Code Test 1
Conductor sizes are expressed in two different measurements
AWG / Circular Mils
The conductors and equipment required or permitted by this code shall be acceptable only if ________?
Approved. 110.2
weatherproof
Constructed or protected so that exposure to the weather will not interfere with successful operation.
watertight
Constructed so that moisture will not enter the enclosure under specified test conditions.
Raintight
Constructed, protected so that exposure to a beating rain will not result in the entrance of water under specified test conditions
Rainproof
Constructed, protected, or treated so as to prevent rain from interfering with the successful operation of the apparatus under specified test conditions.
The Code applies to which of the following installations?
Floating buildings 90.2(A)(1)
Listed or labeled equipment shall be installed and used in accordance with any ______ included in the listing or labeling.
Instructions 110.3(B)
Access and working space shall be provided and maintained about all electrical equipment to permit ready and safe operation and _____ of such equipment
Maintenance 110.26
Which book contains the standard practice of good workmanship in electrical construction and other ANSI approved installation standard?
NECA 1-2015
Code enforcement is the responsibility of the ? .
authority having jurisdiction 90.4
It is the intent of the Code that ? internal wiring or the construction of equipment need not be inspected at the time of installation, except to detect alterations or damage if the equipment has been listed by a qualified electrical testing laboratory.
factory installed 90.7
The statement "The practical safeguarding of persons and property from hazards arising from the use of electricity" best describes the ? .
purpose of the Code 90.1(A)
Mandatory rules of this Code are characterized by the use of the word ? .
shall 90.5(A)