Audit Chapter 15

Réussis tes devoirs et examens dès maintenant avec Quizwiz!

27) When deciding on the acceptable risk of assessing control risk too low, the auditor needs to: A) rely on his/her professional judgment. B) err on the side of conservatism. C) consult the professional standards. D) follow SEC guidelines.

Answer: A Terms: Acceptable risk of assessing control risk too low Diff: Challenging Objective: LO 15-5 AACSB: Reflective thinking skills

12) Auditors who prefer statistical to nonstatistical sampling believe that the principal advantage of statistical sampling flows from its ability to: A) quantify sampling risk. B) promote a more legally defensible procedural approach. C) define the precision required to provide audit satisfaction. D) establish conclusive audit evidence with decreased audit effort.

Answer: A Terms: Advantage of statistical sampling over nonstatistical sampling Diff: Challenging Objective: LO 15-2 AACSB: Reflective thinking skills

7) The advantage of systematic sample selection is that: A) it is easy to use. B) there is limited possibility of it being biased. C) it is unnecessary to determine if the population is arranged randomly. D) it automatically selects items material to the financial statements.

Answer: A Terms: Advantage of systematic sample selection Diff: Moderate Objective: LO 15-3 AACSB: Reflective thinking skills

11) An advantage of using statistical sampling techniques is that such techniques: A) mathematically measure risk. B) eliminate the need for judgmental decisions. C) define the values of precision and reliability required to provide audit satisfaction. D) have been established in the courts to be superior to judgmental sampling.

Answer: A Terms: Advantage of using statistical sampling techniques Diff: Challenging Objective: LO 15-2 AACSB: Reflective thinking skills

3) If the auditor decides to assess control risk at the moderate level in a private company audit, when in previous years the auditor set control risk at the maximum level, then tests of controls for the current year would be: A) increased in number. B) reduced in number. C) not performed. D) unchanged from prior planned settings.

Answer: A Terms: Assess control risk Diff: Easy Objective: LO 15-5 AACSB: Analytic skills

5) In the evaluation of the results of an attributes sample, the fact that the exception rate in the sample was 2% rather than the estimated population exception rate of 4% would cause the computed upper exception rate to: A) be less than the tolerable exception rate. B) equal the tolerable exception rate. C) exceed the tolerable exception rate. D) cannot be determined from the information given.

Answer: A Terms: Attributes sample; Exception rate in sample, estimated population exception rate, and computed upper exception rate Diff: Challenging Objective: LO 15-7 AACSB: Reflective thinking skills

3) As the auditor you are assessing the proper sample size to use in testing controls. When using attributes sampling which of the following is most correct? A) A 10% change in population size will have the least effect on sample size. B) A 10% change in the tolerable deviation rate will have the least effect on sample size. C) A 10% change in the expected deviation rate will have the least effect on sample size. D) A 10% change in the tolerable will have the least effect on sample size

Answer: A Terms: Attributes sampling Diff: Moderate Objective: LO 15-6 AACSB: Reflective thinking skills

4) In attributes sampling, an estimate of the expected population exception rate is necessary to plan the sample size. The relationship of expected population exception rate (EPER) to sample size is: A) direct (small EPER = small sample). B) inverse (small EPER = large sample). C) a variable (sometimes small, sometimes large) dependent on other factors present. D) indeterminate.

Answer: A Terms: Attributes sampling; Expected population exception rate and sample size Diff: Moderate Objective: LO 15-6 AACSB: Reflective thinking skills

6) For which of the following audit procedures would audit sampling not be appropriate? A) Review sales transactions for large and unusual amounts. B) Examine a sample of duplicate sales invoices for credit approval. C) Compare the quantity on duplicate sales invoices with the quantity on related shipping documents. D) Audit sampling is appropriate for each of the above procedures.

Answer: A Terms: Audit sampling not appropriate for which audit procedure Diff: Moderate Objective: LO 15-5 and LO 15-6 AACSB: Reflective thinking skills

2) When the auditor decides to select less than 100 percent of the population for testing, the auditor is said to use: A) audit sampling. B) representative sampling. C) poor judgment. D) estimation sampling.

