Adobe Premiere Pro CS6 Test 3 Review

Réussis tes devoirs et examens dès maintenant avec Quizwiz!

11.2.5 Audio Meters have a scale, which of the following represents the highest volume? 0 (zero) -12 -24 -60

0 (zero)

18.5.3 The following statements about the Use Preview check box when exporting media are all true EXCEPT: A. If you select Use Previews, Adobe Premiere Pro and Adobe Media Encoder will use any existing previews that have been created to accelerate compression time - at the cost of quality. B. By deselecting this option, Adobe Premier Pro and Adobe Media Encoder will create compressed files at a higher quality because the original source medial will be referenced. C. The Use Preview check box should only be selected when you need draft-quality output and you are in a big rush. D. By selecting Use Previews it will lengthen encoding time, but produce the highest quality.

D

12.2.2 Which audio effect, when applied, detects and removes hiss or noise automatically?

DeNoiser

12.2.1 Which audio effect has the ability to add a slight (pronounced) echo to your audio track?

Delay

12.2.4 Analyze the audio clip below, Rue the Whirl.aif. Which parameter of the DELAY EFFECT can be adjusted to set the time before the echo plays?

Delay

12.4.18 The _____ audio effect allows the editor to adjust parameters such as AutoGate, Compressor, Expander and Limiter.

Dynamics

9.4.1 What can you use to start an object rotating gradually and have it stop rotating slowly?

Ease in, Ease out

13.3.8 To copy all the effects from one clip and paste them to another clip, you can:

Edit>Copy and Edit>Paste Attributes

18.3.1 In the picture below, the 3rd button, that looks like a camera does what function?

Export Frames

10.3.2 TRUE or FALSE: When the various camera angles of a multicamera sequence were started at different times, one method you might choose to accurately sync the angles is by the clips' In points.

False

10.4.4 TRUE or FALSE: Once you have recorded your multicamera sequence, you can no longer make changes to it.

False

11.2.2 TRUE or FALSE: Once set in a sequence you can never add or remove audio tracks at any time.

False

15.4.1 TRUE or FALSE: The only place you can adjust the overall opacity of a clip using keyframes is on the Timeline.

False

13.1.1 Clips that have been added to a sequence automatically have some effects applied. These effects are called:

Fixed

11.3.2 The number of times the surface of a speaker beats the air per second is called _____.

Frequency

15.7.3 To create your own mattes, you can use a _____ _____ that will allow you to define a shape that will act as a cut-out for your video.

Garbage Matte

11.2.6 Standard Audio Track types are Mono clips and Stereo clips. Premier Pro displays these as two different color clips, which color is stereo?

Green

15.3.2 A weatherman shown standing in front of a map on the new is most likely standing in front of a _____ instead.

Greenscreen

18.5.1 What encoding format should you use when exporting to most mobile devices?

H.264

12.4.13 The _____ audio filter can be applied to an audio track to remove all frequencies that fall below a certain frequency.

Highpass

12.4.16 Analyze the audio clip, Sonoma-Left.wav in the image. Which effect was applied to remove all frequencies that fall below 1495 Hz?

Highpass

10.3.1 When creating a multicamera sequence, what is a method of determing the sync points?

In or Out Points, Markers

18.71.1 When you click Record in the Export to Tape dialog, your camcorder remains paused. What's going on?

It's rendering

11.7.1 Which split edit has the lower part (audio) to the left of the upper part (video)?

J-cut

13.5.10 You can change almost all parameters for all video effects over time through the use of:

Keyframes

11.8.2 Which split edit has the lower part (audio) to the right of the upper part (video)?

L-cut

13.5.13 The default keyframe interpolation behavior, which creates a uniform rate of change between keyframes, is:

Linear

11.3.1 When examining Audio characteristics, the taller the waveform the _____ for that channel.

Louder

12.4.14 The _____ audio filter can be applied to an audio track to remove all frequencies that fall above a certain frequency.

Lowpass

Analyze the audio clip, Sonoma-Left.wav in the image above. Which effect was applied to remove all frequencies that fall above 1495 Hz?

