Chapter 3
Which of the following is not a task handled by a router?
A router forwards broadcasts over the network.
By default, the pathping command sends how many pings per hop?
100
Autonomous System Number (ASN) consists of _____ bits.
32
A router that directs data between networks within the same autonomous system.
gateway router
A _______ joins two or more networks and passes packets from one network to another.
router
A routing protocol's reliability and priority are rated by what measurement?
AD (Administrative Distance)
Which network routing protocol is a path vector protocol that sends updates between routers using TCP?
BGP (Border Gateway Protocol)
What field in a TCP segment is used to determine if an arriving data unit exactly matches the data unit sent by the source?
Checksum
List three characteristics of TCP in its role as a reliable delivery protocol
Connection-oriented Protocol, Sequencing and checksums, and flow control
What field in an IPv4 packet informs routers the level of precedence they should apply when processing an incoming packet?
Differentiated Services (DiffServ)
Describe dynamic ARP table entries.
Dynamic ARP table entries are created when a client makes an ARP request that could not be satisfied by data already in the ARP table.
What is the difference between static and dynamic routing?
Dynamic Routing- Automatically calculates the best patch between two networks and accumulates this information in the routing table Static Routing- Is a technique in which a network admin configures a routing table to direct messages along specific paths between networks.
What is NOT one of the three characteristics of TCP in its role as a reliable delivery protocol?
Framing
Examples of routing metrics used by routers to determine the best of various available routing paths.
Hop count, latency, and routing cost
What protocol replaces ARP, IGMP, and ICMPv4 on IPv6 based networks?
ICMPv6
What IPv4 protocol handles multicasting for tasks such as videoconferencing or teleconferencing?
IGMP
Which two protocols are essential to IPv4 networks, but whose functions are performed by ICMPv6 on IPv6 networks?
IGMP (Internet Group Management Protocol) and ARP (Address Resolution Protocol)
Which has better security, IPv4 or IPv6, and why?
IPv6, because it has built in security
Direct data between networks within the same autonomous system.
Interior Router
Which layers of the OSI model are all routers able to interpret?
Layer 3 and 4
At what layer of the OSI model would a TCP or UDP header be added to a payload?
Layer 4
The largest IP packet size in bytes allowable by routers in a path without fragmentation and excluding the frame size.
MTU (maximum transmission unit)
What number does a host use to identify the application involved in a transmission?
Port number
In a TCP segment, what field indicates how many bytes the sender can issue to a receiver while acknowledgement for the segment is outstanding?
Sliding window
Manually modifying a routing table can cause messages to get stuck hopping between a limited number of routers. What is this problem called?
routing loop
What database does a router consult before determining the most efficient path for delivering a message?
routing table
What command can be used on a Cisco router to view the routing table?
show ip route
A number indicating a protocol's reliability, with lower values being given higher priority. This assignment can be changed by a network administrator when one protocol should take precedence over a previously higher-rated protocol on a network.
AD (administrative distance)
A globally unique number that identifies an autonomous system. ASNs work similarly to IP addresses that identify individual nodes on a network. Each ASN now consists of 32 bits instead of 16 bits, and they are assigned by IANA.
Autonomous system number
List three interior gateway protocols (IGPs).
RIP, RIPv2, OSPF
Describe static ARP table entries.
Static ARP table entries are those that someone has entered manually using the ARP utility.
Which of the following are types of entries an ARP table contains?
Static and Dynamic
What kind of route is created when a network administrator configures a router to use a specific path between nodes?
Static route
The IP connection-less protocol relies on what other protocol to guarantee delivery of data?
TCP
Direct data between autonomous systems.
Exterior Router
True or False: UDP provides error checking, but not sequencing.
False
True or false: UDP provides error checking, but not sequencing.
False
What four functions do all routers perform?
connect different LAN's, find best route, select alternative route if one is down, and interpret layer 3 and 4 addressing and other information
What routing protocol criteria is defined as the time it takes to recognize a best path change in the event of a network outage?
convergence time
At which OSI layer do routers operate?
Network layer (layer 3)
At which OSI layer does IP operate?
Network layer (layer 3)
Which OSI layer is responsible for directing data from one LAN to another?
Network layer (layer 3)
A router that directs data between networks within the same autonomous system.
gateway router
A router that connects an autonomous system with an outside network—for example, the router that connects a business to its ISP.
interior router
The delay between the transmission of a signal and its receipt.
latency
What kind of web site allows you to remotely collect network routing information back to your actual location?
looking glass sites
When messages to a remote Web server are being lost for no apparent reason and you suspect the problem might be a path MTU black hole, which TCP/IP utility can you use to diagnose the problem?
ping
A repeated trial message transmitted by the tracert and traceroute utilities to trigger routers along a route to return specific information about the route.
probe
Properties of a route used by routing protocols to determine the best path to a destination when various paths are available. Routing metrics may be calculated using any of several variables, including hop count, bandwidth, delay, MTU, cost, and reliability.
routing metric
What process is used to establish a TCP connection?
Three-way handshake
Connect an autonomous system with an outside network.
Border Router
Which protocol's header would a Layer 4 device read and process?
TCP
This netstat command option lists only current connections, including IP addresses and port numbers.
-n
Which of the following is not a task handled by a router? A. A router forwards broadcasts over the network. B. A router can reroute traffic if the path of first choice is down but a second path is available. C. A router can interpret Layer 3 and often Layer 4 addressing. D. A router can connect dissimilar networks.
A
Which routing protocol does an exterior router use to collect data to build its routing tables?
BGP (Border Gateway Protocol)
What TCP field below allows the receiving node to determine whether a TCP segment is corrupted during transmission?
Checksum
When a router can't determine a path to a message's destination, where does it send the message?
Default route
The TCP ___________________ is performed before TCP transmits the actual data.
Three-way handshake
True or False: On IPv4 networks, IGMP operates at the Network layer of the OSI model to manage multicasting.
True
True or false: IP is an unreliable, connection-less protocol.
True
True or false: On IPv4 networks, IGMP operates at the Network layer of the OSI model to manage multicasting.
True
___'s lack of sophistication makes it more efficient than TCP.
UDP