CH 22 Machining Operations and Machine

Réussis tes devoirs et examens dès maintenant avec Quizwiz!

A lathe can be used to perform which of the following machining operations (three correct answers): (a) boring, (b) broaching, (c) drilling, (d) milling, (e) planing, and (f) turning?

(a) boring (c) drilling (f) turning

Which one of the following cutting tools cannot be used on a turret lathe: (a) broach, (b) cutoff tool, (c) drill bit, (d) single-point turning tool, or (e) threading tool?

(a) broach

End milling is most similar to which one of the following: (a) face milling, (b) peripheral milling, (c) plain milling, or (d) slab milling?

(a) face milling

The twist drill is the most common type of drill bit: (a) true or (b) false?

(a) true

Knurling is performed on a lathe, but it is not a metal cutting operation: (a) true or (b) false?

(a) true, It is a metal forming operation.

In a turning operation, the change in diameter of the workpart is equal to which one of the following: (a) 1 x depth of cut, (b) 2 x depth of cut, (c) 1 x feed, or (d) 2 x feed?

(b) 2 x depth of cut

A broaching operation is best described by which one of the following: (a) a rotating tool moves past a stationary workpart, (b) a tool with multiple teeth moves linearly past a stationary workpart, (c) a workpart is fed past a rotating cutting tool, or (d) a workpart moves linearly past a stationary single-point tool?

(b) a tool with multiple teeth moves linearly past a stationary workpart

The three basic types of sawing, according to type of blade motion involved, are (a) abrasive cutoff, (b) bandsawing, (c) circular sawing, (d) contouring, (e) friction sawing, (f) hacksawing, and (g) slotting?

(b) bandsawing (c) circular sawing (f) hacksawing

Which of the following are examples of generating the workpart geometry in machining, as opposed to forming the geometry (two best answers): (a) broaching, (b) contour turning, (c) drilling, (d) profile milling, and (e) thread cutting?

(b) contour turning (d) profile milling

Reaming is used for which of the following functions (three correct answers): (a) accurately locate a hole position, (b) enlarge a drilled hole, (c) improve surface finish on a hole, (d) improve tolerance on hole diameter, and (e) provide an internal thread?

(b) enlarge a drilled hole (c) improve surface finish on a hole (d) improve tolerance on hole diameter

The basic milling machine is which one of the following: (a) bed type, (b) knee-and-column, (c) profiling mill, (d) ram mill, or (e) universal milling machine?

(b) knee-and-column

A facing operation is normally performed on which one of the following machine tools: (a) drill press, (b) lathe, (c) milling machine, (d) planer, or (e) shaper?

(b) lathe

Gear hobbing is a special form of which one of the following machining operations: (a) grinding, (b) milling, (c) planing, (d) shaping, or (e) turning?

(b) milling

Which one of the following turning machines permits very long bar stock to be used: (a) chucking machine, (b) engine lathe, (c) screw machine, (d) speed lathe, or (e) turret lathe?

(c) screw machine

A planing operation is best described by which one of the following: (a) a single-point tool moves linearly past a stationary workpart, (b) a tool with multiple teeth moves linearly past a stationary workpart, (c) a workpart is fed linearly past a rotating cutting tool, or (d) a workpart moves linearly past a single-point tool?

(d) a workpart moves linearly past a single-point tool

A tap is a cutting tool used to create which one of the following geometries: (a) external threads, (b) flat planar surfaces, (c) holes used in beer kegs, (d) internal threads, or (e) square holes?

(d) internal threads


Ensembles d'études connexes

Marketing Management Test 1 (CH 1)

View Set

16:6 Measuring and recording Apical pulse

View Set

Y7 Concordancia: Frutas con colores y sabores

View Set

Oceanography Chapter 7 and 8 Alec Gatewood

View Set

Chapter 10: Purchasing and Financing a Home Part 1

View Set

Intermediate Accounting III - D105 accounting for Leases

View Set

Chapter 1: what is good customer service

View Set