Lowpass

10.3.3 To add a marker to a clip, you can click the Add Marker button, or simply press the ___ key.

M

18.4.1 A _____ _____ is a self-contained digital file that contains all of the content of your sequence at its highest resolution and can be used to produce other compressed output formats.

Master Copy

15.6.2 Adobe Premier Pro has a powerful, fast and intuitive Chromakey effect called _____ _____.

Ultra Key

13.7.14 To remove jitter caused by camera movement, apply the _____ _____ effect.

Warp Stabilizer

13.2.5 Which category of effects indicates that the effect is greatly enhanced by the graphics processing unit (GPU)?

Accelerated Effects

13.4.9 Premiere Pro allows you to apply a single effect to multiple clips through an _____ layer. This layer makes it easier to adjust a single effect rather than multiple instances.

Adjustment

Which Adobe software can be used in conjunction with Premiere Pro to perform more advanced noise reduction editing?

Adobe Audition

15.6.1 You can selectively adjust the alpha for pixels based on their _____. (Select all that apply) A. Position on the screen B. Brightness C. Color D. Audio E. Duration

All but D

10.1.1 Which of the following are events that could benefit from multi-cam editing? (Choose all that apply) Visual and special effects Action scenes Once-in-a-lifetime events (such as weddings or sporting events) Musical and theatrical performances Talk Show formats

All choices

12.2.5 The _____ audio effect can be used to change the overall tone, energy level, age or species of a speaker?

Pitchshifter

10.4.2 The editing of multiple camera angles is referred to as

Recording

9.2.3 What button do you click in order to return a clip to its default Motion settings?

Reset

12.2.6 The _____ effect is better suited to musical tracks. It can be used to stimulate how a sound would be perceived in different types of rooms.

Reverb

9.2.1 With the Motion effect, you can adjust the _____, _____, or _____ of a clip.

Scale, rotation, or position

12.3.10 To create a new audio submix in Premiere Pro, you would right-click (control-click) on an audio track header in the timeline and choose Add Tracks or click on the _____ menu item and choose

Sequence

12.3.11 Analyze the clip below, 04 Submixes. The audio on Track 3 has been _____.

Soloed

12.3.9 If you want to maintain sound consistency and apply the same effects to more than one track, you could create a _____ in Premiere Pro.

Submix

13.1.4 Which effect allows you to slow down, speed up or reverse clip playback?

Time Remapping

11.2.1 The Audio Mixer primarily makes changes to _____

Tracks

9.2.2 In the Image below, which tool has been selected?

Transform

15.4.3 The lower the yellow keyframe rubber band stretching across a clip, the more _____ that clip is.

Transparent

10.2.2 TRUE or FALSE: The multicamera editing process has a very standardized workflow; therefore, it is essential to follow the steps in order because of the complicated nature of the process.

True

10.3.4 TRUE or FALSE: A multicamera sequence is a specialized type of sequence that is designed for multicamera editing.

True

10.3.5 TRUE or FALSE: A multicamera sequence will behave like a clip in your sequence; however, this clip has multiple angles of footage to choose from as you edit.

True

11.2.3 TRUE or FALSE: Audio Master Track output, meaning the number of channels your sequence will output is set when you create a sequence and cannot be changed.

True

13.3.7 True/False: You are able to reorder standard effects in Premiere Pro but you are unable to reorder fixed effects.

True

15.3.1 TRUE or FALSE. The process of selectively making pixels transparent based on their color or brightness is called keying.

True

18.2.1 Which of the following are export options in Adobe Premier Pro. -A whole sequence as a single file to post to the web or burn to a disc -A single frame or a series of frames to post to the Web or attack to an email -Audio-only or video-only -Export directly to videotape -All of the above

All of the above

15.2.1 Adobe Premier Pro uses three grayscale channels to produce the primary color channel, red, green and blue (RGB). There is a fourth grayscale channel called a (n) _____ channel.