Answer: A Terms: Auditor selects less than 100 percent of population for testng Diff: Easy Objective: LO 15-1 AACSB: Reflective thinking skills

4) When the computed upper exception rate is greater than the tolerable exception rate, it is necessary for the auditor to take specific action. Which of the following courses of action would be most difficult to justify? A) Reduce the tolerable exception rate so as to accept the sample results. B) Expand the sample size and perform more tests. C) Revise the assessed control risk. D) Write a letter to management which outlines the control deficiencies.

Answer: A Terms: Computed upper exception rate is greater than tolerable exception rate Diff: Easy Objective: LO 15-5 AACSB: Reflective thinking skills

29) If the result obtained from a particular sample for control and substantive tests of transactions is critical to the formation of an audit opinion, which of the following is the most important to the auditor in concluding of the appropriateness and sufficiency of evidence gathered? A) Acceptable risk of assessing control risk too low. B) Estimated population exception rate. C) Tolerable exception rate. D) Size of the population.

Answer: A Terms: Control and substantive tests of transactions; Important in concluding appropriateness and sufficiency of evidence Diff: Challenging Objective: LO 15-5 AACSB: Reflective thinking skills

11) The auditor's best estimate of the population exception rate is the: A) current year's sample exception rate. B) tolerable exception rate. C) prior year's sample exception rate. D) computed upper exception rate.

Answer: A Terms: Estimate of population exception rate Diff: Moderate Objective: LO 15-5 AACSB: Reflective thinking skills

2) The exception rate the auditor will permit in the population and still be willing to reduce the assessed level of control risk is called the: A) tolerable exception rate. B) estimated population exception rate. C) acceptable risk of overreliance. D) sample exception rate.

Answer: A Terms: Exception rate auditor will permit and still be willing to reduce assessed level of control risk Diff: Easy Objective: LO 15-5 AACSB: Reflective thinking skills

6) An auditor can increase the likelihood that a sample is representative by using care in: A) Designing the sampling process Designing the sample selection Yes Yes B) Designing the sampling process Designing the sample selection No No C) Designing the sampling process Designing the sample selection Yes No D) Designing the sampling process Designing the sample selection No Yes

Answer: A Terms: Increase likelihood that sample is representatigve Diff: Easy Objective: LO 15-1 AACSB: Reflective thinking skills

32) An auditor plans to examine a sample of 40 canceled checks for a countersignature which is prescribed in the client's control procedures manual. Two of the checks in sample cannot be located by the company or the auditor. The auditor would most likely: A) treat the missing checks as a deviation when evaluating the results of the sample. B) draw a conclusion on a sample size of 38. C) substitute two more checks to get to a sample size of 40. D) recalculate the sample excluding the original 40 checks.

Answer: A Terms: Missing canceled checks in population Diff: Moderate Objective: LO 15-4 and LO 15-5 AACSB: Analytic skills

9) Non-probabilistic selection methods are not based on mathematical probabilities; therefore: A) the extent to which a sample is representative of the population may be difficult to determine. B) they are discouraged by the AICPA. C) they are not allowed by the Statements on Auditing Standards. D) they are not as effective as statistical sampling.

Answer: A Terms: Non-probabilistic selection methods Diff: Challenging Objective: LO 15-2 AACSB: Reflective thinking skills

1) Which of the following is not true for nonstatistical sampling? A) applies mathematical rules that allows auditors to quantify sampling risk B) auditors select items for the sample that they believe would provide them the most information C) reach conclusion about the population on a judgmental sample D) often called judgmental sampling

Answer: A Terms: Nonstatistical sampling Diff: Easy Objective: LO 15-2 AACSB: Reflective thinking skills

8) Which of the following is the risk that an auditor will reach an incorrect conclusion because a sample is not representative of the population? A) Sampling risk B) Nonsampling risk C) Audit risk D) Detection risk

Answer: A Terms: Risk auditor will reach an incorrect conclusion Diff: Easy Objective: LO 15-1 AACSB: Reflective thinking skills

1) A sample in which every possible combination of items in the population has an equal chance of constituting the sample is a: A) random sample. B) statistical sample. C) judgment sample. D) representative sample.

