Chapter 9

A 14-kg beam is hinged at one end. A 6.0-kg triangular object and a 7.5-kg I-shaped object are positioned as shown. Dots indicate the individual centers of gravity of the beam and the two objects. What is the distance from the axis of rotation to the center of gravity for this system? A) 1.3 m B) 1.1 m C) 0.96 m D) 0.89 m E) 0.71 m

A) 1.3 m

A 45-N brick is suspended by a light string from a 2.0-kg pulley. The brick is released from rest and falls to the floor below as the pulley rotates through 5.0 rad. The pulley may be considered a solid disk of radius 1.5 m. What is the angular speed of the pulley? A) 17 rad/s B) 15 rad/s C) 9.4 rad/s D) 8.1 rad/s E) 7.3 rad/s

A) 17 rad/s

A 2.0-kg solid cylinder of radius 0.5 m rotates at a rate of 40 rad/s about its cylindrical axis. What power is required to bring the cylinder to rest in 10 s? A) 20 W B) 40 W C) 160 W D) 200 W E) 400 W

A) 20 W

A 2.0-kg hoop rolls without slipping on a horizontal surface so that its center proceeds to the right with a constant linear speed of 6.0 m/s. Which one of the following statements is true concerning the angular momentum of this hoop? A) It points into the paper. B) It points out of the paper. C) It points to the left. D) It points to the right. E) It varies from point to point on the hoop.

A) It points into the paper.

Two uniform solid spheres, A and B have the same mass. The radius of sphere B is twice that of sphere A. The axis of rotation passes through each sphere. Which one of the following statements concerning the moments of inertia of these spheres is true? A) The moment of inertia of A is one-fourth that of B. B) The moment of inertia of A is one-half that of B. C) The moment of inertia of A is 5/4 that of B. D) The moment of inertia of A is 5/2 that of B. E) The two spheres have equal moments of inertia.

A) The moment of inertia of A is one-fourth that of B.

A solid sphere and a hollow sphere each of mass M and radius R are released at the same time from the top of an inclined plane. Which one of the following statements is necessarily true? A) The solid sphere will reach the bottom first. B) The hollow sphere will reach the bottom first. C) Both spheres will reach the bottom at the same time. D) The solid sphere will reach the bottom with the greater kinetic energy. E) The hollow sphere will reach the bottom with the greater kinetic energy.

A) The solid sphere will reach the bottom first.

Three objects are positioned along the x axis as follows: 4.4 kg at x = + 1.1 m, 3.7 kg at x = -0.80 m, and 2.9 kg at x = -1.6 m. The acceleration due to gravity is the same everywhere. What is the distance from the location of the center of gravity to the location of the center of mass for this system?A) zero meters B) -0.52 m C) -0.26 m D) +0.26 m E) +0.52 m

A) zero meters

A wrench is used to tighten a nut as shown in the figure. A 12-N force is applied 7.0 cm from the axis of rotation. What is the magnitude of the torque due to the applied force? A) 0.58 N × m B) 0.84 N × m C) 1.71 N × m D) 14 N × m E) 58 N × m

B) 0.84 N × m

A steady horizontal force of magnitude 21 N is applied at the axle of a solid disk as shown. The disk has mass 2.0 kg and diameter 0.10 m. What is the linear speed of the center of the disk after it has moved 12 m? A) 9.0 m/s B) 13 m/s C) 16 m/s D) 22 m/s E) 44 m/s

B) 13 m/s

A solid cylinder of radius 0.35 m is released from rest from a height of 1.8 m and rolls down the incline as shown. What is the angular speed of the cylinder when it reaches the horizontal surface? A) 8.2 rad/s B) 14 rad/s C) 34 rad/s D) 67 rad/s E) This cannot be determined because the mass is unknown.

