning.

At an incident involving a gas distribution system, if the gas is burning: Select one: a.firefighters should approach from downwind. b.the flame should not be extinguished. c.foam should be applied in copious amounts in order to reach extinguishment as quickly as possible. d.water should be applied to the leak until a hazmat response team arrives.

b. the flame should not be extinguished.

What action should be taken if a pressurized vessel containing flammable gas is exposed to flames? Select one: a.Apply a fog stream of water b.Apply a solid stream of water c.Apply foam using the roll-on method d.Apply foam using the bank-down method

b.Apply a solid stream of water

Which is an appropriate safe action to take at an incident involving a BLEVE? Select one: a.Approach the vessel at the ends of the tank b.Fight fire from the maximum distance possible c.Attempt to open the vessel's pressure relief valve d.Apply fire fighting foam at a close range

b.Fight fire from the maximum distance possible

At a bulk transport incident, firefighters must: Select one: a.continually apply water to the vessel to keep it cool. b.identify the material involved. c.retreat until a hazmat team arrives. d.shut down all lanes of traffic around the incident.

b.identify the material involved.

In a ventilation-limited compartment fire that has a large volume of flammable gases, opening a door or window could result in: (156) [4.3.11] backdraft. flashover. piloted ignition. spontaneous ignition.

backdraft.

Limited means of egress and limited ventilation are two reasons that fires are more dangerous in _____ than in other compartments.

basements

Negative-pressure ventilation requires that the opening around the fan: (509) [4.3.11] allow hose streams to fit through the opening. be sealed to prevent outside air from being drawn in around the fan. allow the fan to be easily moved if needed. be at least six inches to allow outside air to be drawn in around the fan.

be sealed to prevent outside air from being drawn in around the fan.

If you handle, move, or gather evidence, you: (763) [4.3.8, 4.3.14] become part of the chain of custody. will be responsible for filling out evidence reports about it. may be found guilty of a crime. must immediately take it to the fire investigator.

become part of the chain of custody.

Firefighters should ensure that PASS devices are on and operating properly: (673) [4.3.10] before entering the structure. once they reach the seat of the fire. before applying water to the fire. once they reach their "point of no return."

before entering the structure.

What is the term for the burned area of a wildland fire

black

What must the acting Incident Commander know in order to forecast fire growth and development?

building construction type

All PPE designed for structural fire fighting must meet the requirements of: Select one: a.NFPA 1981. b.NFPA 1002. c.NFPA 1971. d.NFPA 1006.

c

At an emergency incident, utility rope can be used for: Select one: a.a rescue or hoisting operation. b.rescuing a victim from swift water. c.creating a control zone perimeter. d.supporting a firefighter who is rappelling.

c

Avoid placing ladders: Select one: a.on the upwind side of a door or window opening. b.at an angle of greater than 60 degrees. c.over openings where they may be exposed to heat or flame. d.at multiple locations on different sides of the building.

c

During structural fire fighting operations, primary eye protection is provided by: Select one: a.the protective hood. b.helmet-mounted faceshield. c.the SCBA facepiece. d.safety glasses.

c

For which of the ladder mounting locations would firefighters access the ladder from the rear of the apparatus? Select one: a.In a mechanically operated rack that lowers from the top of the hose bed to the right side of the apparatus b.Mounted vertically on the left or right side of the apparatus c.Laying flat in a compartment under the right side of the hose bed d.Hanging on a beam in racks on the right side of the apparatus

c

For which task would a single ladder be used? Select one: a.To gain access to the third story of a residential home b.To gain access to the roof of a commercial building c.To reach someone trapped in a 6-foot (2 m) trench d.To provide stability while working on a pitched roof

c

How can a firefighter overcome psychological limitations such as fear and claustrophobia while wearing SCBA? Select one: a.Regular medical evaluations b.Exercise and a proper diet c.Repeated training with the SCBA d.Proper fit testing

c

In order to stay as safe as possible while wearing SCBA, it is important to: Select one: a.refill the SCBA cylinder once it is below 30% capacity. b.refill the SCBA cylinder once it is below 50% capacity. c.keep SCBA on and activated until you leave the IDLH area. d.leave a space between the SCBA facepiece and your skin.

c

Lumps in the sheath of braid-on-braid rope indicate: Select one: a.mildew damage. b.rope rot. c.core damage. d.impact loading. Feedback

c

Personal alert safety system (PASS) alarms are designed to activate when: Select one: a.the amount of air in the SCBA air cylinder drops below 50 percent of capacity. b.toxic gases have been detected in the surrounding atmosphere. c.a firefighter is motionless for more than 30 seconds. d.firefighters encounter hazardous materials at an incident scene.

c

Personnel should inspect all ropes after each use and inspect unused rope: Select one: a.after exposure to open flame. b.at least once a month. c.at least once a year. d.at least once every six weeks.

c

Shifting a ladder that is already in a vertical position: Select one: a.should only be done in emergency situations. b.must never be attempted. c.should be limited to short distances. d.always requires two firefighters.

c

The designated length of a ladder is: Select one: a.the height a ladder will reach after being set to the appropriate climbing angle. b.always less than a ladder's working length. c.the total length of a single section ladder and the maximum extended length of an extension ladder. d.the same as the ladder's working length.

c

The moveable upper part of an extension ladder that is raised to various heights is called the: Select one: a.halyard. b.truss block. c.fly section. d.bed section.

c

To safely climb an extension ladder, it is recommended to place your feet: Select one: a.in the center of the rungs with the halyard tied in the center of the rungs. b.near the beams with the halyard tied on the outside of the rungs near the beams. c.near the beams with the halyard tied in the center of the rungs. d.in the center of the rungs with the halyard tied on the outside of the rungs near the beams.

c

What can be used to create a mechanical advantage for rope rescue or when hoisting heavy objects? Select one: a.Lever b.Pike pole c.Pulley d.Figure-eight

c

What is a general safety guideline for ladder use? Select one: a.No more than two firefighters should work on each 10-foot (3 m) section of ladder. b.Never leave any type of ladder unattended. c.Ladders should be raised at least 10 feet (3 m) away from electrical wires. d.Use back and arm muscles instead of leg muscles to lift ladders.

c

What is structural PPE designed to do? Select one: a.Protect from temperatures of up to 1,000°F (540°C) b.Prevent burns from extreme fire behaviors such as flashover c.Cover all portions of skin while reaching, bending, or moving d.Eliminate exposure to hazardous materials

c

What piece of information should firefighters know in order to help ladder operations be as quick and efficient as possible? Select one: a.Previous calls on which each ladder was used b.Manufacturer and manufacture date of each ladder carried on the apparatus c.Types and locations of ladders carried on the apparatus d.Types of ladders that are marked out of service

c

What safety precaution must be taken when raising a ladder near overhead electrical wires? Select one: a.Wait for a representative from the electric company to arrive before raising the ladder. b.Extend the fly section before raising. c.Look up multiple times to check for the location of the wires. d.Raise the ladder perpendicular to the building.

c

What should be done after doffing SCBA? Select one: a.Turn on the PASS device. b.Tighten all the facepiece straps. c.Close the cylinder valve. d.Connect the regulator to the facepiece.

c

What should be done during routine inspections of PPE, such as after use at an incident? Select one: a.Complete a fabric strength test b.Perform a hydrostatic test c.Look for damage like rips or tears d.Perform specialized cleaning Feedback

c

When assisting an unconscious victim down a ladder, special consideration should be taken to: Select one: a.maintain the victim in a vertical position resting against the ladder. b.try to help the victim regain consciousness before descending the ladder. c.place the victim's feet outside the rails in order to prevent entanglement. d.ensure that the ladder is heeled by at least four firefighters on the ground.

c

When donning an unmounted SCBA, the SCBA unit should be: Select one: a.stored in an outside compartment of the apparatus. b.stored in a specialized compartment inside the apparatus. c.placed on the ground with all of the straps extended. d.placed behind the firefighter with all of the straps tightened.

c

When inspecting a roof ladder, it is important to check that the: Select one: a.halyard does not show signs of dry rot. b.pulleys turn freely and do not stick in place. c.hook assemblies are not loose, deformed, or rusted. d.fly sections glide easily up and down.

c

When inspecting kernmantle rope, look at the sheath: Select one: a.for signs of powdering between the strands. b.to determine whether it has been impact loaded. c.for irregularities in shape or weave. d.to determine the age of the rope.

c

When one firefighter raises an extension ladder from a low-shoulder carry: Select one: a.another firefighter must stand by and act as a safety spotter in case the ladder starts to fall. b.the ladder must be raised parallel to the building instead of perpendicular to it. c.the building is used to heel the ladder and prevent it from slipping while being raised. d.the ladder must be raised with the fly in, then pivoted so that the fly is facing out.

c

Which SCBA component includes a control valve and a high-pressure hose attached to one end? Select one: a.Harness b.Regulator c.Air cylinder d.Facepiece

c

Which component of the protective coat is designed to make firefighters more visible at night or in low light conditions? Select one: a.Collar b.Drag Rescue Device c.Retroreflective trim d.Wristlets

c

Which method is acceptable to use when drying synthetic rope? Select one: a.Place it in a clothes dryer on a high heat setting b.Use a hairdryer to dry small sections of the rope at a time c.Hang it on a hose tower d.Lay it flat to dry outside in the sun

c

Which part of a ladder is placed on the ground when the ladder is positioned? Select one: a.Fly b.Beam c.Butt d.Rung

c

Which piece of PPE is donned under the helmet and is designed to protect the neck, ears, and face from exposure to heat, embers, and debris? Select one: a.SCBA facepiece b.Thermal barrier c.Protective hood d.Moisture barrier

c

Which type of knot is used primarily on life safety ropes to tie ropes of equal diameters together? Select one: a.Overhand safety b.Clove hitch c.Figure-eight bend d.Figure-eight on a bight

c

Which type of ladder is likely to be affected by water damage? Select one: a.Aluminum ladder b.Steel ladder c.Wooden ladder d.Fiberglass ladder

c

Which type of rope is commonly used as utility rope and is constructed by uniformly intertwining strands of rope together in a diagonally overlapping pattern? Select one: a.Kernmantle rope b.Twisted rope c.Braided rope d.Laid rope

c

Which type of webbing is primarily used for straps and harnesses at rescue incidents? Select one: a.Shuttle-loom webbing b.Tubular webbing c.Flat webbing d.Spiral weave webbing

c

f storing SCBA in seat mounts, be sure to: Select one: a.bring a backup SCBA in case the first does not function properly. b.open the cylinder and bypass valves before placing the SCBA in the mount. c.arrange the SCBA so it can be donned without removing your seat belt. d.tighten the SCBA harness straps so that they are ready for donning.

c

Which type of foam proportioner can compromise firefighter safety by slowing firefighters down since it requires the concentrate to be available where the nozzle is being operated? Select one: a.In-line eductor b.Apparatus-mounted proportioner c.Foam nozzle eductor d.Compressed air foam system (CAFS)

c. Foam nozzle eductor

Which is a responsibility of the fire department at a response involving a suspected propane leak? Select one: a.Test the stability of the leaking vessel b.Repair the propane leak c.Notify the propane company d.Isolate the pressure vessel systems

c. Notify the propane company

Which is true of polar solvent fuels? Select one: a.Gasoline is the most common example of a polar solvent. b.Fires involving polar solvents can be extinguished using Class B foams designed for hydrocarbon fires. c.They are flammable liquids that mix readily with water. d.Fires involving polar solvents can be extinguished using Class A foams designed for ordinary combustible fires.

c. They are flammable liquids that mix readily with water.

The amount that fire fighting foam expands depends on the type of foam concentrate used and: Select one: a.whether the water is from a static or pressurized source. b.the number of personnel working with the proportioner. c.accurate proportioning of the foam concentrate in the solution. d.whether potable or nonpotable water is used in the solution.

c. accurate proportioning of the foam concentrate in the solution.

If the foam being produced is poor quality, the firefighter should: Select one: a.use a longer hose lay to provide less friction loss. b.close the nozzle slightly to reduce the amount of water flow. c.check to make sure there are no air leaks in the proportioning device. d.move the nozzle farther above the eductor to reduce elevation pressure.

c. check to make sure there are no air leaks in the proportioning device.

Because of environmental concerns about fire fighting foam, firefighters should: Select one: a.use foam only as the last option for extinguishment. b.not use foam near bodies of water or public water sources. c.try to prevent the foam from entering bodies of water. d.have a hazardous materials team on standby when using the foam.

c. try to prevent the foam from entering bodies of water.

In order to create high-quality foam: Select one: a.a fog nozzle must be used. b.foam solution and water must be premixed and allowed to rest before application. c.foam concentrate, water, and air must be mixed in the correct ratio. d.a foam nozzle must be used.

c.foam concentrate, water, and air must be mixed in the correct ratio.

An advantage of _____ is that they are widely available on most fire apparatus. Select one: a.compressed air foam systems (CAFS) b.apparatus-mounted proportioners c.fog nozzles d.foam nozzles

c.fog nozzles

Class B foams are especially effective on: Select one: a.ordinary combustibles. b.energized electrical equipment. c.hydrocarbon fuels. d.surfactants.

c.hydrocarbon fuels.

The premixing method of foam proportioning is typically used with: Select one: a.in-line eductors. b.fog nozzles attached to a large hoseline. c.vehicle-mounted tank systems. d.a fixed fire protection system in a structure.

c.vehicle-mounted tank systems.

Heat that is radiated to the insulating air layer between PPE and your body: (135) [4.3.11, 4.3.12] can cause heat stress and failure of the PPE. may cause spontaneous ignition of the PPE materials. dissipates at a much quicker rate than convected heat. is less dangerous than heat conducted to the outside of the PPE.

can cause heat stress and failure of the PPE.

Rolled salvage covers: (750) [4.3.14] are much more difficult to spread than folded covers. can easily be spread by one person. can become damaged more easily than folded covers. require more than one person to spread.

can easily be spread by one person

The use of engineered or lightweight construction and trussed support systems pose a danger to firefighters because engineered trusses: (174) [4.3.10] can fail after 5 to 10 minutes of exposure to fire. are not required to meet any special building code requirements. add more to the fuel load of a fire than natural building materials do. obstruct the ability to identify dangerous building conditions from the exterior.

can fail after 5 to 10 minutes of exposure to fire.

Removing the doors and roof from a unibody construction vehicle:

can seriously compromise its structural integrity.

Horizontal sliding fire doors:

cannot be used to protect openings in walls in the required path of egress.

The act of physically forcing blood through a patient's body and providing artificial respiration is known as: (1033) [6.2.1] rigor mortis. automatic external defibrillation (AED). cardiopulmonary resuscitation (CPR). cardiac arrest.

cardiopulmonary resuscitation (CPR).

If a patient is unresponsive, the first thing a responder should do is: (1030) [6.2.1] check to find the patient's identification. check the patient's circulation. begin administering rescue breaths. begin chest compressions.

check the patient's circulation.

Using extinguishing agents other than water and foam to interrupt the combustion reaction is referred to as: (165) [4.3.11] chemical flame inhibition. temperature reduction. oxygen exclusion. fuel removal.

chemical flame inhibition.

When a substance changes from one type of matter into another, such as two or more substances combining to form compounds, the substance undergoes a: (118) [4.3.11] chemical reaction dissolution metamorphosis physiological change

chemical reaction

If a fire is encountered in a room during search and rescue operations, rescuers should: (454) [4.3.9] close the door and report the conditions. abandon the search and immediately leave the building. leave the door open to provide ventilation to the compartment. mark the door with USAR-approved symbols.

close the door and report the conditions.

When turning off the natural gas supply to a structure,: (691) [4.3.18] call the gas company and wait for them to arrive before attempting to close the valve. close the valve by turning the tang until it is 90 degrees to the pipe. close the valve by turning the tang until it is directly in line with the pipe. a second firefighter must be standing by in case a hazardous situation arises.

close the valve by turning the tang until it is 90 degrees to the pipe.

When testing fire hose, it is important to: Select one: a. close valves slowly to prevent water hammer. b. make sure that hose lengths are at least 300 feet (100 m) long. c. wear full structural PPE and SCBA. d. charge large diameter hose before laying it out on the ground.

close valves slowly to prevent water hammer.

If a firefighter uses a Z pattern to apply water to the hot gas layer and then the burning fuels at the floor level, he or she is using a(an) ______ fire attack. (679) [4.3.10] transitional direct indirect combination

combination

The Fire Fighter I has the responsibility to: (502) [4.3.11, 4.3.12] determine vertical ventilation locations. communicate observations about performing ventilation. determine horizontal ventilation locations. assign ventilation tasks.

communicate observations about performing ventilation.

What action should you take if you are leading the attack line crew and you discover a person in need of rescue

communicate this to the IC and/or rescue crew

If you think your life is in immediate danger, transmit the MAYDAY signal and then: (468) [4.2.4, 4.3.5] activate your PASS device before communicating your situation to the IC. communicate your situation to the IC before activating your PASS device. call the rapid intervention crew. provide personnel accountability report.

communicate your situation to the IC before activating your PASS device.

In a building that is protected by control mode sprinklers, firefighters need to: (685) [4.3.14] complete suppression before turning off the system. perform fire attack from outside the fire compartment. stay back and allow the sprinklers to put out the fire. turn the system off before entering the building

complete suppression before turning off the system.

The transfer of heat through and between solids is known as: (131) [4.3.10, 4.3.11, 4.3.12] conduction self-heating radiation convection

conduction

A Fire Fighter II may be assigned the task of setting up and monitoring the supplied air respirator system for rescue personnel at a:

confined-space rescue.

When maintaining portable lighting equipment, it is safest to: Select one: a. replace bulbs immediately after shutting off the power. b. connect each light to the generator one at a time. c. replace the bulbs while the power is still turned on. d. connect all lights to the generator at the same time before starting the generator.

connect each light to the generator one at a time.

Fuels that are in contact with each other are described as

continuous

Nearby structures and vegetation can be ignited if ______ carries hot fire brands or embers aloft. (502) [4.3.11, 4.3.12] conduction radiation diffusion convection

convection

The primary mode of heat transfer from one compartment to another in a structure fire is: (497) [4.3.11, 4.3.12] radiation. direct burning. convection. conduction.

convection

To ensure that the decay stage of a ventilation-limited fire is the fire's final stage, firefighters must provide a controlled transition of a fire in the decay stage from ventilation-limited to fuel-limited, by: (160) [4.3.11] cooling the hot fire gases before further ventilation occurs. carrying unburned fuel away from the compartment. protecting exposures until the fire consumes all available fuel. restricting ventilation until the heat transfers out of the compartment.

cooling the hot fire gases before further ventilation occurs.

Which duty would a firefighter perform if he or she were acting as crew leader?

coordinating resources with other resources at the scene

In order to protect the structure from damage due to weather and trespassers, firefighters should: (755) [4.3.14] advise the owner that it is his or her responsibility to secure the premises. contract with a third-party company to protect the structure. replace all doors and windows after overhaul is complete. cover door and window openings with plywood or plastic sheeting.

cover door and window openings with plywood or plastic sheeting.

A daily/weekly inspection of SCBA should include: Select one: a.specialized cleaning by the manufacturer. b.a hydrostatic test. c.fit testing. d.a check of the regulator and facepiece.

d

After each use, the SCBA facepiece should be: Select one: a.sanitized using a machine built specifically for facepieces. b.cleaned, dried, and placed out of service. c.sent to the manufacturer for a commercial-grade cleaning. d.washed with warm water and a mild disinfectant.

d

Before deploying a roof ladder, the: Select one: a.fly must be extended. b.roof ladder must be hoisted to the roof. c.roof ladder's halyard must be properly tied. d.hooks should be opened.

d

Factors that firefighters have the most control over that affect the success of SCBA use include physical condition, agility, and: Select one: a.tasks assigned. b.cylinder size. c.experience in similar situations. d.lung capacity.

d

How should long lengths of webbing be stored? Select one: a.Placed in a mesh bag b.Folded in an apparatus compartment c.Placed in air-tight and water-tight bins d.Rolled or daisy-chained

d

If foreign objects that can damage fibers are found in a rope during inspection, the rope: Select one: a.must be thoroughly cleaned and reinspected before reuse. b.must be sent to the manufacturer for further inspection. c.should be downgraded to utility rope. d.should be removed from service and destroyed.

d

Modern metal and fiberglass ladders are designed to be used with the: Select one: a.halyard tied to the top rung. b.fly facing in. c.halyard left untied. d.fly facing out.

d

Natural fiber ropes: Select one: a.melt when exposed to heat or flame. b.are resistant to mold, mildew, and chemical damage. c.should not be used as utility rope. d.should not be used for life safety applications.

d

Once an extension ladder is raised and in place, the halyard should be: Select one: a.wrapped around a rung and then tied around the ladder's beam. b.left untied so that the extension height can easily be changed. c.tied to the lowest rung of the extension ladder. d.secured to prevent someone from becoming tangled in it.

d

PPE must be properly cleaned because chemicals, oils, and petroleum products on the outer shell: Select one: a.will instantly soak through to the inner layers. b.may stain the protective outer layer. c.will void the manufacturer's warranty. d.can ignite when exposed to fire.

d

Side- or rear-mounted SCBA: Select one: a.must be stored inside of a sealed storage box. b.are more dangerous to don than seat-mounted SCBA. c.can be mounted on the inside of the apparatus cab. d.are mounted on the exterior of the apparatus.

d

Situations or events that signal the need for exit are called: Select one: a.ingress/egress procedures. b.situational exit guidelines. c.withdrawal guidelines. d.exit indicators.

d

To prevent injury when raising or lowering an extension ladder: Select one: a.keep the halyard tied throughout the operation. b.do not shift the ladder once it is in place. c.ensure that the pawls are seated just below the rungs. d.grasp the beams, rather than the rungs.

d

What does an extension ladder's size classification indicate? Select one: a.The minimum reach when placed at the appropriate climbing angle b.The ladder's length when the fly section is not extended c.The maximum building height against which the ladder can be raised d.The full length to which it can be extended

d

What is a general safety precaution to take when refilling an SCBA cylinder? Select one: a.Fill the cylinder as quickly as possible. b.Wear full structural fire fighting PPE. c.Perform a hydrostatic test on the cylinder. d.Check the hydrostatic test date of the cylinder.

d

What is a safety precaution that should be taken when heeling a ladder? Select one: a.Grasp the ladder rungs rather than the beams. b.Wear full PPE, including SCBA, when heeling from behind the ladder. c.Use a ladder belt to secure the ladder to a fixed object. d.Look forward, not up, when someone is climbing the ladder.

d

What is a sign of heat exposure on a ladder? Select one: a.Loose bolts or rivets b.Rust c.Expired heat sensor label d.Blistered paint

d

What is involved in dressing a knot? Select one: a.Beginning with a temporary hitch b.Creating the bight to start the knot c.Untying the knot and straightening the rope d.Tightening the knot and removing slack

d

What is the function of the heads-up display (HUD) on the SCBA facepiece assembly? Select one: a.Shows the location of other team members nearby b.Helps create an airtight seal between the wearer's face and the SCBA facepiece c.Allows the wearer to communicate with team members d.Displays lights that indicate the amount of air left in the SCBA cylinder

d

What should be done when assisting a conscious victim down a ladder? Select one: a.Face the victim toward the rescuer and supported on the rescuer's knee b.Rely on arm strength to keep the victim in place c.Use the cross-body or modified cross-body method to support the victim's head and legs d.Remove all other loads or activity on the ladder during the rescue

d

What should be used to clean synthetic fiber ropes? Select one: a.Specially formulated industrial cleansers b.Bleach and hot water c.Cold water d.Lukewarm water and mild detergent

d

What should you do if you determine that your PPE requires advanced repairs? Select one: a.Repair the PPE yourself and report it to the supervisor b.Continue using the PPE until more can be purchased c.Throw the PPE away and order a new set d.Report the needed repairs to your supervisor

d

What would be the proper placement for a ground ladder that will be used to perform ventilation on a second story window? Select one: a.The tip of the ladder is raised to the mid-point of the window on the downwind side. b.The ladder is raised a minimum of three rungs above the roof's edge. c.The tip of the ladder is raised to just below the window sill. d.The tip of the ladder is raised to the mid-point of the window on the upwind side of the window.

