check your understanding - Module 13 - WLAN Configuration

Réussis tes devoirs et examens dès maintenant avec Quizwiz!

A user has just purchased a generic home router and would like to secure it. What should be done to help secure the wireless home router?

change the default admin password The home router allows a designated administrator to manage the network. Anyone who knows the account username and password can log into the router itself, which grants complete access to the features of the device and information about any devices that are connected. Most router manufacturers configure their new routers with the same default username and password and thus changing the default administrator password is a step towards securing the home router.

When a wireless network in a small office is being set up, which type of IP addressing is typically used on the networked devices?

private In setting up the wireless network in a small office, it is a best practice to use private IP addressing because of the flexibility and easy management it offers.

What is a difference between autonomous APs that operate in a home environment and controller-based APs that operate in a corporate environment?

Controller-based APs can be automatically configured and managed by a WLAN controller. Autonomous APs are standalone devices that are configured via Cisco CLI or a GUI. Controller-based APs are server-dependent devices that require no initial configuration to operate, because they are automatically configured and managed by a WLAN controller. Most autonomous and controller-based APs support PoE.

A user is configuring a wireless access point and wants to prevent any neighbors from discovering the network. What action does the user need to take?

Disable SSID broadcast Disabling SSID broadcast prevents the access point from announcing the name of the network. Enabling WPA encryption, configuring DMZ settings, and configuring a DNS server will accomplish different tasks, but the name of the network will still be announced.

A laptop cannot connect to a wireless access point. Which two troubleshooting steps should be taken first? (Choose two.)

Ensure that the wireless NIC is enabled. Ensure that the wireless SSID is chosen. A wireless laptop normally does not have an antenna attached unless a repair has recently been implemented. If the wireless NIC is enabled, the correct media, radio, will be used. When the NIC detects an access point, the correct frequency is automatically used.

Which WLC tab would a network administrator typically use to see a summary view of the most heavily used WLANs including the number of clients using a particular WLAN?

Monitor Use the Monitor tab and then the Summary option to see information about the WLC, including the IP address and system uptime as well as information associated with the top WLANs configured and active within the organization.

In setting up a small office network, the network administrator decides to assign private IP addresses dynamically to workstations and mobile devices. Which feature must be enabled on the company router in order for office devices to access the internet?

NAT (network address translation) Network Address Translation (NAT) is the process used to convert private addresses to internet-routable addresses that allow office devices to access the internet.

What functionality is required on routers to provide remote workers with VoIP and videoconferencing capabilities?

QoS Quality of service (QoS) needs to be enabled on routers to provide support for VoIP and videoconferencing. QoS refers to the capability of a network to provide better service to selected network traffic, as required by voice and video applications.

Which protocol could be used by a company to monitor devices such as a wireless LAN controller (WLC)?

SNMP Simple Network Management Protocol (SNMP) is a networking protocol used for the management and monitoring of network-connected devices in Internet Protocol networks.

Users on an IEEE 802.11n network are complaining of slow speeds. The network administrator checks the AP and verifies it is operating properly. What can be done to improve the wireless performance in the network?

Split the wireless traffic between the 802.11n 2.4 GHz band ad the 5 GHz band. The easiest way to improve wireless performance is to split the 802.11n wireless traffic between the 2.4 GHz band and the 5 GHz band. IEEE 802.11n networks can use the two bands as two separate wireless networks to help manage the traffic.

A wireless router is displaying the IP address of 192.168.0.1. What could this mean?

The wireless router still has the factory default IP address. Wireless routers usually come with factory default settings. The IP address is often set to 192.168.0.1. The default username and password are often admin. The IP address, username, and password should all be modified to help secure the router.

A customer installs a wireless access point at home in the closet next to the kitchen. The customer mentions that the wireless communication performance seems degraded when the cordless phone or the microwave oven is in use. What is the possible reason for this degradation?

The wireless signal is in the same radio frequency range as the household devices are in. Because wireless networks use air as a medium, interference from other sources commonly cause degradation issues. Sources can include cordless phones, fluorescent lighting, microwave ovens, and other wireless devices that use the same frequencies.

When configuring a Cisco 3500 series wireless LAN controller (WLC) for a WPA2 Enterprise WLAN, what has to be created on the WLC before creating the new WLAN?

a VLAN for the wireless network On a Cisco 3500 series wireless controller, a new interface for each new wireless network controlled by the WLC must be created. The interface and VLAN are created before configuring the wireless network.

What is a DHCP scope as it relates to a WLAN configured on the WLC controller?

a pool of IP addresses for WLAN clients. When configuring a WLC controller as a DHCP server, use the DHCP Scope menu option to configure IP address-related settings such as the range of IP addresses to assign to WLAN devices, a DNS server address, and lease time.

Why would a technician configure a passphrase for a WLAN on a wireless router?

to configure wireless client authentication. When a WLAN on a wireless router is being configured, a passphrase is used in the wireless security settings for a specific security mode. Clients must be configured for the same security mode and the same passphrase in order to access the WLAN.


Ensembles d'études connexes

11.1 familiar commands - affirmativos y negativos de estos verbos y Prática 1 - Completar

View Set

symbols to cut & paste in quizlet

View Set

Unit 6: Common Interest Ownership Types

View Set

English Discoveries- At the doctor

View Set

Generic Corporate Finance Questions

View Set

Ch 59 Male Reproductive Disorders

View Set

Prioritization, delegation, & assignment: Diabetes Mellitus

View Set