B) 14 rad/s

A string is wrapped around a pulley of radius 0.20 m and moment of inertia 0.40 kg × m . The string is pulled with a force of 28 N. What is the magnitude of the resulting angular acceleration of the pulley? A) 22 rad/s2 B) 14 rad/s2 C) 68 rad/s2 D) 0.55 rad/s2 E) 8.0 rad/s2

B) 14 rad/s2

A certain merry-go-round is accelerated uniformly from rest and attains an angular speed of 1.2 rad/s in the first 18 seconds.If the net applied torque is 1200 N × m, what is the moment of inertia of the merry-go-round? A) 1400kg×m2 B) 18000kg×m2 C) 9000kg×m2 D) 500kg×m2 E) This cannot be determined since the radius is not specified.

B) 18000kg×m2

An 80-kg man balances the boy on a teeter-totter as shown. Note: Ignore the weight of the board. 11. What is the approximate mass of the boy? A) 10 kg B) 20 kg C) 40 kg D) 45 kg E) 50 kg

B) 20 kg

One end of a rope is tied to the handle of a horizontally-oriented and uniform door. A force is applied to the other end of the rope as shown in the drawing. The door has a weight of 145 N and is hinged on the right. What is the maximum magnitude of for which the door will remain at rest? A) 145 N B) 265 N C) 381 N D) 424 N E) 530 N

B) 265 N

A string is tied to a doorknob 0.72 m from the hinge as illustrated in the figure. At the instant shown, the force applied to the string is 5.0 N. What is the magnitude of the torque on the door? A) 2.1 N × m B) 3.0 N × m C) 1.0 N × m D) 0.78 N × m E) 0.60 N x m

B) 3.0 N × m

Three children are pulling on a rotatable platform on a playground. The platform has a radius of 3.80 m. In the picture, two children are pulling with equal forces of 40.0 N in an attempt to make the platform rotate clockwise. The third child applies a force of 60 N as shown. What is the net torque on the platform? Note: "ccw" is counterclockwise and "cw" is clockwise. A) 76N×m,ccw B) 76N×m,cw C) 290N×m,ccw D) 290N×m,cw E) 0 N × m

B) 76N×m,cw

A 4.0-kg ball moves in a straight line at 8.0 m/s as shown in the figure. At the instant shown, what is its angular momentum about the point P? A) 33kg×m2/s B) 85kg×m2/s C) 110kg×m2/s D) 160kg×m2/s E) zero kg × m2/s

B) 85kg×m2/s

Which one of the following statements concerning the moment of inertia I is false? I depends on the angular acceleration of the object as it rotates.I depends on the location of the rotation axis relative to the particles that make up the object.I depends on the orientation of the rotation axis relative to the particles that make up the object.Of the particles that make up an object, the particle with the smallest mass may contribute the greatest 2 I may be expressed in units of kg × m . A) I may be expressed in units of kg x m2 B) I depends on the angular acceleration of the object as it rotates C) I depends on the location on the location of the rotation axis relative to the particles that make up the object D)I depends on the orientation of the rotation axis relative to the particles that make up that object E)Of the particles that make up an object, the particle with the smallest mass may contribute the greatest amount to I.

B) I depends on the angular acceleration of the object as it rotates

A spinning star begins to collapse under its own gravitational pull. Which one of the following occurs as the star becomes smaller? A) The star's angular velocity decreases. B) The star's angular momentum remains constant. C) The star's angular momentum increases. D) The star's angular velocity remains constant. E) Both the star's angular momentum and its angular velocity remain constant.

B) The star's angular momentum remains constant.

A hollow cylinder of mass M and radius R rolls down an inclined plane. A block of mass M easily slides down an identical inclined plane. Complete the following statement: If both objects are released at the same time from the top of their inclined planes, A) the cylinder will reach the bottom first. B) the block will reach the bottom first. C) the block will reach the bottom with the greater kinetic energy. D) the cylinder will reach the bottom with the greater kinetic energy. E) both the block and the cylinder will reach the bottom at the same time.

B) the block will reach the bottom first.