d

When hoisting tools and equipment, always remember to: Select one: a.charge a hoseline before hoisting it. b.use a team of three people for every hoisting operation. c.use a carabiner to create a mechanical advantage. d.make sure that all personnel are clear of the hoisting area.

d

When personnel are working on the roof or upper stories,: Select one: a.aerial devices should be chosen for escape instead of ground ladders, if possible. b.ladders should be positioned on the north and south sides of the building, if possible. c.two ladders should be placed directly next to one another as a means of escape. d.there must be at least two means of escape in different locations.

d

When placing ground ladders, what conditions must be communicated to crew members and/or supervisors? Select one: a.Temperature and humidity levels b.Time of day c.Age of the structure d.Icy ground or uneven terrain

d

When properly climbing a ladder, the firefighter should look: Select one: a.forward and place his or her feet toward the center of the rungs. b.toward the ladder tip and the beams. c.toward the ladder tip with feet placed toward the center of the rungs. d.forward with his or her arms straight, grasping alternate rungs.

d

When properly worn, fire fighting gloves: Select one: a.will protect the firefighter from exposure to hazardous materials. b.offer minimal protection against heat and embers. c.lay flat beneath the wristlets of the protective coat. d.must completely cover the wristlet of the protective coat.

d

When three firefighters work together to raise a ladder, one is at the tip, one is at the butt, and the third is positioned: Select one: a.to the side to give commands. b.as a heeler at the butt of the ladder. c.at the tip. d.supporting the beam. Feedback

d

Where would generally be the safest placement for a ground ladder that is going to be used for rescue? Select one: a.The tip of the ladder is even with the top of the window on the upwind side of the window. b.The ladder is raised a minimum of three rungs above the roof's edge. c.The tip of the ladder is raised to the mid-point of the window on the downwind side. d.The tip of the ladder is raised to just below the window sill.

d

Which SCBA component allows the air cylinder to be transfilled from another cylinder in the event of an emergency? Select one: a.End-of-service-time indicator (EOSTI) b.Emergency Escape Breathing Support System (EEBSS) c.Heads-up display (HUD) d.Rapid intervention crew universal air coupling (RIC UAC)

d

Which SCBA component controls air flow from the cylinder when the regulator fails? Select one: a.Mainline valve b.Diaphragm c.Pressure gauge d.Bypass valve

d

Which SCBA equipment limitation would MOST directly impact a firefighter's ability to navigate on scene? Select one: a.Poor equipment condition b.Low air cylinder pressure c.Decreased mobility d.Limited visibility

d

Which part of a rope hangs free and is used for pulling or hoisting? Select one: a.Hitch end b.Working end c.Standing part d.Running part

d

Which piece of PPE can provide a secondary layer of eye protection in addition to an SCBA facepiece? Select one: a.Fusee b.Protective hood c.Neck shroud d.Helmet faceshield

d

Which situation would be classified as an emergency exit indicator that would signal the need to leave the hazardous or contaminated area immediately? Select one: a.Need to replace an air cylinder b.Completed assignment c.Stabilized situation d.SCBA failure

d

Which situation would likely have an oxygen-deficient atmosphere in which respiratory protection would be necessary? Select one: a.High-angle rope rescue b.Swift water rescue c.Vehicle extrication d.Rescue in a sewer

d

Which statement about structural fire fighting protective coats is accurate? Select one: a.The outer shell must be worn at all times, and the additional layers can be added if the situation requires extra protection. b.At least two of the three coat components must be worn together in order to provide complete protection. c.The thermal barrier is required during structural operations, but should be removed during rescue or extrication operations. d.The outer shell, moisture barrier, and thermal barrier must always be worn together.

d

Which statement regarding the use of fire fighting helmets is accurate? Select one: a.Chin strap color and markings indicate a firefighter's rank and unit. b.Chin straps may be worn open or closed. c.Ear flaps are optional if wearing a protective hood. d.Ear flaps must be folded down, even if wearing a protective hood.

d

Why do some ladders have a white tip or reflective tape attached to the tip? Select one: a.To indicate the balance point of the ladder b.To indicate the maximum reach of the ladder c.To measure the amount of heat the ladder has been exposed to d.To increase visibility in smoky or dark conditions

d

Most fire fighting foams are intended to be mixed with: Select one: a.50 to 75.9 percent water. b.30 to 60 percent water. c.80 to 90 percent water. d.94 to 99.9 percent water.

d. 94 to 99.9 percent water.

What is necessary when applying fire fighting foam? Select one: a.Intermittent application breaks to allow the foam to settle b.A vapor protective suit and SCBA c.A hazardous materials team standing by d.Continued, uninterrupted application until extinguishment

d. Continued, uninterrupted application until extinguishment

Which method of foam proportioning involves using an external pump to force foam concentrate into the fire stream? Select one: a.Eduction b.Batch mixing c.Premixing d.Injection

d. Injection

What should firefighters do if the fire begins to spread uncontrollably when they are applying foam? Select one: a.Move to a different location around the fire while using portable fire extinguisher for protection b.Apply a greater quantity of foam c.Switch to a different extinguishing agent d.Retreat to a safe location while using handlines for protection

d. Retreat to a safe location while using handlines for protection

At an incident involving flammable liquids or gases, firefighters should immediately retreat to a safe location: Select one: a.once the hazmat team arrives. b.if they realize that the leak is coming from the distribution system. c.once a foam blanket completely covers the burning material. d.if the sound of escaping gas starts to get louder.

d. if the sound of escaping gas starts to get louder.

The rate of application for Class B foam depends on: Select one: a.whether or not the fuel is a surfactant. b.the type of water used to proportion the foam. c.the location of the fuel spill. d.whether the fuel is spilled or contained in a tank.

d. whether the fuel is spilled or contained in a tank.

In a compartment fire, smoke flashover indicators include rapidly increasing volume, turbulence, optical density and: (155) [4.3.11] darkening color. thermal properties. fuel load. ventilation.

darkening color.

A fire is said to be in the ______ stage when it runs out of either available fuel or available oxygen. (159) [4.3.11] decay growth incipient fully-developed

decay

Firefighters use air-monitoring devices to: (440) [4.3.21] test the air quality in an SCBA cylinder. measure ambient air temperatures. inspect the air inside apparatus tires. detect oxygen levels and hazardous substances.

detect oxygen levels and hazardous substances.

When determining which type of operational strategy to use at an incident, the Incident Commander conducts a risk/benefit analysis to

determine if lives can be saved without unnecessary risk to firefighters

Once the area of origin of a fire has been determined, the next step in the process is to: (760) [4.3.8, 4.3.13] contact the fire investigator. determine the cause of the fire. establish the evidentiary chain of custody. set up perimeter boundaries.

determine the cause of the fire.

The information contained in postincident reports is used to assess departmental needs and

determine trends in fire cause

The first task during size-up of a water or ice incident is to:

determine whether rescue or recovery is required.

If there is a fire in the undercarriage of a vehicle,: (699) [4.3.7] Class A foam should be used to extinguish the fire. firefighters should retreat and let the fire burn itself out. a hazardous materials team must be called before approaching the vehicle. direct a stream at the ground to deflect water upward toward the underside of the vehicle until the fire is extinguished.

direct a stream at the ground to deflect water upward toward the underside of the vehicle until the fire is extinguished.

If a firefighter aims a solid stream at an item that is on fire and applies water until the item is no longer burning, he or she is using a(an): (677) [4.3.8, 4.3.10] direct attack. indirect attack. combination attack. transitional attack.

direct attack.

A tracking device set to search mode: (474) [4.3.9] makes noise to alert rescuers to the downed firefighter's location. is only activated when a PASS device fails. will not transmit a signal through walls, floors, or other solid objects. displays the distance and direction toward another receiver.

displays the distance and direction toward another receiver.

Stabilizing a rescue incident may involve:

diverting or blocking traffic.

When opening a ceiling to check for fire extension,: (745) [4.3.10, 4.3.13] it will be necessary to use power tools rather than hand tools. at least four firefighters are needed to perform the duty effectively. do not stand directly below the area being opened. work directly below the area being pulled in order to be the most efficient.

do not stand directly below the area being opened.

After completing equipment maintenance, it is important to clean the work area and: Select one: a. contact the manufacturer to verify that maintenance is complete. b. ask another firefighter to complete a secondary inspection. c. document maintenance per local SOPs. d. immediately report completion to the company officer.

document maintenance per local SOPs.

Class A portable fire extinguishers are rated from I-A through 40-A based upon the amount of water and: (255) [4.3.16] duration and range of discharge used in extinguishing test fires. whether the portable extinguisher is certified for novice use. the weight and height of the portable extinguisher. whether the portable extinguisher is intended for indoor or outdoor use.

duration and range of discharge used in extinguishing test fires.

From an extrication standpoint, every vehicle can be considered to have:

eight sides.

When assisting with trench rescue:

eliminate sources of vibration such as apparatus and heavy equipment.

When heated, steel structural members tend to: Select one: a.elongate and push walls outward. b.spall. c.contract and cause walls to fall inward. d.crumble.

elongate and push walls outward.

A recommended procedure regarding decontamination is to: (746) [4.3.13] bag contaminated equipment for travel back to the station. leave contaminated equipment at the scene for disposal. place contaminated equipment in the cab of the apparatus for travel back to the station. ensure all equipment is thoroughly decontaminated before leaving the scene.

ensure all equipment is thoroughly decontaminated before leaving the scene.

Before entering an IDLH environment, you must: (450) [4.3.9] document the exact tools and equipment you are taking into the structure. ensure that your SCBA is turned on, working properly, and contains a full cylinder of air. estimate the total time to be spent in the structure based on your team's average air consumption rate. don the highest level of PPE available to you.

ensure that your SCBA is turned on, working properly, and contains a full cylinder of air.

During search and rescue operations, rescuers should NOT: (453) [4.3.9] exit the building by turning in the opposite direction that was turned to enter. move quickly and stay close to the wall of a hallway or room when it is filled with smoke. close doors during the search. enter a structure where survivors are not likely to be found.

enter a structure where survivors are not likely to be found.

Which is a duty of the initial Incident Commander?

establish communications according to local SOPs

Which statement describes evacuation signals?

evacuation signals are used when the IC determines that interior crew must withdraw due to hazardous conditions

When fighting a vehicle fire, a piercing nozzle can safely be used to: (698) [4.3.7] extinguish fire under the hood. provide protection when advancing toward the vehicle. combat fires in the wheel well of a hybrid vehicle. apply a foam layer over pools of spilled fuel.

extinguish fire under the hood.

When a firefighter acting as the Incident Commander needs to transfer Command to someone

face-to-face transfer of Command is preferred

When gusset plates are exposed to fire, they:

fall out after the wood burns away and no longer provide structural support.

Firefighters working in the exhaust portion of the flow path will: (163) [4.3.11] feel the increase in temperature as the velocity and/or turbulence increases. see visibility improve as turbidity and airflow increases. see waves of radiant heat emitting from the walls and ceiling. feel a decrease in temperature as air is entrained by the fire.

feel the increase in temperature as the velocity and/or turbulence increases.

For which kind of electrical emergency would it be safe and appropriate to use a class C portable fire extinguisher

fire in a desktop computer

Overhaul operations may affect a structure's stability when: Select one: a.ventilation fans are used to clear smoke from the area. b.salvage covers are placed to protect furnishings. c.firefighters accidentally cut through load bearing components. d.furniture and other movable fixtures are removed from the structure.

firefighters accidentally cut through load bearing components.

When performing positive-pressure ventilation,: (512) [4.3.11, 4.3.12] exposures are at a much greater risk of fire spread. firefighters must enter the smoke-filled environment to set up PPV blowers. firefighters must use horizontal ventilation. firefighters can set up PPV blowers without entering the smoke-filled environment.

firefighters can set up PPV blowers without entering the smoke-filled environment.

What information should be included in the arrival report?

first impression of hazardous conditions at the scene

A _____ window consists of only a frame and one glazed stationary sash.

fixed

The size and location of a fire may be indicated by

flames are visible from outside the structure

Combustion can occur within a range of concentration of fuel vapor and air; this range is referred to as the: (143) [4.3.11] flammable (explosive) range. vapor pressure range. oxidation (combustion) range. surface to mass range.

flammable (explosive) range.

The minimum temperature at which a liquid gives off sufficient vapors to ignite, but not sustain combustion is its: (139) [4.3.10, 4.3.11] flash point. vapor pressure. specific gravity. degree of solubility.

flash point.

Which type of nozzle is generally selected for an interior attack?

fog nozzle

Firefighters should never attempt to perform rescue tasks:

for which they are not trained, qualified, and equipped.

Negative pressure ventilation involves artificially lowering pressure inside the structure so that: (507) [4.3.11] smoke and fuel gases move toward lower-pressure openings more quickly. fresh air from outside moves in more quickly. smoke and fuel gases will have limited movement. fresh air from outside will not enter.

fresh air from outside moves in more quickly.

Handline streams have flows that discharge: (620-621) [4.3.10] more than 350 gpm (1 400 L/min). from 40 to 350 gpm (160 to 1 400 L/min). from 25 to 300 gpm (100 to 1 200 L/min). less than 40 gpm (160 L/min).

from 40 to 350 gpm (160 to 1 400 L/min).

In a forward lay, the hose is deployed: (601-603) [4.3.15] from the water source to the incident scene. using a minimum of four firefighters. from the incident scene to the water source. using a minimum of three firefighters.

from the water source to the incident scene.

Closing the valve on a natural gas tank to stop the emission of gaseous fuel would be an example of: (670) [4.310] fuel removal. oxygen exclusion. chemical flame inhibition. temperature reduction.

fuel removal.

Battery packs and pneumatic air cylinders should be kept: Select one: a. at least 75% charged. b. at least 50% charged. c. at any charge level, as long as they are functional. d. fully charged.

fully charged.

Fires develop through four stages: Incipient, growth, ______, and decay. (146) [4.3.11] fully-developed radiant ventilation limited rollover

fully-developed

A collapsed storage shed that is fully involved in flames would be an example of a: (157-158) [4.3.11] fully-developed fuel-limited fire. fully-developed ventilation-limited fire. fire in the growth stage. fire in the decay stage.

fully-developed fuel-limited fire.

Building codes require that:

glass doors are made from tempered glass.

Using direct pressure to stop bleeding requires: (1039) [6.2.1] gloves. an arterial bleed. advanced medical training. a conscious patient.

gloves.

Which of the following is an example of a fine fuel

grass

Reduced water volume or pressure from hydrants can result from: open water mains. open isolation valves. greater demand than the system can provide. the use of both wet-barrel and dry-barrel hydrants in the same system.

greater demand than the system can provide.

A slow-moving, smoldering fire that burns dead organic matter on the soil in forested areas is called a ______ fire. (709) [4.3.19] flank surface crown ground

ground

Pump-type water extinguishers are intended primarily for use on: (260) [4.3.16] ground cover fires. Class D fires. Class B fires. energized electrical equipment.

ground cover fires.

What is the term for the partly decomposed organic material on a forest floor

ground duff

Subsurface fuels are challenging to deal with because they are

hard to locate

When compared with a narrow-angle fog pattern, a wide-angle fog pattern: (623-624) [4.3.10] has a shorter reach than a narrow-angle fog pattern. is less affected by wind than a narrow-angle fog pattern. has more forward velocity than a narrow-angle fog pattern. is more effective at suppressing fires than a narrow-angle fog pattern.

has a shorter reach than a narrow-angle fog pattern.

Horizontal ventilation can be employed effectively in a basement if the basement: (523) [4.3.11] consists of one small compartment. has ground level windows or below ground level windows in wells. consists of a large open plan. has interior stairs.

has ground level windows or below ground level windows in wells.

In order to remain safe during overhaul, firefighters should always wear SCBA when necessary and: (742) [4.3.13] carry as few tools as possible in order to reduce exhaustion. work in teams of four or more. carry a thermal imager and a power saw. have a charged hoseline on standby.

have a charged hoseline on standby.

When service testing a fire hose, it is necessary to: Select one: a. have access to a water source that is sufficient for charging the hose. b. complete all testing during daylight hours. c. test the hose in conditions that simulate a real fire scene. d. test the hose inside the apparatus bay so that it is protected from weather and elements.

have access to a water source that is sufficient for charging the hose.

It can be assumed that the patient's airway is clear if: (1031) [6.2.1] the patient has no history of breathing problems. the patient is laying on his or her back. he or she is able to talk. he or she is moving at all.

he or she is able to talk.

Most line-of-duty deaths at ground cover fires result from: (717) [4.3.19] smoke inhalation. lightning. falling debris. heart failure.

heart failure.

For firefighters, the environment may remain tenable as long as: (436) [4.3.5, 4.3.9] the IC determines it is safe to remain inside. heat levels and duration of the interior operations stay within acceptable limits for the PPE and SCBA provided. they are wearing PPE and SCBA. they are wearing the highest levels of PPE and SCBA designated for rescue operations.

heat levels and duration of the interior operations stay within acceptable limits for the PPE and SCBA provided.

A fuel's chemical content influences its heat release rate and its: (136) [4.3.11] heat of combustion convective flow physical attributes organic compounds

heat of combustion

Fire spreading from a wall to a nearby couch due to radiant heat transfer is an example of: (174) [4.3.11] heat reflectivity heat conductivity insulation conduction

heat reflectivity

The location near where a wildland fire began is the

heel

Tactical ventilation is performed during fire attack to: (493) [4.3.11, 4.3.12] quickly extinguish a fully developed fire. help control the fire. limit the need for LDH hose streams. minimize personnel needed on scene.

help control the fire.

The first priority in a structural collapse rescue is to:

help untrapped victims to a safe area.

Manual bolt cutters cannot cut hasps, padlock shackles, or:

high-security chains

The air-aspirating foam nozzle used with an aqueous film forming foam (AFFF) extinguisher produces: (262) [4.3.16] higher quality foam than a standard extinguisher nozzle. foam that is ideal for fighting Class A fires. foam that is ideal for fighting Class D fires. lower quality foam than a standard extinguisher nozzle.

higher quality foam than a standard extinguisher nozzle.

The flow path of a structure fire is comprised of two regions: the ambient air flow in and the: (161) [4.3.11] hot exhaust flow out. ambient air flow out. cool air subsidence. ceiling jet.

hot exhaust flow out.

Only personnel directly involved in resolving the emergency are allowed within the:

hot zone.

Most building codes rate construction types according to: (165) [4.3.11] how long each construction type maintains its structural integrity over a certain period of time. the size, type, and capability of fire suppression systems. the ratio of the typical number of occupants to the number of egress points. the size of each compartment relative to the total square footage of the structure.

how long each construction type maintains its structural integrity over a certain period of time.

When a patient loses a large amount of blood, he or she is at risk of going into ______ shock. (1040) [6.2.1] anaphylactic hypovolemic neurogenic cardiogenic

hypovolemic

Before entering a structure, the attack crew leader and every crew member should

identify potential emergency escape routes

One limitation of thermal imagers is that: (453) [4.3.9] they may not be able to help improve visibility in an obscured environment. if a structure is carpeted, they may not be able to detect fire on the floors below. they have a fairly long instrument response time. there are no fixed standards for interpretation of data.

if a structure is carpeted, they may not be able to detect fire on the floors below.

During a medical response, eye protection is: (1028) [6.2.1] typically provided by a helmet faceshield. important because the eyes are a route for disease entry. not as important as respiratory protection, because diseases are not spread through the eyes. typically provided by a Bourke eye shield.

important because the eyes are a route for disease entry.

An advantage of using thermal imagers during search and rescue operations is: (452) [4.3.9] the ability to detect fires through carpeted floors. improved visibility in an obscured environment. detection of people under or behind furniture and on the opposite side of walls. the ability to see through water, glass, and other reflective surfaces.

improved visibility in an obscured environment.

When performing a positive-pressure attack, the exhaust openings must be located: (510) [4.3.11] on the main floor of the structure. on the upwind side of the structure. on the downwind side of the structure. in the fire compartment.

in the fire compartment.

During the ______ stage of fire development, the three elements of the fire triangle come together and the combustion process begins. (146) [4.3.11] incipient rollover growth decay

incipient

When an extinguishing agent is determined to be safe and effective for use on combustible metals, it will: (257) [4.3.16] include application instructions on the faceplate. include the test results on the faceplate. be a different color than extinguishers designed to extinguish other classes of fire. be given a numerical rating based upon the amount of fire it can extinguish.

include application instructions on the faceplate.

Under normal conditions, air management increases your work time, but if you are lost or trapped, it: (434) [4.3.5, 4.3.9] will decrease your survivable time before rescue and increase your energy output. increases the amount of time you can survive before escaping or being rescued. will not be effective, because adrenaline and stress will drastically increase your consumption rate. decreases the amount of time you can survive before escaping or being rescued.

increases the amount of time you can survive before escaping or being rescued.

As a fire within a compartment consumes oxygen, the amount of unburned fuel in combustion products: (494) [4.3.11] may either increase or decrease. increases. stays the same. decreases.

increases.

If a firefighter aims a solid or straight stream at the ceiling so that water will rain down and extinguish the burning item, he or she is using a(an): (678) [4.3.10] direct attack. indirect attack. combination attack. transitional attack.

indirect attack.

An extinguishing agent, such as dry chemical or Halon-replacement agent, terminates the combustion reaction by: (144) [4.3.11] interfering with the chemical chain reaction. cutting off the oxygen supply to the fuel. cooling the fuel below the ignition temperature. reacting with the fuel to create a fire-resistant layer.

interfering with the chemical chain reaction.

A firefighter should not turn off electricity to an entire building until he or she is ordered to, because it: (689) [4.3.18] makes it harder for firefighters to work inside the building when there is no electricity. would be an inconvenience to occupants to have the utilities turned off. can cause unforeseen issues with forcible entry and overhaul operations. is necessary to operate essential systems such as elevators and HVAC systems.

is necessary to operate essential systems such as elevators and HVAC systems.

Patches of unburned fuel inside the perimeter of a ground cover fire are called: (713) [4.3.19] flanks. fingers. islands. greens.

islands.

When selecting the appropriate PPE to wear at a medical response: (1027) [6.2.1] it is always better to wear the minimum amount of PPE required. firefighters should wear whatever PPE they arrived in at the scene. it is always better to wear too much PPE than not enough. firefighters should borrow PPE from EMS personnel.

it is always better to wear too much PPE than not enough.

When establishing a perimeter, firefighters must remember that: (759) [4.3.8, 4.3.14] the perimeter cannot be established until uniformed law enforcement personnel are on scene. it is more important to focus on fire suppression than it is to put up scene boundaries. the perimeter should start small and then be enlarged as needed. it is easier to start with a larger perimeter and downsize it later than to start small and enlarge it later.

it is easier to start with a larger perimeter and downsize it later than to start small and enlarge it later.

With increasing safety standards, many vehicle manufacturers use _____ safety glass in all windows.

laminated

A Nader bolt and a U-bolt are two types of _____ found on vehicles.

latching mechanisms

In order to conduct an effective search operation, firefighters must know the: (450) [4.3.9] location of the nearest water supply. layout or floor plan of the building. time the next apparatus will respond. age of the building.

layout or floor plan of the building.