Answer: A Terms: Sample in which every possible combination has equal chance of constituting sample Diff: Easy Objective: LO 15-3 AACSB: Reflective thinking skills

13) If an auditor judgmentally selects a sample of one hundred items from a population and finds two exceptions, the auditor: A) can conclude that the sample exception rate is 2%. B) can conclude that the population exception rate is 2%. C) can calculate the highest exception rate expected in the population. D) cannot make any conclusions about either the sample or the population.

Answer: A Terms: Sample selected from population and found exceptions Diff: Moderate Objective: LO 15-5 AACSB: Reflective thinking skills

3) When auditors wish to evaluate a sample statistically, an acceptable selection method is: A) systematic sample selection. B) judgmental selection. C) haphazard selection. D) block sample selection.

Answer: A Terms: Sample statistically Diff: Easy Objective: LO 15-2 AACSB: Reflective thinking skills

26) Whenever auditors use sampling, they risk making incorrect conclusions about the population. For audit sampling of tests of transactions this risk is known as: A) acceptable risk of assessing control risk too low. B) acceptable risk of assessing transaction testing as too low. C) risk that the sample is not representative of the population. D) risk that the sample conclusions cannot be useful because of non-probability sampling.

Answer: A Terms: Sampling and the risk of making incorrect conclusions about the population Diff: Challenging Objective: LO 15-5 AACSB: Reflective thinking skills

23) An auditor uses statistical sampling for attributes in internal control testing. She would most likely reduce the planned reliable on the control tested when: A) the sample deviation rate plus the adjustment for sampling risk exceeded the tolerable deviation rate. B) the sample deviation rate plus the adjustment for sampling risk equaled the tolerable deviation rate. C) the tolerable deviation rate less the adjustment for sampling risk exceeded the expected population deviation rate. D) the tolerable deviation rate plus the adjustment for sampling risk was less than the expected population deviation rate.

Answer: A Terms: Statistical sampling for attributes; Reduce planned reliance on control tested Diff: Moderate Objective: LO 15-5 AACSB: Reflective thinking skills

3) In systematic sample selection, the population size is divided by the number of sample items desired in order to determine the: A) sampling interval. B) tolerable exception rate. C) computed upper exceptions rate. D) mean.

Answer: A Terms: Systematic sample selection Diff: Easy Objective: LO 15-3 AACSB: Reflective thinking skills

6) Which of the following represents the best description of the tolerable exception? A) The highest exception rate the auditor will permit in the control being tested and still conclude it is operating effectively. B) The highest exception rate the auditor expects to find in the population. C) The number of exceptions found in the sample divided by the sample size. D) The highest estimated exception rate in a population at a given ARACR.

Answer: A Terms: Tolerable exception rate Diff: Moderate Objective: LO 15-5 AACSB: Reflective thinking skills

3) When audit procedures have been completed for an attributes sampling application, the auditor must generalize from the sample to the population. Which of the following statements would be incorrect regarding this process? A) The auditor would use an attributes sampling table to determine the computed upper exception rate. B) The computed upper exception rate is the highest exception rate in the population that the auditor is willing to accept. C) It would be wrong for the auditor to conclude that the population exception rate is exactly the same as the sample exception rate. D) In selecting the table corresponding to the risk of overreliance, it should be the same as the ARACR used for determining the initial sample size.

Answer: B Terms: Attributes sampling application Diff: Challenging Objective: LO 15-7 AACSB: Reflective thinking skills

7) Which of the following is most correct when using audit sampling for exception rates? A) auditor is concerned with the lowest rate B) auditor is concerned with the highest rate C) auditor is concerned with the average on previous audits D) doesn't impact the auditors decision

Answer: B Terms: Auditing sampling for exception rates Diff: Moderate Objective: LO 15-5 AACSB: Reflective thinking skills

5) Which one of the choices below is most correct regarding a cause of sampling risk? A) ineffective use of audit procedures B) testing less than the entire population C) use of extensive tests of controls D) the possibility that a properly-selected sample still may not be representative

Answer: B Terms: Correct regarding sampling risk Diff: Easy Objective: LO 15-1 AACSB: Reflective thinking skills

5) Correspondence is established between the random number table and the population by: A) identifying each item in the population with a unique number. B) deciding the number of digits to use in the random number table and their association with the population numbering system. C) defining which digits the auditor uses in a column and the method of reading the table. D) selecting a random starting point on the table.