A horizontal, 10-m plank weighs 100 N. It rests on two supports that are placed 1.0 m from each end as shown in the figure. How close to one end can an 800-N person stand without causing the plank to tip? A)0 m B) 0.3 m C) 0.5 m D) 0.7 m E) 0.9 m

C) 0.5 m

A uniform disk of radius 1.2 m and mass 0.60 kg is rotating at 25 rad/s around an axis that passes through its center and is perpendicular to the disk. A rod makes contact with the rotating disk with a force of 4.5 N at a point 0.75 m from the axis of rotation as shown. The disk is brought to a stop in 5.0 s. What is the coefficient of kinetic friction for the two materials in contact? A) 0.22 B) 0.15 C) 0.64 D) 0.37 E) 0.55

C) 0.64

Two skaters, each of mass 40 kg, approach each other along parallel paths that are separated by a distance of 2 m. Both skaters have a speed of 10 m/s. The first skater carries a 2-m pole that may be considered massless. As he passes the pole, the second skater catches hold of the end. The two skaters then go around in a circle about the center of the pole. 51. What is the angular speed of the skaters after they have linked together? A) 4 rad/sB) 5 rad/s C) 10 rad/s D) 20 rad/s E) 40 rad/s

C) 10 rad/s

A hollow sphere of radius 0.25 m is rotating at 13 rad/s about an axis that passes through its center. The mass of the sphere is 3.8 kg. Assuming a constant net torque is applied to the sphere, how much work is required to bring the sphere to a stop?A) 1.0 J B) 3.8 J C) 13 J D) 25 J E) 38 J

C) 13 J

A spinning skater draws in her outstretched arms thereby reducing her moment of inertia by a factor of 2. Determine the ratio of her final kinetic energy to her initial kinetic energy. A) 0.5 B) 1 C) 2 D) 4 E) 16

C) 2

A 1.0-kg wheel in the form of a solid disk rolls along a horizontal surface with a speed of 6.0 m/s. What is the total kinetic energy of the wheel?A) 9.0 JB) 18 J C) 27 J D) 36 J E) 54 J

C) 27 J

Consider four point masses located as shown in the sketch. The acceleration due to gravity is the same everywhere. What is the x coordinate of the center of gravity for this system? A) 2.0 m B) 2.7 m C) 3.0 m D) 3.3 m E) 3.8 m

C) 3.0 m

A uniform 13-kg trap door is oriented horizontally and hinged as shown. What is the magnitude of the torque on the door at the instant that the release is activated and the door can freely rotate? A) 4.9 N × m B) 9.8 N × m C) 48 N × m D) 72 N × m E) 96 N x m

C) 48 N × m

What is the total kinetic energy of the hoop? A) 36 JB) 54 JC) 72 J D) 96 J E) 140 J

C) 72 J

A string is wrapped around a pulley of radius 0.05 m and moment of inertia 0.2 kg × m . If the string is pulled with a force magnitude of the force . A) 0.4 N B) 2 N C) 8 N D) 16 N E) 40 N

C) 8 N

The drawing shows the top view of a door that is 1.68 m wide. Two forces are applied to the door as indicated. What is the magnitude of the net torque on the door with respect to the hinge? A) 0 N × m B) 4.4N×m C) 8.3N×m D) 9.1N×m E) 11N×m

C) 8.3N×m

What happens when a spinning ice skater draws in her outstretched arms? A) Her angular momentum decreases. B) Her angular momentum increases. C) Her moment of inertia decreases causing her to speed up. D) Her moment of inertia decreases causing her to slow down. E) The torque that she exerts increases her moment of inertia.

C) Her moment of inertia decreases causing her to speed up.

A ball of mass M moves in a circular path on a horizontal, frictionless surface. It is attached to a light string that passes through a hole in the center of the table. If the string is pulled down, thereby reducing the radius of the path of the ball, the speed of the ball is observed to increase. Complete the following sentence: This occurs because A) the linear momentum of the ball is conserved. B) it is required by Newton's first law of motion. C) the angular momentum of the ball is conserved. D) the angular momentum of the ball must increase. E) the total mechanical energy of the ball must remain constant.