Friction loss is affected by the: (627-628) [4.37, 4.3.8, 4.3.10] number of firefighters handling the hoseline. length of the hose lay. geographic location. weather conditions.

length of the hose lay.

A portable fire extinguisher must be labeled with the: (254) [4.3.16] letters and/or symbols that designate its class rating. type of PPE required to be worn while operating. name of the purchasing department. colors that designate its class rating.

letters and/or symbols that designate its class rating.

When coordinating ventilation with search and rescue, ventilation should be delayed until: (499) [4.3.11, 4.3.12] search and rescue has been conducted. the fire is fuel-limited. the fire is ventilation-limited. lines are charged and crews are ready.

lines are charged and crews are ready.

If you are near the downed firefighter when a MAYDAY transmission is made: (469) [4.2.4, 4.3.5] immediately rush to assist with the rescue. immediately ventilate the area. listen closely for your orders after the transmission and do not freelance. exit the area immediately.

listen closely for your orders after the transmission and do not freelance.

An atmosphere is considered hazardous if it contains a hazardous gas in excess of 10 percent of the hazardous material's: (443) [4.3.21] upper combustible limit (UCL). ignition range. lower explosive limit (LEL). flammability threshold.

lower explosive limit (LEL).

Vehicle components made with _____ can cause high heat fires at a vehicle incident.

magnesium

In order to maintain the integrity of a protected stairwell during a fire, firefighters should:

maintain door control.

A ______ extinguisher requires the operator to apply pressure to a pump that increases pressure within the container and forces the agent out the nozzle. (260) [4.3.16] manual pump stored pressure manual cartridge pressure cartridge

manual pump

Ventilation equipment that fails inspection should be: (505) [4.5.1] replaced as soon as possible. used for training purposes only. used with caution. marked out of service.

marked out of service.

Type IV buildings are resistant to structural collapse because of the:

mass of the heavy timber structural members.

When using natural ventilation, the amount of time firefighters have to use the improved conditions: (507) [4.3.11, 4.3.12] is generally three to five minutes. may be less than a minute. is generally five to ten minutes. is unlimited.

may be less than a minute.

When fire suppression and salvage are performed simultaneously, opening and closing doors to carry building contents outside: (752) [4.3.14] should have no effect on fire growth. may interfere with the flow path. should be done after conclusion of all other salvage operations. wastes time and effort, so doors should be propped open.

may interfere with the flow path.

When making initial assignments, the acting Incident Commander

may place the company into action with a crew member serving as an acting company officer

Lakes, ponds, and rivers are all static water sources that: (595) [4.3.15] can be used if chemicals are added to purify the water. may provide water through drafting operations. may not be used for drafting because the water is nonpotable. should be used as a last resort because of potential contaminants.

may provide water through drafting operations.

Because unprotected stairs are not enclosed with fire-rated construction, they:

may serve as a flow path for fire and smoke.

Roofs with several layers of composition shingles or other roof coverings: (517) [4.3.12] can use sounding as the only means to determine stability. cannot be sounded and shingles must be removed to reveal underlying structure. will not sound solid when any damage has occurred. may sound solid even though fire may have severely damaged roof supports.

may sound solid even though fire may have severely damaged roof supports.

Fires in windowless buildings usually require ______ ventilation for removal of smoke. (523) [4.3.12, 4.3.11] natural hydraulic mechanical combination

mechanical

The most common type of factory built home that firefighters will encounter is the _____ home.

mobile

The three necessary parts of a water shuttle operation are the dump site at the fire, the fill site at the water source, and: (595-596) [4.3.15] a secondary static water source. collapsible storage tanks to hold the water. jet siphon devices. mobile water supply apparatus to haul the water.

mobile water supply apparatus to haul the water.

If there is heavy smoke or extreme heat in a compartment that is being searched, rescuers should: (458) [4.3.9] move below the smoke level. attempt to extinguish the fire. check the heat signature with a thermal imager. stand to get a better view.

move below the smoke level.

When removing a firefighter with functioning SCBA from a hazardous location: (475) [4.3.9] remove the firefighter's facepiece and inspect it before continuing. reconnect the firefighter's facepiece to the SCBA tank. connect the firefighter's facepiece to another SCBA. move the firefighter carefully so as not to dislodge the mask.

move the firefighter carefully so as not to dislodge the mask.

In order to ensure firefighter safety in case of rapid egress, window security bars and grilles:

must be removed or disabled when interior operations begin.

If an exterior wall must be breached during search and rescue operations, rescue personnel: (454) [4.3.9] should maintain contact with the search line or hoseline. must coordinate with the rapid intervention crew before making the opening. should provide the IC with a personnel accountability report (PAR). must coordinate with the IC and ventilation teams before making the opening.

must coordinate with the IC and ventilation teams before making the opening.

In a compartment fire, the interface between the hot gas layers and cooler layer of air is commonly referred to as the: (150) [4.3.11, 4.3.12] neutral plane. no pressure zone. zero balance plane. neutral pressure interface.

neutral plane.

Type II construction buildings are composed of:

noncombustible materials that do not add to the fuel load.

When using a fog nozzle, as the fog pattern widens, the: (627) [4.3.7, 4.3.10] friction loss in the hoseline becomes less. nozzle reaction decreases and makes the nozzle easier to handle. friction loss in the hoseline becomes greater. nozzle reaction increases and makes the nozzle harder to handle.

nozzle reaction decreases and makes the nozzle easier to handle.

The firefighter in command of the incident must understand alarm assignment, which means that they must know the

number and types of units that respond to each alarm

When determining the size of hoseline to use, the crew leader evaluates fire conditions and the

number of firefighters available to advance the hoseline

Which type of information is typically included on a postincident report?

number of personnel and apparatus that responded

Panic, claustrophobia, and disorientation are effects of: (434-435) [4.3.5, 4.3.9] chronic exposure to products of combustion. obscured vision conditions. long-term exposure to radiation. pulmonary edema.

obscured vision conditions.

Extinguish any fire near the ______ first when attacking a vehicle fire. (696) [4.3.7] occupants engine compartment gas tank windshield

occupants

When using a thermal imager to look for hidden fires, the thermal imager may not provide quality images: (743) [4.3.10, 4.3.13] when a fire is in the incipient stage. of items behind reflective metal or glass. of spaces concealed behind walls. when room temperatures reach 100 degrees F (38 degrees C).

of items behind reflective metal or glass.

What is a guideline for conducting fire and life safety surveys in residential homes

offer constructive solutions for correcting or eliminating hazards

What is a guideline for conducting fire and life safety surveys in residential homes a. Help develop an emergency exit plan b.In teams of two or more firefighters c. May be needed as evidence if there is a fire in the home d. offer constructive solutions for correcting or eliminating hazards

offer constructive solutions for correcting or eliminating hazards

Manual stop switches on escalators are generally located:

on nearby wall or handrail supports at the top and bottom of the unit.

When performing wind assisted natural horizontal ventilation, windows and doors: (506) [4.3.11] on all sides of the structure should be opened simultaneously. on the upwind side of the structure should be opened first. nearest the seat of the fire should be opened first. on the downwind side of the structure should be opened first.

on the downwind side of the structure should be opened first.

Search and rescue marks should be placed: (454) [4.3.9] in the middle of the door, in the middle of the adjacent wall, or in the middle of the adjacent stairs. on the upper third of the door or the upper third of the adjacent wall. on the lower third of the door, the lower third of the adjacent wall, or in the landing of the adjacent stairs. in the middle of the door or the middle of the opposite wall.

on the lower third of the door, the lower third of the adjacent wall, or in the landing of the adjacent stairs.

When two firefighters are operating a small hoseline, the backup firefighter should be positioned: (625) [4.3.7, 4.3.8, 4.3.10] on the same side of the hose as the nozzle firefighter. at least eight feet (2.5 m) behind the nozzle firefighter. on the opposite side of the hose as the nozzle firefighter. at least five feet (1.5 m) behind the nozzle firefighter.

on the same side of the hose as the nozzle firefighter.

In order to avoid overloading a ladder when advancing a hoseline up it, : (612) [4.3.10] only uncharged hoselines should be hoisted. only one firefighter should be on a section of ladder at a time. utility straps should be used to secure uncharged hoselines when hoisting. no more than two firefighters should be on a section of the ladder at a time.

only one firefighter should be on a section of ladder at a time.

As part of general nozzle inspection and maintenance, firefighters should: (618-619) [4.3.10] look for external damage to the nozzle body and tip. clean the nozzle with industrial strength cleaner after each use. be able to perform technical maintenance or repairs. replace the swivel gasket each time after use.

ook for external damage to the nozzle body and tip.

A compartment is any: (170) open space with no complete fire barrier dividing it. bay, cell, chamber, vault or cubicle within a building. space divided into separate areas. enclosed space within a building.

open space with no complete fire barrier dividing it.

Once an LPG fire or emergency has been terminated, firefighters should NOT: (692) [4.3.18] wear SCBA. open the LPG tank control valve. leave the hot zone until the utility company arrives. remain in the immediate incident area.

open the LPG tank control valve.

Before entering the building or fire area, the firefighter who is assigned to the nozzle of the attack hose should: (674) [4.3.8, 4.3.10] open the nozzle fully to check for adequate flow. wait to call for water until the entry door is propped open. open the nozzle hallway once he or she reaches the fire compartment. wait to call for water until they are several steps inside the structure.

open the nozzle fully to check for adequate flow.

When performing positive-pressure ventilation in commercial and multistory buildings, a main problem in above-ground operations is coordinating the: (513) [4.3.11, 4.3.12] property conservation efforts. search and rescue efforts. opening and closing of doors in stairwells used to ventilate the building. operations with other ventilation types.

opening and closing of doors in stairwells used to ventilate the building.

The smothering method of extinguishment is most frequently used in which wildland operation

overhaul

When a firefighter controls doors and windows during fire attack, it is an example of: (671) [4.310, 4.3.11] chemical flame inhibition. temperature reduction. fuel removal. oxygen exclusion.

oxygen exclusion.

Materials that burn at normal oxygen levels will burn more intensely in ______ atmospheres. (143) [4.3.11] oxygen-enriched oxygen-deficient flaming nonflaming

oxygen-enriched

On a preincident survey diagram, common symbols are often used to show

partitions and openings

On a preincident survey diagram, common symbols are often used to show a. A passive smoke control system b. partitions and openings c. Removal of fire detection and suppression systems d. Those features may affect fire fighting tactics in that occupancy

partitions and openings

When performing chest compressions on an adult, the: (1034) [6.2.1] rescuer must first determine that the patient does not have a communicable disease. rescuer must first attempt to use an automatic external defibrillator. patient must be on a soft, supportive surface. patient must be on a hard surface on his or her back.

patient must be on a hard surface on his or her back.

The open web design of truss joints:

permits rapid fire spread in multiple directions.

A rain roof is described as a:

pitched roof built over a flat roof for aesthetic or drainage purposes.

Firefighters should take note of ______ because it may indicate that the fire was intentionally set. (761) [4.3.8, 4.3.13] wind direction locked doors plastic containers temperature

plastic containers temperature

What is the area between the fingers of a wildland fire

pocket

The presence of photovoltaic roofs must be identified during preincident planning because they:

pose a significant trip and electrical hazard to firefighters working on the roof.

Actions such as opening a bypass valve on a cylinder, sharing air, and breathing directly from the cylinder are: (438) [4.3.5, 4.3.9] unlikely to occur at a search and rescue operation. never allowed according to SOPs. suggested responses to structural collapse. possible solutions to air emergencies.

possible solutions to air emergencies.

Sliding doors are often used as:

power-operated storefront entrances.

To be physically and mentally prepared for survival during search and rescue operations, you should: (434) [4.3.5, 4.3.9] allow the IC to look out for your crew members' safety. practice emergency exit techniques. push yourself past your limits. follow orders without question.

practice emergency exit techniques.

An advantage of marking with latch straps is that they: (454) [4.3.9] keep the door closed. are more fire resistant than other types of markers. are more visible than other types of markers. prevent the door from closing.

prevent the door from closing.

When any evacuation signal is given, all exiting crews must: (469) [4.2.4, 4.3.5] ensure that all victims have been evacuated before leaving the structure. confirm the evacuation order with the IC before exiting the structure. proceed to a designated safe area outside the collapse zone. activate their personal alert safety system (PASS) devices.

proceed to a designated safe area outside the collapse zone.

If there is a concern that an unattached structure contains hazardous chemicals or flammable/combustible liquids, firefighters should: (706) [4.3.8] protect exposures and let the structure self-extinguish. go inside to check for victims, and then vacate the area. use foam to extinguish the fire and coat the hazardous materials. call for a hazardous materials team to perform salvage.

protect exposures and let the structure self-extinguish.

When a shed or other unattached structure is on fire, the primary objective is to: (706) [4.3.8] protect exposures. save the contents of the building. fight the fire from the interior. remove the fuel source.

protect exposures.

Overhead rolling steel fire doors are commonly used to:

protect fire wall openings in industrial occupancies.

Stairs that are part of the required means of egress and are built to resist the spread of fire and smoke are known as:

protected stairs.

After the scene has been stabilized, the next priority is to:

provide basic patient care to accessible victims.

Type V construction buildings may have a veneer of stucco, brick, or stone that:

provides little fire protection.

The Heath Insurance Portability and Accountability Act (HIPAA) : (1022) [6.2.1] does not apply to firefighters. provides firefighters with insurance against fraudulent medical claims. provides regulations for distribution of protected medical information. only applies to firefighters who are also certified paramedics.

provides regulations for distribution of protected medical information.

Fire department line personnel are responsible for

providing emergency services to the public

When solid fuels are heated, they begin to ______ and release fuel gases and vapors. (139) [4.3.10, 4.3.11] pryolize melt hypoxilize evaporate

pryolize

VEIS is only intended for: (465) [4.3.9] rooms in the interior of the structure. rapid rescue of victims and the isolation of individual rooms. rooms that are involved with the fire or show conditions of flashover. larger structural searches.

rapid rescue of victims and the isolation of individual rooms.

Cast iron may crack or shatter when it is: Select one: a.used as a decorative structural element. b.in contact with direct flames. c.rapidly cooled with water. d.heated indirectly.

rapidly cooled with water.

Fire hose testing records should include the: Select one: a. last date that the hose was used. b. reason that any hoses fail the test. c. kind of solvent used to clean the hose. d. type of incident the hose was last used in.

reason that any hoses fail the test.

The purpose of salvage operations is to: (746) [4.3.14] reduce further damage to the building and its contents from water, smoke, and heat. determine how and why the fire started. remove harmful contaminants and toxic gases from the atmosphere. locate and extinguish fires hidden in concealed void spaces.

reduce further damage to the building and its contents from water, smoke, and heat.

When firefighters apply water to the hot gas layer in a compartment, it will: (670) [4.3.10] increase the potential for flashover. increase the radiant heat flux from the upper layer. reduce the radiant heat flux from the upper layer. push fire into adjacent rooms.

reduce the radiant heat flux from the upper layer.

During overhaul, prying tools can be used to: (740) [4.3.10, 4.3.13] install temporary window coverings. move loosely piled materials. remove baseboards and window frames. carry debris or smoldering materials.

remove baseboards and window frames.

A hydrant wrench is primarily used to: (590) [4.3.15] repair the hydrant if it is out-of-service. remove discharge caps from the hydrant outlets. apply a hose clamp near the hydrant outlet. tighten hose couplings at the apparatus outlets.

remove discharge caps from the hydrant outlets.

When moving from one patient to another: (1028) [6.2.1] remove old gloves and don a new pair. it is acceptable to continue using the same gloves if the patients are related. it is okay to continue using the same gloves if you know the patients are not contagious. rinse off the gloves in warm water before reusing them.

remove old gloves and don a new pair.

During salvage operations, a dewatering device would be used to: (749) [4.3.14] stop water that is flowing from an activated sprinkler. remove water from rugs and furniture. reduce the amount of water discharged by the hoseline. remove water from a basement.

remove water from a basement.

The ______ lay can delay initial fire attack because attack hose, tools and equipment must be removed from the apparatus and placed at the fire scene before the apparatus proceeds to the water source. (603-605) [4.3.15] reverse forward combination standard

reverse

When hose is laid at the incident scene and the pumping apparatus proceeds to the water source, the operation is known as a: (603605) [4.3.15] standard lay. forward lay. reverse lay. backward lay.

reverse lay.

Rooms or closet areas where the door can be closed to prevent the spread of heat, smoke, and toxic gases into that space are called: (436) [4.3.5, 4.3.9] escape rooms. safe havens. protective units. fireproof assemblies.

safe havens.

Overhaul operations include: (740) [4.3.10, 4.3.13] searching for and rescuing victims. searching for hidden fires. performing equipment inspections. setting up scene security devices

searching for hidden fires.

A crew leader is responsible for

selecting the tools the crew needs to perform their duties

Burst hoselines will cause water pressure to decrease or stop and: (607) [4.3.10] can be used, but only as supplemental hoselines. should be repaired. can be used as long as there is still some pressure. should be replaced.

should be replaced.

The backup hoseline at an incident

should be the same size and provide the same flow rate as the attack line

When using the minuteman load, the hose: (606) [4.3.15] will require more personnel to carry than other loads. will drag along the ground toward the incident scene. is more likely to become tangled than with other loads. should deploy with fewer kinks and bends than other loads.

should deploy with fewer kinks and bends than other loads.

When making the operational assignments, the Incident Commander

should only assign a crew to fire attack if enough personnel are present

CPR should NOT be performed if a patient: (1034) [6.2.1] will be transported to the hospital via helicopter. has already undergone defibrillation. could be potentially contagious. shows irreversible signs of death.

shows irreversible signs of death.

Replace any spark plug that: Select one: a. shows signs of arcing. b. has been used for more than 6 months. c. is not stamped with the date of manufacture. d. is covered in oil and grime.

shows signs of arcing

Which passenger safety system is commonly called air bags or side curtain air bags?

side-Impact Protection Systems (SIPS)

Before entering into the hot zone, personnel must:

sign in to the personnel accountability system

Firefighters working on flat roofs are likely to encounter obstacles that penetrate through the roof, including:

skylights.

A(n) ________ may allow water to be applied sooner, but may not provide adequate water flow for extinguishment

small-diameter hoseline

Positive pressure ventilation involves artificially raising pressure inside the structure so that: (507) [4.3.11, 4.3.12] fresh air circulates in the interior. smoke and fuel gases move toward lower-pressure openings more quickly. fresh air from outside moves in more quickly. smoke and fuel gases will have limited movement.

smoke and fuel gases move toward lower-pressure openings more quickly.

When ventilation does not release heat and smoke directly above the fire,: (501) [4.3.12] the fire has stopped increasing in growth. some routing of smoke becomes necessary. the type of fire attack should be changed. ventilation activities should not be used any longer.

some routing of smoke becomes necessary.

Command should never be transferred to

someone who is not on scene

The ______ effect occurs when heated smoke and fire gases travel upward and then spread horizontally and stratify. (525) [4.3.12] rise compartment stack smoke

stack

If an LNG tank on a vehicle leaks or is on fire, firefighters should: (701) [4.3.7] apply water using a narrow fog pattern. allow the fire to burn itself out. proceed with operations as normal. stay clear of the vapor cloud.

stay clear of the vapor cloud.

While in a structure searching for a downed firefighter, the RIC should: (474) [4.3.9] stop frequently and briefly remain silent. start the search closest to the fire. radio to Command as they head from one room to another. open closed doors in order to prevent backdraft.

stop frequently and briefly remain silent.

When performing a transitional attack, a ______ stream may be the best choice because it will not upset the thermal layering as much as other stream patterns. (679) [4.3.10] fog broken straight shielded

straight

Mechanical ventilation is designed to: (508) [4.3.11, 4.3.12] supplement effects of natural ventilation. replace natural ventilation. counter effects of natural ventilation. reduce effects of natural ventilation.

supplement effects of natural ventilation.

Sawdust ignites more easily than a log because the sawdust has a higher: (140) [4.3.11] surface-to-mass ratio pyrolysis point fuel thickness proportion flammable (explosive) range

surface-to-mass ratio

When a large smoldering item, such as a mattress, is encountered during overhaul, it is often most effective to extinguish it by: (745) [4.3.13] applying water to it using a straight stream. using Class B foam. leaving it in place and covering it to smother the oxygen. taking it outside the structure to extinguish.

taking it outside the structure to extinguish.

Hydrogen cyanide (HCN) is a product of combustion that: (126) [4.3.11] targets the brain after being inhaled, ingested, or absorbed into the body. is equally as toxic as carbon monoxide (CO). is released when wood and other natural materials are burned. acts as a respiratory stimulant, increasing respiratory rate and increasing oxygen to blood cells.

targets the brain after being inhaled, ingested, or absorbed into the body

When service testing a fire hose, the: Select one: a. hose should be tested by just one person, so there is no confusion. b. testing area should be kept as dry as possible. c. hose should be tested three times to verify that there are no errors in testing. d. test should be conducted on a soft surface, such as grass or dirt.

testing area should be kept as dry as possible.

During a wide-area search, every team member is equipped with a: (463) [4.3.9] tether line. thermal imager. high-capacity SCBA cylinder. backup SCBA cylinder.

tether line.

The controlled opening near the Command Post is monitored by:

the Accountability Officer.

If air monitoring indicates that the oxygen level in the atmosphere is below 19.5 percent,: (443) [4.3.21] SCBA is no longer necessary for rescuers in the area. the area is said to be an oxygen-enriched environment. the IC or Incident Safety Officer should be notified. respiratory protection other than SCBA must be used.

the IC or Incident Safety Officer should be notified.

The structural integrity of a building is most affected by the intensity of the fire and: (742) [4.3.10] the ambient weather conditions. the amount of water used for extinguishment. the number of personnel operating on upper floors of the building. whether an accelerant was used to start the fire.

the amount of water used for extinguishment.

Positive-pressure attack is only effective if the location of the fire is known and: (510) [4.3.11] the appropriate exhaust-to-intake ratio (greater than 1 to 1) can be achieved. both horizontal and vertical ventilation are possible. water is being applied to the seat of the fire. there are no nearby exterior exposures.

the appropriate exhaust-to-intake ratio (greater than 1 to 1) can be achieved.

Firefighters should continue to wear SCBA and monitor the environment until: (508) [4.3.11, 4.3.12] no smoke or gases are visible. the atmosphere is confirmed to be safe. overhaul activities are initiated. the incident is stabilized.

the atmosphere is confirmed to be safe.

When selecting the appropriate type of portable fire extinguisher to use for a situation, it is important to consider: (266) [4.3.16] the class of fuel that is burning. the time of day. whether a foam agent is available. how many times the extinguisher has been refilled.

the class of fuel that is burning.

Once it is determined that collapse is imminent,: Select one: a.the primary search must be completed, and then the building should be evacuated. b.the collapse zone should be cleared as soon as possible. c.the interior crews should remain working until they recover all victims. d.everyone who is not directly related in suppression or rescue must leave the collapse zone.

the collapse zone should be cleared as soon as possible.

Nozzles should be stored with: (618-619) [4.3.10] the control valve bale in the open position. the control valve bale in the closed position. some water remaining inside so they don't rust. the hoses inside apparatus compartments.

the control valve bale in the closed position.

Advancing an uncharged hoseline down a flight of stairs is only recommended when: (608-609) [4.3.10] there is an immediate need for water. the fire is minor or not present. there are at least four firefighters on the hoseline team. the primary search has been completed.

the fire is minor or not present.

A safety zone should be large enough

the fire shelters are not needed to prevent injury

Cutting an inspection hole helps determine: (518) [4.3.12] possible exposures. potential for survivors. the location of the fire. wind direction.

the location of the fire.