Answer: B Terms: Correspondence between random number table and population Diff: Moderate Objective: LO 15-3 AACSB: Reflective thinking skills

16) Which of the following is the exception rate that the auditor expects to find before testing? A) Sample exception rate. B) Estimated population exception rate. C) Computed exception rate. D) Tolerable exception rate.

Answer: B Terms: Exception rate auditor expects to find before testing Diff: Moderate Objective: LO 15-5 AACSB: Reflective thinking skills

4) Which of the following methods of sample selection is appropriately used when selecting a random sample? A) Auditor's judgmental selection of items Use of computer-generated random numbers Use of random number ables Yes No Yes B) Auditor's judgmental selection of items Use of computer-generated random numbers Use of random number ables No Yes Yes C) Auditor's judgmental selection of items Use of computer-generated random numbers Use of random number ables Yes No No D) Auditor's judgmental selection of items Use of computer-generated random numbers Use of random number ables No Yes No

Answer: B Terms: Methods of sample selection in selecting a random sampl Diff: Moderate Objective: LO 15-3 AACSB: Reflective thinking skills

2) When the auditor goes through a population and selects items using nonprobalistic selection methods, without regard to their size, source, or other distinguishing characteristics, it is called: A) block sample selection. B) haphazard selection. C) systematic sample selection. D) statistical selection.

Answer: B Terms: Nonprobabilistic selection methods Diff: Easy Objective: LO 15-2 AACSB: Reflective thinking skills

8) Which of the following statements is not correct regarding probabilistic and non-probabilistic sample selection? A) In probabilistic selection, every population item has a known chance of being selected. B) It is not acceptable to make non-probabilistic evaluations using probabilistic selection. C) Probabilistic selection is required for all statistical sampling methods. D) Both methods are acceptable and commonly used.

Answer: B Terms: Probabilistic and non-probabilistic sample selection Diff: Challenging Objective: LO 15-2 AACSB: Reflective thinking skills

6) Which of the following statements is not correct? A) It is acceptable to pick a starting point on a random number table by using a "blind stab" method. B) It is impossible to draw a six-digit random number from a table that is separated into columns of five digits. C) The only reason for selecting a random starting point on a random number table is to eliminate the predictability of the sample. D) When selecting a three-digit number from a table that is separated into columns of five digits, it is permissible to use the first three digits, the middle three digits, or the last three digits.

Answer: B Terms: Random number tables Diff: Moderate Objective: LO 15-3 AACSB: Reflective thinking skills

18) The relationship of tolerable exception rate (TER) to sample size is: A) direct (larger TER = larger sample). B) inverse (larger TER = smaller sample). C) variable (sometimes larger, sometimes smaller). D) not determinable.

Answer: B Terms: Relationship of tolerable exception rate (TER) to sample size Diff: Moderate Objective: LO 15-5 AACSB: Reflective thinking skills

31) Which of the following results in a larger sample size? A) decrease the desired confidence level and decrease the tolerable deviation rate B) increase the desired confidence level and decrease the tolerable deviation rate C) decrease the desired confidence level and increase the tolerable deviation rate D) increase the desired confidence level and increase the tolerable deviation rate

Answer: B Terms: Results in larger sample size Diff: Moderate Objective: LO 15-1 and LO 15-5 AACSB: Reflective thinking skills

7) Which of the following is the risk that audit tests will not uncover existing exceptions in a sample? A) Sampling risk B) Nonsampling risk C) Audit risk D) Detection risk

Answer: B Terms: Risk that audit tests will not uncover existing exceptions Diff: Easy Objective: LO 15-1 AACSB: Reflective thinking skills

1) A sample in which the characteristics of the sample are the same as those of the population is a(n): A) variables sample. B) representative sample. C) attributes sample. D) random sample.

Answer: B Terms: Sample in which characteristics of sample are same as population Diff: Easy Objective: LO 15-1 AACSB: Reflective thinking skills

4) What is an auditor's evaluation of a statistical sample for attributes when a test of 100 documents results in four exceptions if the tolerable exception rate is 5%, the expected population exception rate is 3%, and the allowance for sampling risk is 2%? A) Accept the sample results as support for planned reliance on the control because the tolerable rate less the allowance for sampling risk equals the expected population exception rate. B) Modify planned reliance on the control because the sample exception rate plus the allowance for sampling risk exceeds the tolerable rate. C) Modify planned reliance on the control because the tolerable rate plus the allowance for sampling risk exceeds the expected population exception rate. D) Accept the sample results as support for planned reliance on the control because the sample deviation rate plus the allowance for sampling risk exceeds the tolerable rate.

