Linux 2 ch 12

/27

Upon running the ifconfig command, the IP address is listed along with the subnet mask in dotted decimal notation listed as 255.255.255.224. You have installed a remote access software that has an address field that requires the address to be configured in CIDR notation. Which of the following is the equivalent CIDR notation for the subnet mask listed? a. /24 b. /27 c. /23 d. /28

TCP/IP

What is the most commonly used LAN protocol? a. TCP/IP b. DLC c. UDP/IP d. IPX/SPX

UDP

You have set up a TFTP server to support PXE booting of several workstations. Which of the following protocols would this setup make use of? a. UDP b. ICMP c. IGMP d. TCP

nmcli

On a system running NetworkManager, which of the following commands can be used to view or modify connection information? a. netctonf b. nm c. nmcli d. netman

48

The output of the ifconfig shows a HWaddr expressed in hexadecimal. How many bits is the hardware address shown made up of? . 32 b. 8 c. 128 d. 48

a. ifup eth0

The system administrator has shut ethernet interface eth0 down while making some changes to the system. Which of the following commands can they use to bring the network connection back up? a. ifup eth0 b. interface eth0 --status up c. netctl eth0 up d. int eth0 up

/etc/services

What is the complete path and filename of the file where ports and their associated protocols are defined? ___________

known_hosts

When connecting to a host via SSH for the first time, the user is prompted to accept the encryption fingerprint for the target computer which is stored in ___________ in the ~/.ssh/ directory.

b. nameserver 10.1.1.4 d. domain comptia.org

Which of the following are valid statements in the /etc/resolv.conf file? (Choose two.) a. 10.1.15.60 server10 b. nameserver 10.1.1.4 c. order hosts, bind d. domain comptia.org

ss

Which of the following commands can be used to display socket information out to the terminal screen? a. ss b. sstat c. opensocks d. woolsocks

traceroute6 tracepath6

Which of the following commands can be used to trace an IPv6 route? (Choose two.) a. trace6 b. traceroute6 c. tracepath6 d. tracert6

a. getent

Which of the following will display entries from the Name Service Switch libraries? a. getent b. dispdet c. nss d. nsslist

ethtool

Which of the following commands will display detailed information for network hardware? lshw --net b. hwdisp --network c. lsnet d. ethtool

ping -c 4 server1

Which of the following commands will send 4 ICMP echo requests to a remote host named server1 to determine the round trip time it takes a packet to travel? a. ping -4 server1 b. ping server1 c. ping -c 4 server1 d. ping -n 4 server1

b. netstat --udp d. netstat -u

Which of the following commands will show active UDP connections on a Linux system? (Choose all that apply.) a. netstat -t udp b. netstat --udp c. netstat udp d. netstat -u

b. /etc/hostname

Which of the following files does the hostnamectl command modify to set the hostname on a machine? a. /etc/host.conf b. /etc/hostname c. /etc/hostname.conf d. /etc/hosts.conf

c. 169.254.38.101

Which of the following is a valid APIPA address? 10.11.12.13 b. 192.168.1.17 c. 169.254.38.101 d. 127.0.0.1

files

Which of the following is the keyword that should be listed after the hosts statement in the /etc/nsswitch.conf file so that the system will consult the /etc/hosts file to resolve a name to an IP address? a. etchosts b. local c. files d. hosts

53

Which of the following ports would be used to resolve a domain name to an IP address? a. 69 b. 443 c. 53 d. 23

VPN

Which of the following types of technologies will create a tunneled encrypted connection from a remote location into a corporate network to be able to access resources as if the user was physically connected to the LAN? a. VPN b. ADSL c. NTP d. VLAN

b. /etc/nsswitch.conf

You currently have a Linux system configured to check the /etc/hosts file before trying to contact a DNS server to resolve host names. You want to reverse the configuration so that it checks with a DNS server before falling back to the /etc/hosts file. Which of the following files should you modify to make this possible? a. /etc/named.conf b. /etc/nsswitch.conf c. /etc/resolv.conf d. /etc/hosts

a. hostnamectl set-hostname server1

You run the command hostname server1 and issue the reboot command. You notice that the host name has reverted back to what it was before the reboot. Which of the following commands should you have used to change the host name instead? a. hostnamectl set-hostname server1 b. set hostname="server1" c. host server1 d. ifconfig server1