Your point of no return is based on: (437) [4.3.5, 4.3.9] how many members are on the rescue team. the highest cylinder gauge reading of any member of the team. the lowest cylinder gauge reading of any member of the team. how many people need to be rescued.

the lowest cylinder gauge reading of any member of the team.

In the fire environment, convection usually involves the transfer of heat through: (132) [4.3.11, 4.3.12] the movement of hot smoke and fire gases. electromagnetic energy waves. direct contact with a heat source. intermittent contact with a heat source.

the movement of hot smoke and fire gases.

If the ignition is not accessible in nonelectric vehicles, shut down the electrical system by disconnecting the negative cables to the vehicle's 12-volt battery by cutting or removing:

the negative cable first.

Unusual glass or metal fragments at a fire scene may indicate: (762) [4.3.8, 4.3.13] the presence of an incendiary device. that an accelerant liquid was used. potential structural collapse. that the fire was accidental.

the presence of an incendiary device.

When responding to a fire in a Type I construction building, firefighters should be aware that:

the roof may be extremely difficult to penetrate.

A dry-barrel hydrant only has water in it when: (588) [4.3.15] the stem nut is operated to open the control valve. a water main has broken. a clapper valve has been opened. the temperature outside is above freezing.

the stem nut is operated to open the control valve.

Little or no water runoff from the interior of the structure can be an indicator that: Select one: a.fire suppression was effective. b.fire suppression was not effective. c.the structure is retaining water and at risk of collapse. d.the structure is stable, because the fire has been put out.

the structure is retaining water and at risk of collapse.

During a secondary search, rescuers should not remove SCBA until: (456) [4.3.9] there are no visible flames. the supervisor or safety officer determines that the atmosphere is safe. it is determined that there are no remaining victims. the room is clear of smoke.

the supervisor or safety officer determines that the atmosphere is safe.

When responding to an elevator entrapment rescue,:

there are no consistent sequential steps to follow.

Escaping to a safe haven is the best option when: (470) [4.2.4, 4.3.5] there is imminent threat of structural collapse. the rest of your team is in the hazard zone. the primary search has been completed. your low-pressure alarm sounds.

there is imminent threat of structural collapse.

Because postincident reports are public legal documents

there may be legal consequences if they are incomplete or incorrect

A minimum of ______ firefighters are needed to perform VEIS if using a ladder. (464) [4.3.9] one two four three

three

When performing vertical ventilation, extend ground ladders at least ______ rungs above the edge of the roof or top of the parapet wall. (515) [4.3.12] two four five three

three

With regard to ground cover fires,: (710) [4.3.19] heavy fuels burn faster than light fuels. tightly compacted fuels burn slower than loosely piled fuels. the more moisture a fuel contains, the more intensely it will burn. the fire will spread more quickly when it can jump between patches of fuels that are spread apart.

tightly compacted fuels burn slower than loosely piled fuels.

One firefighter may be assigned to operate a large hoseline: (626) [4.3.10] only if a master stream device is also in use. to suppress a basement fire. only if smaller hoselines are also in use. to protect exposures.

to protect exposures.

Fire department radio channels should not be used

to send personal messages

Which action would put you in danger at an electrical emergency?

touching a vehicle that is in contact with electrical wires

What is the primary hazard at a vehicle extrication incident?

traffic

Biological waste and aerosol cans are hazards likely to be present in: (706) [4.3.8] above grade structure fires. storage shed fires. below grade structure fires. trash container fires.

trash container fires.

During ground cover fire fighting operations, if an oil well or a pipeline is broken and exposed to fire, firefighters should: (717) [4.3.19] treat the situation like a hazardous materials incident and withdraw. treat the situation like any other ground cover fire incident. apply water from a distance using a master stream device. apply Class A or B foam to any burning fuels.

treat the situation like a hazardous materials incident and withdraw.

If there is a fire in the trunk of a car, the first step is to: (697) [4.3.7] cut out the lid of the trunk using a power saw. use hydraulic tools to pry open the trunk. try to open the trunk using the release lever. use a piercing nozzle to apply water to the fire.

try to open the trunk using the release lever.

The roof ventilation team leader is responsible for ensuring at least ______ means of egress from the roof. (517) [43.12] two three four one

two

Tactical ventilation roof crew members should have a minimum of: (500) [4.3.12] four escape locations. two escape locations. one escape location. three escape locations.

two escape locations.

The balloon throw is used when: (750) [4.3.14] one firefighter is deploying a large salvage cover. covering items outside on a windy day. two firefighters are deploying a large salvage cover. covering items in a small space.

two firefighters are deploying a large salvage cover.

Standard fire hydrants have at least one large steamer connection and: four hose outlet nozzles for 2 1/2-inch (65 mm) couplings. one smaller steamer connection. two smaller steamer connections. two hose outlet nozzles for 2 1/2-inch (65 mm) couplings.

two hose outlet nozzles for 2 1/2-inch (65 mm) couplings.

Which factor would be included in the initial size-up of an incident that is conducted by the first-arriving firefighter?

type of building construction

Portable fire extinguishers are classified according to the: (254) [4.3.16] type of fire they are designed to extinguish. place where they were manufactured. amount of time they have been in service. certification level required to operate them.

type of fire they are designed to extinguish.

The shape of a hose stream is determined by the: (613) [4.3.10] type of nozzle. length of the hose lay. type of pumping apparatus. size of the hoseline.

type of nozzle.

Salvage covers are designed to protect: (747) [4.3.14] tools and equipment that are not in use. firefighters from contaminants. unaffected furniture and areas of the building. the building from trespassers.

unaffected furniture and areas of the building.

When a structural member such as a window, roof or doorway fails, introducing a new source of oxygen to a fire, ______ ventilation has occurred. (164) [4.3.11] unplanned elemental passive natural

unplanned

When turning off the water to a residential structure, firefighters should: (692) [4.3.18] have a backup hoseline standing by. use caution because the electrical ground wire may be connected to the water pipe. obtain a special water shut-off key from the water department. wear full PPE and SCBA.

use caution because the electrical ground wire may be connected to the water pipe.

Protecting property requires firefighters to: (746) [4.3.14] begin loss control after the fire has been extinguished. prioritize property conservation over incident stabilization and life safety. stop fire suppression efforts until the area has been secured. use good loss control techniques throughout the incident.

use good loss control techniques throughout the incident.

When attacking fire in stacked and piled materials ______, then apply water or Class A foam until extinguished. (705) [4.3.8] apply Class B foam or clean agents use hooks or pike poles to break apart material advance until you are at least 5 feet (1.5 m) from the fire's edge advance until you are at least 10 feet (3 m) from the fire's edge

use hooks or pike poles to break apart material

When a transition is made from an offensive interior strategy to a defensive strategy and crew must withdraw from the interior, they should

use the hoseline to protect themselves and guide their withdrawal

Secondary searches: (456) [4.3.9] use the same steps as primary searches. use different steps than the primary searches, but are just as organized. do not require SCBA. and primary searches are conducted by the same personnel.

use the same steps as primary searches.

Which is a characteristic of NIMS-ICS?

uses common terminology and communications

The NFPA defines wildland fires as unplanned and uncontrolled fires burning in

vegetative

The four steps involved in VEIS are: (465) [4.3.9] victim location, evacuation, isolate, search. vent, enter, isolate, search. vent, exit, isolate, save. vent, enter, isolate, substitute.

vent, enter, isolate, search.

Water application to a fire compartment begins to transition the fire from: (498) [4.3.11, 4.3.12] the growth stage to the fully-developed stage. growth stage back to the incipient stage. ventilation-limited to fuel-limited conditions. fuel-limited to ventilation-limited conditions.

ventilation-limited to fuel-limited conditions.

A bump test is performed to: (446) [4.3.21] reset a gas detector to factor default settings. test the amount of carbon dioxide in the atmosphere. verify that a gas detector is functioning properly. test the amount of oxygen in the atmosphere.

verify that a gas detector is functioning properly.

The quantity of wildland fuel available in a specific area is fuel

volume

Access is limited to personnel directly supporting work performed at the site of the actual emergency in the:

warm zone

Hydrants must be opened and closed slowly in order to prevent: (592) [4.3.15] friction loss. hydrant erosion. loss of suction. water hammer.

water hammer.

A _______ is used when a smaller line is needed, but a larger line is still in service.

water thief

The three main influences on ground cover fire behavior are fuel type, topography, and: (708) [4.3.19] type and amount of resources available. number of personnel available. weather. time of day.

weather.

Which question would the first arriving firefighter ask during initial size-up?

what does the visible fire and smoke indicate?

Which piece of information must be communicated to crew members and dispatch when establishing command?

who the acting Incident Commander is

When performing hydraulic ventilation, set the fog nozzle on a pattern: (513) [4.3.11] that directly wets an area around the firefighter on the nozzle. wide enough to cover the exhaust opening. that varies between wide and narrow. narrow enough to direct smoke and gases out the exhaust.

wide enough to cover the exhaust opening.

Regardless of what organization provides EMS services, firefighters: (1022) [6.2.1] will likely provide some level of emergency medical care. should respond to every medical call in their own apparatus. must be trained to the same levels as local EMTs. will be responsible for the medical outcome of the patient.

will likely provide some level of emergency medical care.

Research shows that the safest way for firefighters to attack a fire is

with the wind at their backs

In a Type III construction building, the interior walls, columns, beams, floors, and roofs are completely or partially constructed of:

wood

Which is a guideline for loading hose into an apparatus hose bed?

Keep flat sides of hose in the same plane when two sections of hose are connected

Which condition or feature should be identified and recorded ruing a preincident survey a. Nonworking smoke detectors b. Fire hydrants c. Determine how standard tactics would work in that occupancy d. Use positive statements to tell the audience what to do instead of what not to do

Nonworking smoke detectors

What must a Fire Fighter II be able to do to assist at technical rescue incidents?

Recognize hazards associated with the type of incident

What can be done to help prevent age deterioration in fire hose?

Regularly repack unused hose loads

Wooden tool handles should be inspected for:

Splinters

What types of tools and equipment do search and rescue personnel carry? (452) [4.3.9] Thermal imagers and forcible entry tools pH meters and fluoride test paper Power saws and hydraulic tools Hydraulic rescue equipment

Thermal imagers and forcible entry tools

Why should any brightly colored cables never be touched, cut, or opened on electric vehicles?

They contain intermediate or high-voltage charges.

When ventilating metal roofs, which type of roof can be sliced open with an axe, carbide tip chain saw, or rotary saw and peeled back? (519) [4.3.12] Sheet metal roofs Industrial metal roofs Thin metal roofs Roofs built after 2000

Thin metal roofs

Once an emergency has been reported, the information must be

Transmitted to the responding units or personnel

Which construction classification includes buildings with exterior load bearing walls composed entirely of wood and is commonly referred to as wood frame construction?

Type V

When should you check your SCBA gauge to see how much air you have left? (437) [4.3.5, 4.3.9] Every time a new area or room is reached Within 30 seconds of entering an IDLH atmosphere When the assigned area is reached Every two minutes

When the assigned area is reached

When working on a roof, firefighters should be aware that roof openings or penetrations:

When working on a roof, firefighters should be aware that roof openings or penetrations:

In order to prevent mildew, _____ hose must be dried before being stored

Woven-jacket natural fiber

Ladders are most stable and offer the easiest climbing position when placed at a: Select one: a.distance from the building equal to one-fourth the ladder's working length. b.55-degree angle from the building. c.35-degree angle from the building. d.distance to the building equal to two-thirds the ladder's working length.

a

Life safety rope must be removed from service if it has been: Select one: a.subjected to an impact load. b.used for a water rescue. c.subjected to temperatures below freezing. d.used more than ten times.

a

On an SCBA air cylinder, the pressure gauge is used to: Select one: a.display the amount of air left in the cylinder. b.control the flow of air to the regulator. c.reset the heads-up display when necessary. d.set the working pressure for the cylinder.

a

What is one disadvantage of synthetic fiber rope? Select one: a.Melts when exposed to heat b.Prone to mold and mildew c.Must be replaced often d.Cannot support heavy loads

a

When hoisting a power saw, attach the tag line: Select one: a.through the handle. b.to the largest part of the saw. c.in a circle around the body of the saw. d.to the center part of the saw.

a

Floors at ground level may consist of _____ or a floor assembly made up of joists over a crawl space.

a reinforced concrete slab

If a large pool of flammable liquid is burning in an open area, the _____ method of foam application may be the most effective method to use. Select one: a.rain-down b.roll-on c.bank-down d.spread-across

a. rain-down

A difference in pressure inside and outside a compartment causes

air and smoke flow

The general location where the fire began is known as the: (756) [4.3.8, 4.3.13] area of cause. origin point. focus point. area of origin.

area of origin.

When a ______ is used with a smooth bore nozzle, turbulence can affect the quality of the solid stream if the valve is left partially open. (619) [4.3.10] slide valve small diameter hoseline ball valve large-diameter hoseline

ball valve

A(An) _____ is mounted on an apparatus and uses a centrifugal pump to supply the water for the foam solution and an onboard air compressor to add air to the mixture before discharge. Select one: a.around-the-pump proportioner b.balanced-pressure proportioner c.compressed air foam system (CAFS) d.in-line eductor

c. compressed air foam system (CAFS)

What is the purpose of the United States Fire Administration's National Fire Incident Reporting System (NFIRS)

collect data for analysis to help prevent future fires

How can a firefighter help ensure that they will not be affected by limitations caused by equipment that is in poor condition? Select one: a.Proper facepiece fit testing b.Physical fitness and endurance training c.Repeated training with the SCBA unit d.Frequent inspections and maintenance

d

Which action should be avoided during an incident involving a tanker carrying flammable fuels? Select one: a.Using fire fighting foam b.Applying water for victim protection c.Allowing a lane of traffic to remain open d.Using road flares

d. Using road flares

Before entering the structure to conduct fire attack, the crew should

ensure they have the required forcible entry and communication equipment

The feasibility of opening a floor during fire fighting depends on how it was constructed and: (523) [4.3.12] surrounding furniture. how easily it can be replaced. from what material it was constructed. the value of the floor.

from what material it was constructed.

The ______ stage of fire development occurs when the heat release rate of the fire has reached its peak. (157) [4.3.11] fully-developed incipient growth decay

fully-developed

The unburned part of a wildland fire area is the

green

Which of the following is a component of the wildland fire triangle

heat

The part of a ground cover fire opposite the head that usually burns slowly and quietly is called the: (712) [4.3.19] heel. flank. origin. black.

heel.

A swollen or rigid abdomen is one sign of: (1039-1040) [6.2.1] a communicable disease. cardiac arrest. venous bleeding. internal bleeding.

internal bleeding.

If fire is presented in an underground space, such as a trench or subway

only specially trained rescue units should enter the attack fire

Spalled concrete is an indicator of: (742) [4.3.10] possible loss of structural integrity. arson. the need for additional engine companies. an accidental fire.

possible loss of structural integrity. arson.

When an unprotected opening for pipes or wiring is made through a fire wall,:

the protection provided by the fire wall is reduced or eliminated.

Which type of collapse occurs when the floor and/or roof assemblies on both sides of a load-bearing center wall collapse?

A-frame

What is the last resort for a firefighter in danger of being overrun by a wildland fire

Deploy a fire shelter

During a preincident survey, firefighters can

Determine how standard tactics would work in that occupancy

What is an indicator of structural collapse? Select one: a.Distorted structural members b.Fire in the incipient stage c.Smoke movement through windows d.Absence of reinforcing tie rods

Distorted structural members

Which extinguishing agent should be used for a Class D fire? (257) [4.3.16] Dry powder Dry chemical Wet chemical Class D foam

Dry powder

A separate dispatch center operated by a fire department would be categorized as a

Emergency Service Specific Telecommunications Center

What does the "E" in LCES stand for

Escape routes

Which type of danger do stairs present to firefighters during low-visibility conditions?

Fall hazard

In which type of fuel will a fire spread the most rapidly

Fine

What is usually the main type of fuel present in ground cover fires

Fine

Which type of fire officer is directly in charge of monitoring operational safety at fires and other emergencies

Fire department incident safety officer

What hazard do fire doors potentially pose to firefighters?

Fire doors can automatically close if the fusible link melts.

Which device detects light in the ultraviolet and infrared spectrum in order to alert occupants to fires a. Manual pull station b. Flame detectors c. Fire alarm control panel d. Ionization smoke detectors

Flame detectors

What will a liquid with a specific gravity of less than one do when combined with water? (138) [4.3.10] Float Sink Vaporize Easily mix

Float

At the station, if you cannot answer a caller's question, refer them to someone who can then

Follow up on the request

Which highway/roadway incident hazard would require firefighters in full PPE to stand by with a charged hoseline

Fuel spill

Which vehicle frame is used on larger automobiles and trucks, particularly heavy-duty vehicles that carry or pull heavy loads?

Full or rigid frame

Which fuel is the most susceptible to changes in relative humidity

Grass

In which situation would fuel removal be a likely method of extinguishment? (670) [4.3.19] Fire in an apartment building Fire in a one-story house Grass fire Warehouse fire

Grass fire

What is another term for surface fuels

Ground

What is the most common type of wildland fire

Ground Cover

An electromagnetic lock is an example of a:

High security lock

Which topic would be the potential focus of a fire and life safety program put on by the fire department a. activate their PASS devices. b. use the hoseline to protect themselves and guide their withdrawal c. How to prepare for fire or severe weather d. partner up with other crews and exit at the same time.

How to prepare for fire or severe weather

Which is a guideline when stacking pneumatic lifting devices?

Never stack more than two devices

Which condition or feature should be identified and recorded ruing a preincident survey

Nonworking smoke detectors

Which statement about atypically stressful events is accurate?

Officers should monitor their personnel following an atypically stressful even for signs of PTSD

When an enclosed secondary stairwell is used for evacuating occupants, what should be located at the bottom floor to pressurize the stairwell and keep smoke from entering it? (526) [4.3.12] NPV Fans PPV Fans Both PPV fans and NPV fans Door monitors

PPV Fans

Which tools have a square drive to attach a socket and are ideal for disassembling machinery?

Pneumatic impact tools

A ______ is a guide to decision making within an organization that addresses issues such as working hours, emergency response guidelines, and chain of command

Policy

Which type of tools act as a level to provide mechanical advantage when opening doors and windows or moving heavy objects?

Prying tools

Which is a responsibility of the roof ventilation team? (517) [4.3.12] Report changes they see to the supervisor Determine fire cause and origin Direct hose streams for protection Set up a rehabilitation area

Report changes they see to the supervisor

Which type of nozzle valve controls the discharge pattern of the stream? (620) [4.3.10] Slide valve Ball valve Rotary control valve Gate valve

Rotary control valve

Which rescue saw is typically gasoline powered and has different blades for cutting wood, metal, and masonry?

Rotary rescue saw

What is the purpose of a gusset plate?

Serve as a connection point for wood trusses

A Fire Fighter I would likely be assigned to

Setting up lighting equipment to illuminate a scene

Which type of hose stream is produced from a smooth bore nozzle? (622) [4.3.10] Solid stream Straight stream Fixed stream Fog stream

Solid stream

Wildland fuels that lie under the surface of ground are __ fuels

Subsurface

Modern 911 system capabilities now include _____ and smartphone apps

Texting

When tempered plate glass doors are encountered:

The glass should only be broken as a last resort

For what situation would an incident commander order a trench cut? (520) [4.3.12] Victims are trapped on upper floors Structural collapse is likely The main fire is too large to extinguish The main fire is igniting nearby exposures

The main fire is too large to extinguish

Which type of fire attack involves applying water from the outside of the structure in order to reduce the potential for flashover and make the environment more survivable for an interior attack crew? (679) [4.3.10] Indirect attack Combination attack Direct attack Transitional attack

Transitional attack

Which method would be used to force an overhead door?

Use a rotary saw to cut an opening, then enter and use the lift mechanism to open the door fully

What should be done if none of the doors in a vehicle extrication incident open normally?

Use a tool to release one of the locks

Damage resulting from forcible entry may be reduced by:

Using a lock box, if available

Which rescue saw is quiet, highly portable, easy to handle, and often used for delicate cutting operations?

Whizzer saw

What part of a knot is formed by crossing the side of a bight over the standing part of the rope? Select one: a.Loop b.Round turn c.Safety d.Hitch

a

At a vehicle rescue incident, if firefighters are not engaged in fire suppression or extrication, they should wear:

an approved retroreflective vest.

Which piece of respiratory equipment provides insufficient protection against airborne pathogens? Select one: a.SCBA b.Surgical masks c.HEPA filter masks d.PAPR

b

Class K fires involve: (258) [4.3.16] cooking oils. combustible metals. wood and paper products. energized electrical equipment.

cooking oils.

What is one advantage of natural fiber rope? Select one: a.Resistant to mold and mildew b.Longer life span than synthetic rope c.Can be used for life safety applications d.More resistant to sunlight than synthetic rope

d

Which type of breathing air source would be found inside a high-rise building? Select one: a.Stationary fill system b.High-rise specific cascade system c.Auto-cascade fill system d.Firefighter Breathing Air Replenishment System

d

The most important variable when choosing the correct hoseline to use is

flow rate

The portion of the roof between the supports and the covering is called the:

roof deck.

When ventilating flat roofs, the most common openings are: (518) [4.3.12] straight lines. square or rectangular. circular or oval. triangular.

square or rectangular

Ground cover is an example of a(n) __ fuel

surface

When wind speeds are 10 mph (15 kph) or faster, firefighters are safest working: (501) [4.3.11, 4.3.12] near the center of the structure. while facing the wind. entirely inside the structure. with the wind at their backs.

with the wind at their backs.

A safety precaution when performing vertical ventilation is to work: (515) [4.3.12] with the wind at your back or side to protect yourself from heat, smoke, and embers. only near the center of the roof. only near the corners of the roof. facing the wind so you can better see any changes in fire behavior.

with the wind at your back or side to protect yourself from heat, smoke, and embers.

When operating a portable fire extinguisher, it is safest to approach the fire: (267) [4.3.16] with the wind at your back. with your back to the fire. at a 45-degree angle. with the wind blowing toward you.

with the wind at your back.

In order to safely conduct a primary search, rescuers should: (456) [4.3.9] move slowly and check in with the IC after searching each room. work in teams of two or more. wait to search until the fire has been extinguished. split up to cover a larger area.

work in teams of two or more.

Which type of hose appliance is useful when one attack line has been laid, but two are needed for fire attack?

wye appliance

Where should the perimeter be around an incident involving an explosion? (759) [4.3.8, 4.3.14] 1.5 feet (450 mm) past the farthest piece of evidence 2.5 feet (750 mm) past the structure affected by the blast 2.5 times the size of the structure affected by the blast 1.5 times the distance from the farthest piece of debris

1.5 times the distance from the farthest piece of debris

The maximum diameter of a 1-hour fuel is

1/4" (6mm)

Which NFPA standard covers protective clothing and equipment for wildland firefighting

1977

Traditionally, how large is the collapse zone? Select one: a.1½ times the height of the structure b.1½ times the width of the structure c.2½ times the width of the structure d.2½ times the height of the structure Feedback

1½ times the height of the structure

The distance between fire fighters in a safety zone and the flames should be a minimum of __ times the flame height

4

Typical backpack pumps contain

4-8 gal (15 to 30L)

Stored-pressure water extinguishers are used on Class ______ fires. (260) [4.3.16] A B C D

A

Which strain of hepatitis is transmitted by close contact with individuals and typically has no long-term consequences? (1023) [6.2.1] C B D A

A

How does the level of responsibility of a Fire Fighter I differ from that of a Fire Fighter II

A Fire Fighter II is trained to coordinate Fire Fighter I and Fire Fighter II personnel while working under the supervision of a company officer

Which statement about energy and combustion is accurate? (120) [4.3.11] A fuel's potential energy releases during combustion and converts to kinetic energy. Chemical changes involve an exchange of energy; physical changes involve no energy exchange. A fuel's chemical energy is the result of rapid vibrations in the molecules. Chemical and physical changes almost never involve an exchange of energy.