Answer: B Terms: Statistical sample for attributes; Tolerable exception rate, expected population exception rate and allowance for sampling risk Diff: Challenging Objective: LO 15-7 AACSB: Reflective thinking skills

25) When using statistical sampling, the auditor would most likely require a smaller sample if the: A) population increases. B) desired reliability decreases. C) desired precision interval narrows. D) expected exception rate increases.

Answer: B Terms: Statistical sampling; Auditor requires smaller sample Diff: Moderate Objective: LO 15-5 AACSB: Reflective thinking skills

5) If an auditor, planning to use statistical sampling, is concerned with the number of a client's sales invoices that contain mathematical errors, the auditor would most likely utilize which sampling technique? A) Random sampling with replacement B) Sampling for attributes C) Ssampling for variables D) Stratified random sampling

Answer: B Terms: Statistical sampling; Number of invoices containing mathematical errors Diff: Challenging Objective: LO 15-6 AACSB: Reflective thinking skills

17) Which of the following is not a term related to evaluating results in audit sampling until after a sample is tested and evaluated? A) Sample exception rate. B) Estimated population exception rate. C) Computed upper exception rate. D) Exception.

Answer: B Terms: Term not related to evaluating results in audit sampling Diff: Moderate Objective: LO 15-5 AACSB: Reflective thinking skills

14) In testing controls, an overreliance on internal controls that reduces substantive tests and increases the likelihood of not detecting a material misstatement occurs because: A) true deviation in the population was less than the sample. B) true deviation in the population was greater than the sample. C) auditor judgment was flawed. D) it is inherent in the audit risk model.

Answer: B Terms: Testing controls; Overreliance on internal controls Diff: Moderate Objective: LO 15-5 AACSB: Reflective thinking skills

30) The tolerable rate of exceptions for tests of controls is generally: A) lower than the expected rate of errors in the related accounting records. B) higher than the expected rate of errors in the related accounting records. C) identical to the expected rate of errors in the related accounting records. D) unrelated to the expected rate of errors in the related accounting records.

Answer: B Terms: Tolerable rate of exceptions for tests of controls Diff: Challenging Objective: LO 15-5 AACSB: Reflective thinking skills

1) Which of the following occurrences would be least likely to warrant further audit attention for the auditor? A) Deviations from client's established control procedures. B) Deviations from client's budgeted values. C) Monetary misstatements in populations of transaction data. D) Monetary misstatements in populations of account balance details.

Answer: B Terms: Warrant further audit attention for auditor Diff: Easy Objective: LO 15-4 AACSB: Reflective thinking skills

4) One of the ways to eliminate nonsampling risk is through: A) proper supervision and instruction of the client's employees. B) proper supervision and instruction of the audit team. C) the use of attributes sampling rather than variables sampling. D) controls which ensure that the sample drawn is random and representative.

Answer: B Terms: Ways to eliminate nonsampling risk Diff: Easy Objective: LO 15-1 AACSB: Reflective thinking skills

2) Attributes sampling would be an appropriate method to use on which one of the following procedures in an audit program? A) Review sales transactions for large and unreasonable amounts. B) Observe whether the duties of the accounts receivable clerk are separate from handling cash. C) Examine a sample of duplicate sales invoices for credit approval by the credit manager. D) Review the aged schedule of accounts receivable to determine if receivables from officers are included.

Answer: C Terms: Attributes sampling Diff: Easy Objective: LO 15-6 AACSB: Reflective thinking skills

12) Place the following steps in their proper order: 1. Analyze exceptions 2. Select the sample 3. Define attributes and exception conditions 4. State the objectives of the audit test 5. Specify the tolerable exception rate A) 1, 3, 2, 4, 5. B) 4, 3, 1, 2, 5. C) 4, 3, 5, 2, 1. D) 1, 2, 3, 4, 5.