Alpha

9.2.4 By default, the _____ _____ is the center of a clip.

Anchor point

11.9.1 If you wanted to produce a 5.1 mix for surround sound, which Adobe package would be the best to create it?

Audition

13.5.12 The keyframe interpolation that create a smooth rate of change through a keyframe is:

Auto Bezier

12.2.3 The ____ audio effect can increase the low-end frequency of an audio clip. It works well on narration, especially with male voices.

Bass

13.5.11 The keyframe interpolation that allows you to manually adjust the shape of the graph on either side of the keyframe is the:

Bezier

10.4.7 All of the following statements are TRUE regarding multicamera editing EXCEPT for which one? A. You can use any of the timeline editing tools to change the edit points of a multicam sequence. B. You can replay the multicam sequence with the Multi-Camera Monitor from any point to re-edit the project. C. The audio of all clips will bled together during a multicam edit. D. You can sync multiple clips based on a clap or loud noise in the audio track.

C

Which of the reasons below is NOT a purpose for applying sound effects in video editing? A. Stimulate reality B. Create an illusion C. Distract the viewer D. Set the mood

C

11.2.7 When recording stereo audio, which channel is normally used for rights?

Channel 2

11.2.8 If you master audio level peaks using static, the audio meters will show red indicators at the top. How can you reset them?

Click the red indicators or Right click and select reset indicators

11.8.1 Which is applied first, clip volume adjustments or track volume adjustments?

Clip volume adjustments

15.1.1 The process of layering clips on upper and lower tracks that become foreground and background elements in one blended image is referred to as _____.

Composing

9.3.2 Once you've applied effects to one clip, you can save time by reusing them on other shots. To do so, you would Copy>_____ _____

Paste Attributes

9.3.1 The default is that any item added to your sequence comes in at _____ percent of its original size.

100

15.5.1 Usually, where text exists, pixels have ___% opacity, and where there is no text, pixels usually have ___% opacity.

100, 0

15.3.4 An image , shape, or video clip used to identify a region of your foreground image that should be transparent or semitransparent is called a _____.

Matte

11.2.4 Which Audio Master Track output has only one Audio Channel?

Mono

11.2.9 Using Premiere Pro, what are the four types of Audio tracks you can create?

Mono, Standard, 5.1, and Adaptive

13.1.2 Which effect allows you to animate, rotate and scale a clip?

Motion

10.4.3 What is the name of the window shown in the image below

Multicamera Monitor

10.4.5 You can make changes to the chosen angles in a multicamera edit by first opening up which window?

Multicamera Monitor

12.3.12 In the image below, Audio Track 1 has been _____.

Muted

18.5.2 Do you have to open a project in Adobe Premiere Pro before exporting it in Adobe Media Encoder?

No, it is a standalone program

15.4.4 The default blending mode for all clips is _____.

Normal

12.4.15 The _____ effect is useful for removing all frequencies that are near a specified value or range. This effect is used to remove those sounds such as power-line humus and other electrical interference.

Notch

10.4.6 Describe 2 ways you can switch angles in a multicam edit.

Number keys or click the desired camera angle in the Multicamera monitor

13.1.3 Which effect allows you to control the transparency of a clip?

Opacity

15.2.2 An alpha channel defines no color at all. Instead it defines _____.

Opacity

15.4.2 By default, the yellow keyframe rubber band stretching across a clip represents its _____.

Opacity

10.4.1 Under which menu can you open the Multi-Camera Monitor?

Window

13.2.6 Which category of effects is used to process color by breaking the clip down into 3 channels?

YUV Effects


Ensembles d'études connexes

An overview of the speech process

View Set

Completing The Application, Underwriting, And Delivering The Policy

View Set

Endocrine - MEDSURG FINAL: CH 49 - Endocrine System

View Set

Ch. 6 Bones and bone structure study guide

View Set

Chapter 1 "The Sociological Perspective" MC

View Set

Completing The Square / Instruction

View Set

HW5 - Fill in the blank/Multiple choice

View Set

CA life and Health: Life Insurance Basics

View Set