A fuel's potential energy releases during combustion and converts to kinetic energy.

What causes flaming combustion to occur? (123) [4.3.11] A gaseous fuel mixes with an adequate amount of oxygen and heats to ignition temperature. A solid fuel encounters an open flame and entrain enough air to ignite. A gaseous fuel encounters an external heat source and experience piloted ignition. A solid fuel mixes with an adequate amount of liquid fuel to be able to sustain an open burning flame.

A gaseous fuel mixes with an adequate amount of oxygen and heats to ignition temperature.

How should furniture be grouped during salvage? (752) [4.3.14] Items should be carried outside and placed in a secure, out of the way location. A high piece of furniture should support the salvage cover in a way that allows water to run off and not collect in pools. Items should be carried outside and stacked in an easily accessible location. Stack all items at the same height so that the salvage cover is evenly spread

A high piece of furniture should support the salvage cover in a way that allows water to run off and not collect in pools.

Why should firefighters be outside the fire compartment when making an indirect attack from the interior? (678) [4.3.10] The fire compartment will not be large enough to conduct an effective indirect attack. The hose stream will not reach the target if it is inside the fire compartment. Large volumes of water will make walking areas slippery and dangerous. A large volume of steam will be created.

A large volume of steam will be created.

In which situation would firefighters likely use an air monitoring device? (440) [4.3.21] A car accident requiring victim extrication A medical call where multiple victims have collapsed for an unknown reason When assisting a high-angle rescue team Fire in a trash container

A medical call where multiple victims have collapsed for an unknown reason

Barriers that protect against a fire spread, such as door gaskets and fire stops are an example of

A passive smoke control system

Barriers that protect against a fire spread, such as door gaskets and fire stops are an example of' a. A passive smoke control system b. Automatic dry c. Post indicator Valve (PIV) d. Wet-pipe

A passive smoke control system

What does NFPA 1500 require to be part of fire department training programs

A process for evaluating firefighter skills and knowledge

Which feature is often added to solid-core wood doors and can make forcing the door more difficult?

A sheet metal layer added to increase security

Why do compact fuels burn slowly

AIr cannot circulate as freely

Which acronym describes the mandatory tools carried by a rapid intervention crew? (473) [4.3.9] AWAKE — Air, Water, Axe, K-tool, Extrication PATH — PPE, Axe, Thermal imager, Flashlight PART— PPE, Air monitoring equipment, Radio, Thermal imager AWARE - Air, Water, A Radio, Extrication

AWARE - Air, Water, A Radio, Extrication

Fire and life safety programs benefit firefighters by teaching them

About the people who live and work in their community

Fire and life safety programs benefit firefighters by teaching them a. activate their PASS devices. b. About the people who live and work in their community c. How to prepare for fire or severe weather d. partner up with other crews and exit at the same time.

About the people who live and work in their community

What is a primary hazard of cutting the steering wheel ring?

Accidental deployment of the air bag

In which hose load does the hose lay on its edge in folds that lay next to each other?

Accordion load

What must firefighters be careful about when cutting posts?

Activating seat belt pretensioners or side curtain air bags

When does the secondary search take place? (456) [4.3.9] After the fire is under control During fire suppression operations As soon as resources are available Before fire suppression operations

After the fire is under control

An ______ concept allows all responders to use a similar, coordinated approach with a common set of authorities, protections, and resources

All Hazard

If a building has security bars on the windows:

All bars should be removed to allow emergency egress for inside crews if adequate resources are available

Whose responsibility is it to protect fire cause evidence? (756) [4.3.8, 4.3.13, 4.3.14] All fire department personnel on scene Fire Inspector Specialized law enforcement personnel Fire Fighter I

All fire department personnel on scene

What action should be taken to protect fire hose in extremely cold temperatures when it is only being used intermittently at a fire?

Allow some water to flow through the nozzle when not being used in order to keep it from freezing

Using your PPE to create wind barrier when transmitting on a portable radio is a means to deal with

Ambient noise

Which is a characteristic of non-threaded couplings

An adapter must be used to connect nonthreaded couplings to hydrants

In which situation would a standpipe need to be improvised by stretching a hoseline up an interior stairwell or up the side of the building? (610-611) [4.3.10] An earthquake renders the existing standpipe inoperable. The building on fire is taller than three stories. The existing standpipe is more than 50 years old. The building is in a location without a hydrant nearby.

An earthquake renders the existing standpipe inoperable.

Which type of shock occurs as a result of an allergic reaction? (1041) [6.2.1] Cardiogenic Anaphylactic Neurogenic Septic

Anaphylactic

What is a medical or physical requirement set forth in NFPA 1500

Annual medical exams to verify continued fitness

Which is a guideline for receiving nonemergency calls

Answer calls promptly

Which type of equipment is NOT typically maintained by a Fire Fighter II? Select one: a. Apparatus electrical systems b. Portable generators c. Hydraulic and pneumatic tools d. Portable lighting systems

Apparatus electrical systems

What should the attack team do if they open the door to a structure and observe a low neutral plane and turbulent smoke? (676) [4.3.10] Apply water to the hot gas layer, but stay outside the structure Apply water to the hot gas layer while advancing to the seat of the fire Close the door and use a different entrance to the structure Perform negative pressure ventilation to remove smoke from the compartment

Apply water to the hot gas layer, but stay outside the structure

Which method of attack would put firefighters at the least risk when fighting a residential basement fire? (683) [4.3.10] Applying water through an exterior basement window Entering through an enclosed interior stairwell Advancing down the stairwell while using a fog stream for protection Entering on the first floor and installing a cellar nozzle

Applying water through an exterior basement window

Where should you start the search on the fire floor? (457) [4.3.9] Where victims are most likely to be As close to the fire as possible At the entrance Where victims will be easiest to rescue

As close to the fire as possible

What should firefighters do first if they have questions about departmental regulation

Ask their supervisor for clarification

What type of material is often applied on top of roof decking?

Asphalt shingles

Which type of hose transports water from the pumping apparatus to the nozzle where it is applied to the fire?

Attack hose

Which type of standpipe system contains air under pressure in the pipes, but admits water to the piping when a hose valve is opened

Automatic dry

Which type of standpipe system contains air under pressure in the pipes, but admits water to the piping when a hose valve is opened a. Chemical Pellet b. Automatic dry c. Post indicator Valve (PIV) d. Wet-pipe

Automatic dry

Which type of window has one or more top-hinged, outward-swinging sashes that permit the window to be opened during rain?

Awning window

What ventilation tool would be used to break windows or chop holes through roof decking? (504) [4.3.11, 4.3.12] Pike poles Power saws Chain saws Axes

Axes

Which tools are used to open walls and floors during overhaul? (740) [4.3.10, 4.3.13] Plaster hooks Axes Pike poles Bale hooks

Axes

Multiple fire companies within a response are whose day-to-day functions are overseen by the operations division are called

Battalion

When using power saws for forcible entry, firefighters must:

Be aware of hidden electrical wires and gas lines

Why must forcible entry and door control be coordinated?

Breaking a door or window introduces a new source of oxygen to the fire

Which forcible entry technique changes the ventilation profile of the building because it cannot be undone once completed?

Breaking the glass in the door

What disrupts the ventilation strategy and causes the fire to grow? (494) [4.3.11] Activating sprinkler systems Changing to a transitional attack Removing items from the structure Breaking windows unnecessarily

Breaking windows unnecessarily

What should you do if you become entangled while trying to evacuate a building? (473) [4.2.4, 4.3.5] Remove your SCBA and cut the wires Contact the rapid intervention crew by radio Wait calmly for another firefighter to find you Broadcast a MAYDAY, then attempt to free yourself

Broadcast a MAYDAY, then attempt to free yourself

Which type of hose stream is created by specialized nozzles such as cellar nozzles, piercing nozzles, or chimney nozzles? (624) [4.3.10] Broken stream Straight stream Solid stream Fog stream

Broken stream

Which type of buildings are subject to rapid fire spread because many of the protective features such as gypsum wallboard and automatic fire suppression systems are not in place? (175) [4.3.10, 4.3.11] Buildings under construction Buildings at the wildland/urban interface Buildings with a bowstring truss roof design Commercial buildings constructed prior to 1990

Buildings under construction

Where might firefighters be MOST likely to encounter inoperative standpipes and sprinkler systems? (175) [4.3.10] Buildings under demolition Open-plan commercial structures Residential structures built prior to 1990 Structures at the wildland/urban interface

Buildings under demolition

What is a characteristic of carbon dioxide (C02) extinguishers? (262) [4.3.16] C02 gas displaces oxygen to smother the fire Most effective in extinguishing Class D fires Require freeze protection due to icy discharge C02 gas cools the fire to subzero temperatures

C02 gas displaces oxygen to smother the fire

What should be done when responding to any situation involving electricity?

Call for the electric company to respond

Which is a characteristic of fog nozzles? (616-618) [4.3.10] Cannot be used to apply foam Tend to cause hoselines to kink due to less nozzle pressure Operate at higher nozzle pressures than smooth bore nozzles Can be adjusted to different stream patterns

Can be adjusted to different stream patterns

Wallboard that has been reinforced with Lexan

Can be identified during preincident surveys

Glass shards that result from firefighters breaking windows during forcible entry:

Can create a dangerous surface for firefighters advancing hoselines

Double-swinging doors:

Can often be pried apart sing a rambar or Halligan

Which is a characteristic of smooth bore nozzles? (615) [4.3.10] Cannot be adjusted to different stream patterns Prone to clogging with debris Cannot be used to apply compressed-air foam Operate at higher nozzle pressures than fog nozzles

Cannot be adjusted to different stream patterns

What is another term for aerial fuels

Canopy

Which type of collapse has a good chance of habitable voids but is most vulnerable to secondary collapse?

Cantilever

Which type of bleeding may stop on its own and is characterized by a limited amount of oozing blood? (1038) [6.2.1] Venous bleeding Internal bleeding Capillary bleeding Arterial bleeding

Capillary bleeding

Which type of extinguishing agent is used to extinguish a Class B fire? (256) [4.3.16] Carbon dioxide Wet chemical Dry powder Deionized water

Carbon dioxide

Which product of combustion acts as a chemical asphyxiant by excluding oxygen from the blood, leading to hypoxia of the brain and tissues? (124-125) [4.3.11] Carbon monoxide (CO) Carbon dioxide (C02) Aerosolized fuel particles Hydrogen cyanide (HCN)

Carbon monoxide (CO)

What is the leading cause of firefighter fatalities

Cardiovascular disease

Which type of window has one or two side-hinged sashes and usually opens outward?

Casement window

Which type of roofing material develops its design strength when it is placed into forms and then hardens at the building site?

Cast-in-place concrete

As part of a member assistance program, many fire departments offer tobacco cessation programs because tobacco can

Cause cancer, heart disease, and COPD

For which type of rescue would the Fire Fighter II monitor communication channels and search lines, operate SAR systems, and assist victims once they have been removed from the hot zone?

Cave, mine, and tunnel rescue

Which type of nozzle that is designed for use on fires in confined spaces has a rotating head that distributes water in a circular pattern? (618) [4.3.10] Cellar nozzle Piercing nozzle Adjustable pattern fog nozzle Smooth bore nozzle

Cellar nozzle

What is required for forcible entry operations involving cutting torches?

Charged hoseline standing by

Which action would be performed when overhauling a vehicle fire? (697) [4.3.7] Setting up scene control devices Stabilizing the vehicle Shutting down the vehicle's electrical system Checking for hidden fires in the trunk

Checking for hidden fires in the trunk

Which type of sprinkler mechanism activates the sprinkler after the solder inside melts and releases the valve cap

Chemical Pellet

Which type of sprinkler mechanism activates the sprinkler after the solder inside melts and releases the valve cap a. Chemical Pellet b. Flame detectors c. Riser d. Ionization smoke detectors

Chemical Pellet

Which element of the fire tetrahedron is included to explain flaming (gas-phase) combustion? (120) [4.3.11] Chemical chain reaction Oxygen Heat Fuel

Chemical chain reaction

What is the MOST common source of heat in combustion reactions?(128) [4.3.11] Chemical energy Electrical energy Convective flow Thermal equilibrium

Chemical energy

What is a guideline for performing CPR? (1035) [6.2.1] Chest compressions should continue until the victim moves, breathes, or regains consciousness or until responders with greater training arrive. Stop after every 100 chest compressions to deliver 5 rescue breaths. Rescue breaths should only be given if the patient is an adult. The responder who initiates CPR must be the only one to perform it on the victim.

Chest compressions should continue until the victim moves, breathes, or regains consciousness or until responders with greater training arrive.

When gaining access to a property by forcing a gate, firefighters should:

Choose the method that is effective, but causes the least damage

Which type of valve is used in siamese appliances and fire department connections (FDC) to allow water to only flow in one direction? (601) [4.3.15] Ball valve Gate valve Butterfly valve Clapper valve

Clapper valve

How would a fire containing plastics be classified? (255) [4.3.16] Class A Class C Class D Class K

Class A

What do manufacturers sometimes add to stored-pressure water extinguishers in order to increase their effectiveness? (261) [4.3.16] Class A foam Dry chemical Dry powder Class D foam

Class A foam

On which type of fires are stored-pressure water-mist extinguishers safe and effective to use? (261) [4.3.16] Class C Class B Combustible metal fires Combustible cooking oil fires

Class C

Wet chemical stored-pressure extinguishers are intended for use on ______ fires. (261) [4.316] Class K Class A Class C Class D

Class K

What is a guideline for maintaining personal health?

Clean PPE after every exposure to smoke

A ______ extinguisher should be used in areas with highly sensitive computer equipment because it will cause less damage to the equipment than other extinguishers. (266) [4.3.16] Clean agent Class D class C Carbon dioxide (C02)

Clean agent

Which duty would likely be performed by a Fire Fighter I

Cleaning and inspecting ground ladders

The use of plain English in radio communications transmissions and avoidance of 10-codes is known as using

Clear text

Where are wet-barrel hydrants usually installed? (588) [4.3.15] Climates that do not have long periods of below-freezing temperatures Climates that have a higher than average number of belowfreezing days Rural areas without an alternate water supply Rural areas where multiple departments may need to respond

Climates that do not have long periods of below-freezing temperatures

Which action can protect the egress pathways during a search so that the search team can escape if conditions change rapidly? (458) [4.3.5, 4.3.9] Use an air monitoring device to check for dangerous gas levels in the compartment Only allow one search team in an area at a time Open all doors in the path to make more exit points available Close doors along the egress path after rooms are searched

Close doors along the egress path after rooms are searched

Which is an example of protecting interior exposures? (684) [4.3.10] Performing negative pressure ventilation Closing a door between the fire and unaffected area Deactivating sprinklers once the fire is extinguished Applying water to the hot gas layer

Closing a door between the fire and unaffected area

Before interior attack, what action will reduce oxygen available to the fire? (495) [4.3.11] Directing hose streams on the exterior of the structure Closing exterior doors and windows Directing hose streams to the interior of the structure Opening exterior doors and windows

Closing exterior doors and windows

What causes water hammer? (628) [4.3.7, 4.3.8, 4.3.10] Decreasing the length of the hose lay Closing the nozzle suddenly Increasing the length of the hose lay Closing the nozzle slowly

Closing the nozzle suddenly

Which scene control zone immediately surrounds the other two zones and provides an area for staging personnel and portable equipment

Cold zone

Which hazard is a concern when fighting fires in exterior stacked or piled Class A materials? (704) [4.3.8] Electrocution Backdraft Flashover Collapse

Collapse

Which loads allows hose from one side of a split hose bed to be used for a forward lay and other side to be used for a reverse lay?

Combination load

In addition to structural members, what can be a significant factor influencing fire spread and loss of lives in fires? (169) [4.3.11] Combustible interior finishes and furnishings Gases heavier than air that collect in the lower levels Combustible exterior wall coverings Free radicals released during combustion

Combustible interior finishes and furnishings

Which extinguishing agent is best suited for use in wildland fire operations

Compressed-air foam

The type of personnel accountability system which provides the greatest level of safety, but should only be used as a supplemental safety measure is the

Computed based electronic system

Where would a clean agent extinguisher likely be used? (262) [4.3.16] Computer room fire Structure fire Vehicle fire Commercial kitchen fire

Computer room fire

What is a concern about lath and plaster during a fire? Select one: a.Conceals hidden fires and adds fuel to the fire b.Releases toxic gases when heated c.Shows signs of spalling when exposed to fire d.Stretches when heated

Conceals hidden fires and adds fuel to the fire

Which type of rescue has limited means of entry and exit, is not designed for continuous occupancy, and may include cisterns/wells and utility vaults?

Confined-space rescue

Which action would be taken first when performing suppression operations at a structure protected by automatic sprinklers? (685) [4.3.14] Closing the main sprinkler control valve Advancing attack hose to the fire floor Testing the sprinkler system Connecting the pumper to the FDC

Connecting the pumper to the FDC

What should you do if you find a problem when maintaining a portable generator? Select one: a. Report the problem, but keep the generator in service b. Send it back to the manufacturer c. Attempt to repair it d. Consult the manual to determine the proper action

Consult the manual to determine the proper action

Why is gross decontamination after overhaul important? (746) [4.3.13] Contaminated PPE can lead to carcinogens being absorbed through the skin. Dirty PPE makes firefighters appear unprofessional to the public Failure to perform decontamination may void PPE warranties. Contaminants on PPE can alter the fit of the garments.

Contaminated PPE can lead to carcinogens being absorbed through the skin.

How do a building's contents affect fire growth and structural collapse? Select one: a.Contents can retain water and increase the stress on structural members. b.Contents help distribute the weight in the building evenly, which adds structural stability. c.Contents burn more slowly than structural members, so it takes longer for the fire to grow. d.Contents create barriers that help block fire spread.

Contents can retain water and increase the stress on structural members.

What is often the most readily available fuel source and significantly influences fire development in a compartment fire? (167) [4.3.11] Contents within the structure Window, wall, and floor coverings Exterior wall coverings Combustible roof materials

Contents within the structure

Which action may improve visibility inside structures so that interior crews can work more effectively? (494) [4.3.11, 4.3.12] Cooling the exterior of the building Exposure protection Controlling exhaust openings Increasing the number of personnel

Controlling exhaust openings

When performing tactical ventilation, what action has the most impact on successful ventilation? (494) [4.3.11, 4.3.12] Removing fuel sources Exposure protection Activating sprinkler systems Controlling oxygen availability

Controlling oxygen availability

Which heat transfer mechanism is dependent on several factors including the turbulence and velocity of moving gases? (132) [4.3.11, 4.3.12] Convection Conduction Reflection Radiation

Convection

Which is an indicator that a fire hose should be removed from service? Select one: a. Dirt on the hose jacket b. Air is present in the hoseline c. The hose twists when pressurized d. Couplings are loosening from the hose

Couplings are loosening from the hose

Which type of carry or drag is commonly used for children, but is not practical for unconscious adults? (466) [4.3.9] Cradle-in-arms lift/carry Extremities lift/carry Incline drag Webbing drag

Cradle-in-arms lift/carry

What is the purpose of a trench cut? (520) [4.3.12] Make conditions on upper floors tenable for firefighters Create a defensible line ahead of the fire's spread Determine construction features of the roof Indicate conditions below the roof

Create a defensible line ahead of the fire's spread

What is the priority when dealing with a Class C energized utility fire?

Creating a perimeter and contacting the proper utility authority

Which use of a hose stream would protect firefighters and property from heat caused by the fire? (613) [4.3.10] Creating a water curtain Performing hydraulic ventilation Dispersing smoke and gases from the fire compartment Removing fuel from the fire compartment

Creating a water curtain

If you enter through a jalousie window, it may be faster and more efficient to:

Cut through the wall around the entire window assembly and remove it

Which would be an example of vertical ventilation? (514) [4.3.12] Cutting a hole in the roof above the fire Opening interior doors and windows Blowers in exterior doors and windows Directing a hoseline out an upper story

Cutting a hole in the roof above the fire

Windows with safety film may require ______ to break the windows

Cutting tools

Which term refers to remove areas or locations inside structures that can cause loss of cellular telephone service or radio signals

Dead zones

In which stage of fire development does structural collapse become likely due to the weakened state of structural members and buildup of water? Select one: a.Incipient b.Fully developed c.Growth d.Decay

Decay

Which type of operational strategy involves keeping personnel outside of the IDLH environment?

Defensive

How can mechanical damage to hoselines be avoided?

Deploy hoselines away from debris

During a preincident survey, firefighters can a. Visitors exploring the station on their own b. Teach students that the firefighter is a friendly helper c. Determine how standard tactics would work in that occupancy d. Use positive statements to tell the audience what to do instead of what not to do

Determine how standard tactics would work in that occupancy

Why is it advantageous for departments to use hose with national standard threaded couplings

Different departments that respond together can connect their hose sections without adapters

Which statement describes the proper cleaning methods for power tools? Select one: a. Power tools require the use of industrial strength solvents to clean them. b. Different power tools require different cleaning agents, so refer to the manufacturer's guidelines for cleaning instructions. c. Power tools must only be cleaned using mild soap and water. d. Since power tools are so durable, they rarely require cleaning.

Different power tools require different cleaning agents, so refer to the manufacturer's guidelines for cleaning instructions.

The straight line travel of radio signals between the transmitting radio and the receiving radio is referred to as ________ communication

Direct

What can happen if excess steam is produced inside the structure as a result of applying water on the fire? (670) [4.3.10] Disruption of the thermal layering Increase in the potential for backdraft or flashover Transition from fuel-limited to ventilation-limited conditions Pyrolysis process speeds up

Disruption of the thermal layering

How are folding doors often used?

Dividers in large meeting rooms

In order to help minimize exposure to risk at a structural fire scene, firefighters should

Do a risk & benefit analysis for every actions

What is a guideline for decontaminating equipment and PPE after a medical response? (1029) [6.2.1] Contaminated equipment can be washed at the same time as other PPE. Do not decontaminate equipment or PPE in the station kitchen or bathroom. Contaminated PPE must be sent to an outside company for specialized cleaning. Decontaminate all equipment using a solution of equal parts hydrogen peroxide and water.

Do not decontaminate equipment or PPE in the station kitchen or bathroom.

Which is a radio communications best practice?

Do not transmit until the frequency is clear

Which type of locking device that is often found in hotel rooms restricts the opening of a door using a U-shaped shackle that connects with a shaft and knob mounted on the doorframe?

Door limiter

Which type of window has two sashes that can move past each other in a vertical plane and is commonly used in residential occupancies?

Double-hung window

Which kind of door would be forced by inserting a rotary saw blade through the opening and cutting the security bar?

Double-swinging door with a drop bar

When outside a structure, a pike pole should be carried with the tool head:

Down and positioned ahead of the body

What are chutes designed to do? (753) [4.3.14] Drain water runoff out a window or door Cover doors and windows after openings have been made Carry salvage tools from the apparatus to the structure Act as a basin for storing water runoff

Drain water runoff out a window or door

A _____ is a wedge-shaped tool that widens to break the shackle of a padlock

Duck-billed lock breaker

When should firefighters begin considering the potential that a building will collapse? Select one: a.Once the fire reaches the fully involved stage b.Immediately upon arrival at the incident c.Once the fire reaches the growth stage d.During preincident surveys and size-up

During preincident surveys and size-up

Which power source can be provided by rechargeable batteries or portable or vehicle-mounted generators?

Electric

What vehicles have danger associated with the high voltage stored within the batteries and running through wiring connected to the vehicle's motor?