Answer: C Terms: Auditing sampling steps Diff: Moderate Objective: LO 15-5 AACSB: Reflective thinking skills

10) Which of the following statements regarding block sampling is least likely to be true? A) Block sampling is the selection of several items in sequence. B) It is acceptable to use block sampling for tests of transactions only if a reasonable number of blocks is used. C) Only one block should be selected to increase the probability of a representative sample. D) Once the first item in the block is selected, the remainder of the block is chosen automatically.

Answer: C Terms: Block sampling Diff: Challenging Objective: LO 15-2 AACSB: Reflective thinking skills

28) The difference between the tolerable exception rate and the estimated population exception rate is called: A) accuracy of the initial sample estimate. B) inflation factor of the initial sample estimate. C) precision of the initial sample estimate. D) reliability of the initial sample estimate.

Answer: C Terms: Difference between tolerable exception and estimated population exception rate Diff: Challenging Objective: LO 15-5 AACSB: Reflective thinking skills

8) In performing a review of a client's cash disbursements, an auditor uses systematic sample selection with a random start. The primary disadvantage of this technique is population items: A) may occur twice in the sample. B) must be reordered in a systematic pattern before the sample can be drawn. C) may occur in a systematic pattern, thus negating the randomness of the sample. D) must be replaced in the population after sampling to permit valid statistical inference.

Answer: C Terms: Disadvantage of systematic sample selection with random start Diff: Moderate Objective: LO 15-3 AACSB: Reflective thinking skills

6) Which of the following statements is most correct with respect to the evaluation of non-probabilistic sample results? A) It is acceptable to make non-probabilistic evaluations only when probabilistic sample selection is used. B) It is acceptable to make non-probabilistic evaluations only if the auditor cannot quantify sampling risk. C) It is never acceptable to evaluate a non-probabilistic sample using statistical methods. D) All of the above are correct.

Answer: C Terms: Evaluation of non-probabilistic sample results Diff: Moderate Objective: LO 15-2 AACSB: Reflective thinking skills

8) The highest estimated exception rate in the population at a particular acceptable risk of assessing control risk too low is: A) the upper exception rate. B) estimated population exception rate. C) the computed upper exception rate. D) the tolerable exception rate.

Answer: C Terms: Highest estimated exception rate in population; Acceptable risk of assessing control risk too low Diff: Moderate Objective: LO 15-5 AACSB: Reflective thinking skills

22) Before the population can be considered acceptable based on the acceptable risk of assessing control risk too low, the computed upper exception rate must be: A) greater than or equal to the tolerable exception rate. B) greater than the tolerable exception rate. C) less than or equal to the tolerable exception rate. D) less than the tolerable exception rate.

Answer: C Terms: Population considered acceptable based on acceptable risk of assessing control risk too low; Upper exception rate Diff: Moderate Objective: LO 15-5 AACSB: Reflective thinking skills

2) The process which requires the calculation of an interval and then selects the items based on the size of the interval is: A) statistical sampling. B) random sample selection. C) systematic sample selection. D) computerized sample selection.

Answer: C Terms: Process which requires calculation of an interval Diff: Easy Objective: LO 15-3 AACSB: Reflective thinking skills

4) Which of the following statement is most correct with concerning the quantification of sampling risk? A) Sampling risk cannot be quantified. B) Sampling risk can be quantified only when non-probabilistic selection techniques are used to select the sample. C) Sampling risk can be quantified only when probabilistic selection techniques are used to select the sample. D) None of the above.

Answer: C Terms: Quantification of sampling risk Diff: Easy Objective: LO 15-2 AACSB: Reflective thinking skills

20) The relationship of acceptable risk of accessing control risk too low (ARACR) to sample size is: A) variable (sometimes larger, sometimes smaller). B) direct (larger ARACR = larger sample). C) inverse (larger ARACR = smaller sample). D) nonexistent.

Answer: C Terms: Relationship of acceptable risk of assessing control risk too low (ARACR) to sample size Diff: Moderate Objective: LO 15-5 AACSB: Reflective thinking skills

1) The risk which the auditor is willing to take in accepting a control as being effective when the true population exception rate is greater than a tolerable rate is the: A) finite correction factor. B) tolerable exception rate. C) acceptable risk of assessing control risk too low. D) estimated population exception rate.

