Lift Safety Quiz
Lift swing arm restraints are to be used only by non-experienced employees, because they will prevent the vehicle from falling.
False
After a vehicle has been properly spotted on the lift, the vehicle should be raised slightly and checked for stability.
True
If a lift is not working properly, it should be checked by a qualified lift service technician before use
True
The vehicle's weight must be considered before deciding which type of lift to use.
True
. Automotive lifts are technicians' tools, and therefore repairs should always be made by automotive service technicians
false
. Knowing the vehicle's approximate center of gravity is not important as long as you know the total vehicle weight does not exceed the capacity of the lift.
false
. Since lifts may be used as selling tools for parts and services, it's okay to allow customers and bystanders in the area while the lift is in use.
false
. Spotting front-wheel drive vehicles is not as crucial as rear-wheel drive vehicles because they are generally smaller and lighter
false
. You should read the lift's safety and operating instructions only if you've never used an automotive lift before.
false
. You should use wood blocks or other homemade extenders if you need clearance for low-hanging underbody components.
false
Automotive lift accidents never occur with experienced operators.
false
Frame-engaging lift adapters can be placed anywhere under the vehicle's body, frame or suspension.
false
Operating a damaged lift is okay as long as your supervisor knows what you are doing.
false
There's no need for regular inspection and care of a lift as long as it goes up and down smoothly.
false
Under some conditions, it is okay for people to remain in the vehicle while it is being raised.9
false
. It is the lift owner's responsibility to educate all employees on proper lift procedures.
true
. When using an asymmetrical lift, the vehicle's center of gravity is important for proper
true
Before lowering the lift, all objects should be removed from beneath the lift.
true
High reach supplementary stands should be used to stabilize a raised vehicle and when a particularly heavy part is
true
Only workers who have been properly trained in the operation of automotive lifts should be allowed to use the lifts
true
Operating controls should never be blocked or tied in an open position.
true
The operating controls are "Hold-to-run" type.
true