Electric and hybrid vehicles

Which safety hazard are firefighters most likely to find in the space between the ceiling and the roof?

Electrical wiring

Which type of alarm consists of scrolling message boards and pagers

Electronic

Which type of specialized fire company generally has the primary duty of transporting patients to a hospital

Emergency medical company

One goal of the National Fallen Firefighters Association 16 Firefighter Life Safety Initiatives is to:

Empower all firefighters to stop unsafe practices

Which location would be ideal for testing fire hose? Select one: a. At incidents where hose is in use b. Public park c. Occupied parking lot d. Empty parking lot next to the fire station

Empty parking lot next to the fire station

What construction features tend to contain fires for a longer period of time, thus creating fuel-rich, ventilation-limited environments? (172) [4.3.10, 4.3.11] Energy-efficient designs High ceilings and atriums Heat-reflective wall treatments Tile, stone, and concrete flooring

Energy-efficient designs

Which type of specialized fire company is assigned to pumping apparatus and performs suppression duties at a structure fire

Engine company

During a fire station tour for children

Ensure that the children are only allowed to handle clean PPE

During a fire station tour for children a. They provide a goal or purpose for the lesson b. Teach students that the firefighter is a friendly helper c. Ensure that the children are only allowed to handle clean PPE d. Use positive statements to tell the audience what to do instead of what not to do

Ensure that the children are only allowed to handle clean PPE

To prevent injuries while using forcible entry tools, always:

Ensure that you have room to operate the tool properly

Emergency calls to a telecommunications center must be handled quickly in order to

Ensure the safety of the community

Why must locating and isolating the fire be a priority before any search? (454) [4.3.9] Entering to search provides a ventilation opening to the structure, which could cause fire to spread. Smoke from the fire makes performing searches more difficult. Primary search cannot be performed until after the fire has been controlled. Property protection is a higher incident priority than life safety.

Entering to search provides a ventilation opening to the structure, which could cause fire to spread.

What is the best option when rapid fire development is about to occur? (470) [4.2.4, 4.3.5] Advance to the seat of the fire to extinguish it before it grows Shelter in place Escape to a safe haven Remain in place and use the hoseline for protection

Escape to a safe haven

What is a rescuer's role in occupant self-evacuation? (465) [4.3.9] Treating injured victims Keeping bystanders out of the safe haven area Establishing a safe haven away from the structure Moving victims to a protected location inside the structure

Establishing a safe haven away from the structure

Why is ventilation used during overhaul and loss control? (493) [4.3.11, 4.3.12] To help control the fire Remove soot and odors from valuable contents Evacuate smoke from structures after a fire has been extinguished Eliminate the need for respiratory protection

Evacuate smoke from structures after a fire has been extinguished

Which statement describes the protection of evidence at a fire scene? (763) [4.3.8, 4.3.14] Charred documents should be removed from containers where they are found and bagged as evidence. The only type of evidence that firefighters must keep in place are items that indicate signs of arson. Evidence must not be disturbed unless absolutely necessary for extinguishment of the fire.

Evidence must not be disturbed unless absolutely necessary for extinguishment of the fire.

After locating a downed firefighter in an IDLH atmosphere, what is the RIC's priority? (474) [4.3.9] Extinguishing the fire Rescuing other victims Exiting the IDLH atmosphere Stabilizing the firefighter's injuries

Exiting the IDLH atmosphere

Corrosion can occur to fire hose couplings when:

Exposure to a substance weakens the metal over time

What is the cause of most fire deaths? (124) [4.3.10, 4.3.11] Exposure to toxic gases found in smoke and/or lack of oxygen Exposure to extreme heat and/or contact with flames and hot surfaces Injuries caused by falling materials or structural collapse Accidental injuries sustained during escape and/or evacuation procedures

Exposure to toxic gases found in smoke and/or lack of oxygen

Which rescue tool is typically used when objects must be pushed farther than the maximum opening distance of hydraulic spreaders?

Extension rams

Which action will transition a compartment fire in a modern structure from ventilation-limited to fuel-limited? (158) [4.3.11] Extinguishing some of the fuel Cooling the exterior of the compartment Altering the flow paths within the structure Making additional openings in the compartment

Extinguishing some of the fuel

Which is an item the crew member assessing the immediate area around the vehicles would identify?

Extrication tasks that may be required

What federal agency regulates all radio communication in the US?

Federal Communications Commission (FCC)

Which type of respiratory protection is normally used in wildland firefighting

Filter mask

What is the term for a long, narrow extension of fire projecting out from the main body of a wildland fire

Finger

Which item would likely be found in the fire command center in a large building a. Nonworking smoke detectors b. Fire hydrants c. Fire alarm control panel d. Initiating device

Fire alarm control panel

Which member of the fire prevention division is tasked with determining the origin and cause of a fire

Fire and arson investigator

On a preincident survey sketch or map, the locations of all _______ should be marked

Fire hydrants

On a preincident survey sketch or map, the locations of all _______ should be marked a. Visitors exploring the station on their own b. Fire hydrants c. Determine how standard tactics would work in that occupancy d. Use positive statements to tell the audience what to do instead of what not to do

Fire hydrants

When would a single firefighter be assigned to operate an attack hoseline? (625) [4.3.8] Standpipe operations Basement fire Fire in a trash pile Attic fire

Fire in a trash pile

Which is a characteristic of fires in residential basements? (682) [4.3.10] The safest path into a basement fire is through an interior enclosed stairwell. Residential basement fires tend to be fuel-limited rather than ventilation-limited. FireFighters working on the floor above the basement fire are at an increased risk of floor collapse. Sounding the floor is the best way to determine whether it is safe to work on the floor above a basement fire.

FireFighters working on the floor above the basement fire are at an increased risk of floor collapse.

What will establish new flow paths between the fire compartment and exterior vents of the building? (162) [4.3.11] Firefighters advancing a hoseline through an open door or ventilating windows to make entry into a building Firefighters applying water from the exterior through an existing opening in the structure Rapid fire development from the growth stage into the fully developed stage Fire gases pushing into compartments adjacent to the burning compartment

Firefighters advancing a hoseline through an open door or ventilating windows to make entry into a building

Which statement describes a safety guideline for operations at a multistory building? (681) [4.3.10] Firefighters must not use an elevator to get to the fire floor. Firefighters must not connect the hose to the standpipe on the fire floor. If the structure does not have a standpipe, firefighters must avoid using the stairwell nearest to the fire. If the standpipe is in a protected stairwell, the hose must be connected on the floor above the fire.

Firefighters must not use an elevator to get to the fire floor.

Which is a disadvantage of hydraulic ventilation? (513) [4.3.11] Can only be used on fires still in the incipient stage Firefighters operating nozzle must remain in heated, hazardous atmosphere throughout operation Requires specialized equipment Must be used in combination with another type of ventilation

Firefighters operating nozzle must remain in heated, hazardous atmosphere throughout operation

How does topography (the earth's surface features) affect the spread of ground cover fires? (711) [4.3.19] Fires on southern exposures receive more heat from the sun and burn faster than other fires. Fires spread faster going downhill than they do going uphill. Fires in canyons tend to spread slower because of a lack of wind and air flow. Fires on flat terrain are prone to the chimney effect.

Fires on southern exposures receive more heat from the sun and burn faster than other fires.

Which type of emergency lights are mounted on a vehicle and are usually deployed by raising, lowering, and rotating the telescoping poles to which they are affixed

Fixed lights

Which device detects light in the ultraviolet and infrared spectrum in order to alert occupants to fires

Flame detectors

What occurs when fresh air (oxygen) from ventilation is introduced into a room, causing gases to reignite and rapid fire development to occur? (495) [4.3.11, 4.3.12] Burst Flashover Decay Vaporization

Flashover

Which type of phenomenon occurs when the fire rapidly transitions from the growth stage to the fully developed stage? (153) [4.3.11] Flashover Entrainment Flame propagation Spontaneous ignition

Flashover

Which type of sprinkler deflector is mounted so that the threaded shank would not be visible below the ceiling

Flush

Which type of sprinkler deflector is mounted so that the threaded shank would not be visible below the ceiling a. Chemical Pellet b. Flame detectors c. Riser d. Flush

Flush

Which basic firefighting skill serves as an essential survival skill during search and rescue operations? (434) [4.3.5, 4.3.9] Using air monitoring devices to sample the atmosphere Forcing a window or cutting through debris Operating a portable fire extinguisher to put out an incipient fire Using a hoseline to perform hydraulic ventilation

Forcing a window or cutting through debris

Which hose lay allows the pumper to remain at the incident scene so that hose, equipment, and tools are readily available if needed? (601-603) [4.3.15] Standard lay Forward lay Combination lay Reverse lay

Forward lay

Which window component consists of the members that form the perimeter of the window?

Frame

All recorded transmissions become part of the official record on an incident and may be made public under open records laws or_______ requests

Freedom of Information Act ( FOIA)

Which means of influencing fire dynamics is typically a tactic in wildland fires or liquid and gas fires? (165) [4.3.11] Fuel removal Oxygen exclusion Temperature reduction Chemical flame inhibition

Fuel removal

In which situation would a dry chemical extinguisher be MOST effective? (262) [4.3.16] Fuel spill fire at a vehicle accident Titanium fire Magnesium fire Fire in a deep fryer at a restaurant

Fuel spill fire at a vehicle accident

Exposure to _____ will react to rapidly separate the inner lining of the hose

Gasoline

Which material is a Class B fuel? (256) [4.3.16] Gasoline Lithium Vegetable oil Live electrical wires

Gasoline

What are the most common conventional fuels?

Gasoline and diesel

What is the most common power source used by emergency personnel to power scene lighting and portable rescue equipment

Generators

Which safety measure should be in place during overhaul? (741) [4.3.10, 4.3.13] Gloves to protect from cuts and thermal burns Hearing protection to prevent hearing loss Law enforcement personnel providing security protection A hazardous materials response team standing by

Gloves to protect from cuts and thermal burns

What is one construction requirement of newer factory built homes that has helped to reduce fire loss and residential fatalities?

Gypsum board instead of wood paneling as an interior finish

Which type of building material is used to protect other materials because its moisture content gives it excellent heat resistance? Select one: a.Gypsum wallboard b.Reinforced concrete c.Reinforced steel d.Lath and plaster Feedback

Gypsum wallboard

Even though ______ is less likely to spread to responders than other common diseases, it is still important to use body substance isolation procedures with an infected person. (1025) [6.2.1] Hepatitis D MRSA HIV Hepatitis C

HIV

Roof-mounted equipment such as _____ add a substantial load to the roof and increase the probability of collapse.

HVAC units

Which is an indication of possible roof collapse? (503) [4.3.12] Fire appearing to travel downward Smoke from upper windows Popping or crackling sounds HVAC units sagging or leaning

HVAC units sagging or leaning

Which tool or piece of equipment is a member of a fire attack team likely to carry? (674) [4.3.10] Salvage cover ppv fan Power saw Hand light

Hand light

Which is a component of body substance isolation (BSI) procedures? (1026) [6.2.1] CPR training Hand washing Using medication to treat illnesses Triage

Hand washing

Which tool would be helpful when performing forcible entry in an area with limited space?

Handsaw

A male hose coupling:

Has the thread on the exterior

When using a rotary saw to cut metal, firefighters should:

Have a charged hoseline nearby

When breaching an exterior metal wall with a rotary saw, firefighters should:

Have a charged hoseline or fire extinguisher available

In order to minimize danger when riding in apparatus firefighters should always wear

Hearing protection

Which measurement is often used to measure how long PPE will protect a firefighter in an interior fire environment? (127-128) [4.3.11] Heat flux to the PPE Rate of rise in temperature Pressure of convective flow Temperature in the structure

Heat flux to the PPE

How does a compartment fire affect pressure in and around gases in the compartment? (127) [4.3.11] Heat from a fire increases the pressure of the surrounding gases. Gases move from areas of lower pressure to areas of higher pressure. At standard temperature and atmospheric pressure, gases circulate at a steady, uniform rate. Significant differences in pressure, typically 10 kPa or greater, are required to cause movement of gases in a compartment.

Heat from a fire increases the pressure of the surrounding gases.

What occurs when a gas is compressed? (130) [4.3.10, 4.3.11] Heat is generated Heat is absorbed Gas becomes more buoyant Gas becomes less conductive

Heat is generated

Why should the bumper of a burning car be avoided? (695) [4.3.7] It is the location with the highest concentration of toxic gases. It is the location of the vehicle that is most likely to reignite after extinguishment. Heated bumper struts may explode and injure those nearby. Items inside the bumper are prone to spontaneous ignition.

Heated bumper struts may explode and injure those nearby.

Which statement describes how glass will react under fire conditions? Select one: a.Glass generally is not affected by fire conditions, but may be broken during forcible entry. b.It will break or melt, causing the surrounding walls to weaken. c.Heated glass may crack when water is applied. d.Glass can add a significant amount of fuel to the fire.

Heated glass may crack when water is applied.

How does the size of a wooden structural member affect how it reacts to fire? Select one: a.Engineered wood products burn slower than natural wood because they have a lower moisture content. b.Heavy timbers lose structural stability quickly when exposed to direct flame. c.Heavy timbers remain strong even after exposure to direct flame. d.Size has no effect on how easily a piece of wood will ignite.

Heavy timbers remain strong even after exposure to direct flame.

What is a specific example of a way that firefighters can educate the occupant during a residential fire and life safety survey

Help develop an emergency exit plan

What is a specific example of a way that firefighters can educate the occupant during a residential fire and life safety survey a. Help develop an emergency exit plan b.Help the occupant understand how to improve safety conditions c. May be needed as evidence if there is a fire in the home d. To determine what hazards and what types of safety equipment are within the home

Help develop an emergency exit plan

Fire and life safety programs are important because they

Help maintain positive relations with the public

Fire and life safety programs are important because they a. activate their PASS devices. b. About the people who live and work in their community c. How to prepare for fire or severe weather d. Help maintain positive relations with the public

Help maintain positive relations with the public

When firefighters enter a home to do residential fire and life safety survey, one of the main objectives should be to

Help the occupant understand how to improve safety conditions

When firefighters enter a home to do residential fire and life safety survey, one of the main objectives should be to a. Nonworking smoke detectors b.Help the occupant understand how to improve safety conditions c. May be needed as evidence if there is a fire in the home d. To determine what hazards and what types of safety equipment are within the home

Help the occupant understand how to improve safety conditions

When advancing hoseline into a building, why is it important to keep doors closed until you are ready to enter the structure? (608) [4.3.10] Enables the IC to quickly identify points of entry Helps prevent changes to the flow path Requires fewer firefighters Saves time

Helps prevent changes to the flow path

Which characteristic of Type IV construction buildings can contribute to the intensity of a fire once it starts?

High concentration of wood

Which is a sign that an accelerant may have been used to start the fire? (762) [4.3.8, 4.3.13] High heat intensity Lack of fire patterns on the floor Fire that reaches the decay stage quickly Lack of personal possessions in the structure

High heat intensity

Which is a characteristic of water as an extinguishing agent? (614) [4.3.10] Higher heat-absorbing capacity than most other common extinguishing agents Extinguishes fire by smothering the fuel Lower heat-absorbing capacity than most other common extinguishing agents Extinguishes fire by removing the fuel

Higher heat-absorbing capacity than most other common

What is the likely result if additional air is allowed into an already ventilated compartment fire? (158) [4.3.11] Higher peak heat release rate Lower neutral plane Reduced vapor pressure at the seat of the fire Higher ratio of complete to incomplete combustion

Higher peak heat release rate

What is an example of an unsafe behavior that should be documented during a private dwelling fire safety survey

Hoarding

What is an example of an unsafe behavior that should be documented during a private dwelling fire safety survey a. Hoarding b. About the people who live and work in their community c. Stacks of papers or clothing near a heater d. To determine what hazards and what types of safety equipment are within the home

Hoarding

What method is commonly used to construct metal doors?

Hollow core with a steel or aluminum covering

What is needed for vertical ventilation to be effective? (514) [4.3.12] Horizontal inlet opening at or below fire level Horizontal inlet opening above fire level Large exhaust-to-intake ratio Multiple horizontal inlet openings

Horizontal inlet opening at or below fire level

Which piece of equipment is designed to prevent damage to hose when vehicles must drive over it? (599) [4.3.15] Hose strap Hose bridge Hose roller Chafing block

Hose bridge

Which piece of equipment provides a more secure means to handle charged hoselines when applying water? (600) [4.3.8] Hose strap Chafing block Hose roller Hose ramp

Hose strap

Which piece of equipment is used to prevent pressurized hose from dangerously whipping back and forth if it ruptures? Select one: a. Apparatus-mounted proportioner b. Nozzle equipped with a shutoff valve c. Hose test gate valve d. Hose clamp

Hose test gate valve

Which air movement equipment is used for hydraulic ventilation? (505) [4.3.11, 4.3.12] Air movement devices Hoselines and nozzles Stacking and hanging devices Flexible ducts

Hoselines and nozzles

In which location would sheltering-in-place likely be used instead of evacuation? (466) [4.3.9] Low-rise apartment building Daycare center Hospital Open-air market

Hospital

Which scene control zone directly surrounds the incident site and should only be entered by personnel directly involved in disposing of the problem

Hot zone

What factor affects the decision of where to force entry?

How forcible entry will affect ventilation

Which topic would be the potential focus of a fire and life safety program put on by the fire department

How to prepare for fire or severe weather

Which rescue tool is designed for heavy lifting and can be used for stabilization in conjunction with cribbing?

Hydraulic jack

Which rescue tool can be placed in a door frame to spread the frame far enough apart so that the door can swing open?

Hydraulic ram

Which type of ventilation may be used in situations where other types of forced ventilation are unavailable? (513) [4.3.11] Mechanical ventilation Hydraulic ventilation Secondary ventilation Primary ventilation

Hydraulic ventilation

Which type of alternative vehicle fuel is colorless, odorless, and has an invisible flame during the day? (704) [4.3.7] Hydrogen LNG CNG Biodiesel

Hydrogen

A Class ____ standpipe system is primarily designed to be used by fire suppression personnel who are trained in handling large hoselines

I

A Class ____ standpipe system is primarily designed to be used by fire suppression personnel who are trained in handling large hoselines a. II b. IV c. I d. V

I

Type _____ construction can be expected to remain structurally stable longer than other types during a fire.

I

Which is an accurate statement about using an air-monitoring device? (441) [4.3.21] If devices are used incorrectly, the safety of everyone around can be in jeopardy. Air-monitoring devices must be used under the supervision of a company officer. Air-monitoring devices can only measure one type of gas, so multiple varieties are needed at each incident. Only one type of air-monitoring device should be used at an incident.

If devices are used incorrectly, the safety of everyone around can be in jeopardy.

Which statement BEST describes a fire in a large compartment or a compartment with a high ceiling? (173) [4.3.10, 4.3.11] In structures with high ceilings, a large volume of hot smoke and fire gases can accumulate at the ceiling level, while conditions at floor level remain relatively unchanged. Open plan commercial structures have limited fuel loads and numerous physical barriers to prevent the spread of fire and smoke in the space. Lack of ventilation becomes the limiting factor more quickly in a large compartment than it would in a smaller compartment. The fire will normally develop more rapidly than one in a small compartment.

In structures with high ceilings, a large volume of hot smoke and fire gases can accumulate at the ceiling level, while conditions at floor level remain relatively unchanged.

Residential fire and life safety surveys should be conducted a. Help develop an emergency exit plan b.In teams of two or more firefighters c. May be needed as evidence if there is a fire in the home d. To determine what hazards and what types of safety equipment are within the home

In teams of two or more firefighters

NFPA 1500 requires that emergency operations be managed through an

Incident Management System

What is the goal of positive-pressure ventilation? (511) [4.3.11, 4.3.12] Increase pressure to higher than the exterior of the structure, not higher than the fire can produce Decrease pressure to lower than the exterior of the structure Increase pressure to higher than the exterior of the structure and also higher than the fire can produce Maintain the same interior and exterior pressure

Increase pressure to higher than the exterior of the structure, not higher than the fire can produce

Manufactured products affect firefighters' exposure to contaminants, because they tend to burn at higher temperatures and these higher temperatures

Increase the skin's ability to absorb chemicals deposited on it

How can roof security features such as wired glass impact fire fighting operations?

Increase the time required to create ventilation openings

Exposure to chemicals and products of combustion are linked to

Increased occurrences of illnesses and diseases

How does the self-sustained chemical reaction influence the oxidation reaction in flaming combustion? (144) [4.3.11] Increases the speed of the oxidation reaction Decreases the types of products of combustion released Decreases the temperature required for the oxidation reaction Increases the ratio of complete to incomplete combustion of fuel

Increases the speed of the oxidation reaction

Which condition will generally result in lower relative humidity

Increasing temperature

If a wildland or ground cover fire is too dangerous for a direct attack, which type of fire attack should be used

Indirect

How is tuberculosis (TB) usually spread? (1024) [6.2.1] Ingestion of infected food Blood transfusion Infected person sneezing or coughing Sexual contact

Infected person sneezing or coughing

What provides the best indicators of structural integrity? (167) [4.3.11] Information gathered at the scene Occupant interview during the preincident survey Year and method of construction Occupancy classification

Information gathered at the scene

Which component of a fire alarm system senses products of combustion and sends a message to the control panel

Initiating device

Which component of a fire alarm system senses products of combustion and sends a message to the control panel a. Nonworking smoke detectors b. Fire hydrants c. Determine how standard tactics would work in that occupancy d. Initiating device

Initiating device

What should be the next step after choosing the appropriate fire extinguisher for a fire? (267) [4.3.16] Inspect the extinguisher to make sure it is charged and operable. Pull the pin to break the seal. Refill the extinguisher so it is ready to operate. Pick up the extinguisher and carry it toward the fire.

Inspect the extinguisher to make sure it is charged and operable.

Before fire hose and couplings are stored or placed back into service, they should be:

Inspected for damage to the hose jacket and threads

Which member of a fire department's training division is in charge of providing training for entry level personnel and staff members

Instructor

What are attached to hard-suction hose during drafting operations in order to prevent debris from entering the pump? (595) [4.3.15] Gate valves Drafting valve Siamese appliance Intake strainers

Intake strainers

What is one of the three categories of wildland fire causes

Intentional

To provide better performance than other radios base stations have receivers that are

Interference-resistant

How does chemical flame inhibition work to extinguish fire? (258) [4.3.16] Interrupts the chemical chain reaction in the burning process Reduces burning material's temperature Excludes oxygen from the burning process Forms oxygen-excluding soapy foam surface on burning material

Interrupts the chemical chain reaction in the burning process

All auxiliary equipment must be

Intrinsically safe

Communications equipment that is to be used in flammable atmospheres must be

Intrinsically safe

Which action would directly promote the National Fallen Firefighters Association 16 Firefighter Life Safety Initiatives?

Investigating line of duty deaths and near misses in order to revise departmental safety standards

Which type of smoke detector detects particles and aerosols produced that are too small to be seen by the naked eye

Ionization smoke detectors

Which type of smoke detector detects particles and aerosols produced that are too small to be seen by the naked eye a. Manual pull station b. Fire hydrants c. Fire alarm control panel d. Ionization smoke detectors

Ionization smoke detectors

Plaster or gypsum wall covering on interior walls:

Is designed to provide fire resistance and limit fire spread within the structure

The water supply for sprinkler systems a. Chemical Pellet b. Is often designed to supply only a portion of the sprinklers c. Post indicator Valve (PIV) d. Flush

Is often designed to supply only a portion of the sprinklers

What is the term for an area of unburned land surrounded by burned land

Island

What challenge may firefighters face when performing salvage in a commercial occupancy? (753) [4.3.14] The rooms are likely to be small and hard to maneuver. Valuable merchandise may be damaged by covering it. Property owners are often on site and can be a distraction It can be difficult to cover large displays and stocks.