Answer: C Terms: Risk auditor is willing to take in accepting a control as being effective Diff: Easy Objective: LO 15-5 AACSB: Reflective thinking skills

21) The sample exception rate equals: A) the number of exceptions in the population divided by the sample size. B) the number of items in the population multiplied by the number of exceptions in the sample. C) the number of exceptions in the sample divided by the sample size. D) the number of exceptions in the population divided by the population size.

Answer: C Terms: Sample exception rate Diff: Moderate Objective: LO 15-5 AACSB: Reflective thinking skills

3) To determine if a sample is truly representative of the population, an auditor would be required to: A) conduct multiple samples of the same population. B) never use sampling because of the expense involved. C) audit the entire population. D) use systematic sample selection.

Answer: C Terms: Sample truly representative of population Diff: Easy Objective: LO 15-1 AACSB: Reflective thinking skills

9) Sampling risk may be controlled by: A) Adjusting the sample size Always using random sampling Yes Yes B) Adjusting the sample size Always using random sampling No No C) Adjusting the sample size Always using random sampling Yes No D) Adjusting the sample size Always using random sampling No Yes

Answer: C Terms: Sampling risk controlled by Diff: Easy Objective: LO 15-1 AACSB: Reflective thinking skills

6) If the size of the sample to be used in a test of attributes is not determined by using statistical concepts, but the sample is chosen in accordance with random selection procedures: A) no inferences can be drawn from the sample. B) the auditor has committed a nonsampling error. C) the auditor may or may not achieve the tolerable exception rate at the acceptable risk of assessing control risk too low. D) the auditor will have to evaluate results using the principles of discovery sampling.

Answer: C Terms: Size of sample used in test of attributes Diff: Challenging Objective: LO 15-7 AACSB: Reflective thinking skills

24) The acceptable risk of assessing control risk too low is: A) The risk that the auditor is willing to take of accepting a control as ineffective when it is effective The risk that the auditor is willing to take of accepting a control as effective when it is ineffective Yes Yes B) The risk that the auditor is willing to take of accepting a control as ineffective when it is effective The risk that the auditor is willing to take of accepting a control as effective when it is ineffective No No C) The risk that the auditor is willing to take of accepting a control as ineffective when it is effective The risk that the auditor is willing to take of accepting a control as effective when it is ineffective Yes No D) The risk that the auditor is willing to take of accepting a control as ineffective when it is effective The risk that the auditor is willing to take of accepting a control as effective when it is ineffective No Yes

Answer: D Terms: Acceptable risk of assessing control risk too low Diff: Moderate Objective: LO 15-5 AACSB: Reflective thinking skills

1) A principal advantage of statistical methods of attributes sampling over nonstatistical methods is that they provide a scientific basis for establishing the: A) risk of assessing control risk too low. B) tolerable exception rate. C) expected population exception rate. D) sample size.

Answer: D Terms: Advantage of statistical methods of attributes sampling Diff: Moderate Objective: LO 15-7 AACSB: Reflective thinking skills

9) Which of the following is an advantage of systematic sample selection over random number sampling? A) It provides a stronger basis for statistical conclusions. B) It enables the auditor to use the more efficient "sampling with replacement" tables. C) There may be correlation between the location of items in the population, the feature of sampling interest, and the sampling interval. D) It does not require establishment of correspondence between random numbers and items in the population.

Answer: D Terms: Advantage of systematic sample selection over random number sampling Diff: Challenging Objective: LO 15-3 AACSB: Reflective thinking skills

Topic: Public 1) Rodgers CPA believes that the rate of client billing errors is 4% and has established a tolerable deviation rate of 6%. In auditing client invoices Rodgers should use: A) stratified sampling. B) classical sampling. C) proportional sampling. D) attributes sampling.

Answer: D Terms: Auditing client invoices Diff: Easy Objective: LO 15-6 AACSB: Analytic skills

5) The auditor may use which of the following criteria when using the directed sample selection technique? A) Items most likely to contain misstatements. B) Items containing selected population characteristics. C) Large dollar coverage. D) Any of the above.

Answer: D Terms: Criteria with directed sample selection technique Diff: Easy Objective: LO 15-2 AACSB: Reflective thinking skills

7) Which of the following statements is a valid criticism of non-statistical sampling? A) Many audit tests, such as footing of journals, must be performed outside a statistical sampling context. B) The cost of performing random selection or testing often exceeds the benefits. C) Non-statistical sampling does not differ substantially from statistical sampling methods. D) Conclusions may be drawn in more precise ways when using statistical sampling methods.