C) the angular momentum of the ball is conserved.

Consider the following four objects: a hoop, a flat disk, a solid sphere, and a hollow sphere. Each of the objects has mass M and radius R. The axis of rotation passes through the center of each object, and is perpendicular to the plane of the hoop and the plane of the flat disk. Which of these objects requires the largest torque to give it the same angular acceleration? A) the solid sphere B) the hollow sphere C) the hoop D) the flat disk E) both the solid and the hollow spheres

C) the hoop

Two equal spheres, labeled A and B in the figure, are attached to a massless rod with a frictionless pivot at the point P. The system is made to rotate clockwise with angular speed w on a horizontal, frictionless tabletop. Sphere A collides with and sticks to another equal sphere that is at rest on the tabletop. Note: the masses of all three spheres are equal. What is the angular speed of the system immediately after the collision? A) wB) 0.82w C) 0.60w D) 0.56w E) 0.29w

D) 0.56w

A meter stick is pivoted at the 0.50-m line. A 3.0-kg object is hung from the 0.15-m line. Where should a 5.0-kg object be hung to achieve equilibrium (the meter stick oriented horizontal and motionless)?A) 0.06-m line B) 0.24-m line C) 0.56-m line D) 0.71-m line E) A 5.0-kg object cannot be placed anywhere on the meter stick to result in equilibrium in this system.

D) 0.71-m line

A 60.0-kg skater begins a spin with an angular speed of 6.0 rad/s. By changing the position of her arms, the skater decreases her moment of inertia to one-half its initial value. What is the skater's final angular speed?A) 3.0 rad/s B) 4.5 rad/s C) 9.0 rad/s D) 12 rad/s E) 18 rad/s

D) 12 rad/s

A rider on a motorcycle that has a mass of 195 kg is traveling with a speed of 24 m/s. Each of the 2 two wheels of the motorcycle has a radius of 0.29 m and a moment of inertia of 0.46 kg × m . What is the approximate total rotational kinetic energy of the wheels?A) 800JB) 1100 J C) 1500 J D) 3200 J E) 4100 J

D) 3200 J

In the drawing shown, the large wheel has a radius of 7.1 m. A rope is wrapped around the edge of the wheel and a 7.6 kg-box hangs from the rope. A smaller disk of radius 1.38 m is attached to the wheel. A rope is wrapped around the edge of the disk as shown. An axis of rotation passes through the center of the wheel-disk system. What is the value of the mass M that will prevent the wheel from rotating? A) 34 kg B) 12 kg C) 17kg D) 39kg E) 46 kg

D) 39kg

A 3.0-kg ball and a 1.0-kg ball are placed at opposite ends of a massless beam so that the system is in equilibrium as shown. Note: The drawing is not drawn to scale. What is the value of the ratio of the lengths, b/a? A) 2.0 B) 2.5 C) 3.0 D) 4.0 E) 5.0

D) 4.0

A 66-N × m torque acts on a wheel with a moment of inertia 175 kg × m . If the wheel starts from rest, how long will it take the wheel to make one revolution? A) 0.37 sB) 0.71 sC) 2.4 s D) 5.8s E) 6.9s

D) 5.8s

A child standing on the edge of a freely spinning merry-go-round moves quickly to the center.Which one of the following statements is necessarily true concerning this event and why? A) The angular speed of the system decreases because the moment of inertia of the system has increased. B) The angular speed of the system increases because the moment of inertia of the system has increased. C) The angular speed of the system decreases because the moment of inertia of the system has decreased. D) The angular speed of the system increases because the moment of inertia of the system has decreased. E) The angular speed of the system remains the same because the net torque on the merry-go-round is zero N × m.

D) The angular speed of the system increases because the moment of inertia of the system has decreased.