It can be difficult to cover large displays and stocks.

Why should test lengths of hose not exceed 300 feet (100 m) in length? Select one: a. Longer lengths are susceptible to damage during testing. b. Longer lengths are too difficult to carry and put in place. c. Gauges won't deliver proper results with longer lengths of hose. d. It is difficult to purge air from longer lengths of hose.

It is difficult to purge air from longer lengths of hose.

If the lock of a metal-frame double-hung window does not force with minimum pressure applied:

It may be quicker to break the glass and open the lock manually

How does reinforced concrete react to exposure to fire? Select one: a.It elongates and pushes building walls outward. b.It performs well, but can lose strength through spalling. c.It contracts and forces building walls inward. d.It takes longer to fail after exposure to fire.

It performs well, but can lose strength through spalling.

Why is breaching interior walls not a preferred method of escape? (472) [4.2.4, 4.3.5, 4.3.9] It could cause possible harm to victims sheltering in the next room. It requires strength, depletes air supply, and creates an additional flow path. It requires specialized tools and requires responders to remove SCBA. It inflicts too much damage on the structure.

It requires strength, depletes air supply, and creates an additional flow path.

Which tool would be practical to use to make an opening that is large enough for a firefighter to pass through in a brick or concrete block wall?

Jack-hammer

What is one of the 10 standard wildland firefighting orders

Keep informed on weather conditions and forecasts

When presenting to young children, it is ideal to

Keep the presentation short and interesting

When presenting to young children, it is ideal to a. They provide a goal or purpose for the lesson b. Keep the presentation short and interesting c. Provides a road map for a variety of people to teach the lesson and ensure that all topics are covered d. Use positive statements to tell the audience what to do instead of what not to do

Keep the presentation short and interesting

Which inspection hole is made by making a single cut in the roof surface using a rotary saw, chain saw, or axe? (518) [4.3.12] Angle cut Kerf cut Triangle cut Box cut

Kerf cut

Which vehicle component consists of a vertical panel wall in front of the A-post that is enclosed by several structural members?

Kick panels

In which situation would it be appropriate to use direct pressure and elevation to stop the bleeding? (1039) [6.2.1] Broken femur Knife wound to the patient's abdomen Spinal injury Knife wound on the patient's hand

Knife wound on the patient's hand

Which of the following is one of the three principles of air management? (437) [4.3.5, 4.3.9] Turn your SCBA off once you have found an area of safe haven. Always use short, quick breaths. Always use short, quick breaths. Know your point of no return.

Know your point of no return.

Which condition specific to search and rescue operations should be communicated to crew members and/or your supervisor? (433) [4.3.9] Wind direction and speed Building's construction classification Names of victims or occupants Known locations of victims or occupants

Known locations of victims or occupants

Which piece of equipment is used to quickly drain water from I-DH hose before it is stored? (598) [4.3.15] LDH drainage spout LDH drainage hose roller Hose bridge Chafing block

LDH drainage hose roller

Which type of hose is designed to connect the pumping apparatus to a pressurized water source, such as a hydrant?

Large diameter soft sleeve hose

What is a characteristic of fine fuels

Large surface area relative to volume

What vehicle hazard may require you to isolate the area and request assistance of a hazardous materials team? (697) [4.3.7] A hybrid-electric battery Fire in the engine compartment Large-capacity saddle fuel tanks Downed electrical lines

Large-capacity saddle fuel tanks

Which describes a master stream device? (621) [4.3.10] Large-volume hose streams created by appliances such as apparatus-mounted deck guns Appliance used to increase pressure when drafting from a static water source Appliances attached to the underside of aerial platforms which allow multiple hoses to be operated from the platform at one time Small red hoselines carried on some apparatus that are used for car fires or small trash fires

Large-volume hose streams created by appliances such as apparatus-mounted deck guns

What can firefighters do to help absorb nozzle reaction when operating a large hoseline? (627) [4.3.10] Rest the hoseline on the ground Stand with both feet together Utilize a hose roller or hose bridge Lean slightly forward

Lean slightly forward

A ________ outlines the material to be taught and teaching procedures to be used

Lesson plan

A ________ outlines the material to be taught and teaching procedures to be used a. They provide a goal or purpose for the lesson b. The presenter knows the topic well and anticipates audience questions c. Lesson plan d. offer constructive solutions for correcting or eliminating hazards

Lesson plan

What has an even higher priority in high-rise buildings because they often have more occupants than other structures? (525) [4.3.11, 4.3.12] Property conservation Incident stabilization Environmental concerns Life safety

Life safety

Sliding doors can be forced by:

Lifting the sliding panel up and out of its track

What is dry lightning

Lightning without rain

Which structural element may contribute to roof failure during a fire? (502) [4.3.12] Lightweight roof trusses Attic space beneath the roof Collar or rafter roof ties Metal roofing materials

Lightweight roof trusses

What should a firefighter do if a community member raises a question or complaint during a fire and life safety program

Listen actively, resolve the issue if possible, or refer them to someone who can help them if you cannot

What should a firefighter do if a community member raises a question or complaint during a fire and life safety program a. Listen actively, resolve the issue if possible, or refer them to someone who can help them if you cannot b. About the people who live and work in their community c. How to prepare for fire or severe weather d. Help maintain positive relations with the public

Listen actively, resolve the issue if possible, or refer them to someone who can help them if you cannot

Where can a firefighter go to find information about the codes required in postincident reports

Local SOPs and the NFIRS system

Which is a condition specific to tactical ventilation that should be communicated to crew members and/or a supervisor? (500) [4.3.11, 4.3.12] Locations of alternate water supply Locations of overhead power lines Locations of nearby apparatus parking Locations of building power supply

Locations of overhead power lines

Padlocks and surface bolts are examples of:

Locking devices

Before performing forcible entry at a commercial or industrial occupancy, a firefighter should "try before you pry" and:

Look for a lock box near the main entrance

What is the next step after determining whether or not a patient's airway is clear? (1031) [6.2.1] Move the patient to a safe location Call ahead to the hospital Look for signs of breathing Begin chest compressions

Look for signs of breathing

What happens when the nozzle is above the elevation of the fire pump, such as when operating on the second story of a building? (628) [4.3.7, 4.3.8, 4.3.10] Loss of water pressure Increase in water pressure Increase in chance of water hammer occurring Decrease in chance of water hammer occurring

Loss of water pressure

Which statement about the dangers of products of combustion is accurate? (124) [4.3.11] Low oxygen concentrations alone can result in hypoxia or death. Visible smoke presents the greatest inhalation danger. Toxic products of combustion are released only during the combustion reaction. The toxic effects of smoke inhalation are the result of the interaction between carbon monoxide and heat.

Low oxygen concentrations alone can result in hypoxia or death.

Which type of water or ice rescue is extremely dangerous because of powerful undercurrents and a hydraulic action that make escape virtually impossible?

Low-head or low-water dams

What is caused by friction loss? (627-628) [4.3.7, 4.3.8, 4.3.10] Decreased nozzle reaction Lower water pressure at the pump Increased nozzle reaction Lower water pressure at the nozzle

Lower water pressure at the nozzle

For which type of rescue are rescuers likely to require outside expertise such as plant personnel or equipment manufacturers?

Machinery rescue

______ is an example of a Class D fuel. (256) [4.3.16] Magnesium Animal fat Gasoline Alcohol

Magnesium

What is the best way for a Fire Fighter I to prevent work-related injuries?

Maintain a high level of personal physical fitness

Which coupling on a hoseline will indicate you are headed toward an egress point? (471) [4.2.4, 4.3.5] Male Female Joint Bypass

Male

When hose is rolled in a single section straight roll, the:

Male coupling is in the center of the roll

Which component of a fire alarm system allows occupants to activate the fire alarm

Manual pull station

Which component of a fire alarm system allows occupants to activate the fire alarm a. Manual pull station b. Fire hydrants c. Fire alarm control panel d. Initiating device

Manual pull station

In order to make the process of loading large diameter hose (LDH) more efficient;

Many apparatus are equipped with an LDH hose roller

Why is removing windshields no longer standard practice during extrication?

Many automobiles use the windshield as a structural component.

Private home fire safety surveys must be well documented because they

May be needed as evidence if there is a fire in the home

Private home fire safety surveys must be well documented because they a. Nonworking smoke detectors b. About the people who live and work in their community c. May be needed as evidence if there is a fire in the home d. To determine what hazards and what types of safety equipment are within the home

May be needed as evidence if there is a fire in the home

Which tool is a combination of hoe and rake

McLeod

Which type of ventilation is the most effective for clearing contaminated structures of smoke? (508) [4.3.11, 4.3.12] Hydraulic ventilation Secondary ventilation Natural horizontal ventilation Secondary ventilation Mechanical ventilation

Mechanical ventilation

Which organization or agency assists the fire department by alerting the public of traffic incidents or evacuations

Media

What material is commonly used to construct fire doors?

Metal

Which is a reason for ventilation during overhaul? (499) [4.3.11, 4.3.12] Prevent flashover or reignition Minimize property damage to the greatest extent possible Help preserve evidence Minimize the number of personnel needed for overhaul

Minimize property damage to the greatest extent possible

Why should the flow of water be stopped from activated sprinklers once the fire has been extinguished? (687) [4.313, 4.3.14] Prevent the sprinkler system from overloading Prevent reignition of the fire Reduce the wear and tear on the sprinkler system Minimize water damage to the structure and its contents

Minimize water damage to the structure and its contents

A ________ can be carried completely on the shoulder and clear of the ground, which makes it less likely that the hose will catch on obstacles

Minuteman load

How can HVAC systems affect tactical ventilation? Select one: a.Help extinguish the fire by changing the pressure in the structure b.Provide fresh air to ventilation crews c.Cool the air in the fire room to weaken the fire's intensity d.Move products of combustion to unaffected areas Feedback

Move products of combustion to unaffected areas

What should you do at an electrical utility emergency if you find yourself inside the gradient field or feel a tingling in your legs?

Move your feet close together and hop or shuffle out of the danger area

How should a portable water tank for a mobile water supply operation be set up? (596-597) [4.3.15] Gated wyes must be attached to the supply hose Must allow easy access from multiple directions, but not block other apparatus from the fire scene Intake strainers must be attached to the supply hose Must be set up downhill and downwind from the fire scene

Must allow easy access from multiple directions, but not block other apparatus from the fire scene

Woven-jacket fire hose:

Must be brushed clear of dust and dirt after each use

Hose that is stored in the fire apparatus bay:

Must be inspected and cleaned more frequently due to exposure to oil, gasoline, and airborne contaminants

On Which National Fire Protection Association (NFPA) standard are the professional qualifications for Fire Fighter I based?

NFPA 1001

What is one of the three categories of wildland fire cause

Natural

Which type of ventilation requires no additional personnel or equipment to set up and maintain? (506) [4.3.11] Mechanical ventilation Secondary ventilation Natural horizontal ventilation Hydraulic ventilation

Natural horizontal ventilation

Static and broken messages are an indication that a radio receiver is

Near the limit of the transmission range

Calls received at fire department facilities that range from requests for assistance to personal calls from family or friends are known as _______ calls

Nonemergency

What condition should be pointed out to occupants during a fire safety survey

Nonworking smoke detectors

What condition should be pointed out to occupants during a fire safety survey a. Nonworking smoke detectors b. About the people who live and work in their community c. Stacks of papers or clothing near a heater d. To determine what hazards and what types of safety equipment are within the home

Nonworking smoke detectors

Which statement describes the staffing and funding of volunteer fire departments

Not continuously staffed and may rely on fundraisers for funding

What is an example of situational awareness on the fireground?

Notifying the IC that the fire has spread to another area of the building

What information should be gathered by a dispatcher

Number and location of people involved

Booster hose is designed to be carried:

On reels mounted to the apparatus

When should a collapse zone be established at a structure fire? Select one: a.After mutual aid is requested b.As soon as interior operations begin c.Before cordoning off the hot, warm, and cold zones d.Once a defensive strategy is adopted

Once a defensive strategy is adopted

Which statement about Class C fires is accurate? (256) [4.3.16] Once the electricity has been shut off to a Class C fire, it may be treated as a Class A or Class B fire. Class C fires are rated from I-C through 40-C and can be extinguished using a Class C extinguisher with the same rating. Class C fires contain combustible metals and alloys such as titanium, lithium, or magnesium. Class C fires should be extinguished using a specialized wet chemical system.

Once the electricity has been shut off to a Class C fire, it may be treated as a Class A or Class B fire.

At what point should a firefighter close a sprinkler system's main control valve? (686) [4.3.13, 4.3.14] Upon arrival at the structure Immediately prior to fire attack Once the pumper has been connected to the FDC Once the fire is under control and the IC gives the order

Once the fire is under control and the IC gives the order

How is performing CPR on a small child different than on an adult? (1036) [6.2.1] There is no difference. Rescue breaths should be longer and more frequent. Only one hand should be used for compressions. Chest compressions are delivered more slowly.

Only one hand should be used for compressions.

Which is a safety procedure related to fire hose testing? Select one: a. Only use portable tanks as a water source b. Always test hoses in lengths greater than 300 feet (100 m) c. Always wear full structural PPE d. Only walk near pressurized hose when necessary

Only walk near pressurized hose when necessary

A J-tool is made of rigid, heavy gauge wire and is designed to:

Open a double-swinging door that is equipped with panic hardware

Which situation would call for the use of a pushing or pulling tool such as a drywall hook or a pike pole

Opening a ceiling to check for fire extension

Which would be an example of natural horizontal ventilation? (506) [4.3.11] Cutting a hole in an exterior wall Using water streams Using fans or ejectors Opening doors or windows

Opening doors or windows

Which statement about using a portable fire extinguisher on an incipient stage fire is accurate? (268) [4.316] Operating close to the fire can scatter solid fuel or penetrate the surface of liquid fuel. After the fire diminishes, move farther away to achieve final extinguishment. Liquid fuel fires should only be fought with one portable extinguisher at a time. In order to stop the flow of the extinguishing agent, the pin must be put back in place.

Operating close to the fire can scatter solid fuel or penetrate the surface of liquid fuel.

Which type of building material can produce toxic gases and rapidly deteriorate under fire conditions? Select one: a.Steel b.Lath and plaster c.Glass d.Oriented strand board (OSB)

Oriented strand board (OSB)

In which search method does the leader remain at a fixed point while searching team members spread out through a room to complete a search? (461) [4.3.9] VEIS method Shelter-in-place method Oriented-search method Wide-area search method

Oriented-search method

Which type of electrical heating occurs when the current flowing through a conductor exceeds its design limits? (130) [4.3.11] Overcurrent or overload Friction heating Sparking Arcing

Overcurrent or overload

What may result in poor lighting and possible damage to the lights, generator, or electrical system

Overtaxing a power sources

Which component of the fire triangle is in greatest abundance in a wildland fire

Oxygen

Experience at emergency incidents has shown that, in addition to background noise, _________ can significantly affect the ability to hear and understand radio transmissions

PPE

Unprotected metal surfaces on tools should not be painted because:

Paint hides defects

Which type of collapse occurs when exterior walls collapse simultaneously, causing the roof and upper floors to collapse on top of each other?

Pancake

Which type of door consists of thin pieces of wood, glass, or louvers placed within a framed rectangular area?

Panel door

Which type of factory-built homes are assembled on-site from components constructed of foam insulation sandwiched between sheets of plywood?

Panelized homes

What hazard do solar panels present to firefighters? (690) [4.3.18] Directing water at a solar panel will cause it to release gases that can cause immediate harm. They are prone to spontaneous ignition and will explode without warning. Panels may still generate power after the main power supply is shut off. Directing water at a solar panel will generate a large amount of steam.

Panels may still generate power after the main power supply is shut off.

What type of truss is constructed of wood or metal and is generally used to support flat roofs and floor assemblies?

Parallel chord truss

Which building material can potentially be harmful to firefighters because it contains a glue called urea formaldehyde that gives off a hazardous gas when it is heated? Select one: a.Mineral wool b.Cellulose c.Particle board d.Plywood

Particle board

Which statement about dry chemical extinguishers is accurate? (262) [4.3.16] Particles of the agent may become airborne during application. Dry chemical extinguishers must be used in conjunction with foam. Dry chemical agents are extremely toxic to humans. Dry chemical agents must be applied using a shovel.

Particles of the agent may become airborne during application.

What is the most effective means of establishing awareness of hazards in commercial, industrial, and storage facilities with large fuel loads? (168) [4.3.10, 4.3.11] Performing and updating preincident surveys Accessing code enforcement databases Studying plat maps and building plans Contacting the facilities manager during the incident

Performing and updating preincident surveys

Which type of fire department communication informs the Incident Commander that all members of the crew are present?

Personnel Accountability Report (PAR)

What should take place immediately after the collapse zone is cleared? Select one: a.Personnel return to the staging area b.After-action report c.Personnel accountability report d.Size-up

Personnel accountability report

Which event would signal the need to stop CPR? (1037) [6.2.1] Physician tells you to stop Family member asks you to stop Patient begins to bleed from a wound Patient's skin begins to feel cool and moist

Physician tells you to stop

Which type of nozzle can be driven through stucco, block, wood, or lightweight steel to access fires in concealed spaces? (618) [4.3.10] Smooth bore nozzle Cellar nozzle Piercing nozzle Adjustable pattern fog nozzle

Piercing nozzle

What type of nozzles can be used before ventilation to reduce the risks associated with ventilating a windowless basement? (523) [4.3.12] Adjustable nozzles Fog nozzles Combination nozzles Piercing nozzles

Piercing nozzles

What occurs when a mixture of fuel and oxygen encounter an external heat source with sufficient heat or thermal energy to start the combustion reaction? (120) [4.3.11] Piloted ignition Kinetic ignition Autoignition Sustained ignition

Piloted ignition

What is one of the two primary methods of direct attack on a wildland fire

Pincer

Which roof style commonly has an elevated center along a ridge line and a roof deck that slopes down to the eaves?

Pitched roof

What should the fire department do when a hydrant is taken out-of-service? (589) [4.3.15] Contact the hydrant manufacturer Attempt to repair the hydrant Remove the stem nut Place "out-of-service" tags on the hydrant

Place "out-of-service" tags on the hydrant

To improve your ability to hear and be heard at an emergency incident

Place the microphone against your throat if you cannot be understood through your SCBA facepiece

What would be used to raise a vehicle that is on its roof or side?

Pneumatic lifting devices

Which air-pressurized rescue tool gives rescuers the ability to lift or displace objects that cannot be lifted with other rescue equipment and is air-pressurized?

Pneumatic lifting devices

How should prying tools be carried?

Pointed or sharp edges facing away from the body

Which is a guideline when using a winch?

Position the winch as close as possible to the object being pulled

Which type of sprinkler system valve includes a hollow metal post that houses the valve stem and a movable plate with the words OPEN and SHUT on it

Post indicator Valve (PIV)

Which type of sprinkler system valve includes a hollow metal post that houses the valve stem and a movable plate with the words OPEN and SHUT on it a. Chemical Pellet b. Flame detectors c. Post indicator Valve (PIV) d. Flush

Post indicator Valve (PIV)

According to NFPA 1001, which duty is a Fire Fighter I required to be able to perform

Prepare apparatus hose loads for response

What are cold roofs designed to do?

Prevent interior heat from escaping to the attic space and melting snow on the roof

How can revolving doors impact fire fighting operations?

Prevent movement of hose or equipment into the building

What is the purpose of a lockout/tagout device? (689) [4.3.18] Identify the area where the main power supply is located Prevent automatic sprinklers from accidentally being activated Identify the firefighter in charge of shutting down utilities Prevent power from being turned back on before it is safe

Prevent power from being turned back on before it is safe

Why is the division of labor necessary in the fire service

Prevents the duplication of effort

What is a detailed written plan that lists specific steps for approaching a recurring problem or situation

Procedure

When transferring Command, which information must be passed to the officer/firefighter assuming Command?

Progress toward the completion of tactical objectives

With regard to facility safety, NFPA 1500

Prohibits all tobacco use in the facilities

What is a chafing block designed to do? (599) [4.3.15] Provide a protective surface over hose when vehicles must drive over it Protect uncharged hose as it is being pulled over sharp corners of windowsills and roof edges Protect fire hose from abrasions caused when charged hoselines rub against other surfaces Carry, pull, and handle charged hoselines or secure charged hoselines to other objects

Protect fire hose from abrasions caused when charged hoselines rub against other surfaces

BSI methods are used to

Protect firefighters from being exposed to communicable diseases

How are rolling steel shutters often used?

Protect openings in an industrial fire wall

Which is a task the Fire Fighter II must know in order to assist in technical rescue incidents?

Provide direction on rescue tasks

In order to ensure the safety of personnel operating in hazardous areas, fire departments should

Provide members with at least one full set of PPE

The primary focus of fire and life safety presentations is to

Provide the public with information about risk reduction

The primary focus of fire and life safety presentations is to a. Help develop an emergency exit plan b. Provide the public with information about risk reduction c. May be needed as evidence if there is a fire in the home d. offer constructive solutions for correcting or eliminating hazards

Provide the public with information about risk reduction

What is the purpose of a standpipe? (609-610) [4.3.10] Combats friction loss in high-rise buildings Serves as a safe connection point for hoselines when fighting fires in underground spaces Provides a place to connect hose where preconnected hoselines cannot reach Prevents water hammer when drafting

Provides a place to connect hose where preconnected hoselines cannot reach

Having a lesson plan fore a fire and life safety presentation is important because it

Provides a road map for a variety of people to teach the lesson and ensure that all topics are covered

Having a lesson plan fore a fire and life safety presentation is important because it a. They provide a goal or purpose for the lesson b. The presenter knows the topic well and anticipates audience questions c. Provides a road map for a variety of people to teach the lesson and ensure that all topics are covered d. offer constructive solutions for correcting or eliminating hazards

Provides a road map for a variety of people to teach the lesson and ensure that all topics are covered

How does wind affect ground cover fire development? (710) [4.3.19] Provides fresh air that speeds up combustion Pushes smoke away from the fire area to allow for easier extinguishment Helps extinguish the flames and cool the area Affects the moisture content of live and dead fuels

Provides fresh air that speeds up combustion

Which category of telecommunications systems is in a central location, takes all emergency calls, then routes them to appropriate dispatchers?

Public Safety Answering Point (PSAP)

Which tool combines an axe with an adze

Pulaski

What is the first step in the PASS application method of operating a portable fire extinguisher? (267) [4.3.16] Pull the pin to break the thin wire or plastic seal. Point the nozzle at the top edge of the fire. Position downwind of the fire. Pick up the extinguisher and walk toward the fire.

Pull the pin to break the thin wire or plastic seal.

Which is an indicator for potential backdraft? (157) [4.3.11] Pulsing smoke movement around small openings in the building Turbulent, dark smoke coming from the open front door Heavy black smoke from numerous open windows Light, white smoke rising from the roof

Pulsing smoke movement around small openings in the building

What is the term for the capability of an apparatus to pump water while moving

Pump and roll

Which vehicle component consists of body material that surrounds the area of the rear tire?

Quarter panels

Which tool would best be suited for forcing a metal-clad inward-swinging door in a masonry wall?

Rabbit tool

Where do responders usually check for a pulse on an adult patient? (1031) [6.2.1] Femoral artery Brachial artery Radial and carotid arteries Pulmonary and iliac arteries

Radial and carotid arteries

By which mechanism of heat transfer does heat travel in a straight line at the speed of light, allowing heat to travel through vacuums and air spaces? (134) [4.3.11, 4.3.12] Radiation Reflection Convection Conduction

Radiation

On which type of roof are firefighters likely to be at risk of becoming trapped in the void space and falling through the original roof below?