Answer: D Terms: Criticism of non-statistical sampling Diff: Moderate Objective: LO 15-2 AACSB: Reflective thinking skills

2) In using sampling distribution for attributes, which one of the following must be known to evaluate the sample results? A) Estimated dollar value of the population. B) Standard exception of the values in the population. C) Actual exception rate of the attribute in the population. D) Sample size.

Answer: D Terms: Estimation sampling for attributes Diff: Moderate Objective: LO 15-7 AACSB: Reflective thinking skills

10) The exception rate that the auditor will permit in the population and still be willing to use the preliminary control risk assessment is called the: A) acceptable exception rate. B) estimated population exception rate. C) sample exception rate. D) tolerable exception rate.

Answer: D Terms: Exception rate; Preliminary control risk assessment Diff: Moderate Objective: LO 15-5 AACSB: Reflective thinking skills

5) Which of the following would have the least impact in determining sample size for tests of controls? A) Expected population exception rate. B) Risk of assessing control risk too low. C) Tolerable exception rate. D) Population size.

Answer: D Terms: Least impact on determining sample size for tests of controls Diff: Easy Objective: LO 15-5 AACSB: Reflective thinking skills

15) You are determining the significance of the following: you set a 5% risk of assessing control risk to low and your computation of the upper deviation risk is 7%. What could you conclude? A) There is a 95% chance the deviation rate is the population is less than 5%. B) There is a 5% chance the deviation rate in the population is less than 7%. C) There is a 95% chance the deviation rate in the population exceeds 95%. D) There is a 5% chance the deviation rate in the population exceeds 7%.

Answer: D Terms: Risk of assessing control risk low and computation of upper deviation risk Diff: Moderate Objective: LO 15-5 AACSB: Reflective thinking skills

10) Which of the following statements is most correct? A) A sample of all items of a population will eliminate sampling risk, but increase nonsampling risk. B) The use of an appropriate sample selection technique ensures a representative sample. C) The auditor's failure to recognize an exception is a significant cause of sampling risk. D) The use of inappropriate audit procedures is a significant cause of nonsampling risk.

Answer: D Terms: Sample selection; Sampling and nonsampling risk Diff: Easy Objective: LO 15-1 AACSB: Reflective thinking skills

9) You are testing controls over accounts receivable and are determining if the appropriate credit authorization was made by an authorized person. Your sample size is 40 and your computed upper deviation rate is 5%. On the first 10 items sampled you have found 8 deviations. You would most likely: A) continue with the other 30 items. B) revisit the sample size calculations. C) increase the tolerable deviation rate. D) stop the test and re-set control risk for accounts receivable.

Answer: D Terms: Sample size, computed upper deviation and actual deviations Diff: Moderate Objective: LO 15-5 AACSB: Analytic skills

19) Which of the following must be set prior to testing a sample? A) Sample exception rate. B) Achieved upper precision limit. C) Computed exception rate. D) Tolerable exception rate.

Answer: D Terms: Set prior to testing sample Diff: Moderate Objective: LO 15-5 AACSB: Reflective thinking skills

11) Which of the following statements best expresses the impact that the performance of audit procedures has on statistical vs. nonstatistical sampling? A) Audit procedures on the sample item will vary as a result of using either statistical or nonstatistical sampling. B) The audit procedures will be the same for either statistical or nonstatistical sampling but they must be performed differently for each. C) Statistical sampling requires quantitative audit procedures, whereas nonstatistical sampling requires judgmental audit procedures. D) Audit procedures on the sample item will not vary as a result of using either statistical or nonstatistical sampling.

Answer: D Terms: Statistical vs. nonstatistical sampling Diff: Challenging Objective: LO 15-1 AACSB: Reflective thinking skills


Ensembles d'études connexes

population health exam 2 (evolve)

View Set

Segundo Parcial- Administración de Desarrollo

View Set

Econ: the federal reserve system 15-1

View Set

Part C - Uninsured Motorists (UM)

View Set

Risk Management and Insurance Topic Test (92%)

View Set