A compact disc rotates about its center at constant angular speed. Which one of the following quantities is constant and non-zero for a dust particle near the edge of the disc? A) linear velocity B) torque about the center of the disc C) centripetal acceleration D) angular momentum E) angular acceleration

D) angular momentum

Complete the following statement: A body is in translational equilibrium A) only if it is at rest. B) only if it is moving with constant velocity. C) only if it is moving with constant acceleration. D) if it is either at rest or moving with constant velocity. E) if it is moving with either constant velocity or constant acceleration.

D) if it is either at rest or moving with constant velocity

Planets A and B are uniform solid spheres that rotate at a constant speed about axes through their centers. Although B has twice the mass and three times the radius of A, each planet has the same rotational kinetic energy. What is the ratio wB/wA of their angular speeds?A) 0.055 B) 0.093 C) 0.165 D) 0.191 E) 0.236

E) 0.236

What, approximately, is the magnitude of the downward force exerted on the fulcrum? A) zero newtonsB) 100 NC) 600 N D) 800 N E) 1000 N

E) 1000 N

A ceiling fan has five blades, each with a mass of 0.34 kg and a length of 0.66 m. The fan is operating in its "low" setting at which the angular speed is 9.4 rad/s. If the blades can be approximated as uniform thin rods that rotate about one end, what is the total rotational kinetic energy of the five blades? A) 35 J B) 29 J C) 23 J D) 17 J E) 11 J

E) 11 J

A 1500-kg satellite orbits a planet in a circular orbit of radius 6.2 × 106 m. What is the angular momentum of the satellite in its orbit around the planet if the satellite completes one orbit every 1.5 × 104 s? A)3.9 × 106 kg × m2/s B)1.4 × 1014 kg × m2/s C)6.2 × 108 kg × m2/s D)8.1 × 1011 kg × m2/s E)2.4 × 1013 kg × m2/s

E) 2.4 x 10^13 kg x m2

A solid sphere rolls without slipping along a horizontal surface. What percentage of its total kinetic energy is rotational kinetic energy?A) 33 %B) 50 % C) 12 % D) 75 % E) 29 %

E) 29 %

A solid sphere of radius R rotates about a diameter with an angular speed w. The sphere then collapses under the action of internal forces to a final radius R/2. What is the final angular speed of the sphere?A) w/4 B) w/2 C) w D) 2w E) 4w

E) 4w

What is their combined angular momentum about the center of the pole? A) 2 kg × m2/s B)40 kg × m2/s C) 80 kg × m2/s D)400 kg × m2/s E) 800 kg × m2/s

E) 800 kg × m2/s

Which one of the following statements most accurately describes the center of gravity of an object? A) It is the point where gravity acts on the object. B) It is the point where all the mass is concentrated. C) It must be experimentally determined for all objects. D) It is the point on the object where all the weight is concentrated. E) It is the point from which the torque produced by the weight of the object can be calculated.

E) It is the point from which the torque produced by the weight of the object can be calculated.

Complete the following statement: When a net torque is applied to a rigid object, it always produces a A) constant acceleration .B) rotational equilibrium. C) constant angular velocity. D) constant angular momentum. E) change in angular velocity.

E) change in angular velocity

A massless frame in the shape of a square with 2-m sides has a 1-kg ball at each corner. What is the moment of inertia of the four balls about an axis through the corner marked O and perpendicular to the plane of the paper? A)4 kg × m2 B)8 kg × m2 C)10 kg × m2 D)12 kg × m2 E)16 kg × m2

E)16 kg × m2

Three objects are attached to a massless rigid rod that has an axis of rotation as shown. Assuming all of the mass of each object is located at the point shown for each, calculate the moment of inertia of this system. A)1.3 kg × m2 B) 3.1 kg × m2 C)5.3 kg × m2 D)7.2 kg × m2 E)9.1 kg × m2

E)9.1 kg × m2