stats quiz 6

Pataasin ang iyong marka sa homework at exams ngayon gamit ang Quizwiz!

Consider the following ANOVA table. ​ Sourceof Variation Sumof Squares Degreesof Freedom MeanSquare F Between Treatments 2073.6 4 Between Blocks 6000 5 1200 Error 20 288 Total 29 ​ The mean square due to treatments equals

518.4

Consider the following ANOVA table. ​ Sourceof Variation Sumof Squares Degreesof Freedom MeanSquare F Between Treatments 2073.6 4 Between Blocks 6000 5 1200 Error 20 288 Total 29 ​ The sum of squares due to error equals

5760

The ANOVA procedure is a statistical approach for determining whether or not the means of

three or more populations are equal.

In the ANOVA, treatments refer to

different levels of a factor

Part of an ANOVA table is shown below. Source ofVariation Sum ofSquares Degreesof Freedom MeanSquare F Between Treatments 64 8 Within Treatments (Error) 2 Total 100 ​ The mean square due to treatments (MSTR) is

16

The critical F value with 6 numerator and 60 denominator degrees of freedom at α = .05 is

2.25

Part of an ANOVA table is shown below. Source ofVariation Sum ofSquares Degrees ofFreedom MeanSquare F Between Treatments 180 3 Within Treatments (Error)TOTAL 480 18 ​ The mean square due to error (MSE) is

20

Part of an ANOVA table is shown below. Source ofVariation Sum ofSquares Degreesof Freedom MeanSquare F Between Treatments 64 8 Within Treatments (Error) 2 Total 100 ​ The number of degrees of freedom corresponding to between-treatments is

4

In an analysis of variance where the total sample size for the experiment is nT and the number of populations is k, the mean square due to error is

SSE/(nT - k)

The mean square is the sum of squares divided by

its corresponding degrees of freedom

Consider the following information. ​ SSTR = 6750H0: μ1 = μ2 = μ3 = μ4SSE = 8000Ha: At least one mean is different ​ If n = 5, the mean square due to error (MSE) equals

500

The F ratio in a completely randomized ANOVA is given by

MSTR/MSE

The critical F value with 8 numerator and 29 denominator degrees of freedom at α = .01 is

3.20

Part of an ANOVA table is shown below. Source ofVariation Sum ofSquares Degrees ofFreedom MeanSquare F Between Treatments 180 3 Within Treatments (Error)TOTAL 480 18 ​ The test statistic is

3.00

To test whether or not there is a difference between treatments A, B, and C, a sample of 12 observations has been randomly assigned to the 3 treatments. You are given the results below. Treatment Observations A 20 30 25 33 B 22 26 20 28 C 40 30 28 22 ​ The mean square due to error (MSE) equals

34

To test whether or not there is a difference between treatments A, B, and C, a sample of 12 observations has been randomly assigned to the 3 treatments. You are given the results below. ​ Treatment Observations A 20 30 25 33 B 22 26 20 28 C 40 30 28 22 ​ The mean square due to treatments (MSTR) equals

36

In an analysis of variance problem if SST = 120 and SSTR = 80, then SSE is

40

An ANOVA procedure is applied to data obtained from 6 samples where each sample contains 20 observations. The critical value of F occurs with

5 numerator and 114 denominator degrees of freedom

When an analysis of variance is performed on samples drawn from k populations, the mean square due to treatments (MSTR) is

SSTR/(k - 1)

Consider the following ANOVA table. ​ Sourceof Variation Sumof Squares Degreesof Freedom MeanSquare F Between Treatments 2073.6 4 Between Blocks 6000 5 1200 Error 20 288 Total 29 ​ The test statistic to test the null hypothesis equals

1.8

Part of an ANOVA table is shown below. Source ofVariation Sum ofSquares Degreesof Freedom MeanSquare F Between Treatments 64 8 Within Treatments (Error) 2 Total 100 ​ If we want to determine whether or not the means of the populations are equal, the p-value is

less than .01

To test whether or not there is a difference between treatments A, B, and C, a sample of 12 observations has been randomly assigned to the 3 treatments. You are given the results below. ​ Treatment Observations A 20 30 25 33 B 22 26 20 28 C 40 30 28 22 ​ The test statistic to test the null hypothesis equals

1.06

An ANOVA procedure is used for data obtained from five populations. Five samples, each comprised of 20 observations, were taken from the five populations. The numerator and denominator (respectively) degrees of freedom for the critical value of F are

4 and 95

An experimental design where the experimental units are randomly assigned to the treatments is known as

completely randomized design

To test whether or not there is a difference between treatments A, B, and C, a sample of 12 observations has been randomly assigned to the 3 treatments. You are given the results below. ​ Treatment Observations A 20 30 25 33 B 22 26 20 28 C 40 30 28 22 ​ The null hypothesis for this ANOVA problem is