Rain roof

To overcome physical barriers to radio communication, you may need to turn your body 90 degrees or

Raise the antenna up straight

Most fire departments are organized in a series of levels, with the intermediate levels made up of personnel assigned by:

Rank and duty

Which is a sign that a patient is in shock or is entering shock? (1041) [6.2.1] Warm skin that appears lightly bruised Rapid heart rate and breathing Red, blotchy skin Rapid heart rate and breathing Slowed heart rate and breathing

Rapid heart rate and breathing

Which rescue tool is the least stable of jacks and is prone to fail under heavy loads?

Ratchet-lever jack

Which type of lugs are shallow holes drilled into booster hose couplings that require a special spanner wrench to tighten

Recessed lugs

Which type of hose fitting would be used to connect a smaller hoseline to a larger supply line? (601) [4.3.15] Water thief Reducer Siamese Adapter

Reducer

What is the ratio of water in air compared to the maximum amount of water vapor the air can hold at a given temperature

Relative humidity

Which factor has the greatest effect on the moisture content of fuels

Relative humidity

What is an example of an unapproved modification to a building that could create hazardous conditions

Removal of fire detection and suppression systems

What is an example of an unapproved modification to a building that could create hazardous conditions a. A passive smoke control system b. Automatic dry c. Removal of fire detection and suppression systems d. Wet-pipe

Removal of fire detection and suppression systems

What is the next step after the scene has been assessed at a vehicle incident?

Remove roadway hazards???

Which forcible entry task is a pick-head axe well suited to perform

Remove shingles and other roof coverings

How can friction loss be overcome? (627-628) [4.3.7, 4.3.8, 4.3.10] Laying a longer stretch of hose from the hydrant Decreasing the size of the hose Decreasing the pressure at the pump Removing kinks and sharp bends from the hoseline

Removing kinks and sharp bends from the hoseline

Security doors and gates cause a problem for firefighters during forcible entry operations, because they:

Require extra planning and will delay entry

Security barriers such as bars, grilles, and Lexan windows:

Require specialized training and tools to force

Which type of specialized fire company generally has the primary duty of searching for victims and removing them from areas of danger or entrapment

Rescue Company

What is the purpose of a rapid intervention crew (RIO? (473) [4.3.9, 4.3.10] Rescue injured or trapped victims Perform a secondary search Perform a primary search Rescue injured or trapped firefighters

Rescue injured or trapped firefighters

Which is a characteristic of plastic cribbing?

Resists contamination from fuel, oil, or other substances

Which is an example of a security measure that can be put in place to protect evidence at the fire scene before suppression even begins? (759) [4.3.8, 4.3.14] Collecting and bagging up smaller pieces of potential evidence Restricting access to unauthorized personnel and bystanders Deploying salvage covers over openings of unaffected locations Placing a lockable trailer on site for evidence collection

Restricting access to unauthorized personnel and bystanders

Which type of lock is mounted on the inside surface of the door and is used as a supplemental lock for doors?

Rim lock

How should hard intake hose be cleaned after use?

Rinse with clear water

Which sprinkler system component is a section of vertical piping to which the sprinkler valve, fire department connection (FDC), and other components are attached

Riser

Which sprinkler system component is a section of vertical piping to which the sprinkler valve, fire department connection (FDC), and other components are attached a. Manual pull station b. Flame detectors c. Riser d. Ionization smoke detectors

Riser

Which activity would likely be the most effective and engaging way to teach older or middle school age children about fire safety

Role play or videos about risky behaviors

Which activity would likely be the most effective and engaging way to teach older or middle school age children about fire safety a. They provide a goal or purpose for the lesson b. Role play or videos about risky behaviors c. Provides a road map for a variety of people to teach the lesson and ensure that all topics are covered d. offer constructive solutions for correcting or eliminating hazards

Role play or videos about risky behaviors

To prevent damage to hose when storing it in racks, the hose should be:

Rolled with the male coupling inside the roll

How is the rate of discharge for a manually adjustable fog nozzle changed? (617) [4.3.10] Rotating the selector ring to the desired gpm (L/min) setting Pushing the bale forward or backward slowly Signaling the pump operator to reduce or increase the pressure Rotating the nozzle tip to choose a wider or narrower pattern

Rotating the selector ring to the desired gpm (L/min) setting

Which statement about maintaining personnel safety during training evolutions is accurate?

Rowdy play and other unprofessional conduct is not allowed because it is distracting and can lead to accidents or injuries

Which situation would require a firefighter to call a MAYDAY? (435) [4.2.4, 4.3.5, 4.3.9] Encountering a hazardous materials spill Portable radio malfunction Finding unidentified victims or occupants SCBA malfunction

SCBA malfunction

Which statement describes operations at a vehicle fire? (694) [4.3.7] The first priority at a vehicle fire is to enter the vehicle and turn off the ignition. A hazardous materials team must be called in for every vehicle incident due to the presence of flammable fuels. SCBA must be worn because of the toxic smoke and vapors that are produced. Vehicle fires pose fewer hazards to firefighters than structure fires do.

SCBA must be worn because of the toxic smoke and vapors that are produced.

In the ______, the accountability officer bases expected exit time on the team member who has the lowest air pressure reading

SCBA tag system

Which statement describes inspection of salvage covers? (755) [4.5.1] Salvage covers do not require inspection since they are disposable. Salvage covers must be cleaned using a special solution and then dried completely before they can be inspected. Salvage covers should be inspected for damage after they are dry. Salvage covers must be sent back to the manufacturer periodically for inspection.

Salvage covers should be inspected for damage after they are dry.

Class K rated extinguishers work because of ______, which converts fatty acids into a soapy film. (258) [4.3.16] Saponification Smothering Cooling Chemical flame inhibition

Saponification

What is the overall mission of the fire service?

Save lives and protect property and the environment

Which is the MOST effective tool for removing doubly laminated glass?

Saws

A type of fire departmental organizational structure where decisions and information are directed from the top and filtered down through intermediate levels to the base can be described as:

Scalar

Which passenger safety system includes pretensioners that present a significant ignition hazard if not disabled?

Seat belts

What should be done as part of vehicle overhaul after the fire has been extinguished? (697) [4.3.7] Remove the bumper struts Secure the air bags Apply foam to leaking fuels or fluids Check for electrical backfeed

Secure the air bags

What should be done to prevent damage when drying fire hose in hose towers or on racks?

Secure the couplings to the rack or tower

Which victims should receive the highest priority for extrication?

Seriously injured victims

The part of the coupling where it attaches to the hose is called the:

Shank

How can you help rescuers find you if you are forced to shelter in place? (439) [4.3.9] Leave all doors open and marked to indicate your location Shine a light through available windows to draw attention to your location Do not go far from your assigned area Remain in the fire compartment

Shine a light through available windows to draw attention to your location

What affect can wind have on hose streams? (625) [4.3.10] Shorten the stream's reach Make the stream more effective Make the stream more compact Increase the stream's reach

Shorten the stream's reach

Which is a characteristic of fog streams? (623-624) [4.3.10] Longer reach than straight streams Expose less water surface area than straight or solid streams Shorter reach than solid streams Less affected by wind than solid or straight streams

Shorter reach than solid streams

The techniques used in structural forcible entry:

Should do minimal damage and provide quick access

Which device would be used if multiple supply lines need to be merged into one hoseline, such as when LDH is not available to overcome friction loss in a long hose lay? (601) [4.3.15] Wye appliance Water thief appliance Gate valve appliance Siamese appliance

Siamese appliance

Which factor is likely to affect the speed with which a steel structural member fails under fire conditions? Select one: a.Size b.Exposure to foam extinguishing agents c.Where the steel is located in the structure d.Age

Size

A fire hose is labeled according to the:

Size of its inside diameter

A _____ is an example of a striking tool used for forcible entry

Sledge hammer

What occurs when a mixture of unburned fuel gases and oxygen come in contact with an ignition source? (165) [4.3.11] Smoke explosion Flashover Radiant combustion Spontaneous ignition

Smoke explosion

Why should personnel search behind doors and on the floor below windows? (460) [4.3.9] These places must be marked in the primary search. Smoke may overcome occupants while they are trying to escape. Visibility and air quality are best in these places. Occupants are most likely to find shelter in these places.

Smoke may overcome occupants while they are trying to escape.

If you are positioned to make fire attack, which condition would be important to communicate to your supervisor or the Incident Commander? (673) [4.3.10] Smoke that changes from gray to black All team members' PASS devices are functioning Amount of radiant heat felt by firefighters Presence of bystanders at the perimeter

Smoke that changes from gray to black

Firefighters are at risk of contracting respiratory disease such as lung cancer and COPD because of repeated exposure to

Smoke, dangerous gasses, and chemicals

Which method of extinguishment excludes oxygen from the burning process? (258) [4.3.16] Smothering Cooling Saponification Chemical flame inhibition

Smothering

Where should apparatus be parked at a vehicle extrication incident?

So that they form a protective barrier between the scene and oncoming traffic

How can firefighters identify whether or not a vehicle uses an alternative fuel? (699) [4.3.7] Firefighters must memorize the models of cars that use alternative fuel sources. Some alternative fuel vehicles have a visible logo on the front or rear of the vehicle. All alternative fuel vehicles are required to have DOT placards identifying their fuel source. Alternative fuel vehicles have fuel tanks that are a different shape than other vehicles.

Some alternative fuel vehicles have a visible logo on the front or rear of the vehicle.

When conducting a fire and life safety presentation, firefighters should

Speak clearly and loud enough so audience members can hear

When conducting a fire and life safety presentation, firefighters should a. Help develop an emergency exit plan b. Provide the public with information about risk reduction c. Speak clearly and loud enough so audience members can hear d. offer constructive solutions for correcting or eliminating hazards

Speak clearly and loud enough so audience members can hear

What may occur in an oxidation reaction when the heat generated exceeds the heat being lost? (129) [4.3.11] Spontaneous ignition Backdraft/flashover Arcing/sparking Piloted ignition

Spontaneous ignition

Why are buildings under construction more susceptible to fire spread? Select one: a.Structurally unsound construction b.High fuel loads c.Presence of Type I construction materials d.Sprinklers and FDCs are not yet operational

Sprinklers and FDCs are not yet operational

What is the purpose of a tensioned buttress system?

Stabilize vehicles resting on their sides or roofs

Which air movement equipment is used to position smoke ejectors and fans in doors and windows? (505) [4.3.11, 4.3.12] Air movement devices Stacking and hanging devices Hoselines and nozzles Flexible ducts

Stacking and hanging devices

Which is a common cause of residential fires that should be identified during a fire safety survey

Stacks of papers or clothing near a heater

Which is a common cause of residential fires that should be identified during a fire safety survey a. Listen actively, resolve the issue if possible, or refer them to someone who can help them if you cannot b. About the people who live and work in their community c. Stacks of papers or clothing near a heater d. To determine what hazards and what types of safety equipment are within the home

Stacks of papers or clothing near a heater

Which group of fire department employees provides administrative and logistical support in areas such as finance, maintenance, and training

Staff personnel

How does heat affect masonry? Select one: a.Stones and concrete may experience spalling when they are heated. b.Bricks will crumble after minimal exposure to heat and flame. c.Stones and concrete will crumble after exposure to direct flame. d.Bricks may experience spalling when they are heated. Feedback

Stones and concrete may experience spalling when they are heated.

For what purpose are wooden wedges designed to be used during salvage operations? (747) [4.3.14] Stop the flow of water from a damaged hoseline Stop water runoff Force entry through doors Stop the flow of water from an activated sprinkler

Stop the flow of water from an activated sprinkler

Which type of hose roll is commonly used when storing hose in a storage rack?

Straight roll

What determines the vehicle's structural integrity?

Strength of the vehicle's chassis after a collision

When using hand tools to breach exterior wood frame walls it is safest to:

Strike and make cuts towards the center of the opening you want to create first

Unlike a pick-head axe, a flat-head axe can be used to:

Strike another tool to force it into a doorjamb

Which is an assumption firefighters should make about any structure fire to guide their decisions when ventilating? (500) [4.3.11, 4.3.12] Fire is fuel-limited Structure consists of Type Il construction Fire will stay in the growth stage Structure consists of lightweight construction

Structure consists of lightweight construction

Which type of door is usually required as an exit door in a means of egress?

Swinging door

Which type of fire door is commonly used in stairwell enclosures?

Swinging fire door

If you can see the hinges of a door, it:

Swings towards you

Which channel would be assigned for fireground operations only

Tactical channel

What should you do if you find a forcible entry tool that is damaged?

Tag the tool, remove it from service, and send it to the proper authority

Whenever possible firefighters conducting preincident surveys should

Take photographs to show accurate details

Whenever possible firefighters conducting preincident surveys should a. A passive smoke control system b. partitions and openings c. Take photographs to show accurate details d. Those features may affect fire fighting tactics in that occupancy

Take photographs to show accurate details

Which would be appropriate to do during a presentation to a class of preschool children

Teach students that the firefighter is a friendly helper

Which would be appropriate to do during a presentation to a class of preschool children a. They provide a goal or purpose for the lesson b. Teach students that the firefighter is a friendly helper c. Provides a road map for a variety of people to teach the lesson and ensure that all topics are covered d. Use positive statements to tell the audience what to do instead of what not to do

Teach students that the firefighter is a friendly helper

Often referred to as dispatchers, the persons who are trained to answer emergency calls and obtain the correct information are

Telecommunicators

What communication center equipment is used to receive calls from individuals with hearing impairments

Teletype

What is the measurement of the average kinetic energy in the particles of a sample of matter? (127) [4.3.11] Temperature Heat Wattage Candlepower

Temperature

How does staying low to the floor improve survivability? (470) [4.2.4, 4.3.5] It removes toxins such as carbon monoxide (CO) It allows you to exit a structure more quickly This places a battier between you and the fire, allowing you more time to find an egress point Temperatures are cooler and air may be less contaminated

Temperatures are cooler and air may be less contaminated

Which glass is designed to spread small fracture lines throughout the plate when struck?

Tempered

What would be used to stabilize a vehicle that is on its roof or side by creating a stabilizing triangle?

Tensioned buttress systems

Which action should be avoided when service testing fire hose because it can cause damage to the hose? Select one: a. Closing valves slowly when charging the hose b. Laying large-diameter hose flat before charging it c. Testing hose in an area with rocks and debris d. Testing hose in an area with a slight uphill grade

Testing hose in an area with rocks and debris

Which location would likely be protected by a fire door?

The entrance to an office exit stairwell

What will occur if firefighters begin an attack on a ventilation-limited structure fire with ventilation alone? (163) [4.3.11] The fire's heat release rate and spread will progressively increase as additional vents are made. Hot gases will be pushed inward, toward the seat of the fire. Visibility will improve, clearing path to the seat of the fire. The fire's heat release rate will decrease temporarily until the introduced air is heated to the fuel's ignition temperature.

The fire's heat release rate and spread will progressively increase as additional vents are made.

A donut hose roll is advantageous because:

The firefighter controls both couplings

What factor helps determine the flow path in a structure fire? (161) [4.3.11] The floor plan and openings within the structure The nature and arrangement of the fuel The stage of development of the fire The temperature reactions of the structure and its contents

The floor plan and openings within the structure

Why should ventilation be immediately followed with exterior or interior fire attack to cool gases and surfaces in the fire room? (494) [4.3.11, 4.3.12] The ventilation crew is already in position to perform fire attack. The greater the time between ventilation and application of water, the greater the fire's growth. Ventilation will cause the fire to go into decay, making it easy to extinguish. Fire will enter ventilation-limited decay when water is applied.

The greater the time between ventilation and application of water, the greater the fire's growth.

What is cardiac arrest? (1032) [6.2.1] The heart stops beating and breathing stops The heart beats more slowly than normal The brain is traumatically injured The point where medical intervention can no longer help

The heart stops beating and breathing stops

What is a disadvantage of the flat hose load?

The hose folds contain sharp bends

Why can abandoned buildings pose great danger of fire and collapse? Select one: a.The exterior may be made of lightweight components. b.The interior may be gutted and altered. c.The exterior may be covered with flammable materials. d.The interior may be compartmentalized.

The interior may be gutted and altered.

What is the most obvious indicator that a location is the area of origin? (758) [4.3.8, 4.3.13] It is the location with the least amount of damage The location is furthest from the exit The location has the most damage It is the highest point adjacent to the damage

The location has the most damage

Which statement accurately describes how building materials and configuration affect fire behavior in a structure? Select one: a.Buildings with a high level of compartmentation are more susceptible to rapid fire spread. b.Buildings with lightweight engineered components are less likely to collapse unexpectedly. c.Fires in structures with a low fuel load have a lower tolerance to fire and will burn hotter than other fires. d.The longer the fire has burned, the more likely it is that structural integrity has been compromised.

The longer the fire has burned, the more likely it is that structural integrity has been compromised.

Fire and life safety presentations will be more successful if

The presenter knows the topic well and anticipates audience questions

Fire and life safety presentations will be more successful if a. Help develop an emergency exit plan b. The presenter knows the topic well and anticipates audience questions c. Speak clearly and loud enough so audience members can hear d. offer constructive solutions for correcting or eliminating hazards

The presenter knows the topic well and anticipates audience questions

The division of labor refers to

The process of dividing large jobs into smaller pieces to make them more manageable

Why should firefighters exit the IDLH before their low-pressure alarm activates? (436) [4.3.5, 4.3.9] The remaining air is insufficient to exit even if no emergencies occur. The remaining air is an average, not specific to each firefighter, so it may be insufficient to exit from both short and long distances. The remaining air is insufficient to exit from deep inside a large structure and does not take into account emergencies that may be encountered. Hearing the alarm may cause panic, which will speed up air consumption.

The remaining air is insufficient to exit from deep inside a large structure and does not take into account emergencies that may be encountered.

Why is it dangerous to work below the hot gas layer without attempting to cool it? (676) [4.3.10] The hot gas layer can break open windows, creating ventilation issues. The hotter the gas layer is, the more toxic the fumes are. The smoke contains fuel, and it may ignite at any time. The hot gas layer will continue to raise and cause damage to the ceiling and floors above.

The smoke contains fuel, and it may ignite at any time.

Which statement describes a fire in the incipient stage? (146) [4.3.11] The temperature is only slightly above ambient in areas that the fire, plume, and ceiling jet directly affect. The fire consumes the available fuel and the heat release rate begins to decline. The heat release rate of the fire has reached its peak because of lack of fuel or oxygen. The fire has grown large enough for compartment configuration and amount of ventilation to influence it.

The temperature is only slightly above ambient in areas that the fire, plume, and ceiling jet directly affect.

Which is a characteristic of outside screw and yoke (OS&Y) valves? (686) [4.3.14] They have a circular disk on top of the valve housing that indicates the valve's operation. The threaded portion of the screw is visible beyond the yoke when the valve is open. The threaded portion of the scr

The threaded portion of the screw is visible beyond the yoke when the valve is open.

What occurs during flashover? (154) [4.3.11] The volume of burning gases can increase to fill the room's entire volume and extend out of any openings from the room. The heat release rate of the fire will reach its peak. Flames propagate through the hot gas layer or across the ceiling. The compartment will fill with black smoke and slowly cooling fuel gases; the compartment will show no visible flames.

The volume of burning gases can increase to fill the room's entire volume and extend out of any openings from the room.

What may occur if water is added to a burning liquid that is less dense than water? (139) [4.3.10] The water may disperse the burning liquid instead of extinguishing it. The fuel's rate of vaporization will decrease due to the increased water pressure. The liquid fuel may vaporize much more rapidly as it draws thermal energy from the water. The water will mix with the burning liquid and become less effective at extinguishing the fire.

The water may disperse the burning liquid instead of extinguishing it.

Which condition should be noted because it may be a potential sign of arson? (760-761) [4.3.8, 4.3.13] The fire occurs in the middle of the night. There are many bystanders at the scene. It is cold outside, and the furnace is operating. There is a car blocking access to the fire hydrant.

There is a car blocking access to the fire hydrant.

What can be used to monitor the impact of ventilation and identify possible ventilation locations? (504) [4.3.11, 4.3.12] Flexible ducts Smoke control devices Oxygen monitors Thermal imagers

Thermal imagers

Which is a characteristic of master stream devices? (628-631) [4.3.10] The person operating the device must be certified to at least the Fire Fighter Il level. They cannot flow as much water as handlines inside the structure. They deliver a large volume of water which can increase the chance of structural collapse. Multiple LDH supply lines are required.

They deliver a large volume of water which can increase the chance of structural collapse.

Why are personnel accountability systems vital to emergency incident operations

They identify which personnel are working at a scene and help the IC determine if any firefighters are trapped inside

One problem with breaching interior and exterior walls is that:

They may conceal electrical wires and gas pipes

Why should presentations be developed around learning objectives

They provide a goal or purpose for the lesson

Why should presentations be developed around learning objectives a. They provide a goal or purpose for the lesson b. The presenter knows the topic well and anticipates audience questions c. Speak clearly and loud enough so audience members can hear d. offer constructive solutions for correcting or eliminating hazards

They provide a goal or purpose for the lesson

Why are sliding doors not allowed as part of the means of egress?

They slow travel of people through the door opening.

Why is it important to include accurate drawings or diagrams of building features when conducting a preincident survey

Those features may affect fire fighting tactics in that occupancy

Why is it important to include accurate drawings or diagrams of building features when conducting a preincident survey a. A passive smoke control system b. Automatic dry c. Removal of fire detection and suppression systems d. Those features may affect fire fighting tactics in that occupancy

Those features may affect fire fighting tactics in that occupancy

K-tools and shove knives are used for:

Through-the-lock forcible entry

When do salvage operations take place? (750) [4.3.14] After the fire investigation has been finished After extinguishment, but before the fire investigation Throughout the duration of the incident Only after the fire has been extinguished

Throughout the duration of the incident

Which action would be done when creating a fire line? (714) [4.3.19] Scatter all unburned material into the black. Stop applying water to the fire until the line is complete. Throw all burned material into the black. Clear only the top layer of burned fuels from the ground.

Throw all burned material into the black.

Fire and life safety surveys are performed in private dwellings

To determine what hazards and what types of safety equipment are within the home

Fire and life safety surveys are performed in private dwellings a. Listen actively, resolve the issue if possible, or refer them to someone who can help them if you cannot b. About the people who live and work in their community c. How to prepare for fire or severe weather d. To determine what hazards and what types of safety equipment are within the home

To determine what hazards and what types of safety equipment are within the home

Why must firefighters use tactics that control the oxygen available to the fire when they advance a hoseline through a door or ventilate windows? (162) [4.3.11] To prevent unwanted fire spread To maintain structural integrity To increase the pressure inside the compartment To transition the fire to a ventilation-limited environment

To prevent unwanted fire spread

Which statement about tools used in rescues is correct?

Tools from different manufacturers may have different capabilities

Which type of map details changes in elevation

Topographic

What is the term for the natural and human-made features of land

Topography

Which hazard is associated with a hybrid electric vehicle that is on fire? (702) [4.3.7] Flammable air bags Toxic fumes Fuel tanks that rupture easily Invisible flames

Toxic fumes

Which hazard are firefighters likely to encounter during overhaul? (741) [4.3.10, 4.3.13] Flashover Toxic gases Spalling Severe burns

Toxic gases

Which preconnected hose load has hose folds that are laid into the hose bed in an S-shape?

Triple layer load

Which rescue tool is used to create an anchor point above a manhole or other opening?

Tripod


Kaugnay na mga set ng pag-aaral

taxes, retirement, and other insurance concepts

View Set

Torts - Strict Liability + Enterprise Liability

View Set

Chapter 18 Intermediate Accounting

View Set

Ch 9 Industrial Revolution (9.4)

View Set