μ1 = μ2 = μ3

Consider the following ANOVA table. ​ Sourceof Variation Sumof Squares Degreesof Freedom MeanSquare F Between Treatments 2073.6 4 Between Blocks 6000 5 1200 Error 20 288 Total 29 ​ The null hypothesis for this ANOVA problem is

μ1 = μ2 = μ3 = μ4 = μ5

In an analysis of variance problem involving 3 treatments and 10 observations per treatment, SSE = 399.6. The MSE for this situation is

14.8

Consider the following information. ​ SSTR = 6750H0: μ1 = μ2 = μ3 = μ4SSE = 8000Ha: At least one mean is different ​ The mean square due to treatments (MSTR) equals

2250

An ANOVA procedure is used for data obtained from four populations. Four samples, each comprised of 30 observations, were taken from the four populations. The numerator and denominator (respectively) degrees of freedom for the critical value of F are

3 and 116

An ANOVA procedure is used for data that was obtained from four sample groups each comprised of five observations. The degrees of freedom for the critical value of F are

3 and 16

Consider the following information. ​ SSTR = 6750H0: μ1 = μ2 = μ3 = μ4SSE = 8000Ha: At least one mean is different ​ If n = 5, the test statistic to test the null hypothesis equals

4.50

Part of an ANOVA table is shown below. Source ofVariation Sum ofSquares Degrees ofFreedom MeanSquare F Between Treatments 180 3 Within Treatments (Error)TOTAL 480 18 ​ The mean square due to treatments (MSTR) is

60

Consider the following information. ​ SSTR = 6750H0: μ1 = μ2 = μ3 = μ4SSE = 8000Ha: At least one mean is different ​ The null hypothesis is to be tested at the 5% level of significance ( n = 5). The p-value is

between .01 and .025

To test whether or not there is a difference between treatments A, B, and C, a sample of 12 observations has been randomly assigned to the 3 treatments. You are given the results below. ​ Treatment Observations A 20 30 25 33 B 22 26 20 28 C 40 30 28 22 ​ The null hypothesis is to be tested at the 1% level of significance. The p-value is

greater than .1

Consider the following ANOVA table. ​ Sourceof Variation Sumof Squares Degreesof Freedom MeanSquare F Between Treatments 2073.6 4 Between Blocks 6000 5 1200 Error 20 288 Total 29 ​ The null hypothesis is to be tested at the 5% level of significance. The p-value is

greater than .10

Part of an ANOVA table is shown below. Source ofVariation Sum ofSquares Degreesof Freedom MeanSquare F Between Treatments 64 8 Within Treatments (Error) 2 Total 100 ​ At a 5% level of significance, if we want to determine whether or not the means of the populations are equal, the conclusion of the test is that

not all means are equal

Consider the following information. ​ SSTR = 6750H0: μ1 = μ2 = μ3 = μ4SSE = 8000Ha: At least one mean is different ​ The null hypothesis is to be tested at the 5% level of significance (n=5). The null hypothesis

should be rejected

Consider the following ANOVA table. ​ Sourceof Variation Sumof Squares Degreesof Freedom MeanSquare F Between Treatments 2073.6 4 Between Blocks 6000 5 1200 Error 20 288 Total 29 ​ The null hypothesis is to be tested at the 5% level of significance. The null hypothesis

should not be rejected

To test whether or not there is a difference between treatments A, B, and C, a sample of 12 observations has been randomly assigned to the 3 treatments. You are given the results below. ​ Treatment Observations A 20 30 25 33 B 22 26 20 28 C 40 30 28 22 ​ The null hypothesis is to be tested at the 1% level of significance. The null hypothesis

should not be rejected

In a completely randomized experimental design involving five treatments, 13 observations were recorded for each of the five treatments (a total of 65 observations). Also, the design provided the following information. ​ SSTR = 200 (Sum of Squares Due to Treatments)SST = 800 (Total Sum of Squares) ​ The sum of squares due to error (SSE) is

600


Kaugnay na mga set ng pag-aaral

Ch. 13 - Contract Performance, Breach, and Remedies

View Set

Ch. 18 Module 1: Section 18.01 Dynamic Study Module

View Set

Ch. 15 Questions Abnormal psychology comer

View Set

ATI Infection Control (Pretest), ATI Fundamentals, ATI FUNDAMENTALS FINAL, ATI Chapter 12-Client safety, ATI - Respiratoryyy, week 5 Fundamentals (ATI) Vital Signs, ATI Chapter 40- Mobility and Immobility, Learning System:RN-Communication, ATI fundam...

View Set

AP Biology 018- Positive and Negative Feedback Loops Video Review Sheet

View Set